patch-1.3.37 linux/drivers/net/3c503.h
Next file: linux/drivers/net/arcnet.c
Previous file: linux/drivers/net/3c503.c
Back to the patch index
Back to the overall index
- Lines: 50
- Date:
Wed Oct 25 20:51:21 1995
- Orig file:
v1.3.36/linux/drivers/net/3c503.h
- Orig date:
Wed Oct 4 14:14:30 1995
diff -u --recursive --new-file v1.3.36/linux/drivers/net/3c503.h linux/drivers/net/3c503.h
@@ -12,10 +12,14 @@
#define OLD_3COM_ID 0x02608c
#define NEW_3COM_ID 0x0020af
-/* Shared memory management parameters */
-
-#define EL2SM_START_PG (0x20) /* First page of TX buffer */
-#define EL2SM_STOP_PG (0x40) /* Last page +1 of RX ring */
+/* Shared memory management parameters. NB: The 8 bit cards have only
+ one bank (MB1) which serves both Tx and Rx packet space. The 16bit
+ cards have 2 banks, MB0 for Tx packets, and MB1 for Rx packets.
+ You choose which bank appears in the sh. mem window with EGACFR_MBSn */
+
+#define EL2_MB0_START_PG (0x00) /* EL2/16 Tx packets go in bank 0 */
+#define EL2_MB1_START_PG (0x20) /* First page of bank 1 */
+#define EL2_MB1_STOP_PG (0x40) /* Last page +1 of bank 1 */
/* 3Com 3c503 ASIC registers */
#define E33G_STARTPG (EL2H+0) /* Start page, matching EN0_STARTPG */
@@ -60,7 +64,28 @@
/* Bits in E33G_GACFR register: */
-#define EGACFR_NORM (0x49) /* Enable 8K shared mem, no DMA TC int */
-#define EGACFR_IRQOFF (0xc9) /* Above, and disable 8390 IRQ line */
+#define EGACFR_NIM (0x80) /* NIC interrupt mask */
+#define EGACFR_TCM (0x40) /* DMA term. count interrupt mask */
+#define EGACFR_RSEL (0x08) /* Map a bank of card mem into system mem */
+#define EGACFR_MBS2 (0x04) /* Memory bank select, bit 2. */
+#define EGACFR_MBS1 (0x02) /* Memory bank select, bit 1. */
+#define EGACFR_MBS0 (0x01) /* Memory bank select, bit 0. */
+
+#define EGACFR_NORM (0x49) /* TCM | RSEL | MBS0 */
+#define EGACFR_IRQOFF (0xc9) /* TCM | RSEL | MBS0 | NIM */
+
+/*
+ MBS2 MBS1 MBS0 Sh. mem windows card mem at:
+ ---- ---- ---- -----------------------------
+ 0 0 0 0x0000 -- bank 0
+ 0 0 1 0x2000 -- bank 1 (only choice for 8bit card)
+ 0 1 0 0x4000 -- bank 2, not used
+ 0 1 1 0x6000 -- bank 3, not used
+
+There was going to be a 32k card that used bank 2 and 3, but it
+never got produced.
+
+*/
+
/* End of 3C503 parameter definitions */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov
with Sam's (original) version of this