patch-1.3.4 linux/arch/sparc/config.in

• Lines: 202
• Date: Mon Jun 12 03:58:31 1995
• Orig file: v1.3.3/linux/arch/sparc/config.in
• Orig date: Fri Apr 28 11:17:56 1995

diff -u --recursive --new-file v1.3.3/linux/arch/sparc/config.in linux/arch/sparc/config.in
@@ -9,12 +9,12 @@
 # see the Configure script.
 #
 
+echo "#define CONFIG_SPARCDEVS 1" >> $CONFIG_H
+echo "CONFIG_SPARCDEVS=y" >> $CONFIG
+
 comment 'Sparc Kernel setup'
 
-bool 'Sparc V8 kernel' CONFIG_SPARC_V8 y
-bool 'Sparc SMP support' CONFIG_LINUX_SMP n
-bool 'Sparc SUN4M support' CONFIG_SUN4M n
-bool 'Sparc Reference MMU' CONFIG_SRMMU n
+bool 'Sun floppy controller support' CONFIG_BLK_DEV_SUNFD n
 bool 'Networking support' CONFIG_NET n
 bool 'Limit memory to low 16MB' CONFIG_MAX_16M n
 bool 'System V IPC' CONFIG_SYSVIPC y
@@ -57,26 +57,8 @@
 
 comment 'SCSI low-level drivers'
 
-bool 'Adaptec AHA152X support' CONFIG_SCSI_AHA152X n
-bool 'Adaptec AHA1542 support' CONFIG_SCSI_AHA1542 y
-bool 'Adaptec AHA1740 support' CONFIG_SCSI_AHA1740 n
-bool 'Adaptec AHA274X/284X support' CONFIG_SCSI_AHA274X n
-bool 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC n
-bool 'UltraStor 14F/34F support' CONFIG_SCSI_U14_34F n
-bool 'Future Domain 16xx SCSI support' CONFIG_SCSI_FUTURE_DOMAIN n
-bool 'Generic NCR5380 SCSI support' CONFIG_SCSI_GENERIC_NCR5380 n
-if [ "$CONFIG_PCI" = "y" ]; then
-  bool 'NCR53c7,8xx SCSI support'  CONFIG_SCSI_NCR53C7xx n
-fi
-bool 'Always IN2000 SCSI support (test release)' CONFIG_SCSI_IN2000 n
-bool 'PAS16 SCSI support' CONFIG_SCSI_PAS16 n
-bool 'QLOGIC SCSI support' CONFIG_SCSI_QLOGIC n
-bool 'Seagate ST-02 and Future Domain TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE n
-bool 'Trantor T128/T128F/T228 SCSI support' CONFIG_SCSI_T128 n
-bool 'UltraStor SCSI support' CONFIG_SCSI_ULTRASTOR n
-bool '7000FASST SCSI support' CONFIG_SCSI_7000FASST n
-bool 'EATA ISA/EISA (DPT PM2011/021/012/022/122/322) support' CONFIG_SCSI_EATA n
-#bool 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG n
+bool 'Sun ESP Scsi support' CONFIG_SCSI_SUN_ESP n
+
 fi
 
 
@@ -100,143 +82,42 @@
 bool 'PPP (point-to-point) support' CONFIG_PPP n
 bool 'PLIP (parallel port) support' CONFIG_PLIP n
 bool 'Load balancing support (experimental)' CONFIG_SLAVE_BALANCING n
-bool 'Do you want to be offered ALPHA test drivers' CONFIG_NET_ALPHA n
-bool 'Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC n
-if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then
-	bool 'WD80*3 support' CONFIG_WD80x3 n
-	bool 'SMC Ultra support' CONFIG_ULTRA n
-fi
-bool 'AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE n
-bool '3COM cards' CONFIG_NET_VENDOR_3COM y
-if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then
-	bool '3c501 support' CONFIG_EL1 n
-	bool '3c503 support' CONFIG_EL2 n
-	if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-		bool '3c505 support' CONFIG_ELPLUS n
-		bool '3c507 support' CONFIG_EL16 n
-	fi
-	bool '3c509/3c579 support' CONFIG_EL3 y
-fi
-bool 'Other ISA cards' CONFIG_NET_ISA n
-if [ "$CONFIG_NET_ISA" = "y" ]; then
-	bool 'Cabletron E21xx support' CONFIG_E2100 n
-	bool 'DEPCA support' CONFIG_DEPCA n
-	bool 'EtherWorks 3 support' CONFIG_EWRK3 n
-	if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-#		bool 'Arcnet support' CONFIG_ARCNET n
-		bool 'AT1700 support' CONFIG_AT1700 n
-#		bool 'EtherExpressPro support' CONFIG_EEXPRESS_PRO n
-		bool 'EtherExpress support' CONFIG_EEXPRESS n
-		bool 'NI5210 support' CONFIG_NI52 n
-		bool 'NI6510 support' CONFIG_NI65 n
-	fi
-	bool 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS n
-	bool 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN n
-	bool 'NE2000/NE1000 support' CONFIG_NE2000 y
-	bool 'SK_G16 support' CONFIG_SK_G16 n
-fi
-bool 'EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA n
-if [ "$CONFIG_NET_EISA" = "y" ]; then
-	if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-		bool 'Ansel Communications EISA 3200 support' CONFIG_AC3200 n
-	fi
-	bool 'Apricot Xen-II on board ethernet' CONFIG_APRICOT n
-#	bool 'DEC 21040 PCI support' CONFIG_DEC_ELCP n
-#	bool 'LPL T100V 100Mbs support' CONFIG_LPL_T100 n
-#	bool 'PCnet32 (32 bit VLB and PCI LANCE) support' CONFIG_PCNET32 n
-	bool 'Zenith Z-Note support' CONFIG_ZNET y
-fi
-bool 'Pocket and portable adaptors' CONFIG_NET_POCKET n
-if [ "$CONFIG_NET_POCKET" = "y" ]; then
-	bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP n
-	bool 'D-Link DE600 pocket adaptor support' CONFIG_DE600 n
-	bool 'D-Link DE620 pocket adaptor support' CONFIG_DE620 n
-#	bool 'Silicom pocket adaptor support' CONFIG_SILICOM_PEA n
-#	bool 'WaveLAN PCMCIA support' CONFIG_WaveLAN n
-#	bool '3 Com 3c589 PCMCIA support' CONFIG_3C589 n
-fi
-fi
-fi
-
-comment 'CD-ROM drivers (not for SCSI or IDE/ATAPI drives)'
-
-bool 'Sony CDU31A/CDU33A CDROM driver support' CONFIG_CDU31A n
-bool 'Mitsumi (not IDE/ATAPI) CDROM driver support' CONFIG_MCD n
-bool 'Matsushita/Panasonic CDROM driver support' CONFIG_SBPCD n
-if [ "$CONFIG_SBPCD" = "y" ]; then
-  bool 'Matsushita/Panasonic second CDROM controller support' CONFIG_SBPCD2 n
-  if [ "$CONFIG_SBPCD2" = "y" ]; then
-    bool 'Matsushita/Panasonic third CDROM controller support' CONFIG_SBPCD3 n
-    if [ "$CONFIG_SBPCD3" = "y" ]; then
-      bool 'Matsushita/Panasonic fourth CDROM controller support' CONFIG_SBPCD4 n
-    fi
-  fi
+bool 'Sun LANCE Ethernet support' CONFIG_SUN_LANCE n
+bool 'Sun Intel Ethernet support' CONFIG_SUN_INTEL n
+fi
 fi
-bool 'Aztech/Orchid/Okano/Wearnes (non IDE) CDROM support' CONFIG_AZTCD n
 
 comment 'Filesystems'
 
-bool 'Standard (minix) fs support' CONFIG_MINIX_FS y
-bool 'Extended fs support' CONFIG_EXT_FS y
+bool 'Standard (minix) fs support' CONFIG_MINIX_FS n
+bool 'Extended fs support' CONFIG_EXT_FS n
 bool 'Second extended fs support' CONFIG_EXT2_FS y
-bool 'xiafs filesystem support' CONFIG_XIA_FS y
-bool 'msdos fs support' CONFIG_MSDOS_FS y
-if [ "$CONFIG_MSDOS_FS" = "y" ]; then
-bool 'umsdos: Unix like fs on top of std MSDOS FAT fs' CONFIG_UMSDOS_FS n
-fi
+bool 'xiafs filesystem support' CONFIG_XIA_FS n
+bool 'msdos fs support' CONFIG_MSDOS_FS n
 bool '/proc filesystem support' CONFIG_PROC_FS n
 if [ "$CONFIG_INET" = "y" ]; then
 bool 'NFS filesystem support' CONFIG_NFS_FS n
 fi
 if [ "$CONFIG_BLK_DEV_SR" = "y" -o "$CONFIG_CDU31A" = "y" -o "$CONFIG_MCD" = "y" -o "$CONFIG_SBPCD" = "y" -o "$CONFIG_BLK_DEV_IDECD" = "y" ]; then
-	bool 'ISO9660 cdrom filesystem support' CONFIG_ISO9660_FS y
+	bool 'ISO9660 cdrom filesystem support' CONFIG_ISO9660_FS n
 else
 	bool 'ISO9660 cdrom filesystem support' CONFIG_ISO9660_FS n
 fi
 bool 'OS/2 HPFS filesystem support (read only)' CONFIG_HPFS_FS n
-bool 'System V and Coherent filesystem support' CONFIG_SYSV_FS y
+bool 'System V and Coherent filesystem support' CONFIG_SYSV_FS n
 
 
 comment 'character devices'
 
-bool 'Cyclades async mux support' CONFIG_CYCLADES n
-bool 'Parallel printer support' CONFIG_PRINTER n
-bool 'Logitech busmouse support' CONFIG_BUSMOUSE n
-bool 'PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE n
-if [ "$CONFIG_PSMOUSE" = "y" ]; then
-bool 'C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE y
-fi
-bool 'Microsoft busmouse support' CONFIG_MS_BUSMOUSE n
-bool 'ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE n
-
-
-bool 'QIC-02 tape support' CONFIG_QIC02_TAPE n
-if [ "$CONFIG_QIC02_TAPE" = "y" ]; then
-bool 'Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF y
-if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
-
-comment '>>> Edit configuration parameters in ./include/linux/tpqic02.h!'
-
-else
-
-comment '>>> Setting runtime QIC-02 configuration is done with qic02conf'
-comment '>>> Which is available from ftp://ftp.funet.fi/pub/OS/Linux/BETA/QIC-02/'
-
-fi
-fi
-
-bool 'QIC-117 tape support' CONFIG_FTAPE n
-if [ "$CONFIG_FTAPE" = "y" ]; then
-int ' number of ftape buffers' NR_FTAPE_BUFFERS 3
-fi
+bool 'Zilog serial support' CONFIG_SUN_ZS n
 
 comment 'Sound'
 
-bool 'Sound card support' CONFIG_SOUND n
+bool 'Sun Audio support' CONFIG_SUN_AUDIO n
 
 comment 'Kernel hacking'
 
-#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC n
+bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC n
 bool 'Kernel profiling support' CONFIG_PROFILE n
 if [ "$CONFIG_PROFILE" = "y" ]; then
   int ' Profile shift count' CONFIG_PROFILE_SHIFT 2