patch-2.2.11 linux/drivers/net/rtl8139.c
Next file: linux/drivers/net/sb1000.c
Previous file: linux/drivers/net/pcnet32.c
Back to the patch index
Back to the overall index
- Lines: 377
- Date:
Mon Aug 9 12:04:39 1999
- Orig file:
v2.2.10/linux/drivers/net/rtl8139.c
- Orig date:
Sun Nov 22 09:47:52 1998
diff -u --recursive --new-file v2.2.10/linux/drivers/net/rtl8139.c linux/drivers/net/rtl8139.c
@@ -1,6 +1,6 @@
/* rtl8139.c: A RealTek RTL8129/8139 Fast Ethernet driver for Linux. */
/*
- Written 1997-1998 by Donald Becker.
+ Written 1997-1999 by Donald Becker.
This software may be used and distributed according to the terms
of the GNU Public License, incorporated herein by reference.
@@ -16,11 +16,11 @@
Support and updates available at
http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
- Twister-tuning code contributed by Kinston <shangh@realtek.com.tw>.
+ Twister-tuning table provided by Kinston <shangh@realtek.com.tw>.
*/
static const char *version =
-"rtl8139.c:v1.04 9/22/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html\n";
+"rtl8139.c:v1.07 5/6/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html\n";
/* A few user-configurable values. */
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
@@ -178,7 +178,9 @@
0x10ec, 0x8129, 0xffff, PCI_USES_IO|PCI_USES_MASTER, 0x80, rtl8129_probe1},
{ "RealTek RTL8139 Fast Ethernet",
0x10ec, 0x8139, 0xffff, PCI_USES_IO|PCI_USES_MASTER, 0x80, rtl8129_probe1},
- { "RealTek RTL8139 Fast Ethernet (mislabeled)",
+ { "SMC1211TX EZCard 10/100 (RealTek RTL8139)",
+ 0x1113, 0x1211, 0xffff, PCI_USES_IO|PCI_USES_MASTER, 0x80, rtl8129_probe1},
+ { "Accton MPX5030 (RealTek RTL8139)",
0x1113, 0x1211, 0xffff, PCI_USES_IO|PCI_USES_MASTER, 0x80, rtl8129_probe1},
{0,}, /* 0 terminated list. */
};
@@ -235,13 +237,13 @@
RxBadAlign=0x0002, RxStatusOK=0x0001,
};
+/* Twister tuning parameters from RealTek.
+ Completely undocumented, but required to tune bad links. */
enum CSCRBits {
CSCR_LinkOKBit=0x0400, CSCR_LinkChangeBit=0x0800,
CSCR_LinkStatusBits=0x0f000, CSCR_LinkDownOffCmd=0x003c0,
CSCR_LinkDownCmd=0x0f3c0,
-};
-
-/* Twister tuning parameters from RealTek. Completely undocumented. */
+};
unsigned long param[4][4]={
{0x0cb39de43,0x0cb39ce43,0x0fb38de03,0x0cb38de43},
{0x0cb39de43,0x0cb39ce43,0x0cb39ce83,0x0cb39ce83},
@@ -270,9 +272,10 @@
unsigned char *rx_ring;
unsigned char *tx_bufs; /* Tx bounce buffer region. */
char phys[4]; /* MII device addresses. */
+ char twistie, twist_cnt; /* Twister tune state. */
unsigned int tx_full:1; /* The Tx queue is full. */
unsigned int full_duplex:1; /* Full-duplex operation requested. */
- unsigned int duplex_lock:1; /* Full-duplex operation requested. */
+ unsigned int duplex_lock:1;
unsigned int default_port:4; /* Last dev->if_port value. */
unsigned int media2:4; /* Secondary monitored media port. */
unsigned int medialock:1; /* Don't sense media type. */
@@ -325,7 +328,7 @@
if ( ! pcibios_present())
return -ENODEV;
- for (;pci_index < 0xff; pci_index++) {
+ for (; pci_index < 0xff; pci_index++) {
u16 vendor, device, pci_command, new_command;
int chip_idx, irq;
long ioaddr;
@@ -402,9 +405,9 @@
return cards_found ? 0 : -ENODEV;
}
-static struct device * rtl8129_probe1(int pci_bus, int pci_devfn,
- struct device *dev, long ioaddr,
- int irq, int chip_idx, int found_cnt)
+static struct device *rtl8129_probe1(int pci_bus, int pci_devfn,
+ struct device *dev, long ioaddr,
+ int irq, int chip_idx, int found_cnt)
{
static int did_version = 0; /* Already printed version info. */
struct rtl8129_private *tp;
@@ -470,9 +473,8 @@
dev->name);
tp->phys[0] = -1;
}
- } else {
- tp->phys[0] = 32;
- }
+ } else
+ tp->phys[0] = 32;
/* Put the chip into low-power mode. */
outb(0xC0, ioaddr + Cfg9346);
@@ -601,7 +603,7 @@
int retval = 0;
int i;
- if ((phy_id & 0x1f) == 0) { /* Really a 8139. Use internal registers. */
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
return location < 8 && mii_2_8139_map[location] ?
inw(dev->base_addr + mii_2_8139_map[location]) : 0;
}
@@ -633,7 +635,7 @@
int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value;
int i;
- if (phy_id == 32) { /* Really a 8139. Use internal registers. */
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
if (location < 8 && mii_2_8139_map[location])
outw(value, dev->base_addr + mii_2_8139_map[location]);
return;
@@ -678,6 +680,7 @@
tp->tx_bufs = kmalloc(TX_BUF_SIZE * NUM_TX_DESC, GFP_KERNEL);
tp->rx_ring = kmalloc(RX_BUF_LEN + 16, GFP_KERNEL);
if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
+ free_irq(dev->irq, dev);
if (tp->tx_bufs)
kfree(tp->tx_bufs);
if (rtl8129_debug > 0)
@@ -736,7 +739,7 @@
/* Enable all known interrupts by setting the interrupt mask. */
outw(PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver
- | TxErr | TxOK | RxErr | RxOK, ioaddr + IntrMask);
+ | TxErr | TxOK | RxErr | RxOK, ioaddr + IntrMask);
if (rtl8129_debug > 1)
printk(KERN_DEBUG"%s: rtl8129_open() ioaddr %#lx IRQ %d"
@@ -749,7 +752,7 @@
init_timer(&tp->timer);
tp->timer.expires = RUN_AT((24*HZ)/10); /* 2.4 sec. */
tp->timer.data = (unsigned long)dev;
- tp->timer.function = &rtl8129_timer; /* timer handler */
+ tp->timer.function = &rtl8129_timer;
add_timer(&tp->timer);
return 0;
@@ -760,7 +763,7 @@
struct device *dev = (struct device *)data;
struct rtl8129_private *tp = (struct rtl8129_private *)dev->priv;
long ioaddr = dev->base_addr;
- int next_tick = 0;
+ int next_tick = 60*HZ;
int mii_reg5 = mdio_read(dev, tp->phys[0], 5);
if (! tp->duplex_lock && mii_reg5 != 0xffff) {
@@ -774,8 +777,65 @@
outb(tp->full_duplex ? 0x60 : 0x20, ioaddr + Config1);
outb(0x00, ioaddr + Cfg9346);
}
- next_tick = 60*HZ;
}
+ /* Check for bogusness. */
+ if (inw(ioaddr + IntrStatus) & (TxOK | RxOK)) {
+ int status = inw(ioaddr + IntrStatus);
+ if (status & (TxOK | RxOK)) { /* Double check */
+ printk(KERN_ERR "%s: RTL8139 Interrupt line blocked, status %x.\n",
+ dev->name, status);
+ rtl8129_interrupt(dev->irq, dev, 0);
+ }
+ }
+ if (dev->tbusy && jiffies - dev->trans_start >= 2*TX_TIMEOUT)
+ rtl8129_tx_timeout(dev);
+
+#if 0
+ if (tp->twistie) {
+ unsigned int CSCRval = inw(ioaddr + CSCR); /* Read link status. */
+ if (tp->twistie == 1) {
+ if (CSCRval & CSCR_LinkOKBit) {
+ outw(CSCR_LinkDownOffCmd, ioaddr + CSCR);
+ tp->twistie = 2;
+ next_tick = HZ/10;
+ } else {
+ outw(CSCR_LinkDownCmd, ioaddr + CSCR);
+ outl(FIFOTMS_default,ioaddr + FIFOTMS);
+ outl(PARA78_default ,ioaddr + PARA78);
+ outl(PARA7c_default ,ioaddr + PARA7c);
+ tp->twistie = 0;
+ }
+ } else if (tp->twistie == 2) {
+ int linkcase = (CSCRval & CSCR_LinkStatusBits) >> 12;
+ int row;
+ if (linkcase >= 0x7000) row = 3;
+ else if (linkcase >= 0x3000) row = 2;
+ else if (linkcase >= 0x1000) row = 1;
+ else row = 0;
+ tp->twistie == row + 3;
+ outw(0,ioaddr+FIFOTMS);
+ outl(param[row][0], ioaddr+PARA7c);
+ tp->twist_cnt = 1;
+ } else {
+ outl(param[tp->twistie-3][tp->twist_cnt], ioaddr+PARA7c);
+ if (++tp->twist_cnt < 4) {
+ next_tick = HZ/10;
+ } else if (tp->twistie-3 == 3) {
+ if ((CSCRval & CSCR_LinkStatusBits) != 0x7000) {
+ outl(PARA7c_xxx, ioaddr+PARA7c);
+ next_tick = HZ/10; /* 100ms. */
+ outl(FIFOTMS_default, ioaddr+FIFOTMS);
+ outl(PARA78_default, ioaddr+PARA78);
+ outl(PARA7c_default, ioaddr+PARA7c);
+ tp->twistie == 3 + 3;
+ outw(0,ioaddr+FIFOTMS);
+ outl(param[3][0], ioaddr+PARA7c);
+ tp->twist_cnt = 1;
+ }
+ }
+ }
+ }
+#endif
if (rtl8129_debug > 2) {
if (rtl_cap_tbl[tp->chip_id] & HAS_MII_XCVR)
@@ -792,10 +852,8 @@
dev->name, inb(ioaddr + Config0), inb(ioaddr + Config1));
}
- if (next_tick) {
- tp->timer.expires = RUN_AT(next_tick);
- add_timer(&tp->timer);
- }
+ tp->timer.expires = RUN_AT(next_tick);
+ add_timer(&tp->timer);
}
static void rtl8129_tx_timeout(struct device *dev)
@@ -861,7 +919,7 @@
}
tp->cur_tx = i;
while (i < NUM_TX_DESC)
- tp->tx_skbuff[i] = 0;
+ tp->tx_skbuff[i++] = 0;
if (tp->cur_tx - tp->dirty_tx < NUM_TX_DESC) {/* Typical path */
dev->tbusy = 0;
tp->tx_full = 0;
@@ -906,9 +964,8 @@
/* Block a timer-based transmit from overlapping. This could better be
done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) {
- if (jiffies - dev->trans_start < TX_TIMEOUT)
- return 1;
- rtl8129_tx_timeout(dev);
+ if (jiffies - dev->trans_start >= TX_TIMEOUT)
+ rtl8129_tx_timeout(dev);
return 1;
}
@@ -925,7 +982,7 @@
outl(tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN),
ioaddr + TxStatus0 + entry*4);
- if (++tp->cur_tx - tp->dirty_tx < NUM_TX_DESC) {/* Typical path */
+ if (++tp->cur_tx - tp->dirty_tx < NUM_TX_DESC) { /* Typical path */
clear_bit(0, (void*)&dev->tbusy);
} else {
tp->tx_full = 1;
@@ -946,7 +1003,7 @@
struct device *dev = (struct device *)dev_instance;
struct rtl8129_private *tp = (struct rtl8129_private *)dev->priv;
int boguscnt = max_interrupt_work;
- int status;
+ int status, link_changed = 0;
long ioaddr = dev->base_addr;
#if defined(__i386__)
@@ -967,7 +1024,10 @@
do {
status = inw(ioaddr + IntrStatus);
- /* Acknowledge all of the current interrupt sources ASAP. */
+ /* Acknowledge all of the current interrupt sources ASAP, but
+ an first get an additional status bit from CSCR. */
+ if ((status & RxUnderrun) && inw(ioaddr+CSCR) & CSCR_LinkChangeBit)
+ link_changed = 1;
outw(status, ioaddr + IntrStatus);
if (rtl8129_debug > 4)
@@ -982,9 +1042,9 @@
rtl8129_rx(dev);
if (status & (TxOK | TxErr)) {
- unsigned int dirty_tx;
+ unsigned int dirty_tx = tp->dirty_tx;
- for (dirty_tx = tp->dirty_tx; dirty_tx < tp->cur_tx; dirty_tx++) {
+ while (tp->cur_tx - dirty_tx > 0) {
int entry = dirty_tx % NUM_TX_DESC;
int txstatus = inl(ioaddr + TxStatus0 + entry*4);
@@ -994,11 +1054,9 @@
/* Note: TxCarrierLost is always asserted at 100mbps. */
if (txstatus & (TxOutOfWindow | TxAborted)) {
/* There was an major error, log it. */
-#ifndef final_version
if (rtl8129_debug > 1)
printk(KERN_NOTICE"%s: Transmit error, Tx status %8.8x.\n",
dev->name, txstatus);
-#endif
tp->stats.tx_errors++;
if (txstatus&TxAborted) {
tp->stats.tx_aborted_errors++;
@@ -1011,9 +1069,6 @@
tp->stats.collisions16++;
#endif
} else {
-#ifdef ETHER_STATS
- /* No count for tp->stats.tx_deferred */
-#endif
if (txstatus & TxUnderrun) {
/* Add 64 to the Tx FIFO threshold. */
if (tp->tx_flag < 0x00300000)
@@ -1030,6 +1085,13 @@
/* Free the original skb. */
dev_free_skb(tp->tx_skbuff[entry]);
tp->tx_skbuff[entry] = 0;
+ if (tp->tx_full) {
+ /* The ring is no longer full, clear tbusy. */
+ tp->tx_full = 0;
+ clear_bit(0, (void*)&dev->tbusy);
+ mark_bh(NET_BH);
+ }
+ dirty_tx++;
}
#ifndef final_version
@@ -1039,14 +1101,6 @@
dirty_tx += NUM_TX_DESC;
}
#endif
-
- if (tp->tx_full && dirty_tx > tp->cur_tx - NUM_TX_DESC) {
- /* The ring is no longer full, clear tbusy. */
- tp->tx_full = 0;
- dev->tbusy = 0;
- mark_bh(NET_BH);
- }
-
tp->dirty_tx = dirty_tx;
}
@@ -1063,7 +1117,7 @@
tp->stats.rx_missed_errors += inl(ioaddr + RxMissed);
outl(0, ioaddr + RxMissed);
- if ((status & RxUnderrun) &&
+ if ((status & RxUnderrun) && link_changed &&
(rtl_cap_tbl[tp->chip_id] & HAS_LNK_CHNG)) {
/* Really link-change on new chips. */
int lpar = inw(ioaddr + NWayLPAR);
@@ -1284,12 +1338,12 @@
data[0] = tp->phys[0] & 0x3f;
/* Fall Through */
case SIOCDEVPRIVATE+1: /* Read the specified MII register. */
- data[3] = mdio_read(dev, data[0] & 0x1f, data[1] & 0x1f);
+ data[3] = mdio_read(dev, data[0], data[1] & 0x1f);
return 0;
case SIOCDEVPRIVATE+2: /* Write the specified MII register */
- if (!suser())
+ if (!capable(CAP_NET_ADMIN))
return -EPERM;
- mdio_write(dev, data[0] & 0x1f, data[1] & 0x1f, data[2]);
+ mdio_write(dev, data[0], data[1] & 0x1f, data[2]);
return 0;
default:
return -EOPNOTSUPP;
@@ -1318,7 +1372,7 @@
{
int crc = -1;
- while(--length >= 0) {
+ while (--length >= 0) {
unsigned char current_octet = *data++;
int bit;
for (bit = 0; bit < 8; bit++, current_octet >>= 1)
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)