patch-2.2.10 linux/net/irda/irlap_event.c

Next file: linux/net/irda/irlap_frame.c
Previous file: linux/net/irda/irlap_comp.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.2.9/linux/net/irda/irlap_event.c linux/net/irda/irlap_event.c
@@ -6,10 +6,10 @@
  * Status:        Experimental.
  * Author:        Dag Brattli <dagb@cs.uit.no>
  * Created at:    Sat Aug 16 00:59:29 1997
- * Modified at:   Fri Apr 23 11:55:12 1999
+ * Modified at:   Mon May 31 21:55:42 1999
  * Modified by:   Dag Brattli <dagb@cs.uit.no>
  * 
- *     Copyright (c) 1998 Dag Brattli <dagb@cs.uit.no>,
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>,
  *                        Thomas Davis <ratbert@radiks.net>
  *     All Rights Reserved.
  *     
@@ -209,8 +209,8 @@
  *    Rushes through the state machine without any delay. If state == XMIT
  *    then send queued data frames. 
  */
-void irlap_do_event( struct irlap_cb *self, IRLAP_EVENT event, 
-		     struct sk_buff *skb, struct irlap_info *info) 
+void irlap_do_event(struct irlap_cb *self, IRLAP_EVENT event, 
+		    struct sk_buff *skb, struct irlap_info *info) 
 {
 	int ret;
 	
@@ -218,7 +218,7 @@
 		return;
 	
   	DEBUG(4, __FUNCTION__ "(), event = %s, state = %s\n", 
-	      irlap_event[ event], irlap_state[ self->state]); 
+	      irlap_event[event], irlap_state[self->state]); 
 	
 	ret = (*state[ self->state]) (self, event, skb, info);
 	
@@ -236,13 +236,12 @@
 		if (skb_queue_len(&self->tx_list)) {
 			/* Try to send away all queued data frames */
 			while ((skb = skb_dequeue(&self->tx_list)) != NULL) {
-				ret = (*state[ self->state])(self, SEND_I_CMD,
-							     skb, NULL);
+				ret = (*state[self->state])(self, SEND_I_CMD,
+							    skb, NULL);
 				if ( ret == -EPROTO)
 					break; /* Try again later! */
 			}
 		} else if (self->disconnect_pending) {
-			DEBUG(0, __FUNCTION__ "(), disconnecting!\n");
 			self->disconnect_pending = FALSE;
 			
 			ret = (*state[self->state])(self, DISCONNECT_REQUEST,
@@ -274,22 +273,22 @@
  *    Switches state and provides debug information
  *
  */
-void irlap_next_state( struct irlap_cb *self, IRLAP_STATE state) 
+void irlap_next_state(struct irlap_cb *self, IRLAP_STATE state) 
 {	
-	if ( !self || self->magic != LAP_MAGIC)
+	if (!self || self->magic != LAP_MAGIC)
 		return;
 	
-	DEBUG( 4, "next LAP state = %s\n", irlap_state[ state]);
+	DEBUG(4, "next LAP state = %s\n", irlap_state[ state]);
 
 	self->state = state;
 
 	/*
 	 *  If we are swithing away from a XMIT state then we are allowed to 
 	 *  transmit a maximum number of bytes again when we enter the XMIT 
-	 *  state again. Since its possible to "switch" from XMIT to XMIT and
+	 *  state again. Since its possible to "switch" from XMIT to XMIT,
 	 *  we cannot do this when swithing into the XMIT state :-)
 	 */
-	if (( state != LAP_XMIT_P) && ( state != LAP_XMIT_S))
+	if ((state != LAP_XMIT_P) && (state != LAP_XMIT_S))
 		self->bytes_left = self->window_bytes;
 }
 
@@ -310,7 +309,7 @@
 	ASSERT( self != NULL, return -1;);
 	ASSERT( self->magic == LAP_MAGIC, return -1;);
 
-	switch( event) {
+	switch(event) {
 	case CONNECT_REQUEST:
 		ASSERT( self->irdev != NULL, return -1;);
 
@@ -393,7 +392,6 @@
 			irlap_start_query_timer( self, QUERY_TIMEOUT);
 			irlap_next_state( self, LAP_REPLY);
 		}
-
 		dev_kfree_skb(skb);
 		break;
 
@@ -530,7 +528,7 @@
 			irlap_send_discovery_xid_frame(self, info->S,
 						       self->slot, FALSE,
 						       discovery_rsp);
-
+			
 			self->frame_sent = TRUE;
 			irlap_next_state(self, LAP_REPLY);
 		}
@@ -568,27 +566,28 @@
 
 	switch (event) {
 	case CONNECT_RESPONSE:
-		skb_pull( skb, 11);
+		/* skb_pull(skb, 11); */
+		skb_pull(skb, sizeof(struct snrm_frame));
 
-		ASSERT( self->irdev != NULL, return -1;);
-		irda_qos_negotiate( &self->qos_rx, &self->qos_tx, skb);
+		ASSERT(self->irdev != NULL, return -1;);
+		irda_qos_negotiate(&self->qos_rx, &self->qos_tx, skb);
 
 		irlap_initiate_connection_state( self);
 
 		/*
 		 * We are allowed to send two frames!
 		 */
-		irlap_send_ua_response_frame( self, &self->qos_rx);
-		irlap_send_ua_response_frame( self, &self->qos_rx);
+		irlap_send_ua_response_frame(self, &self->qos_rx);
+		irlap_send_ua_response_frame(self, &self->qos_rx);
 		
-		irlap_apply_connection_parameters( self, &self->qos_tx);
+		irlap_apply_connection_parameters(self, &self->qos_tx);
 
 		/*
 		 *  The WD-timer could be set to the duration of the P-timer 
-		 *  for this case, but it is recommomended to use twice the 
+		 *  for this case, but it is recommended to use twice the 
 		 *  value (note 3 IrLAP p. 60). 
 		 */
-		irlap_start_wd_timer( self, self->wd_timeout);
+		irlap_start_wd_timer(self, self->wd_timeout);
 		irlap_next_state( self, LAP_NRM_S);
 		break;
 
@@ -669,28 +668,30 @@
 		 *  The device with the largest device address wins the battle
 		 *  (both have sent a SNRM command!)
 		 */
-		if ( info->daddr > self->saddr) {
-			del_timer( &self->final_timer);
-			irlap_initiate_connection_state( self);
+		if (info->daddr > self->saddr) {
+			del_timer(&self->final_timer);
+			irlap_initiate_connection_state(self);
 
-			ASSERT( self->irdev != NULL, return -1;);
-			irda_qos_negotiate( &self->qos_rx, &self->qos_tx, skb);
+			ASSERT(self->irdev != NULL, return -1;);
+			/* skb_pull(skb, 11); */
+			skb_pull(skb, sizeof(struct snrm_frame));
+			irda_qos_negotiate(&self->qos_rx, &self->qos_tx, skb);
 			
 			irlap_send_ua_response_frame(self, &self->qos_rx);
-			irlap_apply_connection_parameters( self, &self->qos_tx);
-			irlap_connect_confirm( self, skb);
+			irlap_apply_connection_parameters(self, &self->qos_tx);
+			irlap_connect_confirm(self, skb);
 			
 			/* 
 			 *  The WD-timer could be set to the duration of the
-			 *  P-timer for this case, but it is recommomended
+			 *  P-timer for this case, but it is recommended
 			 *  to use twice the value (note 3 IrLAP p. 60).  
 			 */
-			irlap_start_wd_timer( self, self->wd_timeout);
+			irlap_start_wd_timer(self, self->wd_timeout);
 			
-			irlap_next_state( self, LAP_NRM_S);
+			irlap_next_state(self, LAP_NRM_S);
 		} else {
 			/* We just ignore the other device! */
-			irlap_next_state( self, LAP_SETUP);
+			irlap_next_state(self, LAP_SETUP);
 		}
 		break;
 	case RECV_UA_RSP:
@@ -702,9 +703,10 @@
 
 		/* Negotiate connection parameters */
 		ASSERT( skb->len > 10, return -1;);
-		skb_pull( skb, 10);
+		/* skb_pull(skb, 10); */
+		skb_pull(skb, sizeof(struct ua_frame));
 
-		ASSERT( self->irdev != NULL, return -1;);
+		ASSERT(self->irdev != NULL, return -1;);
 		irda_qos_negotiate( &self->qos_rx, &self->qos_tx, skb);
 
 		irlap_apply_connection_parameters( self, &self->qos_tx); 
@@ -758,36 +760,30 @@
  *    stations.
  * 
  */
-static int irlap_state_xmit_p( struct irlap_cb *self, IRLAP_EVENT event, 
-			       struct sk_buff *skb, struct irlap_info *info) 
+static int irlap_state_xmit_p(struct irlap_cb *self, IRLAP_EVENT event, 
+			      struct sk_buff *skb, struct irlap_info *info) 
 {
 	int ret = 0;
 	
-	ASSERT( self != NULL, return -ENODEV;);
-	ASSERT( self->magic == LAP_MAGIC, return -EBADR;);
-
-	DEBUG( 4, __FUNCTION__ "(), event=%s, vs=%d, vr=%d", 
-	       irlap_event[ event], self->vs, self->vr); 
+	DEBUG(4, __FUNCTION__ "(), event=%s, vs=%d, vr=%d", 
+	      irlap_event[event], self->vs, self->vr);
 		
 	switch (event) {
 	case SEND_I_CMD:
-		ASSERT( skb != NULL, return -1;);
-		DEBUG( 4, __FUNCTION__ "(), Window=%d\n", self->window);
-		
 		/*
 		 *  Only send frame if send-window > 0.
 		 */ 
-		if (( self->window > 0) && ( !self->remote_busy)) {
+		if ((self->window > 0) && (!self->remote_busy)) {
 
 			/*
 			 *  Test if we have transmitted more bytes over the 
 			 *  link than its possible to do with the current 
 			 *  speed and turn-around-time.
 			 */
-			if (( skb->len+self->bofs_count) > self->bytes_left) {
-				DEBUG( 4, __FUNCTION__ "(), Not allowed to "
-				       "transmit more bytes!\n");
-				skb_queue_head( &self->tx_list, skb);
+			if ((skb->len+self->bofs_count) > self->bytes_left) {
+				DEBUG(4, __FUNCTION__ "(), Not allowed to "
+				      "transmit more bytes!\n");
+				skb_queue_head(&self->tx_list, skb);
 
 				/*
 				 *  We should switch state to LAP_NRM_P, but
@@ -799,7 +795,7 @@
 				 */
 				return -EPROTO;
 			}
-			self->bytes_left -= ( skb->len + self->bofs_count);
+			self->bytes_left -= (skb->len + self->bofs_count);
 
 			/*
 			 *  Send data with poll bit cleared only if window > 1
@@ -808,11 +804,9 @@
 			if (( self->window > 1) && 
 			    skb_queue_len( &self->tx_list) > 0) 
 			{   
-				DEBUG( 4, __FUNCTION__ "(), window > 1\n");
 				irlap_send_data_primary( self, skb);
 				irlap_next_state( self, LAP_XMIT_P);
 			} else {
-				DEBUG( 4, __FUNCTION__ "(), window <= 1\n");
 				irlap_send_data_primary_poll( self, skb);
 				irlap_next_state( self, LAP_NRM_P);
 				
@@ -930,9 +924,6 @@
 	int ns_status;
 	int nr_status;
 
-	ASSERT(self != NULL, return -1;);
-	ASSERT(self->magic == LAP_MAGIC, return -1;);
-
 	switch (event) {
 	case RECV_I_RSP: /* Optimize for the common case */
 		/* FIXME: must check for remote_busy below */
@@ -944,7 +935,6 @@
 		 */
 		self->fast_RR = FALSE;
 #endif
-
 		ASSERT( info != NULL, return -1;);
 
 		ns_status = irlap_validate_ns_received(self, info->ns);
@@ -1138,13 +1128,6 @@
 		}
 		break;
 	case RECV_RR_RSP:
-		DEBUG(4, __FUNCTION__ "(), RECV_RR_FRAME: "
-		      "Retrans:%d, nr=%d, va=%d, vs=%d, vr=%d\n",
-		      self->retry_count, info->nr, self->va, self->vs, 
-		      self->vr);
-
-		ASSERT(info != NULL, return -1;);
-
 		/*  
 		 *  If you get a RR, the remote isn't busy anymore, 
 		 *  no matter what the NR 
@@ -1191,14 +1174,6 @@
 			/* Resend rejected frames */
 			irlap_resend_rejected_frames( self, CMD_FRAME);
 			
-			/*
-			 *  Start only if not running, DB
-			 *  TODO: Should this one be here?
-			 */
-			/* if ( !self->final_timer.prev) */
-/* 				irda_start_timer( FINAL_TIMER, self->final_timeout);  */
-
-			/* Keep state */
 			irlap_next_state( self, LAP_NRM_P);
 		} else if (ret == NR_INVALID) {
 			DEBUG(1, "irlap_state_nrm_p: received RR with "
@@ -1207,8 +1182,7 @@
 
 			irlap_next_state( self, LAP_RESET_WAIT);
 
-			irlap_disconnect_indication( self, 
-						     LAP_RESET_INDICATION);
+			irlap_disconnect_indication(self, LAP_RESET_INDICATION);
 			self->xmitflag = TRUE;
 		}
 		if (skb)
@@ -1476,13 +1450,13 @@
 		/*
 		 *  Send frame only if send window > 1
 		 */ 
-		if (( self->window > 0) && ( !self->remote_busy)) {
+		if ((self->window > 0) && ( !self->remote_busy)) {
 			/*
 			 *  Test if we have transmitted more bytes over the 
 			 *  link than its possible to do with the current 
 			 *  speed and turn-around-time.
 			 */
-			if (( skb->len+self->bofs_count) > self->bytes_left) {
+			if ((skb->len+self->bofs_count) > self->bytes_left) {
 				DEBUG( 4, "IrDA: Not allowed to transmit more bytes!\n");
 				skb_queue_head( &self->tx_list, skb);
 				/*
@@ -1504,11 +1478,9 @@
 			if (( self->window > 1) && 
 			    skb_queue_len( &self->tx_list) > 0) 
 			{   
-				DEBUG( 4, __FUNCTION__ "(), window > 1\n");
 				irlap_send_data_secondary( self, skb);
 				irlap_next_state( self, LAP_XMIT_S);
 			} else {
-				DEBUG( 4, "(), window <= 1\n");
 				irlap_send_data_secondary_final( self, skb);
 				irlap_next_state( self, LAP_NRM_S);
 
@@ -1570,7 +1542,7 @@
 			/* 
 			 *  poll bit cleared?
 			 */
-			if ( !info->pf) {
+			if (!info->pf) {
 				self->vr = (self->vr + 1) % 8;
 				
 				/* Update Nr received */
@@ -1600,35 +1572,39 @@
 				 *  also before changing to XMIT_S
 				 *  state. (note 1, IrLAP p. 82) 
 				 */
-				irlap_wait_min_turn_around( self, &self->qos_tx);
-				/*
-				 *  Any pending data requests?
+				irlap_wait_min_turn_around(self, &self->qos_tx);
+
+				/*  
+				 * Give higher layers a chance to
+				 * immediately reply with some data before
+				 * we decide if we should send a RR frame
+				 * or not
 				 */
-				if (( skb_queue_len( &self->tx_list) > 0) && 
-				    ( self->window > 0)) 
+				irlap_data_indication(self, skb);
+
+				/* Any pending data requests?  */
+				if ((skb_queue_len(&self->tx_list) > 0) && 
+				    (self->window > 0)) 
 				{
 					self->ack_required = TRUE;
 					
-					del_timer( &self->wd_timer);
+					del_timer(&self->wd_timer);
 					
-					irlap_next_state( self, LAP_XMIT_S);
+					irlap_next_state(self, LAP_XMIT_S);
 				} else {
-					irlap_send_rr_frame( self, RSP_FRAME);
-					irlap_start_wd_timer( self, self->wd_timeout);
+					irlap_send_rr_frame(self, RSP_FRAME);
+					irlap_start_wd_timer(self, self->wd_timeout);
 
 					/* Keep the state */
-					irlap_next_state( self, LAP_NRM_S);
+					irlap_next_state(self, LAP_NRM_S);
 				}
-				irlap_data_indication( self, skb);
-
 				break;
 			}
 		}
 		/*
 		 *  Check for Unexpected next to send (Ns)
 		 */
-		if (( ns_status == NS_UNEXPECTED) && 
-		    ( nr_status == NR_EXPECTED)) 
+		if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED))
 		{
 			/* Unexpected next to send, with final bit cleared */
 			if ( !info->pf) {
@@ -1651,8 +1627,7 @@
 		/* 
 		 *  Unexpected Next to Receive(NR) ?
 		 */
-		if (( ns_status == NS_EXPECTED) && 
-		    ( nr_status == NR_UNEXPECTED))
+		if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED))
 		{
 			if ( info->pf) {
 				DEBUG( 4, "RECV_I_RSP: frame(s) lost\n");
@@ -1748,20 +1723,20 @@
 				irlap_update_nr_received( self, info->nr);
 				del_timer( &self->wd_timer);
 				
-				irlap_wait_min_turn_around( self, &self->qos_tx);
+				irlap_wait_min_turn_around(self, &self->qos_tx);
 				irlap_next_state( self, LAP_XMIT_S);
 			} else {			
 				self->remote_busy = FALSE;
 				/* Update Nr received */
-				irlap_update_nr_received( self, info->nr);
-				irlap_wait_min_turn_around( self, &self->qos_tx);
+				irlap_update_nr_received(self, info->nr);
+				irlap_wait_min_turn_around(self, &self->qos_tx);
 				
-				irlap_send_rr_frame( self, RSP_FRAME);
+				irlap_send_rr_frame(self, RSP_FRAME);
 				
-				irlap_start_wd_timer( self, self->wd_timeout);
-				irlap_next_state( self, LAP_NRM_S);
+				irlap_start_wd_timer(self, self->wd_timeout);
+				irlap_next_state(self, LAP_NRM_S);
 			}
-		} else if ( nr_status == NR_UNEXPECTED) {
+		} else if (nr_status == NR_UNEXPECTED) {
 			self->remote_busy = FALSE;
 			irlap_update_nr_received( self, info->nr);
 			irlap_resend_rejected_frames( self, RSP_FRAME);
@@ -1773,8 +1748,8 @@
 		} else {
 			DEBUG(1, __FUNCTION__ "(), invalid nr not implemented!\n");
 		} 
-		if ( skb)
-			dev_kfree_skb( skb);
+		if (skb)
+			dev_kfree_skb(skb);
 
 		break;
 	case RECV_SNRM_CMD:
@@ -1886,7 +1861,7 @@
 	ASSERT( self != NULL, return -ENODEV;);
 	ASSERT( self->magic == LAP_MAGIC, return -EBADR;);
 	
-	switch( event) {
+	switch(event) {
 	case RESET_RESPONSE:
 		irlap_send_ua_response_frame( self, &self->qos_rx);
 		irlap_initiate_connection_state( self);

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)