patch-2.1.70 linux/include/linux/isp16.h

Next file: linux/include/linux/limits.h
Previous file: linux/include/linux/interrupt.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.69/linux/include/linux/isp16.h linux/include/linux/isp16.h
@@ -1,75 +0,0 @@
-/* -- isp16.h
- *
- *  Header for detection and initialisation of cdrom interface (only) on
- *  ISP16 (MAD16, Mozart) sound card.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/* These are the default values */
-#define ISP16_CDROM_TYPE "Sanyo"
-#define ISP16_CDROM_IO_BASE 0x340
-#define ISP16_CDROM_IRQ 0
-#define ISP16_CDROM_DMA 0
-
-/* Some (Media)Magic */
-/* define types of drive the interface on an ISP16 card may be looking at */
-#define ISP16_DRIVE_X 0x00
-#define ISP16_SONY  0x02
-#define ISP16_PANASONIC0 0x02
-#define ISP16_SANYO0 0x02
-#define ISP16_MITSUMI  0x04
-#define ISP16_PANASONIC1 0x06
-#define ISP16_SANYO1 0x06
-#define ISP16_DRIVE_NOT_USED 0x08  /* not used */
-#define ISP16_DRIVE_SET_MASK 0xF1  /* don't change 0-bit or 4-7-bits*/
-/* ...for port */
-#define ISP16_DRIVE_SET_PORT 0xF8D
-/* set io parameters */
-#define ISP16_BASE_340  0x00
-#define ISP16_BASE_330  0x40
-#define ISP16_BASE_360  0x80
-#define ISP16_BASE_320  0xC0
-#define ISP16_IRQ_X  0x00
-#define ISP16_IRQ_5  0x04  /* shouldn't be used to avoid sound card conflicts */
-#define ISP16_IRQ_7  0x08  /* shouldn't be used to avoid sound card conflicts */
-#define ISP16_IRQ_3  0x0C
-#define ISP16_IRQ_9  0x10
-#define ISP16_IRQ_10  0x14
-#define ISP16_IRQ_11  0x18
-#define ISP16_DMA_X  0x03
-#define ISP16_DMA_3  0x00
-#define ISP16_DMA_5  0x00
-#define ISP16_DMA_6  0x01
-#define ISP16_DMA_7  0x02
-#define ISP16_IO_SET_MASK  0x20  /* don't change 5-bit */
-/* ...for port */
-#define ISP16_IO_SET_PORT  0xF8E
-/* enable the card */
-#define ISP16_C928__ENABLE_PORT  0xF90  /* ISP16 with OPTi 82C928 chip */
-#define ISP16_C929__ENABLE_PORT  0xF91  /* ISP16 with OPTi 82C929 chip */
-#define ISP16_ENABLE_CDROM  0x80  /* seven bit */
-
-/* the magic stuff */
-#define ISP16_CTRL_PORT  0xF8F
-#define ISP16_C928__CTRL  0xE2  /* ISP16 with OPTi 82C928 chip */
-#define ISP16_C929__CTRL  0xE3  /* ISP16 with OPTi 82C929 chip */
-
-#define ISP16_IO_BASE 0xF8D
-#define ISP16_IO_SIZE 5  /* ports used from 0xF8D up to 0xF91 */
-
-void isp16_setup(char *str, int *ints);
-int isp16_init(void);

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov