patch-2.2.19 linux/drivers/isdn/avmb1/Makefile

• Lines: 175
• Date: Sun Mar 25 11:37:31 2001
• Orig file: v2.2.18/drivers/isdn/avmb1/Makefile
• Orig date: Sun Mar 25 11:13:07 2001

diff -u --new-file --recursive --exclude-from /usr/src/exclude v2.2.18/drivers/isdn/avmb1/Makefile linux/drivers/isdn/avmb1/Makefile
@@ -1,135 +1,40 @@
-#
-# $Id: Makefile,v 1.8 2000/01/25 14:33:38 calle Exp $
-#
-# Makefile for the CAPI and AVM-B1 device drivers.
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now inherited from the
-# parent makes..
-#
-# $Log: Makefile,v $
-# Revision 1.8  2000/01/25 14:33:38  calle
-# - Added Support AVM B1 PCI V4.0 (tested with prototype)
-#   - splitted up t1pci.c into b1dma.c for common function with b1pciv4
-#   - support for revision register
-#
-# Revision 1.7  1999/09/15 08:16:03  calle
-# Implementation of 64Bit extention complete.
-#
-# Revision 1.6  1999/07/20 06:41:44  calle
-# Bugfix: After the redesign of the AVM B1 driver, the driver didn't even
-#         compile, if not selected as modules.
-#
-# Revision 1.5  1999/07/01 15:26:20  calle
-# complete new version (I love it):
-# + new hardware independed "capi_driver" interface that will make it easy to:
-#   - support other controllers with CAPI-2.0 (i.e. USB Controller)
-#   - write a CAPI-2.0 for the passive cards
-#   - support serial link CAPI-2.0 boxes.
-# + wrote "capi_driver" for all supported cards.
-# + "capi_driver" (supported cards) now have to be configured with
-#   make menuconfig, in the past all supported cards where included
-#   at once.
-# + new and better informations in /proc/capi/
-# + new ioctl to switch trace of capi messages per controller
-#   using "avmcapictrl trace [contr] on|off|...."
-# + complete testcircle with all supported cards and also the
-#   PCMCIA cards (now patch for pcmcia-cs-3.0.13 needed) done.
-#
-# Revision 1.4  1997/03/30 17:10:40  calle
-# added support for AVM-B1-PCI card.
-#
-# Revision 1.3  1997/03/22 02:00:57  fritz
-# -Reworked toplevel Makefile. From now on, no different Makefiles
-#  for standalone- and in-kernel-compilation are needed any more.
-# -Added local Rules.make for above reason.
-# -Experimental changes in teles3.c for enhanced IRQ-checking with
-#  2.1.X and SMP kernels.
-# -Removed diffstd-script, same functionality is in stddiff -r.
-# -Enhanced scripts std2kern and stddiff.
-#
-# Revision 1.1  1997/03/05 21:26:14  fritz
-# Renamed, according naming conventions in CVS tree.
-#
-# Revision 1.1  1997/03/04 21:50:26  calle
-# Frirst version in isdn4linux
-#
-# Revision 2.2  1997/02/12 09:31:39  calle
-#
-# Revision 1.1  1997/01/31 10:32:20  calle
-# Initial revision
-#
-#
-
-#
-# Objects that don't export a symtab
-#
-L_OBJS := # used as component of an L_TARGET
-O_OBJS := # used as component of an O_TARGET
-M_OBJS := # used as module
-#
-# Objects that do export a symtab
-#
-LX_OBJS := # used as component of an L_TARGET
-OX_OBJS := # used as component of an O_TARGET
-MX_OBJS := # used as module
-#
-# Targets, created by linking others
-#
-O_TARGET := # used for .o targets (from O and OX objects)
-L_TARGET := # used for .a targets (from L and LX objects)
-
-ifeq ($(CONFIG_ISDN_DRV_AVMB1),y)
-  O_TARGET += avmb1.o
-  OX_OBJS  += kcapi.o
-  O_OBJS   += capi.o
-  ifdef CONFIG_ISDN_DRV_AVMB1_B1ISA
-  O_OBJS   += b1isa.o
-  endif
-  ifdef CONFIG_ISDN_DRV_AVMB1_B1PCI
-  O_OBJS  += b1pci.o
-  endif
-  ifdef CONFIG_ISDN_DRV_AVMB1_T1ISA
-  O_OBJS   += t1isa.o
-  endif
-  ifdef CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
-  OX_OBJS   += b1pcmcia.o
-  endif
-  ifdef CONFIG_ISDN_DRV_AVMB1_T1PCI
-  O_OBJS   += t1pci.o
-  endif
-  ifdef CONFIG_ISDN_DRV_AVMB1_C4
-  O_OBJS   += c4.o
-  endif
-  OX_OBJS  += capiutil.o capidrv.o b1.o b1dma.o
-else
-  ifeq ($(CONFIG_ISDN_DRV_AVMB1),m)
-  O_TARGET += kernelcapi.o
-  OX_OBJS  += kcapi.o
-  M_OBJS   += capi.o kernelcapi.o
-  ifdef CONFIG_ISDN_DRV_AVMB1_B1ISA
-  M_OBJS   += b1isa.o
-  endif
-  ifdef CONFIG_ISDN_DRV_AVMB1_B1PCI
-  M_OBJS  += b1pci.o
-  endif
-  ifdef CONFIG_ISDN_DRV_AVMB1_T1ISA
-  M_OBJS   += t1isa.o
-  endif
-  ifdef CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
-  MX_OBJS  += b1pcmcia.o
-  endif
-  ifdef CONFIG_ISDN_DRV_AVMB1_T1PCI
-  M_OBJS   += t1pci.o
-  endif
-  ifdef CONFIG_ISDN_DRV_AVMB1_C4
-  M_OBJS   += c4.o
-  endif
-  MX_OBJS  += capiutil.o capidrv.o b1.o b1dma.o
-  endif
-endif
+# Makefile for the AVM ISDN device drivers and CAPI subsystem.
+
+# The target object and module list name.
+
+O_TARGET	:= vmlinux-obj.o
+
+# Objects that export symbols.
+
+export-objs	:= kcapi.o capiutil.o b1dma.o b1pcmcia.o b1.o capifs.o
+
+# Multipart objects.
+
+list-multi	:= kernelcapi.o
+kernelcapi-objs	:= kcapi.o
+
+# Ordering constraints: kernelcapi.o first
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_ISDN_CAPI)			+= kernelcapi.o capiutil.o
+obj-$(CONFIG_ISDN_CAPI_CAPI20)		+= capi.o 
+obj-$(CONFIG_ISDN_CAPI_CAPIDRV)		+= capidrv.o
+obj-$(CONFIG_ISDN_CAPI_CAPIFS)		+= capifs.o
+obj-$(CONFIG_ISDN_DRV_AVMB1_B1ISA)	+= b1isa.o b1.o
+obj-$(CONFIG_ISDN_DRV_AVMB1_B1PCI)	+= b1pci.o b1.o b1dma.o
+obj-$(CONFIG_ISDN_DRV_AVMB1_B1PCMCIA)	+= b1pcmcia.o b1.o
+obj-$(CONFIG_ISDN_DRV_AVMB1_AVM_CS)	+= avm_cs.o
+obj-$(CONFIG_ISDN_DRV_AVMB1_T1ISA)	+= t1isa.o b1.o
+obj-$(CONFIG_ISDN_DRV_AVMB1_T1PCI)	+= t1pci.o b1.o b1dma.o
+obj-$(CONFIG_ISDN_DRV_AVMB1_C4)		+= c4.o b1.o
+
+# The global Rules.make.
+
+include $(TOPDIR)/drivers/isdn/Rules.make
+
+# Link rules for multi-part drivers.
+
+kernelcapi.o: $(kernelcapi-objs)
+	$(LD) -r -o $@ $(kernelcapi-objs)
 
-include $(TOPDIR)/Rules.make