patch-2.1.109 linux/Documentation/sound/CS4232

• Lines: 47
• Date: Fri Jul 10 14:03:35 1998
• Orig file: v2.1.108/linux/Documentation/sound/CS4232
• Orig date: Thu Mar 26 15:57:02 1998

diff -u --recursive --new-file v2.1.108/linux/Documentation/sound/CS4232 linux/Documentation/sound/CS4232
@@ -1,23 +1,23 @@
-
-insmod sound
-insmod ad1848
-insmod uart401
-insmod cs4232 io=* irq=* dma=* dma2=*
-
-This configures the crystal CS423x sound chip and activates its DSP
-functions. On some cards the non PnP setup the board attempts to do fails.
-If you have problems use the kernel PnP facilities.
-
-io is the I/O address of the WSS (normally 0x534)
-irq is the IRQ of this device
-dma/dma2 are the DMA channels. DMA2 may well be 0
-
-
-To get midi synth facilities add
-
-insmod opl3 io=*
-
-io= I/O address of the OPL3 synthesizer. This will be shown in /proc/sys/pnp
-and is normally 0x388
-
-
+To configure the Crystal CS423x sound chip and activate its DSP functions,
+modules may be loaded in this order:
+  
+	modprobe sound
+	insmod ad1848
+	insmod uart401
+	insmod cs4232 io=* irq=* dma=* dma2=*
+  
+This is the meaning of the parameters:
+  
+	io--I/O address of the Windows Sound System (normally 0x534)
+	irq--IRQ of this device
+	dma and dma2--DMA channels (DMA2 may be 0)
+  
+On some cards, the board attempts to do non-PnP setup, and fails.  If you
+have problems, use Linux' PnP facilities. 
+  
+To get MIDI facilities add
+  
+	insmod opl3 io=*
+  
+where "io" is the I/O address of the OPL3 synthesizer. This will be shown
+in /proc/sys/pnp and is normally 0x388.