patch-2.1.45 linux/drivers/sound/Config.in

• Lines: 289
• Date: Wed Jul 16 19:22:51 1997
• Orig file: v2.1.44/linux/drivers/sound/Config.in
• Orig date: Wed May 28 10:51:32 1997

diff -u --recursive --new-file v2.1.44/linux/drivers/sound/Config.in linux/drivers/sound/Config.in
@@ -1,15 +1,277 @@
-#
-# Sound driver configuration
-#
-#--------
-# There is another confic script which is compatible with rest of
-# the kernel. It can be activated by running 'make mkscript' in this
-# directory. Please note that this is an _experimental_ feature which
-# doesn't work with all cards (PSS, SM Wave, AudioTriX Pro, Maui).
-#--------
-#
-$MAKE -C drivers/sound config || exit 1
+bool 'ProAudioSpectrum 16 support' CONFIG_PAS
+bool '100%% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support' CONFIG_SB
+bool 'Generic OPL2/OPL3 FM synthesizer support' CONFIG_ADLIB
+bool 'Gravis Ultrasound support' CONFIG_GUS
+bool 'MPU-401 support (NOT for SB16)' CONFIG_MPU401
+bool 'PSS (ECHO-ADI2111) support' CONFIG_PSS
+bool '16 bit sampling option of GUS (_NOT_ GUS MAX)' CONFIG_GUS16
+bool 'GUS MAX support' CONFIG_GUSMAX
+bool 'Microsoft Sound System support' CONFIG_MSS
+bool 'Ensoniq SoundScape support' CONFIG_SSCAPE
+bool 'MediaTrix AudioTrix Pro support' CONFIG_TRIX
+bool 'Support for MAD16 and/or Mozart based cards' CONFIG_MAD16
+bool 'Support for Crystal CS4232 based (PnP) cards' CONFIG_CS4232
+bool 'Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers' CONFIG_MAUI
+bool 'FM synthesizer (YM3812/OPL-3) support' CONFIG_YM3812
+
+if [ "$CONFIG_AEDSP16" = "y" ]; then
+hex 'I/O base for Audio Excel DSP 16 220 or 240' AEDSP16_BASE 220
+fi
+
+if [ "$CONFIG_SB" = "y" ]; then
+hex 'I/O base for SB Check from manual of the card' SBC_BASE 220
+fi
+
+if [ "$CONFIG_SB" = "y" ]; then
+int 'Sound Blaster IRQ Check from manual of the card' SBC_IRQ 7
+fi
+
+if [ "$CONFIG_SB" = "y" ]; then
+int 'Sound Blaster DMA 0, 1 or 3' SBC_DMA 1
+fi
+
+if [ "$CONFIG_SB" = "y" ]; then
+int 'Sound Blaster 16 bit DMA (SB16, Jazz16, SMW) 5, 6 or 7 (use 1 for 8 bit cards)' SB_DMA2 5
+fi
+
+if [ "$CONFIG_SB" = "y" ]; then
+hex 'MPU401 I/O base of SB16, Jazz16 and ES1688 Check from manual of the card' SB_MPU_BASE 330
+fi
+
+
+if [ "$CONFIG_SB" = "y" ]; then
+comment 'MPU401 IRQ is only required with Jazz16, SM Wave and ESS1688.'
+fi
+
+
+if [ "$CONFIG_SB" = "y" ]; then
+comment 'Enter -1 to the following question if you have something else such as SB16/32.'
+fi
+
+if [ "$CONFIG_SB" = "y" ]; then
+int 'SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Check from manual of the card' SB_MPU_IRQ -1
+fi
+
+if [ "$CONFIG_PAS" = "y" ]; then
+int 'PAS16 IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14 or 15' PAS_IRQ 10
+fi
+
+if [ "$CONFIG_PAS" = "y" ]; then
+int 'PAS16 DMA 0, 1, 3, 5, 6 or 7' PAS_DMA 3
+fi
+
+if [ "$CONFIG_GUS" = "y" ]; then
+hex 'I/O base for GUS 210, 220, 230, 240, 250 or 260' GUS_BASE 220
+fi
+
+if [ "$CONFIG_GUS" = "y" ]; then
+int 'GUS IRQ 3, 5, 7, 9, 11, 12 or 15' GUS_IRQ 15
+fi
+
+if [ "$CONFIG_GUS" = "y" ]; then
+int 'GUS DMA 1, 3, 5, 6 or 7' GUS_DMA 6
+fi
+
+if [ "$CONFIG_GUS" = "y" ]; then
+int 'Second DMA channel for GUS 1, 3, 5, 6 or 7' GUS_DMA2 -1
+fi
+
+if [ "$CONFIG_GUS16" = "y" ]; then
+hex 'I/O base for the 16 bit daughtercard of GUS 530, 604, E80 or F40' GUS16_BASE 530
+fi
+
+if [ "$CONFIG_GUS16" = "y" ]; then
+int 'GUS 16 bit daughtercard IRQ 3, 4, 5, 7, or 9' GUS16_IRQ 7
+fi
+
+if [ "$CONFIG_GUS16" = "y" ]; then
+int 'GUS DMA 0, 1 or 3' GUS16_DMA 3
+fi
+
+if [ "$CONFIG_MPU401" = "y" ]; then
+hex 'I/O base for MPU401 Check from manual of the card' MPU_BASE 330
+fi
+
+if [ "$CONFIG_MPU401" = "y" ]; then
+int 'MPU401 IRQ Check from manual of the card' MPU_IRQ 9
+fi
+
+
+if [ "$CONFIG_MAUI" = "y" ]; then
+comment 'ERROR! You have to use old sound configuration method with Maui.'
+fi
+
+if [ "$CONFIG_MAUI" = "y" ]; then
+hex 'I/O base for Maui 210, 230, 260, 290, 300, 320, 338 or 330' MAUI_BASE 330
+fi
+
+if [ "$CONFIG_MAUI" = "y" ]; then
+int 'Maui IRQ 5, 9, 12 or 15' MAUI_IRQ 9
+fi
+
+if [ "$CONFIG_UART6850" = "y" ]; then
+hex 'I/O base for UART 6850 MIDI port (Unknown)' U6850_BASE 0
+fi
+
+if [ "$CONFIG_UART6850" = "y" ]; then
+int 'UART6850 IRQ (Unknown)' U6850_IRQ -1
+fi
+
+
+if [ "$CONFIG_PSS" = "y" ]; then
+comment 'ERROR! You have to use old sound configuration method with PSS cards.'
+fi
+
+if [ "$CONFIG_PSS" = "y" ]; then
+hex 'PSS I/O base 220 or 240' PSS_BASE 220
+fi
+
+if [ "$CONFIG_PSS" = "y" ]; then
+hex 'PSS audio I/O base 530, 604, E80 or F40' PSS_MSS_BASE 530
+fi
+
+if [ "$CONFIG_PSS" = "y" ]; then
+int 'PSS audio IRQ 7, 9, 10 or 11' PSS_MSS_IRQ 11
+fi
 
+if [ "$CONFIG_PSS" = "y" ]; then
+int 'PSS audio DMA 0, 1 or 3' PSS_MSS_DMA 3
+fi
+
+if [ "$CONFIG_PSS" = "y" ]; then
+hex 'PSS MIDI I/O base ' PSS_MPU_BASE 330
+fi
+
+if [ "$CONFIG_PSS" = "y" ]; then
+int 'PSS MIDI IRQ 3, 4, 5, 7 or 9' PSS_MPU_IRQ 9
+fi
+
+if [ "$CONFIG_MSS" = "y" ]; then
+hex 'MSS/WSS I/O base 530, 604, E80 or F40' MSS_BASE 530
+fi
+
+if [ "$CONFIG_MSS" = "y" ]; then
+int 'MSS/WSS IRQ 7, 9, 10 or 11' MSS_IRQ 11
+fi
+
+if [ "$CONFIG_MSS" = "y" ]; then
+int 'MSS/WSS DMA 0, 1 or 3' MSS_DMA 3
+fi
+
+if [ "$CONFIG_MSS" = "y" ]; then
+int 'MSS/WSS second DMA (if possible) 0, 1 or 3' MSS_DMA2 -1
+fi
+
+if [ "$CONFIG_SSCAPE" = "y" ]; then
+hex 'SoundScape MIDI I/O base 320, 330, 340 or 350' SSCAPE_BASE 330
+fi
+
+if [ "$CONFIG_SSCAPE" = "y" ]; then
+int 'SoundScape MIDI IRQ ' SSCAPE_IRQ 9
+fi
+
+if [ "$CONFIG_SSCAPE" = "y" ]; then
+int 'SoundScape initialization DMA 0, 1 or 3' SSCAPE_DMA 3
+fi
+
+if [ "$CONFIG_SSCAPE" = "y" ]; then
+hex 'SoundScape audio I/O base 534, 608, E84 or F44' SSCAPE_MSS_BASE 534
+fi
+
+if [ "$CONFIG_SSCAPE" = "y" ]; then
+int 'SoundScape audio IRQ 7, 9, 10 or 11' SSCAPE_MSS_IRQ 11
+fi
+
+
+if [ "$CONFIG_TRIX" = "y" ]; then
+comment 'ERROR! You have to use old sound configuration method with AudioTrix.'
+fi
+
+if [ "$CONFIG_TRIX" = "y" ]; then
+hex 'AudioTrix audio I/O base 530, 604, E80 or F40' TRIX_BASE 530
+fi
+
+if [ "$CONFIG_TRIX" = "y" ]; then
+int 'AudioTrix audio IRQ 7, 9, 10 or 11' TRIX_IRQ 11
+fi
+
+if [ "$CONFIG_TRIX" = "y" ]; then
+int 'AudioTrix audio DMA 0, 1 or 3' TRIX_DMA 0
+fi
+
+if [ "$CONFIG_TRIX" = "y" ]; then
+int 'AudioTrix second (duplex) DMA 0, 1 or 3' TRIX_DMA2 3
+fi
+
+if [ "$CONFIG_TRIX" = "y" ]; then
+hex 'AudioTrix MIDI I/O base 330, 370, 3B0 or 3F0' TRIX_MPU_BASE 330
+fi
+
+if [ "$CONFIG_TRIX" = "y" ]; then
+int 'AudioTrix MIDI IRQ 3, 4, 5, 7 or 9' TRIX_MPU_IRQ 9
+fi
+
+if [ "$CONFIG_TRIX" = "y" ]; then
+hex 'AudioTrix SB I/O base 220, 210, 230, 240, 250, 260 or 270' TRIX_SB_BASE 220
+fi
+
+if [ "$CONFIG_TRIX" = "y" ]; then
+int 'AudioTrix SB IRQ 3, 4, 5 or 7' TRIX_SB_IRQ 7
+fi
+
+if [ "$CONFIG_TRIX" = "y" ]; then
+int 'AudioTrix SB DMA 1 or 3' TRIX_SB_DMA 1
+fi
+
+if [ "$CONFIG_CS4232" = "y" ]; then
+hex 'CS4232 audio I/O base 530, 604, E80 or F40' CS4232_BASE 530
+fi
+
+if [ "$CONFIG_CS4232" = "y" ]; then
+int 'CS4232 audio IRQ 5, 7, 9, 11, 12 or 15' CS4232_IRQ 11
+fi
+
+if [ "$CONFIG_CS4232" = "y" ]; then
+int 'CS4232 audio DMA 0, 1 or 3' CS4232_DMA 0
+fi
+
+if [ "$CONFIG_CS4232" = "y" ]; then
+int 'CS4232 second (duplex) DMA 0, 1 or 3' CS4232_DMA2 3
+fi
+
+if [ "$CONFIG_CS4232" = "y" ]; then
+hex 'CS4232 MIDI I/O base 330, 370, 3B0 or 3F0' CS4232_MPU_BASE 330
+fi
+
+if [ "$CONFIG_CS4232" = "y" ]; then
+int 'CS4232 MIDI IRQ 5, 7, 9, 11, 12 or 15' CS4232_MPU_IRQ 9
+fi
+
+if [ "$CONFIG_MAD16" = "y" ]; then
+hex 'MAD16 audio I/O base 530, 604, E80 or F40' MAD16_BASE 530
+fi
+
+if [ "$CONFIG_MAD16" = "y" ]; then
+int 'MAD16 audio IRQ 7, 9, 10 or 11' MAD16_IRQ 11
+fi
+
+if [ "$CONFIG_MAD16" = "y" ]; then
+int 'MAD16 audio DMA 0, 1 or 3' MAD16_DMA 3
+fi
+
+if [ "$CONFIG_MAD16" = "y" ]; then
+int 'MAD16 second (duplex) DMA 0, 1 or 3' MAD16_DMA2 0
+fi
+
+if [ "$CONFIG_MAD16" = "y" ]; then
+hex 'MAD16 MIDI I/O base 300, 310, 320 or 330 (0 disables)' MAD16_MPU_BASE 330
+fi
+
+if [ "$CONFIG_MAD16" = "y" ]; then
+int 'MAD16 MIDI IRQ 5, 7, 9 or 10' MAD16_MPU_IRQ 9
+fi
+#
+$MAKE -C drivers/sound kernelconfig || exit 1
 bool 'Additional low level drivers' CONFIG_LOWLEVEL_SOUND
 
 if [ "$CONFIG_LOWLEVEL_SOUND" = "y" ]; then