patch-1.3.7 linux/include/linux/smbno.h

• Lines: 270
• Date: Sat Jul 1 19:00:19 1995
• Orig file: v1.3.6/linux/include/linux/smbno.h
• Orig date: Thu Jan 1 02:00:00 1970

diff -u --recursive --new-file v1.3.6/linux/include/linux/smbno.h linux/include/linux/smbno.h
@@ -0,0 +1,269 @@
+#ifndef _SMBNO_H_
+#define _SMBNO_H_
+
+/* these define the attribute byte as seen by DOS */
+#define aRONLY (1L<<0)
+#define aHIDDEN (1L<<1)
+#define aSYSTEM (1L<<2)
+#define aVOLID (1L<<3)
+#define aDIR (1L<<4)
+#define aARCH (1L<<5)
+
+/* error classes */
+#define SUCCESS 0  /* The request was successful. */
+#define ERRDOS 0x01 /*  Error is from the core DOS operating system set. */
+#define ERRSRV 0x02 /* Error is generated by the server network file manager.*/
+#define ERRHRD 0x03  /* Error is an hardware error. */
+#define ERRCMD 0xFF  /* Command was not in the "SMB" format. */
+
+/* SMB X/Open error codes for the ERRdos error class */
+
+#define ERRbadfunc 1            /* Invalid function (or system call) */
+#define ERRbadfile 2            /* File not found (pathname error) */
+#define ERRbadpath 3            /* Directory not found */
+#define ERRnofids 4             /* Too many open files */
+#define ERRnoaccess 5           /* Access denied */
+#define ERRbadfid 6             /* Invalid fid */
+#define ERRbadmcb 7             /* Memory control blocks destroyed */
+#define ERRnomem 8              /* Out of memory */
+#define ERRbadmem 9             /* Invalid memory block address */
+#define ERRbadenv 10            /* Invalid environment */
+#define ERRbadformat 11         /* Invalid format */
+#define ERRbadaccess 12         /* Invalid open mode */
+#define ERRbaddata 13           /* Invalid data (only from ioctl call) */
+#define ERRres 14               /* reserved */
+#define ERRbaddrive 15          /* Invalid drive */
+#define ERRremcd 16             /* Attempt to delete current directory */
+#define ERRdiffdevice 17        /* rename/move across different filesystems */
+#define ERRnofiles 18           /* no more files found in file search */
+#define ERRbadshare 32          /* Share mode on file conflict with open mode */
+#define ERRlock 33              /* Lock request conflicts with existing lock */
+#define ERRfilexists 80         /* File in operation already exists */
+#define ERRbadpipe 230          /* Named pipe invalid */
+#define ERRpipebusy 231         /* All instances of pipe are busy */
+#define ERRpipeclosing 232      /* named pipe close in progress */
+#define ERRnotconnected 233     /* No process on other end of named pipe */
+#define ERRmoredata 234         /* More data to be returned */
+#define ERROR_EAS_DIDNT_FIT 275 /* Extended attributes didn't fit */
+#define ERROR_EAS_NOT_SUPPORTED 282 /* Extended attributes not suppored */
+
+/* Error codes for the ERRSRV class */
+
+#define ERRerror 1              /* Non specific error code */
+#define ERRbadpw 2              /* Bad password */
+#define ERRbadtype 3            /* reserved */
+#define ERRaccess 4          /* No permissions to do the requested operation */
+#define ERRinvnid 5             /* tid invalid */
+#define ERRinvnetname 6         /* Invalid servername */
+#define ERRinvdevice 7          /* Invalid device */
+#define ERRqfull 49             /* Print queue full */
+#define ERRqtoobig 50           /* Queued item too big */
+#define ERRinvpfid 52           /* Invalid print file in smb_fid */
+#define ERRsmbcmd 64            /* Unrecognised command */
+#define ERRsrverror 65          /* smb server internal error */
+#define ERRfilespecs 67         /* fid and pathname invalid combination */
+#define ERRbadlink 68           /* reserved */
+#define ERRbadpermits 69        /* Access specified for a file is not valid */
+#define ERRbadpid 70            /* reserved */
+#define ERRsetattrmode 71       /* attribute mode invalid */
+#define ERRpaused 81            /* Message server paused */
+#define ERRmsgoff 82            /* Not receiving messages */
+#define ERRnoroom 83            /* No room for message */
+#define ERRrmuns 87             /* too many remote usernames */
+#define ERRtimeout 88           /* operation timed out */
+#define ERRnoresource  89   /* No resources currently available for request. */
+#define ERRtoomanyuids 90       /* too many userids */
+#define ERRbaduid 91            /* bad userid */
+#define ERRuseMPX 250    /* temporarily unable to use raw mode, use MPX mode */
+#define ERRuseSTD 251    /* temporarily unable to use raw mode, use std.mode */
+#define ERRcontMPX 252          /* resume MPX mode */
+#define ERRbadPW                /* reserved */
+#define ERRnosupport 0xFFFF
+
+/* Error codes for the ERRHRD class */
+
+#define ERRnowrite 19           /* read only media */
+#define ERRbadunit 20           /* Unknown device */
+#define ERRnotready 21          /* Drive not ready */
+#define ERRbadcmd 22            /* Unknown command */
+#define ERRdata 23              /* Data (CRC) error */
+#define ERRbadreq 24            /* Bad request structure length */
+#define ERRseek 25
+#define ERRbadmedia 26
+#define ERRbadsector 27
+#define ERRnopaper 28
+#define ERRwrite 29             /* write fault */
+#define ERRread 30              /* read fault */
+#define ERRgeneral 31           /* General hardware failure */
+#define ERRwrongdisk 34
+#define ERRFCBunavail 35
+#define ERRsharebufexc 36       /* share buffer exceeded */
+#define ERRdiskfull 39
+
+/* offsets into message for common items */
+#define smb_com 8
+#define smb_rcls 9
+#define smb_reh 10
+#define smb_err 11
+#define smb_flg 13
+#define smb_flg2 14
+#define smb_reb 13
+#define smb_tid 28
+#define smb_pid 30
+#define smb_uid 32
+#define smb_mid 34
+#define smb_wct 36
+#define smb_vwv 37
+#define smb_vwv0 37
+#define smb_vwv1 39
+#define smb_vwv2 41
+#define smb_vwv3 43
+#define smb_vwv4 45
+#define smb_vwv5 47
+#define smb_vwv6 49
+#define smb_vwv7 51
+#define smb_vwv8 53
+#define smb_vwv9 55
+#define smb_vwv10 57
+#define smb_vwv11 59
+#define smb_vwv12 61
+#define smb_vwv13 63
+#define smb_vwv14 65
+
+/* these are the trans2 sub fields for primary requests */
+#define smb_tpscnt smb_vwv0
+#define smb_tdscnt smb_vwv1
+#define smb_mprcnt smb_vwv2
+#define smb_mdrcnt smb_vwv3
+#define smb_msrcnt smb_vwv4
+#define smb_flags smb_vwv5
+#define smb_timeout smb_vwv6
+#define smb_pscnt smb_vwv9
+#define smb_psoff smb_vwv10
+#define smb_dscnt smb_vwv11
+#define smb_dsoff smb_vwv12
+#define smb_suwcnt smb_vwv13
+#define smb_setup smb_vwv14
+#define smb_setup0 smb_setup
+#define smb_setup1 (smb_setup+2)
+#define smb_setup2 (smb_setup+4)
+
+/* these are for the secondary requests */
+#define smb_spscnt smb_vwv2
+#define smb_spsoff smb_vwv3
+#define smb_spsdisp smb_vwv4
+#define smb_sdscnt smb_vwv5
+#define smb_sdsoff smb_vwv6
+#define smb_sdsdisp smb_vwv7
+#define smb_sfid smb_vwv8
+
+/* and these for responses */
+#define smb_tprcnt smb_vwv0
+#define smb_tdrcnt smb_vwv1
+#define smb_prcnt smb_vwv3
+#define smb_proff smb_vwv4
+#define smb_prdisp smb_vwv5
+#define smb_drcnt smb_vwv6
+#define smb_droff smb_vwv7
+#define smb_drdisp smb_vwv8
+
+/* the complete */
+#define SMBmkdir      0x00   /* create directory */
+#define SMBrmdir      0x01   /* delete directory */
+#define SMBopen       0x02   /* open file */
+#define SMBcreate     0x03   /* create file */
+#define SMBclose      0x04   /* close file */
+#define SMBflush      0x05   /* flush file */
+#define SMBunlink     0x06   /* delete file */
+#define SMBmv         0x07   /* rename file */
+#define SMBgetatr     0x08   /* get file attributes */
+#define SMBsetatr     0x09   /* set file attributes */
+#define SMBread       0x0A   /* read from file */
+#define SMBwrite      0x0B   /* write to file */
+#define SMBlock       0x0C   /* lock byte range */
+#define SMBunlock     0x0D   /* unlock byte range */
+#define SMBctemp      0x0E   /* create temporary file */
+#define SMBmknew      0x0F   /* make new file */
+#define SMBchkpth     0x10   /* check directory path */
+#define SMBexit       0x11   /* process exit */
+#define SMBlseek      0x12   /* seek */
+#define SMBtcon       0x70   /* tree connect */
+#define SMBtconX      0x75   /* tree connect and X*/
+#define SMBtdis       0x71   /* tree disconnect */
+#define SMBnegprot    0x72   /* negotiate protocol */
+#define SMBdskattr    0x80   /* get disk attributes */
+#define SMBsearch     0x81   /* search directory */
+#define SMBsplopen    0xC0   /* open print spool file */
+#define SMBsplwr      0xC1   /* write to print spool file */
+#define SMBsplclose   0xC2   /* close print spool file */
+#define SMBsplretq    0xC3   /* return print queue */
+#define SMBsends      0xD0   /* send single block message */
+#define SMBsendb      0xD1   /* send broadcast message */
+#define SMBfwdname    0xD2   /* forward user name */
+#define SMBcancelf    0xD3   /* cancel forward */
+#define SMBgetmac     0xD4   /* get machine name */
+#define SMBsendstrt   0xD5   /* send start of multi-block message */
+#define SMBsendend    0xD6   /* send end of multi-block message */
+#define SMBsendtxt    0xD7   /* send text of multi-block message */
+
+/* Core+ protocol */
+#define SMBlockread	  0x13   /* Lock a range and read */
+#define SMBwriteunlock 0x14 /* Unlock a range then write */
+#define SMBreadbraw   0x1a  /* read a block of data with no smb header */
+#define SMBwritebraw  0x1d  /* write a block of data with no smb header */
+#define SMBwritec     0x20  /* secondary write request */
+#define SMBwriteclose 0x2c  /* write a file then close it */
+
+/* dos extended protocol */
+#define SMBreadBraw      0x1A   /* read block raw */
+#define SMBreadBmpx      0x1B   /* read block multiplexed */
+#define SMBreadBs        0x1C   /* read block (secondary response) */
+#define SMBwriteBraw     0x1D   /* write block raw */
+#define SMBwriteBmpx     0x1E   /* write block multiplexed */
+#define SMBwriteBs       0x1F   /* write block (secondary request) */
+#define SMBwriteC        0x20   /* write complete response */
+#define SMBsetattrE      0x22   /* set file attributes expanded */
+#define SMBgetattrE      0x23   /* get file attributes expanded */
+#define SMBlockingX      0x24   /* lock/unlock byte ranges and X */
+#define SMBtrans         0x25   /* transaction - name, bytes in/out */
+#define SMBtranss        0x26   /* transaction (secondary request/response) */
+#define SMBioctl         0x27   /* IOCTL */
+#define SMBioctls        0x28   /* IOCTL  (secondary request/response) */
+#define SMBcopy          0x29   /* copy */
+#define SMBmove          0x2A   /* move */
+#define SMBecho          0x2B   /* echo */
+#define SMBopenX         0x2D   /* open and X */
+#define SMBreadX         0x2E   /* read and X */
+#define SMBwriteX        0x2F   /* write and X */
+#define SMBsesssetupX    0x73   /* Session Set Up & X (including User Logon) */
+#define SMBtconX         0x75   /* tree connect and X */
+#define SMBffirst        0x82   /* find first */
+#define SMBfunique       0x83   /* find unique */
+#define SMBfclose        0x84   /* find close */
+#define SMBinvalid       0xFE   /* invalid command */
+
+
+/* Extended 2.0 protocol */
+#define SMBtrans2        0x32   /* TRANS2 protocol set */
+#define SMBtranss2       0x33   /* TRANS2 protocol set, secondary command */
+#define SMBfindclose     0x34   /* Terminate a TRANSACT2_FINDFIRST */
+#define SMBfindnclose    0x35   /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
+#define SMBulogoffX      0x74   /* user logoff */
+
+/* these are the TRANS2 sub commands */
+#define TRANSACT2_OPEN          0
+#define TRANSACT2_FINDFIRST     1
+#define TRANSACT2_FINDNEXT      2
+#define TRANSACT2_QFSINFO       3
+#define TRANSACT2_SETFSINFO     4
+#define TRANSACT2_QPATHINFO     5
+#define TRANSACT2_SETPATHINFO   6
+#define TRANSACT2_QFILEINFO     7
+#define TRANSACT2_SETFILEINFO   8
+#define TRANSACT2_FSCTL         9
+#define TRANSACT2_IOCTL           10
+#define TRANSACT2_FINDNOTIFYFIRST 11
+#define TRANSACT2_FINDNOTIFYNEXT  12
+#define TRANSACT2_MKDIR           13
+
+#endif /* _SMBNO_H_ */