patch-2.1.37 linux/drivers/net/de4x5.h
Next file: linux/drivers/net/depca.c
Previous file: linux/drivers/net/de4x5.c
Back to the patch index
Back to the overall index
- Lines: 395
- Date:
Mon May 12 10:35:41 1997
- Orig file:
v2.1.36/linux/drivers/net/de4x5.h
- Orig date:
Sun Feb 2 05:02:05 1997
diff -u --recursive --new-file v2.1.36/linux/drivers/net/de4x5.h linux/drivers/net/de4x5.h
@@ -139,7 +139,7 @@
#define CFCS_DST 0x06000000 /* DEVSEL Timing (S) */
#define CFCS_DPR 0x01000000 /* Data Parity Report (S) */
#define CFCS_FBB 0x00800000 /* Fast Back-To-Back (S) */
-#define CFCS_SLE 0x00000100 /* System Error Enable (C) */
+#define CFCS_SEE 0x00000100 /* System Error Enable (C) */
#define CFCS_PER 0x00000040 /* Parity Error Response (C) */
#define CFCS_MO 0x00000004 /* Master Operation (C) */
#define CFCS_MSA 0x00000002 /* Memory Space Access (C) */
@@ -150,8 +150,8 @@
*/
#define CFRV_BC 0xff000000 /* Base Class */
#define CFRV_SC 0x00ff0000 /* Subclass */
-#define CFRV_SN 0x000000f0 /* Step Number */
-#define CFRV_RN 0x0000000f /* Revision Number */
+#define CFRV_RN 0x000000f0 /* Revision Number */
+#define CFRV_SN 0x0000000f /* Step Number */
#define BASE_CLASS 0x02000000 /* Indicates Network Controller */
#define SUB_CLASS 0x00000000 /* Indicates Ethernet Controller */
#define STEP_NUMBER 0x00000020 /* Increments for future chips */
@@ -170,12 +170,33 @@
#define CBIO_IOSI 0x00000001 /* I/O Space Indicator (RO, value is 1) */
/*
+** PCI Configuration Card Information Structure Register (PCI_CCIS)
+*/
+#define CCIS_ROMI 0xf0000000 /* ROM Image */
+#define CCIS_ASO 0x0ffffff8 /* Address Space Offset */
+#define CCIS_ASI 0x00000007 /* Address Space Indicator */
+
+/*
+** PCI Configuration Subsystem ID Register (PCI_SSID)
+*/
+#define SSID_SSID 0xffff0000 /* Subsystem ID */
+#define SSID_SVID 0x0000ffff /* Subsystem Vendor ID */
+
+/*
** PCI Configuration Expansion ROM Base Address Register (PCI_CBER)
*/
#define CBER_MASK 0xfffffc00 /* Expansion ROM Base Address Mask */
#define CBER_ROME 0x00000001 /* ROM Enable */
/*
+** PCI Configuration Interrupt Register (PCI_CFIT)
+*/
+#define CFIT_MXLT 0xff000000 /* MAX_LAT Value (0.25us periods) */
+#define CFIT_MNGT 0x00ff0000 /* MIN_GNT Value (0.25us periods) */
+#define CFIT_IRQP 0x0000ff00 /* Interrupt Pin */
+#define CFIT_IRQL 0x000000ff /* Interrupt Line */
+
+/*
** PCI Configuration Power Management Area Register (PCI_CFPM)
*/
#define SLEEP 0x80 /* Power Saving Sleep Mode */
@@ -188,6 +209,7 @@
/*
** DC21040 Bus Mode Register (DE4X5_BMR)
*/
+#define BMR_RML 0x00200000 /* [Memory] Read Multiple */
#define BMR_DBO 0x00100000 /* Descriptor Byte Ordering (Endian) */
#define BMR_TAP 0x000e0000 /* Transmit Automatic Polling */
#define BMR_DAS 0x00010000 /* Diagnostic Address Space */
@@ -198,6 +220,7 @@
#define BMR_BAR 0x00000002 /* Bus ARbitration */
#define BMR_SWR 0x00000001 /* Software Reset */
+ /* Timings here are for 10BASE-T/AUI only*/
#define TAP_NOPOLL 0x00000000 /* No automatic polling */
#define TAP_200US 0x00020000 /* TX automatic polling every 200us */
#define TAP_800US 0x00040000 /* TX automatic polling every 800us */
@@ -249,18 +272,21 @@
#define TRBA 0xfffffffc /* TX Descriptor List Start Address */
/*
-** DC21040 Status Register (DE4X5_STS)
+** Status Register (DE4X5_STS)
*/
+#define STS_GPI 0x04000000 /* General Purpose Port Interrupt */
#define STS_BE 0x03800000 /* Bus Error Bits */
#define STS_TS 0x00700000 /* Transmit Process State */
#define STS_RS 0x000e0000 /* Receive Process State */
#define STS_NIS 0x00010000 /* Normal Interrupt Summary */
#define STS_AIS 0x00008000 /* Abnormal Interrupt Summary */
#define STS_ER 0x00004000 /* Early Receive */
+#define STS_FBE 0x00002000 /* Fatal Bus Error */
#define STS_SE 0x00002000 /* System Error */
#define STS_LNF 0x00001000 /* Link Fail */
#define STS_FD 0x00000800 /* Full-Duplex Short Frame Received */
#define STS_TM 0x00000800 /* Timer Expired (DC21041) */
+#define STS_ETI 0x00000400 /* Early Transmit Interupt */
#define STS_AT 0x00000400 /* AUI/TP Pin */
#define STS_RWT 0x00000200 /* Receive Watchdog Time-Out */
#define STS_RPS 0x00000100 /* Receive Process Stopped */
@@ -268,6 +294,7 @@
#define STS_RI 0x00000040 /* Receive Interrupt */
#define STS_UNF 0x00000020 /* Transmit Underflow */
#define STS_LNP 0x00000010 /* Link Pass */
+#define STS_ANC 0x00000010 /* Autonegotiation Complete */
#define STS_TJT 0x00000008 /* Transmit Jabber Time-Out */
#define STS_TU 0x00000004 /* Transmit Buffer Unavailable */
#define STS_TPS 0x00000002 /* Transmit Process Stopped */
@@ -300,8 +327,10 @@
#define INT_CANCEL 0x0001ffff /* For zeroing all interrupt sources */
/*
-** DC21040 Operation Mode Register (DE4X5_OMR)
+** Operation Mode Register (DE4X5_OMR)
*/
+#define OMR_SC 0x80000000 /* Special Capture Effect Enable */
+#define OMR_RA 0x40000000 /* Receive All */
#define OMR_SDP 0x02000000 /* SD Polarity - MUST BE ASSERTED */
#define OMR_SCR 0x01000000 /* Scrambler Mode */
#define OMR_PCS 0x00800000 /* PCS Function */
@@ -326,27 +355,31 @@
#define OMR_SR 0x00000002 /* Start/Stop Receive */
#define OMR_HP 0x00000001 /* Hash/Perfect Receive Filtering Mode */
-#define TR_72 0x00000000 /* Threshold set to 72 bytes */
-#define TR_96 0x00004000 /* Threshold set to 96 bytes */
-#define TR_128 0x00008000 /* Threshold set to 128 bytes */
-#define TR_160 0x0000c000 /* Threshold set to 160 bytes */
+#define TR_72 0x00000000 /* Threshold set to 72 (128) bytes */
+#define TR_96 0x00004000 /* Threshold set to 96 (256) bytes */
+#define TR_128 0x00008000 /* Threshold set to 128 (512) bytes */
+#define TR_160 0x0000c000 /* Threshold set to 160 (1024) bytes */
/*
** DC21040 Interrupt Mask Register (DE4X5_IMR)
*/
+#define IMR_GPM 0x04000000 /* General Purpose Port Mask */
#define IMR_NIM 0x00010000 /* Normal Interrupt Summary Mask */
#define IMR_AIM 0x00008000 /* Abnormal Interrupt Summary Mask */
#define IMR_ERM 0x00004000 /* Early Receive Mask */
+#define IMR_FBM 0x00002000 /* Fatal Bus Error Mask */
#define IMR_SEM 0x00002000 /* System Error Mask */
#define IMR_LFM 0x00001000 /* Link Fail Mask */
#define IMR_FDM 0x00000800 /* Full-Duplex (Short Frame) Mask */
#define IMR_TMM 0x00000800 /* Timer Expired Mask (DC21041) */
+#define IMR_ETM 0x00000400 /* Early Transmit Interrupt Mask */
#define IMR_ATM 0x00000400 /* AUI/TP Switch Mask */
#define IMR_RWM 0x00000200 /* Receive Watchdog Time-Out Mask */
#define IMR_RSM 0x00000100 /* Receive Stopped Mask */
#define IMR_RUM 0x00000080 /* Receive Buffer Unavailable Mask */
#define IMR_RIM 0x00000040 /* Receive Interrupt Mask */
#define IMR_UNM 0x00000020 /* Underflow Interrupt Mask */
+#define IMR_ANM 0x00000010 /* Autonegotiation Complete Mask */
#define IMR_LPM 0x00000010 /* Link Pass */
#define IMR_TJM 0x00000008 /* Transmit Time-Out Jabber Mask */
#define IMR_TUM 0x00000004 /* Transmit Buffer Unavailable Mask */
@@ -354,13 +387,7 @@
#define IMR_TIM 0x00000001 /* Transmit Interrupt Mask */
/*
-** DC21040 Missed Frames Counter (DE4X5_MFC)
-*/
-#define MFC_OVFL 0x00010000 /* Missed Frames Counter Overflow Bit */
-#define MFC_CNTR 0x0000ffff /* Missed Frames Counter Bits */
-
-/*
-** DC21140 Missed Frames and FIFO Overflow Counters (DE4X5_MFC)
+** Missed Frames and FIFO Overflow Counters (DE4X5_MFC)
*/
#define MFC_FOCO 0x10000000 /* FIFO Overflow Counter Overflow Bit */
#define MFC_FOC 0x0ffe0000 /* FIFO Overflow Counter Bits */
@@ -461,7 +488,7 @@
** MII Management Auto Negotiation Advertisement Register
*/
#define MII_ANA_TAF 0x03e0 /* Technology Ability Field */
-#define MII_ANA_T4AM 0x0400 /* T4 Technology Ability Mask */
+#define MII_ANA_T4AM 0x0200 /* T4 Technology Ability Mask */
#define MII_ANA_TXAM 0x0180 /* TX Technology Ability Mask */
#define MII_ANA_FDAM 0x0140 /* Full Duplex Technology Ability Mask */
#define MII_ANA_HDAM 0x02a0 /* Half Duplex Technology Ability Mask */
@@ -476,7 +503,7 @@
#define MII_ANLPA_ACK 0x4000 /* Remote Acknowledge */
#define MII_ANLPA_RF 0x2000 /* Remote Fault */
#define MII_ANLPA_TAF 0x03e0 /* Technology Ability Field */
-#define MII_ANLPA_T4AM 0x0400 /* T4 Technology Ability Mask */
+#define MII_ANLPA_T4AM 0x0200 /* T4 Technology Ability Mask */
#define MII_ANLPA_TXAM 0x0180 /* TX Technology Ability Mask */
#define MII_ANLPA_FDAM 0x0140 /* Full Duplex Technology Ability Mask */
#define MII_ANLPA_HDAM 0x02a0 /* Half Duplex Technology Ability Mask */
@@ -547,6 +574,8 @@
#define SROM_100BASEFF 0x0008 /* 100BASE-FX full duplex */
#define BLOCK_LEN 0x7f /* Extended blocks length mask */
+#define EXT_FIELD 0x40 /* Extended blocks extension field bit */
+#define MEDIA_CODE 0x3f /* Extended blocks media code mask */
/*
** SROM Compact Format Block Masks
@@ -589,14 +618,18 @@
#define GEP_CTRL 0x00000100 /* GEP control bit */
/*
-** DC21040 SIA Status Register (DE4X5_SISR)
+** SIA Status Register (DE4X5_SISR)
*/
#define SISR_LPC 0xffff0000 /* Link Partner's Code Word */
#define SISR_LPN 0x00008000 /* Link Partner Negotiable */
#define SISR_ANS 0x00007000 /* Auto Negotiation Arbitration State */
-#define SISR_NSN 0x00000800 /* Non Stable NLPs Detected */
+#define SISR_NSN 0x00000800 /* Non Stable NLPs Detected (DC21041) */
+#define SISR_TRF 0x00000800 /* Transmit Remote Fault */
+#define SISR_NSND 0x00000400 /* Non Stable NLPs Detected (DC21142) */
#define SISR_ANR_FDS 0x00000400 /* Auto Negotiate Restart/Full Duplex Sel.*/
+#define SISR_TRA 0x00000200 /* 10BASE-T Receive Port Activity */
#define SISR_NRA 0x00000200 /* Non Selected Port Receive Activity */
+#define SISR_ARA 0x00000100 /* AUI Receive Port Activity */
#define SISR_SRA 0x00000100 /* Selected Port Receive Activity */
#define SISR_DAO 0x00000080 /* PLL All One */
#define SISR_DAZ 0x00000040 /* PLL All Zero */
@@ -606,7 +639,7 @@
#define SISR_LKF 0x00000004 /* Link Fail Status */
#define SISR_NCR 0x00000002 /* Network Connection Error */
#define SISR_PAUI 0x00000001 /* AUI_TP Indication */
-#define SIA_RESET 0x00000000 /* SIA Reset */
+#define SISR_MRA 0x00000001 /* MII Receive Port Activity */
#define ANS_NDIS 0x00000000 /* Nway disable */
#define ANS_TDIS 0x00001000 /* Transmit Disable */
@@ -617,7 +650,7 @@
#define ANS_LCHK 0x00006000 /* Link Check */
/*
-** DC21040 SIA Connectivity Register (DE4X5_SICR)
+** SIA Connectivity Register (DE4X5_SICR)
*/
#define SICR_SDM 0xffff0000 /* SIA Diagnostics Mode */
#define SICR_OE57 0x00008000 /* Output Enable 5 6 7 */
@@ -636,14 +669,14 @@
#define SICR_SIM 0x00000040 /* Serial Interface Input Multiplexer */
#define SICR_ENI 0x00000020 /* Encoder Input Multiplexer */
#define SICR_EDP 0x00000010 /* SIA PLL External Input Enable */
-#define SICR_AUI 0x00000008 /* 10Base-T or AUI */
+#define SICR_AUI 0x00000008 /* 10Base-T (0) or AUI (1) */
#define SICR_CAC 0x00000004 /* CSR Auto Configuration */
#define SICR_PS 0x00000002 /* Pin AUI/TP Selection */
#define SICR_SRL 0x00000001 /* SIA Reset */
-#define SICR_RESET 0xffff0000 /* Reset value for SICR */
+#define SIA_RESET 0x00000000 /* SIA Reset Value */
/*
-** DC21040 SIA Transmit and Receive Register (DE4X5_STRR)
+** SIA Transmit and Receive Register (DE4X5_STRR)
*/
#define STRR_TAS 0x00008000 /* 10Base-T/AUI Autosensing Enable */
#define STRR_SPP 0x00004000 /* Set Polarity Plus */
@@ -663,8 +696,20 @@
#define STRR_RESET 0xffffffff /* Reset value for STRR */
/*
-** DC21040 SIA General Register (DE4X5_SIGR)
+** SIA General Register (DE4X5_SIGR)
*/
+#define SIGR_RMI 0x40000000 /* Receive Match Interrupt */
+#define SIGR_GI1 0x20000000 /* General Port Interrupt 1 */
+#define SIGR_GI0 0x10000000 /* General Port Interrupt 0 */
+#define SIGR_CWE 0x08000000 /* Control Write Enable */
+#define SIGR_RME 0x04000000 /* Receive Match Enable */
+#define SIGR_GEI1 0x02000000 /* GEP Interrupt Enable on Port 1 */
+#define SIGR_GEI0 0x01000000 /* GEP Interrupt Enable on Port 0 */
+#define SIGR_LGS3 0x00800000 /* LED/GEP3 Select */
+#define SIGR_LGS2 0x00400000 /* LED/GEP2 Select */
+#define SIGR_LGS1 0x00200000 /* LED/GEP1 Select */
+#define SIGR_LGS0 0x00100000 /* LED/GEP0 Select */
+#define SIGR_MD 0x000f0000 /* General Purpose Mode and Data */
#define SIGR_LV2 0x00008000 /* General Purpose LED2 value */
#define SIGR_LE2 0x00004000 /* General Purpose LED2 enable */
#define SIGR_FRL 0x00002000 /* Force Receiver Low */
@@ -687,7 +732,8 @@
** Receive Descriptor Bit Summary
*/
#define R_OWN 0x80000000 /* Own Bit */
-#define RD_FL 0x7fff0000 /* Frame Length */
+#define RD_FF 0x40000000 /* Filtering Fail */
+#define RD_FL 0x3fff0000 /* Frame Length */
#define RD_ES 0x00008000 /* Error Summary */
#define RD_LE 0x00004000 /* Length Error */
#define RD_DT 0x00003000 /* Data Type */
@@ -699,6 +745,7 @@
#define RD_CS 0x00000040 /* Collision Seen */
#define RD_FT 0x00000020 /* Frame Type */
#define RD_RJ 0x00000010 /* Receive Watchdog */
+#define RD_RE 0x00000008 /* Report on MII Error */
#define RD_DB 0x00000004 /* Dribbling Bit */
#define RD_CE 0x00000002 /* CRC Error */
#define RD_OF 0x00000001 /* Overflow */
@@ -734,40 +781,39 @@
#define TD_TCH 0x01000000 /* Second Address Chained */
#define TD_DPD 0x00800000 /* Disabled Padding */
#define TD_FT0 0x00400000 /* Filtering Type */
-#define TD_RBS2 0x003ff800 /* Buffer 2 Size */
-#define TD_RBS1 0x000007ff /* Buffer 1 Size */
+#define TD_TBS2 0x003ff800 /* Buffer 2 Size */
+#define TD_TBS1 0x000007ff /* Buffer 1 Size */
#define PERFECT_F 0x00000000
#define HASH_F TD_FT0
#define INVERSE_F TD_FT1
-#define HASH_O_F TD_FT1| TD_F0
+#define HASH_O_F (TD_FT1 | TD_F0)
/*
** Media / mode state machine definitions
*/
-#define NC 0x0000 /* No Connection */
-#define TP 0x0001 /* 10Base-T */
-#define TP_NW 0x0002 /* 10Base-T with Nway */
-#define BNC 0x0004 /* Thinwire */
-#define AUI 0x0008 /* Thickwire */
+#define NC 0x0000 /* No Connection */
+#define TP 0x0001 /* 10Base-T */
+#define TP_NW 0x0002 /* 10Base-T with Nway */
+#define BNC 0x0004 /* Thinwire */
+#define AUI 0x0008 /* Thickwire */
#define BNC_AUI 0x0010 /* BNC/AUI on DC21040 indistinguishable */
-#define ANS 0x0020 /* Intermediate AutoNegotiation State */
-#define ANS_1 0x0021 /* Intermediate AutoNegotiation State */
-
-#define _10Mb 0x0040 /* 10Mb/s Ethernet */
-#define _100Mb 0x0080 /* 100Mb/s Ethernet */
-#define SPD_DET 0x0100 /* Parallel speed detection */
-#define INIT 0x0200 /* Initial state */
-#define EXT_SIA 0x0400 /* External SIA for motherboard chip */
-#define ANS_SUSPECT 0x0802 /* Suspect the ANS (TP) port is down */
-#define TP_SUSPECT 0x0803 /* Suspect the TP port is down */
-#define BNC_AUI_SUSPECT 0x0804 /* Suspect the BNC or AUI port is down */
-#define EXT_SIA_SUSPECT 0x0805 /* Suspect the EXT SIA port is down */
-#define BNC_SUSPECT 0x0806 /* Suspect the BNC port is down */
-#define AUI_SUSPECT 0x0807 /* Suspect the AUI port is down */
+#define ANS 0x0020 /* Intermediate AutoNegotiation State */
+#define _10Mb 0x0040 /* 10Mb/s Ethernet */
+#define _100Mb 0x0080 /* 100Mb/s Ethernet */
+#define SPD_DET 0x0100 /* Parallel speed detection */
+#define INIT 0x0200 /* Initial state */
+#define EXT_SIA 0x0400 /* External SIA for motherboard chip */
+#define ANS_SUSPECT 0x0802 /* Suspect the ANS (TP) port is down */
+#define TP_SUSPECT 0x0803 /* Suspect the TP port is down */
+#define BNC_AUI_SUSPECT 0x0804 /* Suspect the BNC or AUI port is down */
+#define EXT_SIA_SUSPECT 0x0805 /* Suspect the EXT SIA port is down */
+#define BNC_SUSPECT 0x0806 /* Suspect the BNC port is down */
+#define AUI_SUSPECT 0x0807 /* Suspect the AUI port is down */
+#define MII 0x1000 /* MII on the 21143 */
-#define AUTO 0x4000 /* Auto sense the media or speed */
-#define TIMER_CB 0x80000000 /* Timer callback detection */
+#define AUTO 0x4000 /* Auto sense the media or speed */
+#define TIMER_CB 0x80000000 /* Timer callback detection */
/*
** DE4X5 DEBUG Options
@@ -798,7 +844,6 @@
#define POLL_DEMAND 1
#define LOST_MEDIA_THRESHOLD 3
-#define LOST_MEDIA (lp->lostMedia > LOST_MEDIA_THRESHOLD)
#define MASK_INTERRUPTS 1
#define UNMASK_INTERRUPTS 0
@@ -859,7 +904,7 @@
}\
omr |= ((lp->fdx ? OMR_FDX : 0) | OMR_TTM);\
outl(omr, DE4X5_OMR);\
- lp->cache.gep = 0;\
+ if (!lp->useSROM) lp->cache.gep = 0;\
} else if (lp->useSROM && !lp->useMII) {\
omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
omr |= (lp->fdx ? OMR_FDX : 0);\
@@ -887,7 +932,7 @@
}\
if (fdx) omr |= OMR_FDX;\
outl(omr, DE4X5_OMR);\
- lp->cache.gep = 0;\
+ if (!lp->useSROM) lp->cache.gep = 0;\
} else if (lp->useSROM && !lp->useMII) {\
omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
omr |= (lp->fdx ? OMR_FDX : 0);\
@@ -906,7 +951,6 @@
mii_wr(MII_CR_100|MII_CR_ASSE, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
outl(omr, DE4X5_OMR);\
- lp->cache.gep = 0;\
} else if (lp->useSROM && !lp->useMII) {\
omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
outl(omr, DE4X5_OMR);\
@@ -934,7 +978,7 @@
** Recognised commands for the driver
*/
#define DE4X5_GET_HWADDR 0x01 /* Get the hardware address */
-#define DE4X5_SET_HWADDR 0x02 /* Get the hardware address */
+#define DE4X5_SET_HWADDR 0x02 /* Set the hardware address */
#define DE4X5_SET_PROM 0x03 /* Set Promiscuous Mode */
#define DE4X5_CLR_PROM 0x04 /* Clear Promiscuous Mode */
#define DE4X5_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov