patch-1.3.26 linux/include/linux/scsi.h
Next file: linux/include/linux/smp.h
Previous file: linux/include/linux/sched.h
Back to the patch index
Back to the overall index
- Lines: 199
- Date:
Sun Sep 10 09:37:21 1995
- Orig file:
v1.3.25/linux/include/linux/scsi.h
- Orig date:
Thu Jan 1 02:00:00 1970
diff -u --recursive --new-file v1.3.25/linux/include/linux/scsi.h linux/include/linux/scsi.h
@@ -0,0 +1,198 @@
+#ifndef _LINUX_SCSI_H
+#define _LINUX_SCSI_H
+
+/*
+ * This header file contains public constants and structures used by
+ * the scsi code for linux.
+ */
+
+/*
+ $Header: /usr/src/linux/include/linux/RCS/scsi.h,v 1.3 1993/09/24 12:20:33 drew Exp $
+
+ For documentation on the OPCODES, MESSAGES, and SENSE values,
+ please consult the SCSI standard.
+
+*/
+
+/*
+ * SCSI opcodes
+ */
+
+#define TEST_UNIT_READY 0x00
+#define REZERO_UNIT 0x01
+#define REQUEST_SENSE 0x03
+#define FORMAT_UNIT 0x04
+#define READ_BLOCK_LIMITS 0x05
+#define REASSIGN_BLOCKS 0x07
+#define READ_6 0x08
+#define WRITE_6 0x0a
+#define SEEK_6 0x0b
+#define READ_REVERSE 0x0f
+#define WRITE_FILEMARKS 0x10
+#define SPACE 0x11
+#define INQUIRY 0x12
+#define RECOVER_BUFFERED_DATA 0x14
+#define MODE_SELECT 0x15
+#define RESERVE 0x16
+#define RELEASE 0x17
+#define COPY 0x18
+#define ERASE 0x19
+#define MODE_SENSE 0x1a
+#define START_STOP 0x1b
+#define RECEIVE_DIAGNOSTIC 0x1c
+#define SEND_DIAGNOSTIC 0x1d
+#define ALLOW_MEDIUM_REMOVAL 0x1e
+
+#define SET_WINDOW 0x24
+#define READ_CAPACITY 0x25
+#define READ_10 0x28
+#define WRITE_10 0x2a
+#define SEEK_10 0x2b
+#define WRITE_VERIFY 0x2e
+#define VERIFY 0x2f
+#define SEARCH_HIGH 0x30
+#define SEARCH_EQUAL 0x31
+#define SEARCH_LOW 0x32
+#define SET_LIMITS 0x33
+#define PRE_FETCH 0x34
+#define READ_POSITION 0x34
+#define SYNCHRONIZE_CACHE 0x35
+#define LOCK_UNLOCK_CACHE 0x36
+#define READ_DEFECT_DATA 0x37
+#define MEDIUM_SCAN 0x38
+#define COMPARE 0x39
+#define COPY_VERIFY 0x3a
+#define WRITE_BUFFER 0x3b
+#define READ_BUFFER 0x3c
+#define UPDATE_BLOCK 0x3d
+#define READ_LONG 0x3e
+#define WRITE_LONG 0x3f
+#define CHANGE_DEFINITION 0x40
+#define WRITE_SAME 0x41
+#define LOG_SELECT 0x4c
+#define LOG_SENSE 0x4d
+#define MODE_SELECT_10 0x55
+#define MODE_SENSE_10 0x5a
+#define READ_12 0xa8
+#define WRITE_12 0xaa
+#define WRITE_VERIFY_12 0xae
+#define SEARCH_HIGH_12 0xb0
+#define SEARCH_EQUAL_12 0xb1
+#define SEARCH_LOW_12 0xb2
+#define SEND_VOLUME_TAG 0xb6
+#define WRITE_LONG_2 0xea
+
+/*
+ * Status codes
+ */
+
+#define GOOD 0x00
+#define CHECK_CONDITION 0x01
+#define CONDITION_GOOD 0x02
+#define BUSY 0x04
+#define INTERMEDIATE_GOOD 0x08
+#define INTERMEDIATE_C_GOOD 0x0a
+#define RESERVATION_CONFLICT 0x0c
+#define QUEUE_FULL 0x1a
+
+#define STATUS_MASK 0x1e
+
+/*
+ * SENSE KEYS
+ */
+
+#define NO_SENSE 0x00
+#define RECOVERED_ERROR 0x01
+#define NOT_READY 0x02
+#define MEDIUM_ERROR 0x03
+#define HARDWARE_ERROR 0x04
+#define ILLEGAL_REQUEST 0x05
+#define UNIT_ATTENTION 0x06
+#define DATA_PROTECT 0x07
+#define BLANK_CHECK 0x08
+#define COPY_ABORTED 0x0a
+#define ABORTED_COMMAND 0x0b
+#define VOLUME_OVERFLOW 0x0d
+#define MISCOMPARE 0x0e
+
+
+/*
+ * DEVICE TYPES
+ */
+
+#define TYPE_DISK 0x00
+#define TYPE_TAPE 0x01
+#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
+#define TYPE_WORM 0x04 /* Treated as ROM by our system */
+#define TYPE_ROM 0x05
+#define TYPE_SCANNER 0x06
+#define TYPE_MOD 0x07 /* Magneto-optical disk -
+ * - treated as TYPE_DISK */
+#define TYPE_NO_LUN 0x7f
+
+
+/*
+ * MESSAGE CODES
+ */
+
+#define COMMAND_COMPLETE 0x00
+#define EXTENDED_MESSAGE 0x01
+#define EXTENDED_MODIFY_DATA_POINTER 0x00
+#define EXTENDED_SDTR 0x01
+#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */
+#define EXTENDED_WDTR 0x03
+#define SAVE_POINTERS 0x02
+#define RESTORE_POINTERS 0x03
+#define DISCONNECT 0x04
+#define INITIATOR_ERROR 0x05
+#define ABORT 0x06
+#define MESSAGE_REJECT 0x07
+#define NOP 0x08
+#define MSG_PARITY_ERROR 0x09
+#define LINKED_CMD_COMPLETE 0x0a
+#define LINKED_FLG_CMD_COMPLETE 0x0b
+#define BUS_DEVICE_RESET 0x0c
+
+#define INITIATE_RECOVERY 0x0f /* SCSI-II only */
+#define RELEASE_RECOVERY 0x10 /* SCSI-II only */
+
+#define SIMPLE_QUEUE_TAG 0x20
+#define HEAD_OF_QUEUE_TAG 0x21
+#define ORDERED_QUEUE_TAG 0x22
+
+/*
+ * Here are some scsi specific ioctl commands which are sometimes useful.
+ */
+/* These are a few other constants only used by scsi devices */
+
+#define SCSI_IOCTL_GET_IDLUN 0x5382
+
+/* Used to turn on and off tagged queuing for scsi devices */
+
+#define SCSI_IOCTL_TAGGED_ENABLE 0x5383
+#define SCSI_IOCTL_TAGGED_DISABLE 0x5384
+
+/* Used to obtain the host number of a device. */
+#define SCSI_IOCTL_PROBE_HOST 0x5385
+
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only. This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 4
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -4
+ * c-argdecl-indent: 4
+ * c-label-offset: -4
+ * c-continued-statement-offset: 4
+ * c-continued-brace-offset: 0
+ * indent-tabs-mode: nil
+ * tab-width: 8
+ * End:
+ */
+
+#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov
with Sam's (original) version of this