patch-1.3.48 linux/arch/mips/config.in

• Lines: 330
• Date: Wed Dec 13 12:39:43 1995
• Orig file: v1.3.47/linux/arch/mips/config.in
• Orig date: Tue Aug 8 12:31:33 1995

diff -u --recursive --new-file v1.3.47/linux/arch/mips/config.in linux/arch/mips/config.in
@@ -2,255 +2,107 @@
 # For a description of the syntax of this configuration file,
 # see the Configure script.
 #
-
+mainmenu_name "Linux Kernel Configuration"
+  
+mainmenu_option next_comment
 comment 'Machine setup'
 
-bool 'Support for Deskstation Tyne' CONFIG_DESKSTATION_TYNE y
-bool 'Support for Acer PICA 1 chipset' CONFIG_ACER_PICA_61 y
-bool 'Support for DECstation' CONFIG_DECSTATION n
-
-bool 'Generate code for R4x00' CONFIG_R4X00 y
-
-comment 'General setup'
-
-bool 'Normal floppy disk support' CONFIG_BLK_DEV_FD y
-bool 'Normal (MFM/RLL) disk and IDE disk/cdrom support' CONFIG_ST506 y
-if [ "$CONFIG_ST506" = "y" ]; then
-  comment 'Please see block/drivers/README.ide for help/info on IDE drives'
-  bool '   Use old (reliable) disk-only driver for primary i/f' CONFIG_BLK_DEV_HD y
-  if [ "$CONFIG_BLK_DEV_HD" = "y" ]; then
-    bool '   Include new IDE driver for secondary i/f support' CONFIG_BLK_DEV_IDE n
-  else
-    bool '   Use new IDE driver for primary/secondary i/f' CONFIG_BLK_DEV_IDE n
-  fi
-  if [ "$CONFIG_BLK_DEV_IDE" = "y" ]; then
-    bool '   Include support for IDE CDROM (ATAPI)' CONFIG_BLK_DEV_IDECD n
-  fi
-fi
+bool 'Support for Acer PICA 1 chipset' CONFIG_ACER_PICA_61
+bool 'Support for DECstation' CONFIG_DECSTATION
+bool 'Support for Deskstation RPC44' CONFIG_DESKSTATION_RPC44
+bool 'Support for Deskstation Tyne' CONFIG_DESKSTATION_TYNE
+bool 'Support for Mips Magnum 3000' CONFIG_MIPS_MAGNUM_3000
+bool 'Support for Mips Magnum 4000' CONFIG_MIPS_MAGNUM_4000
+bool 'Support for Olivetty M700' CONFIG_OLIVETTI_M700
+if [ "$CONFIG_ACER_PICA_61" = "y" -o \
+     "$CONFIG_MIPS_MAGNUM_4000" = "y" -o \
+     "$CONFIG_OLIVETTI_M700" = "y" ]; then
+	define_bool CONFIG_MIPS_JAZZ y
+fi
+
+choice 'CPU type' \
+	"R3000 CONFIG_CPU_R3000	\
+	 R6000 CONFIG_CPU_R6000	\
+	 R4x00 CONFIG_CPU_R4X00	\
+	 R4600 CONFIG_CPU_R4600	\
+	 R8000 CONFIG_CPU_R8000	\
+	 R10000 CONFIG_CPU_R10000" R4x00
+if [ "$CONFIG_CPU_R3000" = "y" -o \
+     "$CONFIG_CPU_R6000" = "y" -o \
+     "$CONFIG_CPU_R4X00" = "y" -o \
+     "$CONFIG_CPU_R4600" = "y" -o \
+     "$CONFIG_CPU_R8000" = "y" ]; then
+	define_bool CONFIG_TLB_SHUTDOWN y
+fi
+
+define_bool CONFIG_BINFMT_ELF y
+bool 'Compile the kernel into the ELF object format' CONFIG_ELF_KERNEL
+if [ "$CONFIG_ELF_KERNEL" = "y" ]; then
+  bool 'Is your ELF compiler an extra compiler' CONFIG_EXTRA_ELF_COMPILER
+fi
+bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN
+bool 'Networking support' CONFIG_NET
+#bool 'PCI bios support' CONFIG_PCI
+#if [ "$CONFIG_PCI" = "y" ]; then
+#  bool '   PCI bridge optimisation (experimental)' CONFIG_PCI_OPTIMIZE
+#fi
+bool 'System V IPC' CONFIG_SYSVIPC
+
+mainmenu_option next_comment
+comment 'Loadable module support'
+bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
 
-bool 'XT harddisk support' CONFIG_BLK_DEV_XD n
-bool 'Networking support' CONFIG_NET y
-bool 'System V IPC' CONFIG_SYSVIPC n
-bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF n
+source drivers/block/Config.in
 
 if [ "$CONFIG_NET" = "y" ]; then
-comment 'Networking options'
-bool 'TCP/IP networking' CONFIG_INET y
-if [ "$CONFIG_INET" "=" "y" ]; then
-bool 'IP forwarding/gatewaying' CONFIG_IP_FORWARD y
-bool 'IP multicasting (ALPHA)' CONFIG_IP_MULTICAST n
-bool 'IP firewalling' CONFIG_IP_FIREWALL n
-bool 'IP accounting' CONFIG_IP_ACCT n
-comment '(it is safe to leave these untouched)'
-bool 'PC/TCP compatibility mode' CONFIG_INET_PCTCP n
-bool 'Reverse ARP' CONFIG_INET_RARP n
-bool 'Assume subnets are local' CONFIG_INET_SNARL y
-bool 'Disable NAGLE algorithm (normally enabled)' CONFIG_TCP_NAGLE_OFF n
-fi
-bool 'The IPX protocol' CONFIG_IPX n
-#bool 'Amateur Radio AX.25 Level 2' CONFIG_AX25 n
+  source net/Config.in
 fi
 
+mainmenu_option next_comment
 comment 'SCSI support'
 
-bool 'SCSI support?' CONFIG_SCSI n
+tristate 'SCSI support' CONFIG_SCSI
 
-if [ "$CONFIG_SCSI" = "n" ]; then
-
-comment 'Skipping SCSI configuration options...'
-
-else
-
-comment 'SCSI support type (disk, tape, CDrom)'
-
-bool 'SCSI disk support' CONFIG_BLK_DEV_SD y
-bool 'SCSI tape support' CONFIG_CHR_DEV_ST y
-bool 'SCSI CDROM support' CONFIG_BLK_DEV_SR y
-bool 'SCSI generic support' CONFIG_CHR_DEV_SG y
-
-comment 'SCSI low-level drivers'
-
-bool 'Adaptec AHA152X support' CONFIG_SCSI_AHA152X n
-bool 'Adaptec AHA1542 support' CONFIG_SCSI_AHA1542 y
-bool 'Adaptec AHA1740 support' CONFIG_SCSI_AHA1740 n
-bool 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC n
-bool 'EATA-DMA (DPT, NEC, ATT, Olivetti) support' CONFIG_SCSI_EATA_DMA y
-bool 'EATA-PIO (old DPT PM2001, PM2012A) support' CONFIG_SCSI_EATA_PIO n
-bool 'UltraStor 14F/34F support' CONFIG_SCSI_U14_34F n
-bool 'Future Domain 16xx SCSI support' CONFIG_SCSI_FUTURE_DOMAIN n
-bool 'Generic NCR5380 SCSI support' CONFIG_SCSI_GENERIC_NCR5380 n
-if [ "$CONFIG_PCI" = "y" ]; then
-  bool 'NCR53c7,8xx SCSI support'  CONFIG_SCSI_NCR53C7xx n
-fi
-bool 'Always IN2000 SCSI support (test release)' CONFIG_SCSI_IN2000 n
-bool 'PAS16 SCSI support' CONFIG_SCSI_PAS16 n
-bool 'QLOGIC SCSI support' CONFIG_SCSI_QLOGIC n
-bool 'Seagate ST-02 and Future Domain TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE n
-bool 'Trantor T128/T128F/T228 SCSI support' CONFIG_SCSI_T128 n
-bool 'UltraStor SCSI support' CONFIG_SCSI_ULTRASTOR n
-bool '7000FASST SCSI support' CONFIG_SCSI_7000FASST n
-#bool 'EATA ISA/EISA (DPT PM2011/021/012/022/122/322) support' CONFIG_SCSI_EATA n
-#bool 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG n
+if [ "$CONFIG_SCSI" != "n" ]; then
+  source drivers/scsi/Config.in
 fi
 
-
 if [ "$CONFIG_NET" = "y" ]; then
+  mainmenu_option next_comment
+  comment 'Network device support'
 
-comment 'Network device support'
-
-bool 'Network device support?' CONFIG_NETDEVICES n
-if [ "$CONFIG_NETDEVICES" = "n" ]; then
-
-comment 'Skipping network driver configuration options...'
-
-else
-bool 'Dummy net driver support' CONFIG_DUMMY n
-bool 'SLIP (serial line) support' CONFIG_SLIP n
-if [ "$CONFIG_SLIP" = "y" ]; then
-  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED y
-#  bool ' SLIP debugging on' SL_DUMP y
-fi
-bool 'PPP (point-to-point) support' CONFIG_PPP n
-bool 'PLIP (parallel port) support' CONFIG_PLIP n
-bool 'Load balancing support (experimental)' CONFIG_SLAVE_BALANCING n
-bool 'Do you want to be offered ALPHA test drivers' CONFIG_NET_ALPHA n
-bool 'Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC y
-if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then
-	bool 'WD80*3 support' CONFIG_WD80x3 y
-	bool 'SMC Ultra support' CONFIG_ULTRA n
-fi
-bool 'AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE n
-bool '3COM cards' CONFIG_NET_VENDOR_3COM y
-if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then
-	bool '3c501 support' CONFIG_EL1 n
-	bool '3c503 support' CONFIG_EL2 n
-	if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-		bool '3c505 support' CONFIG_ELPLUS n
-		bool '3c507 support' CONFIG_EL16 n
-	fi
-	bool '3c509/3c579 support' CONFIG_EL3 n
-fi
-bool 'Other ISA cards' CONFIG_NET_ISA n
-if [ "$CONFIG_NET_ISA" = "y" ]; then
-	bool 'Cabletron E21xx support' CONFIG_E2100 n
-	bool 'DEPCA support' CONFIG_DEPCA n
-	bool 'EtherWorks 3 support' CONFIG_EWRK3 n
-	if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-		bool 'Arcnet support' CONFIG_ARCNET n
-		bool 'AT1700 support' CONFIG_AT1700 n
-#		bool 'EtherExpressPro support' CONFIG_EEXPRESS_PRO n
-		bool 'EtherExpress support' CONFIG_EEXPRESS n
- 		bool 'NI5210 support' CONFIG_NI52 n
-		bool 'NI6510 support' CONFIG_NI65 n
-	fi
-	bool 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS n
-	bool 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN n
-	bool 'NE2000/NE1000 support' CONFIG_NE2000 y
-	bool 'SK_G16 support' CONFIG_SK_G16 n
-fi
-bool 'EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA n
-if [ "$CONFIG_NET_EISA" = "y" ]; then
-	if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-		bool 'Ansel Communications EISA 3200 support' CONFIG_AC3200 n
-	fi
-	bool 'Apricot Xen-II on board ethernet' CONFIG_APRICOT n
-#	bool 'DEC 21040 PCI support' CONFIG_DEC_ELCP n
-#	bool 'LPL T100V 100Mbs support' CONFIG_LPL_T100 n
-#	bool 'PCnet32 (32 bit VLB and PCI LANCE) support' CONFIG_PCNET32 n
-	bool 'Zenith Z-Note support' CONFIG_ZNET y
-fi
-bool 'Pocket and portable adaptors' CONFIG_NET_POCKET n
-if [ "$CONFIG_NET_POCKET" = "y" ]; then
-	bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP n
-	bool 'D-Link DE600 pocket adaptor support' CONFIG_DE600 n
-	bool 'D-Link DE620 pocket adaptor support' CONFIG_DE620 n
-#	bool 'Silicom pocket adaptor support' CONFIG_SILICOM_PEA n
-#	bool 'WaveLAN PCMCIA support' CONFIG_WaveLAN n
-#	bool '3 Com 3c589 PCMCIA support' CONFIG_3C589 n
-fi
-fi
-fi
-
-comment 'CD-ROM drivers'
-
-bool 'Sony CDU31A/CDU33A CDROM driver support' CONFIG_CDU31A n
-bool 'Mitsumi CDROM driver support' CONFIG_MCD n
-bool 'Matsushita/Panasonic CDROM driver support' CONFIG_SBPCD n
-if [ "$CONFIG_SBPCD" = "y" ]; then
-  bool 'Matsushita/Panasonic second CDROM controller support' CONFIG_SBPCD2 n
-  if [ "$CONFIG_SBPCD2" = "y" ]; then
-    bool 'Matsushita/Panasonic third CDROM controller support' CONFIG_SBPCD3 n
-    if [ "$CONFIG_SBPCD3" = "y" ]; then
-      bool 'Matsushita/Panasonic fourth CDROM controller support' CONFIG_SBPCD4 n
-    fi
+  bool 'Network device support' CONFIG_NETDEVICES
+  if [ "$CONFIG_NETDEVICES" = "y" ]; then
+    source drivers/net/Config.in
   fi
 fi
 
-comment 'Filesystems'
+mainmenu_option next_comment
+comment 'CD-ROM drivers (not for SCSI or IDE/ATAPI drives)'
 
-bool 'Standard (minix) fs support' CONFIG_MINIX_FS y
-bool 'Extended fs support' CONFIG_EXT_FS n
-bool 'Second extended fs support' CONFIG_EXT2_FS n
-bool 'xiafs filesystem support' CONFIG_XIA_FS n
-bool 'msdos fs support' CONFIG_MSDOS_FS n
-if [ "$CONFIG_MSDOS_FS" = "y" ]; then
-bool 'umsdos: Unix like fs on top of std MSDOS FAT fs' CONFIG_UMSDOS_FS n
-fi
-bool '/proc filesystem support' CONFIG_PROC_FS n
-if [ "$CONFIG_INET" = "y" ]; then
-bool 'NFS filesystem support' CONFIG_NFS_FS y
-fi
-if [ "$CONFIG_BLK_DEV_SR" = "y" -o "$CONFIG_CDU31A" = "y" -o "$CONFIG_MCD" = "y" -o "$CONFIG_SBPCD" = "y" -o "$CONFIG_BLK_DEV_IDECD" = "y" ]; then
-	bool 'ISO9660 cdrom filesystem support' CONFIG_ISO9660_FS y
-else
-	bool 'ISO9660 cdrom filesystem support' CONFIG_ISO9660_FS n
-fi
-bool 'OS/2 HPFS filesystem support (read only)' CONFIG_HPFS_FS n
-bool 'System V and Coherent filesystem support' CONFIG_SYSV_FS n
-
-comment 'character devices'
-
-bool 'Cyclades async mux support' CONFIG_CYCLADES n
-bool 'Parallel printer support' CONFIG_PRINTER n
-bool 'Logitech busmouse support' CONFIG_BUSMOUSE n
-bool 'PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE n
-if [ "$CONFIG_PSMOUSE" = "y" ]; then
-bool 'C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE n
+bool 'Support non-SCSI/IDE/ATAPI drives' CONFIG_CD_NO_IDESCSI
+if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
+  source drivers/cdrom/Config.in
 fi
-bool 'Microsoft busmouse support' CONFIG_MS_BUSMOUSE n
-bool 'ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE n
-  
-bool 'QIC-02 tape support' CONFIG_QIC02_TAPE n
-if [ "$CONFIG_QIC02_TAPE" = "y" ]; then
-bool 'Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF n
-if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
 
-comment '>>> Edit configuration parameters in ./include/linux/tpqic02.h!'
+source fs/Config.in
 
-else
-
-comment '>>> Setting runtime QIC-02 configuration is done with qic02conf'
-comment '>>> Which is available from ftp://ftp.funet.fi/pub/OS/Linux/BETA/QIC-02/'
-
-fi
-fi
-
-bool 'QIC-117 tape support' CONFIG_FTAPE n
-if [ "$CONFIG_FTAPE" = "y" ]; then
-int ' number of ftape buffers' NR_FTAPE_BUFFERS 3
-fi
+source drivers/char/Config.in
+bool 'Standard serial device support' CONFIG_SERIAL n
 
+mainmenu_option next_comment
 comment 'Sound'
 
-bool 'Sound card support' CONFIG_SOUND n
+tristate 'Sound card support' CONFIG_SOUND
+if [ "$CONFIG_SOUND" != "n" ]; then
+  source drivers/sound/Config.in
+fi
 
+mainmenu_option next_comment
 comment 'Kernel hacking'
 
-#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC n
-bool 'Kernel profiling support' CONFIG_PROFILE n
+#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
+bool 'Kernel profiling support' CONFIG_PROFILE
 if [ "$CONFIG_PROFILE" = "y" ]; then
   int ' Profile shift count' CONFIG_PROFILE_SHIFT 2
-fi
-if [ "$CONFIG_SCSI" = "y" ]; then
-bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS y
 fi