patch-2.1.6 linux/drivers/net/scc.c
Next file: linux/drivers/net/slhc.c
Previous file: linux/drivers/net/pt.c
Back to the patch index
Back to the overall index
- Lines: 2288
- Date:
Tue Oct 29 16:35:48 1996
- Orig file:
v2.1.5/linux/drivers/net/scc.c
- Orig date:
Thu Jan 1 02:00:00 1970
diff -u --recursive --new-file v2.1.5/linux/drivers/net/scc.c linux/drivers/net/scc.c
@@ -0,0 +1,2287 @@
+#define RCS_ID "$Id: scc.c,v 1.63 1996/10/09 16:45:47 jreuter Exp jreuter $"
+
+#define VERSION "3.0"
+#define BANNER "Z8530 SCC driver version "VERSION".dl1bke (experimental) by DL1BKE\n"
+
+/*
+ * Please use z8530drv-utils-3.0 with this version.
+ * ------------------
+ */
+
+/*
+ ********************************************************************
+ * SCC.C - Linux driver for Z8530 based HDLC cards for AX.25 *
+ ********************************************************************
+
+
+ ********************************************************************
+
+ Copyright (c) 1993, 1996 Joerg Reuter DL1BKE
+
+ portions (c) 1993 Guido ten Dolle PE1NNZ
+
+ ********************************************************************
+
+ The driver and the programs in the archive are UNDER CONSTRUCTION.
+ The code is likely to fail, and so your kernel could --- even
+ a whole network.
+
+ This driver is intended for Amateur Radio use. If you are running it
+ for commercial purposes, please drop me a note. I am nosy...
+
+ ...BUT:
+
+ ! You m u s t recognize the appropriate legislations of your country !
+ ! before you connect a radio to the SCC board and start to transmit or !
+ ! receive. The GPL allows you to use the d r i v e r, NOT the RADIO! !
+
+ For non-Amateur-Radio use please note that you might need a special
+ allowance/licence from the designer of the SCC Board and/or the
+ MODEM.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the (modified) GNU General Public License
+ delivered with the Linux kernel source.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should find a copy of the GNU General Public License in
+ /usr/src/linux/COPYING;
+
+ ********************************************************************
+
+
+ Incomplete history of z8530drv:
+ -------------------------------
+
+ 940913 - started to write the driver, rescued most of my own
+ code (and Hans Alblas' memory buffer pool concept) from
+ an earlier project "sccdrv" which was initiated by
+ Guido ten Dolle. Not much of the old driver survived,
+ though. The first version I put my hands on was sccdrv1.3
+ from August 1993. The memory buffer pool concept
+ appeared in an unauthorized sccdrv version (1.5) from
+ August 1994.
+
+ 950131 - changed copyright notice to GPL without limitations.
+
+ .
+ . <SNIP>
+ .
+
+ 961005 - New semester, new driver...
+
+ * KISS TNC emulator removed (TTY driver)
+ * Source moved to drivers/net/
+ * Includes Z8530 defines from drivers/net/z8530.h
+ * Uses sk_buffer memory management
+ * Doesn't have own queues anymore
+ * Reduced overhead of /proc/net/z8530drv output
+ * Streamlined quite a lot things
+ * Invents brand new bugs... ;-)
+
+ The move to version number 3.0 reflects theses changes.
+ You can use version 2.4 if you need a KISS TNC emulator.
+
+ Thanks to all who contributed to this driver with ideas and bug
+ reports!
+
+ NB -- if you find errors, change something, please let me know
+ first before you distribute it... And please don't touch
+ the version number. Just replace my callsign in
+ "v3.0.dl1bke" with your own. Just to avoid confusion...
+
+ If you want to add your modification to the linux distribution
+ please (!) contact me first.
+
+ New versions of the driver will be announced on the linux-hams
+ mailing list on vger.rutgers.edu. To subscribe send an e-mail
+ to majordomo@vger.rutgers.edu with the following line in
+ the body of the mail:
+
+ subscribe linux-hams
+
+ The content of the "Subject" field will be ignored.
+
+ vy 73,
+ Joerg Reuter ampr-net: dl1bke@db0pra.ampr.org
+ AX-25 : DL1BKE @ DB0ACH.#NRW.DEU.EU
+ Internet: jreuter@lykos.oche.de
+*/
+
+/* ----------------------------------------------------------------------- */
+
+#undef SCC_DELAY /* perhaps your ISA bus is a *bit* too fast? */
+#undef SCC_LDELAY 1 /* slow it even a bit more down */
+#undef DONT_CHECK /* don't look if the SCCs you specified are available */
+
+#define MAXSCC 4 /* number of max. supported chips */
+#define BUFSIZE 384 /* must not exceed 4096 */
+#undef DISABLE_ALL_INTS /* use cli()/sti() in ISR instead of */
+ /* enable_irq()/disable_irq() */
+#undef SCC_DEBUG
+
+#define DEFAULT_CLOCK 4915200 /* default pclock if nothing is specified */
+
+/* ----------------------------------------------------------------------- */
+
+#include <linux/module.h>
+#include <linux/config.h>
+
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/string.h>
+#include <linux/in.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/malloc.h>
+#include <linux/delay.h>
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <linux/socket.h>
+
+#include <linux/scc.h>
+#include "z8530.h"
+
+#include <net/ax25.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/bitops.h>
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <ctype.h>
+#include <time.h>
+#include <linux/kernel.h>
+#include <linux/proc_fs.h>
+
+#ifdef MODULE
+int init_module(void);
+void cleanup_module(void);
+#endif
+
+int scc_init(void);
+
+static void t_dwait(unsigned long);
+static void t_txdelay(unsigned long);
+static void t_tail(unsigned long);
+static void t_busy(unsigned long);
+static void t_maxkeyup(unsigned long);
+static void t_idle(unsigned long);
+static void scc_tx_done(struct scc_channel *);
+static void scc_start_tx_timer(struct scc_channel *, void (*)(unsigned long), unsigned long);
+static void scc_start_maxkeyup(struct scc_channel *);
+static void scc_start_defer(struct scc_channel *);
+
+static void z8530_init(void);
+
+static void init_channel(struct scc_channel *scc);
+static void scc_key_trx (struct scc_channel *scc, char tx);
+static void scc_isr(int irq, void *dev_id, struct pt_regs *regs);
+static void scc_init_timer(struct scc_channel *scc);
+
+static int scc_net_setup(struct scc_channel *scc, unsigned char *name);
+static int scc_net_init(struct device *dev);
+static int scc_net_open(struct device *dev);
+static int scc_net_close(struct device *dev);
+static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb);
+static int scc_net_tx(struct sk_buff *skb, struct device *dev);
+static int scc_net_ioctl(struct device *dev, struct ifreq *ifr, int cmd);
+static int scc_net_set_mac_address(struct device *dev, void *addr);
+static int scc_net_rebuild_header(void *buff, struct device *dev, unsigned long raddr, struct sk_buff *skb);
+static int scc_net_header(struct sk_buff *skb, struct device *dev, unsigned short type, void *daddr, void *saddr, unsigned len);
+static struct enet_statistics * scc_net_get_stats(struct device *dev);
+
+static unsigned char *SCC_DriverName = "scc";
+
+static struct irqflags { unsigned char used : 1; } Ivec[16];
+
+static struct scc_channel SCC_Info[2 * MAXSCC]; /* information per channel */
+
+static struct scc_ctrl {
+ io_port chan_A;
+ io_port chan_B;
+ int irq;
+} SCC_ctrl[MAXSCC+1];
+
+static unsigned char Driver_Initialized = 0;
+static int Nchips = 0;
+static io_port Vector_Latch = 0;
+
+
+/* ******************************************************************** */
+/* * Port Access Functions * */
+/* ******************************************************************** */
+
+/* These provide interrupt save 2-step access to the Z8530 registers */
+
+static __inline__ unsigned char
+InReg(io_port port, unsigned char reg)
+{
+ unsigned long flags;
+ unsigned char r;
+
+ save_flags(flags);
+ cli();
+#ifdef SCC_LDELAY
+ Outb(port, reg);
+ udelay(SCC_LDELAY);
+ r=Inb(port);
+ udelay(SCC_LDELAY);
+#else
+ Outb(port, reg);
+ r=Inb(port);
+#endif
+ restore_flags(flags);
+ return r;
+}
+
+static __inline__ void
+OutReg(io_port port, unsigned char reg, unsigned char val)
+{
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+#ifdef SCC_LDELAY
+ Outb(port, reg); udelay(SCC_LDELAY);
+ Outb(port, val); udelay(SCC_LDELAY);
+#else
+ Outb(port, reg);
+ Outb(port, val);
+#endif
+ restore_flags(flags);
+}
+
+static __inline__ void
+wr(struct scc_channel *scc, unsigned char reg, unsigned char val)
+{
+ OutReg(scc->ctrl, reg, (scc->wreg[reg] = val));
+}
+
+static __inline__ void
+or(struct scc_channel *scc, unsigned char reg, unsigned char val)
+{
+ OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val));
+}
+
+static __inline__ void
+cl(struct scc_channel *scc, unsigned char reg, unsigned char val)
+{
+ OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val));
+}
+
+#ifdef DISABLE_ALL_INTS
+static __inline__ void scc_cli(int irq)
+{ cli(); }
+static __inline__ void scc_sti(int irq)
+{ sti(); }
+#else
+static __inline__ void scc_cli(int irq)
+{ disable_irq(irq); }
+static __inline__ void scc_sti(int irq)
+{ enable_irq(irq); }
+#endif
+
+/* ******************************************************************** */
+/* * Some useful macros * */
+/* ******************************************************************** */
+
+
+static __inline__ void
+scc_lock_dev(struct scc_channel *scc)
+{
+ scc->dev->tbusy = 1;
+}
+
+static __inline__ void
+scc_unlock_dev(struct scc_channel *scc)
+{
+ scc->tx_next_buff = NULL;
+ scc->dev->tbusy = 0;
+}
+
+static __inline__ void
+scc_discard_buffers(struct scc_channel *scc)
+{
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+
+ if (scc->tx_buff != NULL)
+ {
+ dev_kfree_skb(scc->tx_buff, FREE_WRITE);
+ scc->tx_buff = NULL;
+ }
+
+ if (scc->tx_next_buff != NULL)
+ {
+ dev_kfree_skb(scc->tx_next_buff, FREE_WRITE);
+ scc->tx_next_buff = NULL;
+ }
+
+ restore_flags(flags);
+}
+
+
+
+/* ******************************************************************** */
+/* * Interrupt Service Routines * */
+/* ******************************************************************** */
+
+
+/* ----> subroutines for the interrupt handlers <---- */
+
+static __inline__ void
+scc_notify(struct scc_channel *scc, int event)
+{
+ struct sk_buff *skb;
+ char *bp;
+
+ if (scc->kiss.fulldup != KISS_DUPLEX_OPTIMA)
+ return;
+
+ skb = dev_alloc_skb(2);
+ if (skb != NULL)
+ {
+ skb->free = 1;
+ bp = skb_put(skb, 2);
+ *bp++ = PARAM_HWEVENT;
+ *bp++ = event;
+ scc_net_rx(scc, skb);
+ } else
+ scc->stat.nospace++;
+}
+
+static __inline__ void
+flush_rx_FIFO(struct scc_channel *scc)
+{
+ int k;
+
+ for (k=0; k<3; k++)
+ Inb(scc->data);
+
+ if(scc->rx_buff != NULL) /* did we receive something? */
+ {
+ scc->stat.rxerrs++; /* then count it as an error */
+ kfree_skb(scc->rx_buff, FREE_READ);
+ scc->rx_buff = NULL;
+ }
+}
+
+
+/* ----> four different interrupt handlers for Tx, Rx, changing of */
+/* DCD/CTS and Rx/Tx errors */
+
+/* Transmitter interrupt handler */
+static __inline__ void
+scc_txint(struct scc_channel *scc)
+{
+ struct sk_buff *skb;
+
+ scc->stat.txints++;
+ skb = scc->tx_buff;
+
+ /* send first octet */
+
+ if (skb == NULL)
+ {
+ skb = scc->tx_next_buff;
+ scc->tx_buff = skb;
+
+ if (skb == NULL)
+ {
+ scc_tx_done(scc);
+ Outb(scc->ctrl, RES_Tx_P);
+ return;
+ }
+
+ if (skb->len == 0) /* Paranoia... */
+ {
+ dev_kfree_skb(skb, FREE_WRITE);
+ scc->tx_buff = NULL;
+ scc_tx_done(scc);
+ Outb(scc->ctrl, RES_Tx_P);
+ return;
+ }
+
+ scc_unlock_dev(scc);
+
+ scc->stat.tx_state = TXS_ACTIVE;
+
+ OutReg(scc->ctrl, R0, RES_Tx_CRC);
+ /* reset CRC generator */
+ or(scc,R10,ABUNDER); /* re-install underrun protection */
+ Outb(scc->data,*skb->data); /* send byte */
+ skb_pull(skb, 1);
+
+ if (!scc->enhanced) /* reset EOM latch */
+ Outb(scc->ctrl,RES_EOM_L);
+ return;
+ }
+
+ /* End Of Frame... */
+
+ if (skb->len == 0)
+ {
+ Outb(scc->ctrl, RES_Tx_P); /* reset pending int */
+ cl(scc, R10, ABUNDER); /* send CRC */
+ dev_kfree_skb(skb, FREE_WRITE);
+ scc->tx_buff = NULL;
+ scc->stat.tx_state = TXS_NEWFRAME; /* next frame... */
+ return;
+ }
+
+ /* send octet */
+
+ Outb(scc->data,*skb->data);
+ skb_pull(skb, 1);
+}
+
+
+/* External/Status interrupt handler */
+static __inline__ void
+scc_exint(struct scc_channel *scc)
+{
+ unsigned char status,changes,chg_and_stat;
+
+ scc->stat.exints++;
+
+ status = InReg(scc->ctrl,R0);
+ changes = status ^ scc->status;
+ chg_and_stat = changes & status;
+
+ /* ABORT: generated whenever DCD drops while receiving */
+
+ if (chg_and_stat & BRK_ABRT) /* Received an ABORT */
+ flush_rx_FIFO(scc);
+
+
+ /* DCD: on = start to receive packet, off = ABORT condition */
+ /* (a successfully received packet generates a special condition int) */
+
+ if(changes & DCD) /* DCD input changed state */
+ {
+ if(status & DCD) /* DCD is now ON */
+ {
+ if (scc->modem.clocksrc != CLK_EXTERNAL)
+ OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */
+
+ or(scc,R3,ENT_HM|RxENABLE); /* enable the receiver, hunt mode */
+ } else { /* DCD is now OFF */
+ cl(scc,R3,ENT_HM|RxENABLE); /* disable the receiver */
+ flush_rx_FIFO(scc);
+ }
+
+ if (!scc->kiss.softdcd)
+ scc_notify(scc, (status & DCD)? HWEV_DCD_ON:HWEV_DCD_OFF);
+ }
+
+ /* HUNT: software DCD; on = waiting for SYNC, off = receiving frame */
+
+ if (changes & SYNC_HUNT)
+ {
+ if (scc->kiss.softdcd)
+ scc_notify(scc, (status & SYNC_HUNT)? HWEV_DCD_OFF:HWEV_DCD_ON);
+ else
+ cl(scc,R15,SYNCIE); /* oops, we were too lazy to disable this? */
+ }
+
+#ifdef notdef
+ /* CTS: use external TxDelay (what's that good for?!)
+ * Anyway: If we _could_ use it (BayCom USCC uses CTS for
+ * own purposes) we _should_ use the "autoenable" feature
+ * of the Z8530 and not this interrupt...
+ */
+
+ if (chg_and_stat & CTS) /* CTS is now ON */
+ {
+ if (scc->kiss.txdelay == 0) /* zero TXDELAY = wait for CTS */
+ scc_start_tx_timer(scc, t_txdelay, 0);
+ }
+#endif
+
+ if (scc->stat.tx_state == TXS_ACTIVE && (status & TxEOM))
+ {
+ scc->stat.tx_under++; /* oops, an underrun! count 'em */
+ Outb(scc->ctrl, RES_EXT_INT); /* reset ext/status interrupts */
+
+ if (scc->tx_buff != NULL)
+ {
+ dev_kfree_skb(scc->tx_buff, FREE_WRITE);
+ scc->tx_buff = NULL;
+ }
+
+ or(scc,R10,ABUNDER);
+ scc_start_tx_timer(scc, t_txdelay, 1); /* restart transmission */
+ }
+
+ scc->status = status;
+ Outb(scc->ctrl,RES_EXT_INT);
+}
+
+
+/* Receiver interrupt handler */
+static __inline__ void
+scc_rxint(struct scc_channel *scc)
+{
+ struct sk_buff *skb;
+
+ scc->stat.rxints++;
+
+ if((scc->wreg[5] & RTS) && scc->kiss.fulldup == KISS_DUPLEX_HALF)
+ {
+ Inb(scc->data); /* discard char */
+ or(scc,R3,ENT_HM); /* enter hunt mode for next flag */
+ return;
+ }
+
+ skb = scc->rx_buff;
+
+ if (skb == NULL)
+ {
+ skb = dev_alloc_skb(scc->stat.bufsize);
+ if (skb == NULL)
+ {
+ scc->dev_stat.rx_dropped++;
+ scc->stat.nospace++;
+ Inb(scc->data);
+ or(scc, R3, ENT_HM);
+ return;
+ }
+
+ skb->free = 1;
+ scc->rx_buff = skb;
+
+ *(skb_put(skb, 1)) = 0; /* KISS data */
+ }
+
+ if (skb->len >= scc->stat.bufsize)
+ {
+#ifdef notdef
+ printk(KERN_DEBUG "z8530drv: oops, scc_rxint() received huge frame...\n");
+#endif
+ kfree_skb(skb, FREE_READ);
+ scc->rx_buff = NULL;
+ Inb(scc->data);
+ or(scc, R3, ENT_HM);
+ return;
+ }
+
+ *(skb_put(skb, 1)) = Inb(scc->data);
+}
+
+
+/* Receive Special Condition interrupt handler */
+static __inline__ void
+scc_spint(struct scc_channel *scc)
+{
+ unsigned char status;
+ struct sk_buff *skb;
+
+ scc->stat.spints++;
+
+ status = InReg(scc->ctrl,R1); /* read receiver status */
+
+ Inb(scc->data); /* throw away Rx byte */
+ skb = scc->rx_buff;
+
+ if(status & Rx_OVR) /* receiver overrun */
+ {
+ scc->stat.rx_over++; /* count them */
+ or(scc,R3,ENT_HM); /* enter hunt mode for next flag */
+
+ if (skb != NULL)
+ kfree_skb(skb, FREE_READ);
+ scc->rx_buff = NULL;
+ }
+
+ if(status & END_FR && skb != NULL) /* end of frame */
+ {
+ /* CRC okay, frame ends on 8 bit boundary and received something ? */
+
+ if (!(status & CRC_ERR) && (status & 0xe) == RES8 && skb->len > 0)
+ {
+ /* ignore last received byte (first of the CRC bytes) */
+ skb_trim(skb, skb->len-1);
+ scc_net_rx(scc, skb);
+ scc->rx_buff = NULL;
+ scc->stat.rxframes++;
+ } else { /* a bad frame */
+ kfree_skb(skb, FREE_READ);
+ scc->rx_buff = NULL;
+ scc->stat.rxerrs++;
+ }
+ }
+
+ Outb(scc->ctrl,ERR_RES);
+}
+
+
+/* ----> interrupt service routine for the Z8530 <---- */
+
+static void
+scc_isr_dispatch(struct scc_channel *scc, int vector)
+{
+ switch (vector & VECTOR_MASK)
+ {
+ case TXINT: scc_txint(scc); break;
+ case EXINT: scc_exint(scc); break;
+ case RXINT: scc_rxint(scc); break;
+ case SPINT: scc_spint(scc); break;
+ }
+}
+
+/* If the card has a latch for the interrupt vector (like the PA0HZP card)
+ use it to get the number of the chip that generated the int.
+ If not: poll all defined chips.
+ */
+
+#define SCC_IRQTIMEOUT 30000
+
+static void
+scc_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned char vector;
+ struct scc_channel *scc;
+ struct scc_ctrl *ctrl;
+ int k;
+
+ scc_cli(irq);
+
+ if (Vector_Latch)
+ {
+ for(k=0; k < SCC_IRQTIMEOUT; k++)
+ {
+ Outb(Vector_Latch, 0); /* Generate INTACK */
+
+ /* Read the vector */
+ if((vector=Inb(Vector_Latch)) >= 16 * Nchips) break;
+ if (vector & 0x01) break;
+
+ scc=&SCC_Info[vector >> 3 ^ 0x01];
+ if (!scc->dev) break;
+
+ scc_isr_dispatch(scc, vector);
+
+ OutReg(scc->ctrl,R0,RES_H_IUS); /* Reset Highest IUS */
+ }
+ scc_sti(irq);
+
+ if (k == SCC_IRQTIMEOUT)
+ printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?\n");
+
+ return;
+ }
+
+ /* Find the SCC generating the interrupt by polling all attached SCCs
+ * reading RR3A (the interrupt pending register)
+ */
+
+ ctrl = SCC_ctrl;
+ while (ctrl->chan_A)
+ {
+ if (ctrl->irq != irq)
+ {
+ ctrl++;
+ continue;
+ }
+
+ scc = NULL;
+ for (k = 0; InReg(ctrl->chan_A,R3) && k < SCC_IRQTIMEOUT; k++)
+ {
+ vector=InReg(ctrl->chan_B,R2); /* Read the vector */
+ if (vector & 0x01) break;
+
+ scc = &SCC_Info[vector >> 3 ^ 0x01];
+ if (!scc->dev) break;
+
+ scc_isr_dispatch(scc, vector);
+ }
+
+ if (k == SCC_IRQTIMEOUT)
+ {
+ printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?!\n");
+ break;
+ }
+
+ /* This looks wierd and it is. At least the BayCom USCC doesn't
+ * use the Interrupt Daisy Chain, thus we'll have to start
+ * all over again to be sure not to miss an interrupt from
+ * (any of) the other chip(s)...
+ * Honestly, the situation *is* braindamaged...
+ */
+
+ if (scc != NULL)
+ {
+ OutReg(scc->ctrl,R0,RES_H_IUS);
+ ctrl = SCC_ctrl;
+ } else
+ ctrl++;
+ }
+
+ scc_sti(irq);
+}
+
+
+
+/* ******************************************************************** */
+/* * Init Channel */
+/* ******************************************************************** */
+
+
+/* ----> set SCC channel speed <---- */
+
+static __inline__ void
+set_brg(struct scc_channel *scc, unsigned int tc)
+{
+ cl(scc,R14,BRENABL); /* disable baudrate generator */
+ wr(scc,R12,tc & 255); /* brg rate LOW */
+ wr(scc,R13,tc >> 8); /* brg rate HIGH */
+ or(scc,R14,BRENABL); /* enable baudrate generator */
+}
+
+static __inline__ void
+set_speed(struct scc_channel *scc)
+{
+ disable_irq(scc->irq);
+
+ if (scc->modem.speed > 0) /* paranoia... */
+ set_brg(scc, (unsigned) (scc->clock / (scc->modem.speed * 64)) - 2);
+
+ enable_irq(scc->irq);
+}
+
+
+/* ----> initialize a SCC channel <---- */
+
+static __inline__ void
+init_brg(struct scc_channel *scc)
+{
+ wr(scc, R14, BRSRC); /* BRG source = PCLK */
+ OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]); /* DPLL source = BRG */
+ OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]); /* DPLL NRZI mode */
+}
+
+/*
+ * Initialization according to the Z8530 manual (SGS-Thomson's version):
+ *
+ * 1. Modes and constants
+ *
+ * WR9 11000000 chip reset
+ * WR4 XXXXXXXX Tx/Rx control, async or sync mode
+ * WR1 0XX00X00 select W/REQ (optional)
+ * WR2 XXXXXXXX program interrupt vector
+ * WR3 XXXXXXX0 select Rx control
+ * WR5 XXXX0XXX select Tx control
+ * WR6 XXXXXXXX sync character
+ * WR7 XXXXXXXX sync character
+ * WR9 000X0XXX select interrupt control
+ * WR10 XXXXXXXX miscellaneous control (optional)
+ * WR11 XXXXXXXX clock control
+ * WR12 XXXXXXXX time constant lower byte (optional)
+ * WR13 XXXXXXXX time constant upper byte (optional)
+ * WR14 XXXXXXX0 miscellaneous control
+ * WR14 XXXSSSSS commands (optional)
+ *
+ * 2. Enables
+ *
+ * WR14 000SSSS1 baud rate enable
+ * WR3 SSSSSSS1 Rx enable
+ * WR5 SSSS1SSS Tx enable
+ * WR0 10000000 reset Tx CRG (optional)
+ * WR1 XSS00S00 DMA enable (optional)
+ *
+ * 3. Interrupt status
+ *
+ * WR15 XXXXXXXX enable external/status
+ * WR0 00010000 reset external status
+ * WR0 00010000 reset external status twice
+ * WR1 SSSXXSXX enable Rx, Tx and Ext/status
+ * WR9 000SXSSS enable master interrupt enable
+ *
+ * 1 = set to one, 0 = reset to zero
+ * X = user defined, S = same as previous init
+ *
+ *
+ * Note that the implementation differs in some points from above scheme.
+ *
+ */
+
+static void
+init_channel(struct scc_channel *scc)
+{
+ disable_irq(scc->irq);
+
+ if (scc->tx_t.next) del_timer(&scc->tx_t);
+ if (scc->tx_wdog.next) del_timer(&scc->tx_wdog);
+
+ wr(scc,R4,X1CLK|SDLC); /* *1 clock, SDLC mode */
+ wr(scc,R1,0); /* no W/REQ operation */
+ wr(scc,R3,Rx8|RxCRC_ENAB); /* RX 8 bits/char, CRC, disabled */
+ wr(scc,R5,Tx8|DTR|TxCRC_ENAB); /* TX 8 bits/char, disabled, DTR */
+ wr(scc,R6,0); /* SDLC address zero (not used) */
+ wr(scc,R7,FLAG); /* SDLC flag value */
+ wr(scc,R9,VIS); /* vector includes status */
+ wr(scc,R10,(scc->modem.nrz? NRZ : NRZI)|CRCPS|ABUNDER); /* abort on underrun, preset CRC generator, NRZ(I) */
+ wr(scc,R14, 0);
+
+
+/* set clock sources:
+
+ CLK_DPLL: normal halfduplex operation
+
+ RxClk: use DPLL
+ TxClk: use DPLL
+ TRxC mode DPLL output
+
+ CLK_EXTERNAL: external clocking (G3RUH or DF9IC modem)
+
+ BayCom: others:
+
+ TxClk = pin RTxC TxClk = pin TRxC
+ RxClk = pin TRxC RxClk = pin RTxC
+
+
+ CLK_DIVIDER:
+ RxClk = use DPLL
+ TxClk = pin RTxC
+
+ BayCom: others:
+ pin TRxC = DPLL pin TRxC = BRG
+ (RxClk * 1) (RxClk * 32)
+*/
+
+
+ switch(scc->modem.clocksrc)
+ {
+ case CLK_DPLL:
+ wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP);
+ init_brg(scc);
+ break;
+
+ case CLK_DIVIDER:
+ wr(scc, R11, ((scc->brand & BAYCOM)? TRxCDP : TRxCBR) | RCDPLL|TCRTxCP|TRxCOI);
+ init_brg(scc);
+ break;
+
+ case CLK_EXTERNAL:
+ wr(scc, R11, (scc->brand & BAYCOM)? RCTRxCP|TCRTxCP : RCRTxCP|TCTRxCP);
+ OutReg(scc->ctrl, R14, DISDPLL);
+ break;
+
+ }
+
+ set_speed(scc); /* set baudrate */
+
+ if(scc->enhanced)
+ {
+ or(scc,R15,SHDLCE|FIFOE); /* enable FIFO, SDLC/HDLC Enhancements (From now R7 is R7') */
+ wr(scc,R7,AUTOEOM);
+ }
+
+ if((InReg(scc->ctrl,R0)) & DCD) /* DCD is now ON */
+ {
+ if (scc->modem.clocksrc != CLK_EXTERNAL)
+ or(scc,R14, SEARCH);
+
+ or(scc,R3,ENT_HM|RxENABLE); /* enable the receiver, hunt mode */
+ }
+
+ /* enable ABORT, DCD & SYNC/HUNT interrupts */
+
+ wr(scc,R15, BRKIE|TxUIE|DCDIE);
+ if (scc->kiss.softdcd)
+ or(scc,R15, SYNCIE);
+
+ Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
+ Outb(scc->ctrl,RES_EXT_INT); /* must be done twice */
+
+ or(scc,R1,INT_ALL_Rx|TxINT_ENAB|EXT_INT_ENAB); /* enable interrupts */
+
+ scc->status = InReg(scc->ctrl,R0); /* read initial status */
+
+ or(scc,R9,MIE); /* master interrupt enable */
+
+ scc_init_timer(scc);
+
+ enable_irq(scc->irq);
+}
+
+
+
+
+/* ******************************************************************** */
+/* * SCC timer functions * */
+/* ******************************************************************** */
+
+
+/* ----> scc_key_trx sets the time constant for the baudrate
+ generator and keys the transmitter <---- */
+
+static void
+scc_key_trx(struct scc_channel *scc, char tx)
+{
+ unsigned int time_const;
+
+ if (scc->brand & PRIMUS)
+ Outb(scc->ctrl + 4, scc->option | (tx? 0x80 : 0));
+
+ if (scc->modem.speed < 300)
+ scc->modem.speed = 1200;
+
+ time_const = (unsigned) (scc->clock / (scc->modem.speed * (tx? 2:64))) - 2;
+
+ disable_irq(scc->irq);
+
+ if (tx)
+ {
+ or(scc, R1, TxINT_ENAB); /* t_maxkeyup may have reset these */
+ or(scc, R15, TxUIE);
+ }
+
+ if (scc->modem.clocksrc == CLK_DPLL)
+ { /* force simplex operation */
+ if (tx)
+ {
+ cl(scc, R3, RxENABLE|ENT_HM); /* switch off receiver */
+ cl(scc, R15, DCDIE); /* No DCD changes, please */
+ set_brg(scc, time_const); /* reprogram baudrate generator */
+
+ /* DPLL -> Rx clk, BRG -> Tx CLK, TRxC mode output, TRxC = BRG */
+ wr(scc, R11, RCDPLL|TCBR|TRxCOI|TRxCBR);
+
+ or(scc,R5,RTS|TxENAB); /* set the RTS line and enable TX */
+ } else {
+ cl(scc,R5,RTS|TxENAB);
+
+ set_brg(scc, time_const); /* reprogram baudrate generator */
+
+ /* DPLL -> Rx clk, DPLL -> Tx CLK, TRxC mode output, TRxC = DPLL */
+ wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP);
+
+ or(scc,R3,RxENABLE|ENT_HM);
+ or(scc,R15, DCDIE);
+ }
+ } else {
+ if (tx)
+ {
+ if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
+ {
+ cl(scc, R3, RxENABLE);
+ cl(scc, R15, DCDIE);
+ }
+
+
+ or(scc,R5,RTS|TxENAB); /* enable tx */
+ } else {
+ cl(scc,R5,RTS|TxENAB); /* disable tx */
+
+ if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
+ {
+ or(scc, R3, RxENABLE|ENT_HM);
+ or(scc, R15, DCDIE);
+ }
+ }
+ }
+
+ enable_irq(scc->irq);
+}
+
+
+/* ----> SCC timer interrupt handler and friends. <---- */
+
+static void
+scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when)
+{
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+
+ if (scc->tx_t.next)
+ del_timer(&scc->tx_t);
+
+ if (when == 0)
+ {
+ handler((unsigned long) scc);
+ } else
+ if (when != TIMER_OFF)
+ {
+ scc->tx_t.data = (unsigned long) scc;
+ scc->tx_t.function = handler;
+ scc->tx_t.expires = jiffies + (when*HZ)/100;
+ add_timer(&scc->tx_t);
+ }
+
+ restore_flags(flags);
+}
+
+static void
+scc_start_defer(struct scc_channel *scc)
+{
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+
+ if (scc->tx_wdog.next)
+ del_timer(&scc->tx_wdog);
+
+ if (scc->kiss.maxdefer != 0 && scc->kiss.maxdefer != TIMER_OFF)
+ {
+ scc->tx_wdog.data = (unsigned long) scc;
+ scc->tx_wdog.function = t_busy;
+ scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxdefer;
+ add_timer(&scc->tx_wdog);
+ }
+ restore_flags(flags);
+}
+
+static void
+scc_start_maxkeyup(struct scc_channel *scc)
+{
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+
+ if (scc->tx_wdog.next)
+ del_timer(&scc->tx_wdog);
+
+ if (scc->kiss.maxkeyup != 0 && scc->kiss.maxkeyup != TIMER_OFF)
+ {
+ scc->tx_wdog.data = (unsigned long) scc;
+ scc->tx_wdog.function = t_maxkeyup;
+ scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxkeyup;
+ add_timer(&scc->tx_wdog);
+ }
+
+ restore_flags(flags);
+}
+
+/*
+ * This is called from scc_txint() when there are no more frames to send.
+ * Not exactly a timer function, but it is a close friend of the family...
+ */
+
+static void
+scc_tx_done(struct scc_channel *scc)
+{
+ /*
+ * trx remains keyed in fulldup mode 2 until t_idle expires.
+ */
+
+ switch (scc->kiss.fulldup)
+ {
+ case KISS_DUPLEX_LINK:
+ scc->stat.tx_state = TXS_IDLE2;
+ if (scc->kiss.idletime != TIMER_OFF)
+ scc_start_tx_timer(scc, t_idle, scc->kiss.idletime*100);
+ break;
+ case KISS_DUPLEX_OPTIMA:
+ scc_notify(scc, HWEV_ALL_SENT);
+ break;
+ default:
+ scc->stat.tx_state = TXS_BUSY;
+ scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
+ }
+
+ scc_unlock_dev(scc);
+}
+
+
+static unsigned char Rand = 17;
+
+static __inline__ int
+is_grouped(struct scc_channel *scc)
+{
+ int k;
+ struct scc_channel *scc2;
+ unsigned char grp1, grp2;
+
+ grp1 = scc->kiss.group;
+
+ for (k = 0; k < (Nchips * 2); k++)
+ {
+ scc2 = &SCC_Info[k];
+ grp2 = scc2->kiss.group;
+
+ if (scc2 == scc || !(scc2->dev && grp2))
+ continue;
+
+ if ((grp1 & 0x3f) == (grp2 & 0x3f))
+ {
+ if ( (grp1 & TXGROUP) && (scc2->wreg[R5] & RTS) )
+ return 1;
+
+ if ( (grp1 & RXGROUP) && (scc2->status & DCD) )
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/* DWAIT and SLOTTIME expired
+ *
+ * fulldup == 0: DCD is active or Rand > P-persistence: start t_busy timer
+ * else key trx and start txdelay
+ * fulldup == 1: key trx and start txdelay
+ * fulldup == 2: mintime expired, reset status or key trx and start txdelay
+ */
+
+static void
+t_dwait(unsigned long channel)
+{
+ struct scc_channel *scc = (struct scc_channel *) channel;
+
+ if (scc->stat.tx_state == TXS_WAIT) /* maxkeyup or idle timeout */
+ {
+ if (scc->tx_next_buff == NULL) /* nothing to send */
+ {
+ scc->stat.tx_state = TXS_IDLE;
+ scc_unlock_dev(scc); /* t_maxkeyup locked it. */
+ return;
+ }
+
+ scc->stat.tx_state = TXS_BUSY;
+ }
+
+ if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
+ {
+ Rand = Rand * 17 + 31;
+
+ if ( (scc->kiss.softdcd? !(scc->status & SYNC_HUNT):(scc->status & DCD)) || (scc->kiss.persist) < Rand || (scc->kiss.group && is_grouped(scc)) )
+ {
+ scc_start_defer(scc);
+ scc_start_tx_timer(scc, t_dwait, scc->kiss.slottime);
+ return ;
+ }
+ }
+
+ if ( !(scc->wreg[R5] & RTS) )
+ {
+ scc_key_trx(scc, TX_ON);
+ scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
+ } else {
+ scc_start_tx_timer(scc, t_txdelay, 0);
+ }
+}
+
+
+/* TXDELAY expired
+ *
+ * kick transmission by a fake scc_txint(scc), start 'maxkeyup' watchdog.
+ */
+
+static void
+t_txdelay(unsigned long channel)
+{
+ struct scc_channel *scc = (struct scc_channel *) channel;
+
+ scc_start_maxkeyup(scc);
+
+ if (scc->tx_buff == NULL)
+ {
+ disable_irq(scc->irq);
+ scc_txint(scc);
+ enable_irq(scc->irq);
+ }
+}
+
+
+/* TAILTIME expired
+ *
+ * switch off transmitter. If we were stopped by Maxkeyup restart
+ * transmission after 'mintime' seconds
+ */
+
+static void
+t_tail(unsigned long channel)
+{
+ struct scc_channel *scc = (struct scc_channel *) channel;
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+
+ if (scc->tx_wdog.next)
+ del_timer(&scc->tx_wdog);
+
+ scc_key_trx(scc, TX_OFF);
+
+ restore_flags(flags);
+
+ if (scc->stat.tx_state == TXS_TIMEOUT) /* we had a timeout? */
+ {
+ scc->stat.tx_state = TXS_WAIT;
+
+ if (scc->kiss.mintime != TIMER_OFF) /* try it again */
+ scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100);
+ else
+ scc_start_tx_timer(scc, t_dwait, 0);
+ return;
+ }
+
+ scc->stat.tx_state = TXS_IDLE;
+ scc_unlock_dev(scc);
+}
+
+
+/* BUSY timeout
+ *
+ * throw away send buffers if DCD remains active too long.
+ */
+
+static void
+t_busy(unsigned long channel)
+{
+ struct scc_channel *scc = (struct scc_channel *) channel;
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+
+ if (scc->tx_t.next)
+ del_timer(&scc->tx_t);
+
+ restore_flags(flags);
+
+ scc_lock_dev(scc);
+
+ scc_discard_buffers(scc);
+
+ scc->stat.txerrs++;
+ scc->stat.tx_state = TXS_IDLE;
+
+ scc_unlock_dev(scc);
+}
+
+/* MAXKEYUP timeout
+ *
+ * this is our watchdog.
+ */
+
+static void
+t_maxkeyup(unsigned long channel)
+{
+ struct scc_channel *scc = (struct scc_channel *) channel;
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+
+ /*
+ * let things settle down before we start to
+ * accept new data.
+ */
+
+ scc_lock_dev(scc);
+ scc_discard_buffers(scc);
+
+ if (scc->tx_t.next)
+ del_timer(&scc->tx_t);
+
+ cl(scc, R1, TxINT_ENAB); /* force an ABORT, but don't */
+ cl(scc, R15, TxUIE); /* count it. */
+ OutReg(scc->ctrl, R0, RES_Tx_P);
+
+ restore_flags(flags);
+
+ scc->stat.txerrs++;
+ scc->stat.tx_state = TXS_TIMEOUT;
+ scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
+}
+
+/* IDLE timeout
+ *
+ * in fulldup mode 2 it keys down the transmitter after 'idle' seconds
+ * of inactivity. We will not restart transmission before 'mintime'
+ * expires.
+ */
+
+static void
+t_idle(unsigned long channel)
+{
+ struct scc_channel *scc = (struct scc_channel *) channel;
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+
+ if (scc->tx_wdog.next)
+ del_timer(&scc->tx_wdog);
+
+ restore_flags(flags);
+
+ scc_key_trx(scc, TX_OFF);
+
+ if (scc->kiss.mintime != TIMER_OFF)
+ scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100);
+ scc->stat.tx_state = TXS_WAIT;
+}
+
+static void
+scc_init_timer(struct scc_channel *scc)
+{
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+
+ scc->stat.tx_state = TXS_IDLE;
+
+ restore_flags(flags);
+}
+
+
+/* ******************************************************************** */
+/* * Set/get L1 parameters * */
+/* ******************************************************************** */
+
+
+/*
+ * this will set the "hardware" parameters through KISS commands or ioctl()
+ */
+
+#define CAST(x) (unsigned long)(x)
+
+static unsigned int
+scc_set_param(struct scc_channel *scc, unsigned int cmd, unsigned int arg)
+{
+ int dcd;
+
+ switch (cmd)
+ {
+ case PARAM_TXDELAY: scc->kiss.txdelay=arg; break;
+ case PARAM_PERSIST: scc->kiss.persist=arg; break;
+ case PARAM_SLOTTIME: scc->kiss.slottime=arg; break;
+ case PARAM_TXTAIL: scc->kiss.tailtime=arg; break;
+ case PARAM_FULLDUP: scc->kiss.fulldup=arg; break;
+ case PARAM_DTR: break; /* does someone need this? */
+ case PARAM_GROUP: scc->kiss.group=arg; break;
+ case PARAM_IDLE: scc->kiss.idletime=arg; break;
+ case PARAM_MIN: scc->kiss.mintime=arg; break;
+ case PARAM_MAXKEY: scc->kiss.maxkeyup=arg; break;
+ case PARAM_WAIT: scc->kiss.waittime=arg; break;
+ case PARAM_MAXDEFER: scc->kiss.maxdefer=arg; break;
+ case PARAM_TX: scc->kiss.tx_inhibit=arg; break;
+
+ case PARAM_SOFTDCD:
+ scc->kiss.softdcd=arg;
+ if (arg)
+ or(scc, R15, SYNCIE);
+ else
+ cl(scc, R15, SYNCIE);
+ break;
+
+ case PARAM_SPEED:
+ if (arg < 256)
+ scc->modem.speed=arg*100;
+ else
+ scc->modem.speed=arg;
+
+ if (scc->stat.tx_state == 0) /* only switch baudrate on rx... ;-) */
+ set_speed(scc);
+ break;
+
+ case PARAM_RTS:
+ if ( !(scc->wreg[R5] & RTS) )
+ {
+ if (arg != TX_OFF)
+ scc_key_trx(scc, TX_ON);
+ scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
+ } else {
+ if (arg == TX_OFF)
+ {
+ scc->stat.tx_state = TXS_BUSY;
+ scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
+ }
+ }
+ break;
+
+ case PARAM_HWEVENT:
+ dcd = (scc->kiss.softdcd? !(scc->status & SYNC_HUNT):(scc->status & DCD));
+ scc_notify(scc, dcd? HWEV_DCD_ON:HWEV_DCD_OFF);
+ break;
+
+ default: return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+
+static unsigned long
+scc_get_param(struct scc_channel *scc, unsigned int cmd)
+{
+ switch (cmd)
+ {
+ case PARAM_TXDELAY: return CAST(scc->kiss.txdelay);
+ case PARAM_PERSIST: return CAST(scc->kiss.persist);
+ case PARAM_SLOTTIME: return CAST(scc->kiss.slottime);
+ case PARAM_TXTAIL: return CAST(scc->kiss.tailtime);
+ case PARAM_FULLDUP: return CAST(scc->kiss.fulldup);
+ case PARAM_SOFTDCD: return CAST(scc->kiss.softdcd);
+ case PARAM_DTR: return CAST((scc->wreg[R5] & DTR)? 1:0);
+ case PARAM_RTS: return CAST((scc->wreg[R5] & RTS)? 1:0);
+ case PARAM_SPEED: return CAST(scc->modem.speed);
+ case PARAM_GROUP: return CAST(scc->kiss.group);
+ case PARAM_IDLE: return CAST(scc->kiss.idletime);
+ case PARAM_MIN: return CAST(scc->kiss.mintime);
+ case PARAM_MAXKEY: return CAST(scc->kiss.maxkeyup);
+ case PARAM_WAIT: return CAST(scc->kiss.waittime);
+ case PARAM_MAXDEFER: return CAST(scc->kiss.maxdefer);
+ case PARAM_TX: return CAST(scc->kiss.tx_inhibit);
+ default: return NO_SUCH_PARAM;
+ }
+
+}
+
+#undef CAST
+#undef SVAL
+
+/* ******************************************************************* */
+/* * Init channel structures, special HW, etc... * */
+/* ******************************************************************* */
+
+/*
+ * Reset the Z8530s and setup special hardware
+ */
+
+static void
+z8530_init(void)
+{
+ struct scc_channel *scc;
+ int chip, k;
+ unsigned long flags;
+ char *flag;
+
+
+ printk(KERN_INFO "Init Z8530 driver: %u channels, IRQ", Nchips*2);
+
+ flag=" ";
+ for (k = 0; k < 16; k++)
+ if (Ivec[k].used)
+ {
+ printk("%s%d", flag, k);
+ flag=",";
+ }
+ printk("\n");
+
+
+ /* reset and pre-init all chips in the system */
+ for (chip = 0; chip < Nchips; chip++)
+ {
+ scc=&SCC_Info[2*chip];
+ if (!scc->ctrl) continue;
+
+ /* Special SCC cards */
+
+ if(scc->brand & EAGLE) /* this is an EAGLE card */
+ Outb(scc->special,0x08); /* enable interrupt on the board */
+
+ if(scc->brand & (PC100 | PRIMUS)) /* this is a PC100/PRIMUS card */
+ Outb(scc->special,scc->option); /* set the MODEM mode (0x22) */
+
+
+ /* Reset and pre-init Z8530 */
+
+ save_flags(flags);
+ cli();
+
+ Outb(scc->ctrl, 0);
+ OutReg(scc->ctrl,R9,FHWRES); /* force hardware reset */
+ udelay(100); /* give it 'a bit' more time than required */
+ wr(scc, R2, chip*16); /* interrupt vector */
+ wr(scc, R9, VIS); /* vector includes status */
+
+ restore_flags(flags);
+ }
+
+
+ Driver_Initialized = 1;
+}
+
+/*
+ * Allocate device structure, err, instance, and register driver
+ */
+
+static int
+scc_net_setup(struct scc_channel *scc, unsigned char *name)
+{
+ unsigned char *buf;
+ struct device *dev;
+
+ if (dev_get(name) != NULL)
+ {
+ printk(KERN_INFO "Z8530drv: device %s already exists.\n", name);
+ return -EEXIST;
+ }
+
+ if ((scc->dev = (struct device *) kmalloc(sizeof(struct device), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+
+ dev = scc->dev;
+ memset(dev, 0, sizeof(struct device));
+
+ buf = (unsigned char *) kmalloc(10, GFP_KERNEL);
+ strcpy(buf, name);
+
+ dev->priv = (void *) scc;
+ dev->name = buf;
+ dev->init = scc_net_init;
+
+ if (register_netdev(dev) != 0)
+ {
+ kfree(dev);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+
+
+/* ******************************************************************** */
+/* * Network driver methods * */
+/* ******************************************************************** */
+
+static unsigned char ax25_bcast[AX25_ADDR_LEN] =
+{'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1};
+static unsigned char ax25_nocall[AX25_ADDR_LEN] =
+{'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1};
+
+/* ----> Initialize device <----- */
+
+static int
+scc_net_init(struct device *dev)
+{
+ int k;
+
+ for (k=0; k < DEV_NUMBUFFS; k++)
+ skb_queue_head_init(&dev->buffs[k]);
+ dev->tx_queue_len = 16; /* should be enough... */
+
+ dev->open = scc_net_open;
+ dev->stop = scc_net_close;
+
+ dev->hard_start_xmit = scc_net_tx;
+ dev->hard_header = scc_net_header;
+ dev->rebuild_header = scc_net_rebuild_header;
+ dev->set_mac_address = scc_net_set_mac_address;
+ dev->get_stats = scc_net_get_stats;
+ dev->do_ioctl = scc_net_ioctl;
+
+ memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
+ memcpy(dev->dev_addr, ax25_nocall, AX25_ADDR_LEN);
+
+ dev->flags = 0;
+ dev->family = AF_INET;
+ dev->pa_addr = 0;
+ dev->pa_brdaddr = 0;
+ dev->pa_mask = 0;
+ dev->pa_alen = 4;
+
+ dev->type = ARPHRD_AX25;
+ dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
+ dev->mtu = AX25_DEF_PACLEN;
+ dev->addr_len = AX25_ADDR_LEN;
+
+ return 0;
+}
+
+/* ----> open network device <---- */
+
+static int
+scc_net_open(struct device *dev)
+{
+ struct scc_channel *scc = (struct scc_channel *) dev->priv;
+
+ if (scc == NULL || scc->magic != SCC_MAGIC)
+ return -ENODEV;
+
+ if (!scc->init)
+ return -EINVAL;
+
+ MOD_INC_USE_COUNT;
+
+ scc->tx_buff = scc->tx_next_buff = NULL;
+
+ init_channel(scc);
+
+ dev->tbusy = 0;
+ dev->start = 1;
+
+ return 0;
+}
+
+/* ----> close network device <---- */
+
+static int
+scc_net_close(struct device *dev)
+{
+ struct scc_channel *scc = (struct scc_channel *) dev->priv;
+ unsigned long flags;
+
+ if (scc == NULL || scc->magic != SCC_MAGIC)
+ return -ENODEV;
+
+ MOD_DEC_USE_COUNT;
+
+ save_flags(flags);
+ cli();
+
+ Outb(scc->ctrl,0); /* Make sure pointer is written */
+ wr(scc,R1,0); /* disable interrupts */
+ wr(scc,R3,0);
+
+ del_timer(&scc->tx_t);
+ del_timer(&scc->tx_wdog);
+
+ restore_flags(flags);
+
+ scc_discard_buffers(scc);
+
+ dev->tbusy = 1;
+ dev->start = 0;
+
+ return 0;
+}
+
+/* ----> receive frame, called from scc_rxint() <---- */
+
+static void
+scc_net_rx(struct scc_channel *scc, struct sk_buff *skb)
+{
+ if (skb->len == 0)
+ {
+ kfree_skb(skb, FREE_READ);
+ return;
+ }
+
+ scc->dev_stat.rx_packets++;
+
+ skb->dev = scc->dev;
+ skb->protocol = htons(ETH_P_AX25);
+ skb->mac.raw = skb->data;
+
+ netif_rx(skb);
+ return;
+}
+
+/* ----> transmit frame <---- */
+
+static int
+scc_net_tx(struct sk_buff *skb, struct device *dev)
+{
+ struct scc_channel *scc = (struct scc_channel *) dev->priv;
+ unsigned long flags;
+ char kisscmd;
+ long ticks;
+
+ if (dev->tbusy)
+ {
+ ticks = (signed) (jiffies - dev->trans_start);
+
+ if (ticks < scc->kiss.maxdefer*HZ || scc == NULL)
+ return 1;
+
+ /*
+ * Throw away transmission queue.
+ */
+
+ if (scc->tx_wdog.next)
+ del_timer(&scc->tx_wdog);
+ t_busy((unsigned long) scc);
+ dev->trans_start = jiffies;
+ }
+
+ if (skb == NULL)
+ {
+ dev_tint(dev);
+ return 0;
+ }
+
+ if (scc == NULL || scc->magic != SCC_MAGIC)
+ {
+ dev_kfree_skb(skb, FREE_WRITE);
+ return 0;
+ }
+
+ if (skb->len > scc->stat.bufsize || skb->len < 2)
+ {
+ scc->dev_stat.tx_dropped++; /* bogus frame */
+ dev_kfree_skb(skb, FREE_WRITE);
+ return 0;
+ }
+
+ scc->dev_stat.tx_packets++;
+ scc->stat.txframes++;
+
+ kisscmd = *skb->data & 0x1f;
+ skb_pull(skb, 1);
+
+ if (kisscmd)
+ {
+ scc_set_param(scc, kisscmd, *skb->data);
+ dev_kfree_skb(skb, FREE_WRITE);
+ return 0;
+ }
+
+ save_flags(flags);
+ cli();
+
+ scc_lock_dev(scc);
+
+ if (scc->tx_next_buff != NULL)
+ {
+ printk(KERN_ERR "z8530drv: race condition, discarding frame\n");
+ dev_kfree_skb(skb, FREE_WRITE);
+ scc_lock_dev(scc);
+ restore_flags(flags);
+ return 0;
+ }
+
+ dev->trans_start = jiffies;
+ scc->tx_next_buff = skb;
+
+ /*
+ * Start transmission if the trx state is idle or
+ * t_idle hasn't expired yet. Use dwait/persistance/slottime
+ * algorithm for normal halfduplex operation.
+ */
+
+ if(scc->stat.tx_state == TXS_IDLE || scc->stat.tx_state == TXS_IDLE2)
+ {
+ scc->stat.tx_state = TXS_BUSY;
+ if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
+ scc_start_tx_timer(scc, t_dwait, scc->kiss.waittime);
+ else
+ scc_start_tx_timer(scc, t_dwait, 0);
+ }
+
+ restore_flags(flags);
+
+ return 0;
+}
+
+/* ----> ioctl functions <---- */
+
+/*
+ * SIOCSCCCFG - configure driver arg: (struct scc_hw_config *) arg
+ * SIOCSCCINI - initialize driver arg: ---
+ * SIOCSCCCHANINI - initialize channel arg: (struct scc_modem *) arg
+ * SIOCSCCSMEM - set memory arg: (struct scc_mem_config *) arg
+ * SIOCSCCGKISS - get level 1 parameter arg: (struct scc_kiss_cmd *) arg
+ * SIOCSCCSKISS - set level 1 parameter arg: (struct scc_kiss_cmd *) arg
+ * SIOCSCCGSTAT - get driver status arg: (struct scc_stat *) arg
+ */
+
+static int
+scc_net_ioctl(struct device *dev, struct ifreq *ifr, int cmd)
+{
+ struct scc_kiss_cmd kiss_cmd;
+ struct scc_mem_config memcfg;
+ struct scc_hw_config hwcfg;
+ unsigned char device_name[10];
+ struct scc_channel *scc;
+ int chan;
+ void *arg;
+
+ scc = (struct scc_channel *) dev->priv;
+ if (scc == NULL || scc->magic != SCC_MAGIC)
+ return -EINVAL;
+
+ arg = (void *) ifr->ifr_data;
+
+ if (!Driver_Initialized)
+ {
+ if (cmd == SIOCSCCCFG)
+ {
+ int found = 1;
+
+ if (!suser()) return -EPERM;
+ if (!arg) return -EFAULT;
+
+ if (Nchips >= MAXSCC)
+ return -EINVAL;
+
+ if (copy_from_user(&hwcfg, arg, sizeof(hwcfg)))
+ return -EFAULT;
+
+ if (hwcfg.irq == 2) hwcfg.irq = 9;
+
+ if (!Ivec[hwcfg.irq].used && hwcfg.irq)
+ {
+ if (request_irq(hwcfg.irq, scc_isr, SA_INTERRUPT, "AX.25 SCC", NULL))
+ printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq);
+ else
+ Ivec[hwcfg.irq].used = 1;
+ }
+
+ if (hwcfg.vector_latch)
+ Vector_Latch = hwcfg.vector_latch;
+
+ if (hwcfg.clock == 0)
+ hwcfg.clock = DEFAULT_CLOCK;
+
+#ifndef DONT_CHECK
+ disable_irq(hwcfg.irq);
+
+ check_region(scc->ctrl, 1);
+ Outb(hwcfg.ctrl_a, 0);
+ udelay(5);
+ OutReg(hwcfg.ctrl_a,R13,0x55); /* is this chip really there? */
+ udelay(5);
+
+ if (InReg(hwcfg.ctrl_a,R13) != 0x55)
+ found = 0;
+
+ enable_irq(hwcfg.irq);
+#endif
+
+ if (found)
+ {
+ SCC_Info[2*Nchips ].ctrl = hwcfg.ctrl_a;
+ SCC_Info[2*Nchips ].data = hwcfg.data_a;
+ SCC_Info[2*Nchips ].irq = hwcfg.irq;
+ SCC_Info[2*Nchips+1].ctrl = hwcfg.ctrl_b;
+ SCC_Info[2*Nchips+1].data = hwcfg.data_b;
+ SCC_Info[2*Nchips+1].irq = hwcfg.irq;
+
+ SCC_ctrl[Nchips].chan_A = hwcfg.ctrl_a;
+ SCC_ctrl[Nchips].chan_B = hwcfg.ctrl_b;
+ SCC_ctrl[Nchips].irq = hwcfg.irq;
+ }
+
+
+ for (chan = 0; chan < 2; chan++)
+ {
+ sprintf(device_name, "%s%i", SCC_DriverName, 2*Nchips+chan);
+
+ SCC_Info[2*Nchips+chan].special = hwcfg.special;
+ SCC_Info[2*Nchips+chan].clock = hwcfg.clock;
+ SCC_Info[2*Nchips+chan].brand = hwcfg.brand;
+ SCC_Info[2*Nchips+chan].option = hwcfg.option;
+ SCC_Info[2*Nchips+chan].enhanced = hwcfg.escc;
+
+#ifdef DONT_CHECK
+ printk(KERN_INFO "%s: data port = 0x%3.3x control port = 0x%3.3x\n",
+ device_name,
+ SCC_Info[2*Nchips+chan].data,
+ SCC_Info[2*Nchips+chan].ctrl);
+
+#else
+ printk(KERN_INFO "%s: data port = 0x%3.3lx control port = 0x%3.3lx -- %s\n",
+ device_name,
+ chan? hwcfg.data_b : hwcfg.data_a,
+ chan? hwcfg.ctrl_b : hwcfg.ctrl_a,
+ found? "found" : "missing");
+#endif
+
+ if (found)
+ {
+ request_region(SCC_Info[2*Nchips+chan].ctrl, 1, "scc ctrl");
+ request_region(SCC_Info[2*Nchips+chan].data, 1, "scc data");
+ if (Nchips+chan != 0)
+ scc_net_setup(&SCC_Info[2*Nchips+chan], device_name);
+ }
+ }
+
+ if (found) Nchips++;
+
+ return 0;
+ }
+
+ if (cmd == SIOCSCCINI)
+ {
+ if (!suser())
+ return -EPERM;
+
+ if (Nchips == 0)
+ return -EINVAL;
+
+ z8530_init();
+ return 0;
+ }
+
+ return -EINVAL; /* confuse the user */
+ }
+
+ if (!scc->init)
+ {
+ if (cmd == SIOCSCCCHANINI)
+ {
+ if (!suser()) return -EPERM;
+ if (!arg) return -EINVAL;
+
+ scc->stat.bufsize = BUFSIZE;
+
+ if (copy_from_user(&scc->modem, arg, sizeof(struct scc_modem)))
+ return -EINVAL;
+
+ /* default KISS Params */
+
+ if (scc->modem.speed < 4800)
+ {
+ scc->kiss.txdelay = 36; /* 360 ms */
+ scc->kiss.persist = 42; /* 25% persistence */ /* was 25 */
+ scc->kiss.slottime = 16; /* 160 ms */
+ scc->kiss.tailtime = 4; /* minimal reasonable value */
+ scc->kiss.fulldup = 0; /* CSMA */
+ scc->kiss.waittime = 50; /* 500 ms */
+ scc->kiss.maxkeyup = 10; /* 10 s */
+ scc->kiss.mintime = 3; /* 3 s */
+ scc->kiss.idletime = 30; /* 30 s */
+ scc->kiss.maxdefer = 120; /* 2 min */
+ scc->kiss.softdcd = 0; /* hardware dcd */
+ } else {
+ scc->kiss.txdelay = 10; /* 100 ms */
+ scc->kiss.persist = 64; /* 25% persistence */ /* was 25 */
+ scc->kiss.slottime = 8; /* 160 ms */
+ scc->kiss.tailtime = 1; /* minimal reasonable value */
+ scc->kiss.fulldup = 0; /* CSMA */
+ scc->kiss.waittime = 50; /* 500 ms */
+ scc->kiss.maxkeyup = 7; /* 7 s */
+ scc->kiss.mintime = 3; /* 3 s */
+ scc->kiss.idletime = 30; /* 30 s */
+ scc->kiss.maxdefer = 120; /* 2 min */
+ scc->kiss.softdcd = 0; /* hardware dcd */
+ }
+
+ scc->tx_buff = scc->tx_next_buff = NULL;
+ scc->init = 1;
+
+ return 0;
+ }
+
+ return -EINVAL;
+ }
+
+ switch(cmd)
+ {
+ case SIOCSCCRESERVED:
+ return -ENOIOCTLCMD;
+
+ case SIOCSCCSMEM:
+ if (!suser()) return -EPERM;
+ if (!arg || copy_from_user(&memcfg, arg, sizeof(memcfg)))
+ return -EINVAL;
+ scc->stat.bufsize = memcfg.bufsize;
+ return 0;
+
+ case SIOCSCCGSTAT:
+ if (!arg || copy_to_user(arg, &scc->stat, sizeof(scc->stat)))
+ return -EINVAL;
+ return 0;
+
+ case SIOCSCCGKISS:
+ if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd)))
+ return -EINVAL;
+ kiss_cmd.param = scc_get_param(scc, kiss_cmd.command);
+ if (copy_to_user(arg, &kiss_cmd, sizeof(kiss_cmd)))
+ return -EINVAL;
+ return 0;
+
+ case SIOCSCCSKISS:
+ if (!suser()) return -EPERM;
+ if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd)))
+ return -EINVAL;
+ return scc_set_param(scc, kiss_cmd.command, kiss_cmd.param);
+
+ default:
+ return -ENOIOCTLCMD;
+
+ }
+
+ return -EINVAL;
+}
+
+/* ----> set interface callsign <---- */
+
+static int
+scc_net_set_mac_address(struct device *dev, void *addr)
+{
+ struct sockaddr *sa = (struct sockaddr *) addr;
+ memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
+ return 0;
+}
+
+/* ----> rebuild header <---- */
+
+static int
+scc_net_rebuild_header(void *buff, struct device *dev, unsigned long raddr, struct sk_buff *skb)
+{
+ return ax25_rebuild_header(buff, dev, raddr, skb);
+}
+
+/* ----> "hard" header <---- */
+
+static int
+scc_net_header(struct sk_buff *skb, struct device *dev, unsigned short type,
+ void *daddr, void *saddr, unsigned len)
+{
+ return ax25_encapsulate(skb, dev, type, daddr, saddr, len);
+}
+
+/* ----> get statistics <---- */
+
+static struct enet_statistics *
+scc_net_get_stats(struct device *dev)
+{
+ struct scc_channel *scc = (struct scc_channel *) dev->priv;
+
+ if (scc == NULL || scc->magic != SCC_MAGIC)
+ return NULL;
+
+ scc->dev_stat.rx_errors = scc->stat.rxerrs + scc->stat.rx_over;
+ scc->dev_stat.tx_errors = scc->stat.txerrs + scc->stat.tx_under;
+ scc->dev_stat.rx_fifo_errors = scc->stat.rx_over;
+ scc->dev_stat.tx_fifo_errors = scc->stat.tx_under;
+
+ return &scc->dev_stat;
+}
+
+/* ******************************************************************** */
+/* * dump statistics to /proc/net/z8530drv * */
+/* ******************************************************************** */
+
+
+static int
+scc_net_get_info(char *buffer, char **start, off_t offset, int length, int dummy)
+{
+ struct scc_channel *scc;
+ struct scc_kiss *kiss;
+ struct scc_stat *stat;
+ int len = 0;
+ off_t pos = 0;
+ off_t begin = 0;
+ int k;
+
+ len += sprintf(buffer, "z8530drv-"VERSION"\n");
+
+ if (!Driver_Initialized)
+ {
+ len += sprintf(buffer+len, "not initialized\n");
+ goto done;
+ }
+
+ if (!Nchips)
+ {
+ len += sprintf(buffer+len, "chips missing\n");
+ goto done;
+ }
+
+ for (k = 0; k < Nchips*2; k++)
+ {
+ scc = &SCC_Info[k];
+ stat = &scc->stat;
+ kiss = &scc->kiss;
+
+ if (!scc->init)
+ continue;
+
+ /* dev data ctrl irq clock brand enh vector special option
+ * baud nrz clocksrc softdcd bufsize
+ * rxints txints exints spints
+ * rcvd rxerrs over / xmit txerrs under / nospace bufsize
+ * txd pers slot tail ful wait min maxk idl defr txof grp
+ * W ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
+ * R ## ## XX ## ## ## ## ## XX ## ## ## ## ## ## ##
+ */
+
+ len += sprintf(buffer+len, "%s\t%3.3lx %3.3lx %d %lu %2.2x %d %3.3lx %3.3lx %d\n",
+ scc->dev->name,
+ scc->data, scc->ctrl, scc->irq, scc->clock, scc->brand,
+ scc->enhanced, Vector_Latch, scc->special,
+ scc->option);
+ len += sprintf(buffer+len, "\t%lu %d %d %d %d\n",
+ scc->modem.speed, scc->modem.nrz,
+ scc->modem.clocksrc, kiss->softdcd,
+ stat->bufsize);
+ len += sprintf(buffer+len, "\t%lu %lu %lu %lu\n",
+ stat->rxints, stat->txints, stat->exints, stat->spints);
+ len += sprintf(buffer+len, "\t%lu %lu %d / %lu %lu %d / %d %d\n",
+ stat->rxframes, stat->rxerrs, stat->rx_over,
+ stat->txframes, stat->txerrs, stat->tx_under,
+ stat->nospace, stat->tx_state);
+
+#define K(x) kiss->x
+ len += sprintf(buffer+len, "\t%d %d %d %d %d %d %d %d %d %d %d %d\n",
+ K(txdelay), K(persist), K(slottime), K(tailtime),
+ K(fulldup), K(waittime), K(mintime), K(maxkeyup),
+ K(idletime), K(maxdefer), K(tx_inhibit), K(group));
+#undef K
+#ifdef SCC_DEBUG
+ {
+ int reg;
+
+ len += sprintf(buffer+len, "\tW ");
+ for (reg = 0; reg < 16; reg++)
+ len += sprintf(buffer+len, "%2.2x ", scc->wreg[reg]);
+ len += sprintf(buffer+len, "\n");
+
+ len += sprintf(buffer+len, "\tR %2.2x %2.2x XX ", InReg(scc->ctrl,R0), InReg(scc->ctrl,R1));
+ for (reg = 3; reg < 8; reg++)
+ len += sprintf(buffer+len, "%2.2x ", InReg(scc->ctrl, reg));
+ len += sprintf(buffer+len, "XX ");
+ for (reg = 9; reg < 16; reg++)
+ len += sprintf(buffer+len, "%2.2x ", InReg(scc->ctrl, reg));
+ len += sprintf(buffer+len, "\n");
+ }
+#endif
+ len += sprintf(buffer+len, "\n");
+
+ pos = begin + len;
+
+ if (pos < offset) {
+ len = 0;
+ begin = pos;
+ }
+
+ if (pos > offset + length)
+ break;
+ }
+
+done:
+
+ *start = buffer + (offset - begin);
+ len -= (offset - begin);
+
+ if (len > length) len = length;
+
+ return len;
+}
+
+#ifdef CONFIG_PROC_FS
+struct proc_dir_entry scc_proc_dir_entry =
+{
+ PROC_NET_Z8530, 8, "z8530drv", S_IFREG | S_IRUGO, 1, 0, 0, 0,
+ &proc_net_inode_operations, scc_net_get_info
+};
+
+#define scc_net_procfs_init() proc_net_register(&scc_proc_dir_entry);
+#define scc_net_procfs_remove() proc_net_unregister(PROC_NET_Z8530);
+#else
+#define scc_net_procfs_init()
+#define scc_net_procfs_remove()
+#endif
+
+
+/* ******************************************************************** */
+/* * Init SCC driver * */
+/* ******************************************************************** */
+
+int scc_init (void)
+{
+ int chip, chan, k, result;
+ char devname[10];
+
+ printk(KERN_INFO BANNER);
+
+ memset(&SCC_ctrl, 0, sizeof(SCC_ctrl));
+
+ /* pre-init channel information */
+
+ for (chip = 0; chip < MAXSCC; chip++)
+ {
+ memset((char *) &SCC_Info[2*chip ], 0, sizeof(struct scc_channel));
+ memset((char *) &SCC_Info[2*chip+1], 0, sizeof(struct scc_channel));
+
+ for (chan = 0; chan < 2; chan++)
+ SCC_Info[2*chip+chan].magic = SCC_MAGIC;
+ }
+
+ for (k = 0; k < 16; k++) Ivec[k].used = 0;
+
+ sprintf(devname,"%s0", SCC_DriverName);
+
+ result = scc_net_setup(SCC_Info, devname);
+ if (result)
+ {
+ printk(KERN_ERR "z8530drv: cannot initialize module\n");
+ return result;
+ }
+
+ scc_net_procfs_init();
+
+ return 0;
+}
+
+/* ******************************************************************** */
+/* * Module support * */
+/* ******************************************************************** */
+
+
+#ifdef MODULE
+int init_module(void)
+{
+ int result = 0;
+
+ result = scc_init();
+
+ if (result == 0)
+ printk(KERN_INFO "Copyright 1993,1996 Joerg Reuter DL1BKE (jreuter@lykos.tng.oche.de)\n");
+
+ return result;
+}
+
+void cleanup_module(void)
+{
+ long flags;
+ io_port ctrl;
+ int k;
+ struct scc_channel *scc;
+
+ save_flags(flags);
+ cli();
+
+ if (Nchips == 0)
+ unregister_netdev(SCC_Info[0].dev);
+
+ for (k = 0; k < Nchips; k++)
+ if ( (ctrl = SCC_ctrl[k].chan_A) )
+ {
+ Outb(ctrl, 0);
+ OutReg(ctrl,R9,FHWRES); /* force hardware reset */
+ udelay(50);
+ }
+
+ for (k = 0; k < Nchips*2; k++)
+ {
+ scc = &SCC_Info[k];
+ if (scc)
+ {
+ release_region(scc->ctrl, 1);
+ release_region(scc->data, 1);
+ if (scc->dev)
+ {
+ unregister_netdev(scc->dev);
+ kfree(scc->dev);
+ }
+ }
+ }
+
+ for (k=0; k < 16 ; k++)
+ if (Ivec[k].used) free_irq(k, NULL);
+
+ restore_flags(flags);
+
+ scc_net_procfs_remove();
+}
+#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov