patch-2.2.10 linux/drivers/scsi/aic7xxx_reg.h
Next file: linux/drivers/scsi/aic7xxx_seq.c
Previous file: linux/drivers/scsi/aic7xxx_proc.c
Back to the patch index
Back to the overall index
- Lines: 92
- Date:
Wed Jun 9 16:59:34 1999
- Orig file:
v2.2.9/linux/drivers/scsi/aic7xxx_reg.h
- Orig date:
Fri Oct 9 13:27:11 1998
diff -u --recursive --new-file v2.2.9/linux/drivers/scsi/aic7xxx_reg.h linux/drivers/scsi/aic7xxx_reg.h
@@ -63,6 +63,16 @@
#define STCNT 0x08
+#define OPTIONMODE 0x08
+#define AUTORATEEN 0x80
+#define AUTOACKEN 0x40
+#define ATNMGMNTEN 0x20
+#define BUSFREEREV 0x10
+#define EXPPHASEDIS 0x08
+#define SCSIDATL_IMGEN 0x04
+#define AUTO_MSGOUT_DE 0x02
+#define DIS_MSGIN_DUALEDGE 0x01
+
#define CLRSINT0 0x0b
#define CLRSELDO 0x40
#define CLRSELDI 0x20
@@ -102,8 +112,14 @@
#define SSTAT2 0x0d
#define OVERRUN 0x80
+#define SHVALID 0x40
+#define WIDE_RES 0x20
#define SFCNT 0x1f
#define EXP_ACTIVE 0x10
+#define CRCVALERR 0x08
+#define CRCENDERR 0x04
+#define CRCREQERR 0x02
+#define DUAL_EDGE_ERROR 0x01
#define SSTAT3 0x0e
#define SCSICNT 0xf0
@@ -412,6 +428,7 @@
#define DPARERR 0x10
#define SQPARERR 0x08
#define ILLOPCODE 0x04
+#define DSCTMOUT 0x02
#define ILLSADDR 0x02
#define ILLHADDR 0x01
@@ -436,11 +453,30 @@
#define QINCNT 0x9c
+#define SCSIDATL_IMG 0x9c
+
#define QOUTFIFO 0x9d
+#define CRCCONTROL1 0x9d
+#define CRCONSEEN 0x80
+#define TARGCRCCNTEN 0x40
+#define CRCVALCHKEN 0x40
+#define CRCENDCHKEN 0x20
+#define CRCREQCHKEN 0x10
+#define TARGCRCENDEN 0x08
+
+#define SCSIPHASE 0x9e
+#define SP_STATUS 0x20
+#define SP_COMMAND 0x10
+#define SP_MSG_IN 0x08
+#define SP_MSG_OUT 0x04
+#define SP_DATA_IN 0x02
+#define SP_DATA_OUT 0x01
+
#define QOUTCNT 0x9e
#define SFUNCT 0x9f
+#define ALT_MODE 0x80
#define SCB_CONTROL 0xa0
#define MK_MESSAGE 0x80
@@ -525,14 +561,20 @@
#define HNSCB_QOFF 0xf4
+#define HESCB_QOFF 0xf5
+
#define SNSCB_QOFF 0xf6
+#define SESCB_QOFF 0xf7
+
#define SDSCB_QOFF 0xf8
#define QOFF_CTLSTA 0xfa
+#define ESTABLISH_SCB_AVAIL 0x80
#define SCB_AVAIL 0x40
#define SNSCB_ROLLOVER 0x20
#define SDSCB_ROLLOVER 0x10
+#define SESCB_ROLLOVER 0x08
#define SCB_QSIZE 0x07
#define SCB_QSIZE_256 0x06
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)