patch-1.3.30 linux/arch/alpha/kernel/time.c

• Lines: 220
• Date: Mon Sep 25 15:30:36 1995
• Orig file: v1.3.29/linux/arch/alpha/kernel/time.c
• Orig date: Thu Jan 1 02:00:00 1970

diff -u --recursive --new-file v1.3.29/linux/arch/alpha/kernel/time.c linux/arch/alpha/kernel/time.c
@@ -0,0 +1,219 @@
+/*
+ *  linux/arch/alpha/kernel/time.c
+ *
+ *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ *
+ * This file contains the PC-specific time handling details:
+ * reading the RTC at bootup, etc..
+ * 1994-07-02    Alan Modra
+ *	fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
+ * 1995-03-26    Markus Kuhn
+ *      fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
+ *      precision CMOS clock update
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+
+#include <linux/mc146818rtc.h>
+#include <linux/timex.h>
+
+#define TIMER_IRQ 0
+
+static int set_rtc_mmss(unsigned long);
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+static void timer_interrupt(int irq, struct pt_regs * regs)
+{
+	/* last time the cmos clock got updated */
+	static long last_rtc_update=0;
+
+	do_timer(regs);
+
+	/*
+	 * If we have an externally synchronized Linux clock, then update
+	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+	 * called as close as possible to 500 ms before the new second starts.
+	 */
+	if (time_state != TIME_BAD && xtime.tv_sec > last_rtc_update + 660 &&
+	    xtime.tv_usec > 500000 - (tick >> 1) &&
+	    xtime.tv_usec < 500000 + (tick >> 1))
+	  if (set_rtc_mmss(xtime.tv_sec) == 0)
+	    last_rtc_update = xtime.tv_sec;
+	  else
+	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
+}
+
+/* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
+ * Assumes input in normal date format, i.e. 1980-12-31 23:59:59
+ * => year=1980, mon=12, day=31, hour=23, min=59, sec=59.
+ *
+ * [For the Julian calendar (which was used in Russia before 1917,
+ * Britain & colonies before 1752, anywhere else before 1582,
+ * and is still in use by some communities) leave out the
+ * -year/100+year/400 terms, and add 10.]
+ *
+ * This algorithm was first published by Gauss (I think).
+ *
+ * WARNING: this function will overflow on 2106-02-07 06:28:16 on
+ * machines were long is 32-bit! (However, as time_t is signed, we
+ * will already get problems at other places on 2038-01-19 03:14:08)
+ */
+static inline unsigned long mktime(unsigned int year, unsigned int mon,
+	unsigned int day, unsigned int hour,
+	unsigned int min, unsigned int sec)
+{
+	if (0 >= (int) (mon -= 2)) {	/* 1..12 -> 11,12,1..10 */
+		mon += 12;	/* Puts Feb last since it has leap day */
+		year -= 1;
+	}
+	return (((
+	    (unsigned long)(year/4 - year/100 + year/400 + 367*mon/12 + day) +
+	      year*365 - 719499
+	    )*24 + hour /* now have hours */
+	   )*60 + min /* now have minutes */
+	  )*60 + sec; /* finally seconds */
+}
+
+void time_init(void)
+{
+	unsigned int year, mon, day, hour, min, sec;
+	int i;
+
+	/* The Linux interpretation of the CMOS clock register contents:
+	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+	 * RTC registers show the second which has precisely just started.
+	 * Let's hope other operating systems interpret the RTC the same way.
+	 */
+	/* read RTC exactly on falling edge of update flag */
+	for (i = 0 ; i < 1000000 ; i++)	/* may take up to 1 second... */
+		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
+			break;
+	for (i = 0 ; i < 1000000 ; i++)	/* must try at least 2.228 ms */
+		if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+			break;
+	do { /* Isn't this overkill ? UIP above should guarantee consistency */
+		sec = CMOS_READ(RTC_SECONDS);
+		min = CMOS_READ(RTC_MINUTES);
+		hour = CMOS_READ(RTC_HOURS);
+		day = CMOS_READ(RTC_DAY_OF_MONTH);
+		mon = CMOS_READ(RTC_MONTH);
+		year = CMOS_READ(RTC_YEAR);
+	} while (sec != CMOS_READ(RTC_SECONDS));
+	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+	  {
+	    BCD_TO_BIN(sec);
+	    BCD_TO_BIN(min);
+	    BCD_TO_BIN(hour);
+	    BCD_TO_BIN(day);
+	    BCD_TO_BIN(mon);
+	    BCD_TO_BIN(year);
+	  }
+#ifdef ALPHA_PRE_V1_2_SRM_CONSOLE
+	/*
+	 * The meaning of life, the universe, and everything. Plus
+	 * this makes the year come out right on SRM consoles earlier
+	 * than v1.2.
+	 */
+	year -= 42;
+#endif
+	if ((year += 1900) < 1970)
+		year += 100;
+	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
+	xtime.tv_usec = 0;
+	if (request_irq(TIMER_IRQ, timer_interrupt, 0, "timer") != 0)
+		panic("Could not allocate timer IRQ!");
+}
+
+/*
+ * We could get better timer accuracy by using the alpha
+ * time counters or something.  Now this is limited to
+ * the HZ clock frequency.
+ */
+void do_gettimeofday(struct timeval *tv)
+{
+	unsigned long flags;
+
+	save_flags(flags);
+	cli();
+	*tv = xtime;
+	restore_flags(flags);
+}
+
+void do_settimeofday(struct timeval *tv)
+{
+	cli();
+	xtime = *tv;
+	time_state = TIME_BAD;
+	time_maxerror = 0x70000000;
+	time_esterror = 0x70000000;
+	sti();
+}
+
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ */
+static int set_rtc_mmss(unsigned long nowtime)
+{
+	int retval = 0;
+	int real_seconds, real_minutes, cmos_minutes;
+	unsigned char save_control, save_freq_select;
+
+	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
+	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
+	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+	cmos_minutes = CMOS_READ(RTC_MINUTES);
+	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+		BCD_TO_BIN(cmos_minutes);
+
+	/*
+	 * since we're only adjusting minutes and seconds,
+	 * don't interfere with hour overflow. This avoids
+	 * messing with unknown time zones but requires your
+	 * RTC not to be off by more than 15 minutes
+	 */
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+		real_minutes += 30;		/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+			BIN_TO_BCD(real_seconds);
+			BIN_TO_BCD(real_minutes);
+		}
+		CMOS_WRITE(real_seconds,RTC_SECONDS);
+		CMOS_WRITE(real_minutes,RTC_MINUTES);
+	} else
+		retval = -1;
+
+	/* The following flags have to be released exactly in this order,
+	 * otherwise the DS12887 (popular MC146818A clone with integrated
+	 * battery and quartz) will not reset the oscillator and will not
+	 * update precisely 500 ms later. You won't find this mentioned in
+	 * the Dallas Semiconductor data sheets, but who believes data
+	 * sheets anyway ...                           -- Markus Kuhn
+	 */
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+	return retval;
+}