patch-2.3.20 linux/arch/mips/config.in

Next file: linux/arch/mips/kernel/pci.c
Previous file: linux/arch/m68k/config.in
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.19/linux/arch/mips/config.in linux/arch/mips/config.in
@@ -13,9 +13,9 @@
 comment 'Machine selection'
 bool 'Support for Acer PICA 1 chipset' CONFIG_ACER_PICA_61
 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-  bool 'Support for Algorithmics P4032' CONFIG_ALGOR_P4032
-  bool 'Support for BAGET MIPS series' CONFIG_BAGET_MIPS
-  bool 'Support for DECstations' CONFIG_DECSTATION
+   bool 'Support for Algorithmics P4032 (EXPERIMENTAL)' CONFIG_ALGOR_P4032
+   bool 'Support for BAGET MIPS series (EXPERIMENTAL)' CONFIG_BAGET_MIPS
+   bool 'Support for DECstations (EXPERIMENTAL)' CONFIG_DECSTATION
 fi
 bool 'Support for Mips Magnum 4000' CONFIG_MIPS_MAGNUM_4000
 bool 'Support for Olivetti M700-10' CONFIG_OLIVETTI_M700
@@ -30,19 +30,19 @@
 unset CONFIG_VIDEO_G364
 
 if [ "$CONFIG_ALGOR_P4032" = "y" ]; then
-	define_bool CONFIG_PCI y
+   define_bool CONFIG_PCI y
 fi
 if [ "$CONFIG_MIPS_MAGNUM_4000" = "y" -o \
      "$CONFIG_OLIVETTI_M700" = "y" ]; then
-	define_bool CONFIG_MIPS_JAZZ y
-	define_bool CONFIG_FB y
-	define_bool CONFIG_FB_G364 y	
+   define_bool CONFIG_MIPS_JAZZ y
+   define_bool CONFIG_FB y
+   define_bool CONFIG_FB_G364 y	
 fi
 if [ "$CONFIG_ACER_PICA_61" = "y" ]; then
-	define_bool CONFIG_MIPS_JAZZ y
+   define_bool CONFIG_MIPS_JAZZ y
 fi
 if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then
-	define_bool CONFIG_PCI y
+   define_bool CONFIG_PCI y
 fi
 endmenu
 
@@ -64,16 +64,16 @@
 comment 'General setup'
 
 if [ "$CONFIG_DECSTATION" = "y" ]; then
-  define_bool CONFIG_CPU_LITTLE_ENDIAN y
+   define_bool CONFIG_CPU_LITTLE_ENDIAN y
 else
-  bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN
+   bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN
 fi
 
 define_bool CONFIG_ELF_KERNEL y
 
 if [ "$CONFIG_CPU_LITTLE_ENDIAN" = "n" ]; then
-  define_bool CONFIG_BINFMT_IRIX y
-  define_bool CONFIG_FORWARD_KEYBOARD y
+   define_bool CONFIG_BINFMT_IRIX y
+   define_bool CONFIG_FORWARD_KEYBOARD y
 fi
 define_bool CONFIG_BINFMT_AOUT n
 define_bool CONFIG_BINFMT_ELF y
@@ -85,7 +85,7 @@
 bool 'Sysctl support' CONFIG_SYSCTL
 
 if [ "$CONFIG_SGI" != "y" -a "$CONFIG_DECSTATION" != "y" -a "$CONFIG_BAGET_MIPS" != "y" ]; then
-source drivers/parport/Config.in
+   source drivers/parport/Config.in
 fi
 endmenu
 
@@ -93,24 +93,20 @@
 comment 'Loadable module support'
 bool 'Enable loadable module support' CONFIG_MODULES
 if [ "$CONFIG_MODULES" = "y" ]; then
-  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
-  bool 'Kernel module loader' CONFIG_KMOD
-fi
-
-if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-  bool 'Support for frame buffer devices (EXPERIMENTAL)' CONFIG_FB
+   bool '  Set version information on all symbols for modules' CONFIG_MODVERSIONS
+   bool '  Kernel module loader' CONFIG_KMOD
 fi
 
 endmenu
 
 if [ "$CONFIG_DECSTATION" = "y" ]; then
-	mainmenu_option next_comment
-	comment 'TURBOchannel support'
-		bool 'TURBOchannel support' CONFIG_TC
-#		if [ "$CONFIG_TC" = "y" ]; then
-# 			tristate 'MAGMA Parallel port support' CONFIG_PARPORT
-#		fi
-	endmenu
+   mainmenu_option next_comment
+   comment 'TURBOchannel support'
+   bool 'TURBOchannel support' CONFIG_TC
+#   if [ "$CONFIG_TC" = "y" ]; then
+#      tristate '  MAGMA Parallel port support' CONFIG_PARPORT
+#   fi
+   endmenu
 fi
 
 source drivers/i2o/Config.in
@@ -120,7 +116,7 @@
 source drivers/block/Config.in
 
 if [ "$CONFIG_NET" = "y" ]; then
-  source net/Config.in
+   source net/Config.in
 fi
 
 mainmenu_option next_comment
@@ -129,125 +125,125 @@
 tristate 'SCSI support' CONFIG_SCSI
 
 if [ "$CONFIG_SCSI" != "n" ]; then
-	if [ "$CONFIG_SGI" = "y" -o "$CONFIG_DECSTATION" = "y" ]; then
-		comment 'SCSI support type (disk, tape, CDrom)'
+   if [ "$CONFIG_SGI" = "y" -o "$CONFIG_DECSTATION" = "y" ]; then
+      comment '  SCSI support type (disk, tape, CDrom)'
 
-		dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
-		dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
-		dep_tristate 'SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
-		dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI
-
-		comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
-
-		bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN
-
-		bool 'Verbose SCSI error reporting' CONFIG_SCSI_CONSTANTS
-
-		#mainmenu_option next_comment
-		comment 'SCSI low-level drivers'
-		if [ "$CONFIG_SGI" = "y" ]; then
-		dep_tristate 'SGI wd93 Scsi Driver' CONFIG_SCSI_SGIWD93 $CONFIG_SCSI
-	else
-			if [ "$CONFIG_TC" = "y" ]; then
-				dep_tristate 'DEC NCR53C94 Scsi Driver' CONFIG_SCSI_DECNCR $CONFIG_SCSI
-			fi
-			dep_tristate 'DEC SII Scsi Driver' CONFIG_SCSI_DECSII $CONFIG_SCSI
-		fi
-	else
-		source drivers/scsi/Config.in
-	fi
+      dep_tristate '  SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
+      dep_tristate '  SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
+      dep_tristate '  SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
+      dep_tristate '  SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI
+
+      comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
+
+      bool '  Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN
+
+      bool '  Verbose SCSI error reporting' CONFIG_SCSI_CONSTANTS
+
+      #mainmenu_option next_comment
+      comment 'SCSI low-level drivers'
+      if [ "$CONFIG_SGI" = "y" ]; then
+	 dep_tristate 'SGI wd93 Scsi Driver' CONFIG_SCSI_SGIWD93 $CONFIG_SCSI
+      else
+	 if [ "$CONFIG_TC" = "y" ]; then
+	    dep_tristate 'DEC NCR53C94 Scsi Driver' CONFIG_SCSI_DECNCR $CONFIG_SCSI
+	 fi
+	 dep_tristate 'DEC SII Scsi Driver' CONFIG_SCSI_DECSII $CONFIG_SCSI
+      fi
+   else
+      source drivers/scsi/Config.in
+   fi
 fi
 endmenu
 
 if [ "$CONFIG_NET" = "y" ]; then
-  mainmenu_option next_comment
-  comment 'Network device support'
+   mainmenu_option next_comment
+   comment 'Network device support'
 
-  bool 'Network device support' CONFIG_NETDEVICES
-  if [ "$CONFIG_NETDEVICES" = "y" ]; then
-    if [ "$CONFIG_SGI" != "y" -a "$CONFIG_DECSTATION" != "y" -a "$CONFIG_BAGET_MIPS" != "y" ]; then
-	source drivers/net/Config.in
-    else
-	tristate 'Dummy net driver support' CONFIG_DUMMY
-	tristate 'SLIP (serial line) support' CONFIG_SLIP
-	if [ "$CONFIG_SLIP" != "n" ]; then
-	  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
-	  bool ' Keepalive and linefill' CONFIG_SLIP_SMART
-	fi
-	tristate 'PPP (point-to-point) support' CONFIG_PPP
-	if [ ! "$CONFIG_PPP" = "n" ]; then
-	  comment 'CCP compressors for PPP are only built as modules.'
-	fi
-        if [ "$CONFIG_SGI" = "y" ]; then
-	bool 'SGI Seeq ethernet controller support' CONFIG_SGISEEQ
-    fi
-	if [ "$CONFIG_DECSTATION" = "y" ]; then
-          bool 'DEC LANCE ethernet controller support' CONFIG_DECLANCE
-        fi
-	if [ "$CONFIG_BAGET_MIPS" = "y" ]; then
-	  tristate 'Baget AMD LANCE support' CONFIG_BAGETLANCE
-	  tristate 'Baget Backplane Shared Memory support' CONFIG_BAGETBSM
-	fi
-    fi
-  fi
-  endmenu
+   bool 'Network device support' CONFIG_NETDEVICES
+   if [ "$CONFIG_NETDEVICES" = "y" ]; then
+      if [ "$CONFIG_SGI" != "y" -a "$CONFIG_DECSTATION" != "y" -a "$CONFIG_BAGET_MIPS" != "y" ]; then
+	 source drivers/net/Config.in
+      else
+	 tristate '  Dummy net driver support' CONFIG_DUMMY
+	 tristate '  SLIP (serial line) support' CONFIG_SLIP
+	 if [ "$CONFIG_SLIP" != "n" ]; then
+	    bool '    CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
+	    bool '    Keepalive and linefill' CONFIG_SLIP_SMART
+	 fi
+	 tristate '  PPP (point-to-point) support' CONFIG_PPP
+	 if [ ! "$CONFIG_PPP" = "n" ]; then
+	    comment '    CCP compressors for PPP are only built as modules.'
+	 fi
+         if [ "$CONFIG_SGI" = "y" ]; then
+	 bool '  SGI Seeq ethernet controller support' CONFIG_SGISEEQ
+      fi
+	 if [ "$CONFIG_DECSTATION" = "y" ]; then
+            bool '  DEC LANCE ethernet controller support' CONFIG_DECLANCE
+         fi
+	 if [ "$CONFIG_BAGET_MIPS" = "y" ]; then
+	    tristate '  Baget AMD LANCE support' CONFIG_BAGETLANCE
+	    tristate '  Baget Backplane Shared Memory support' CONFIG_BAGETBSM
+	 fi
+      fi
+   fi
+   endmenu
 fi
 
 if [ "$CONFIG_SGI" != "y" -a "$CONFIG_DECSTATION" != "y" -a "$CONFIG_BAGET_MIPS" != "y" ]; then
-  source drivers/net/hamradio/Config.in
+   source drivers/net/hamradio/Config.in
 
 
-  mainmenu_option next_comment
-  comment 'ISDN subsystem'
+   mainmenu_option next_comment
+   comment 'ISDN subsystem'
 
-  if [ "$CONFIG_NET" != "n" ]; then
-    tristate 'ISDN support' CONFIG_ISDN
-    if [ "$CONFIG_ISDN" != "n" ]; then
-      source drivers/isdn/Config.in
-    fi
-  fi
-  endmenu
+   if [ "$CONFIG_NET" != "n" ]; then
+      tristate 'ISDN support' CONFIG_ISDN
+      if [ "$CONFIG_ISDN" != "n" ]; then
+	 source drivers/isdn/Config.in
+      fi
+   fi
+   endmenu
 
 
-  mainmenu_option next_comment
-  comment comment 'Old CD-ROM drivers (not SCSI, not IDE)'
+   mainmenu_option next_comment
+   comment comment 'Old CD-ROM drivers (not SCSI, not IDE)'
 
-  bool 'Support non-SCSI/IDE/ATAPI drives' CONFIG_CD_NO_IDESCSI
-  if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
-    source drivers/cdrom/Config.in
-  fi
-  endmenu
+   bool 'Support non-SCSI/IDE/ATAPI drives' CONFIG_CD_NO_IDESCSI
+   if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
+      source drivers/cdrom/Config.in
+   fi
+   endmenu
 fi
 
 if [ "$CONFIG_DECSTATION" != "y" ]; then
-  source drivers/char/Config.in
+   source drivers/char/Config.in
 else
-  mainmenu_option next_comment
-  comment 'DECstation Character devices'
+   mainmenu_option next_comment
+   comment 'DECstation Character devices'
 
-  bool 'Virtual terminal' CONFIG_VT
-  if [ "$CONFIG_VT" = "y" ]; then
-    bool 'Support for console on virtual terminal' CONFIG_VT_CONSOLE
-  fi
-  tristate 'Standard/generic (dumb) serial support' CONFIG_SERIAL
-  if [ "$CONFIG_SGI" = "y" ]; then
-    bool 'SGI PROM Console Support' CONFIG_SGI_PROM_CONSOLE
-  fi
-  if [ "$CONFIG_SERIAL" = "y" ]; then
-    bool 'DZ11 Serial Support' CONFIG_DZ
-    if [ "$CONFIG_TC" = "y" ]; then
-      bool 'Z85C30 Serial Support' CONFIG_ZS
-    fi
-    bool '   Support for console on serial port' CONFIG_SERIAL_CONSOLE
-  fi
-  bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
-  if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
-    int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
-  fi
-  bool 'Keyboard Support' CONFIG_KEYBOARD
-  bool 'Mouse Support' CONFIG_MOUSE
-#    bool 'Enhanced Real Time Clock Support' CONFIG_RTC
-  endmenu
+   bool 'Virtual terminal' CONFIG_VT
+   if [ "$CONFIG_VT" = "y" ]; then
+      bool '  Support for console on virtual terminal' CONFIG_VT_CONSOLE
+   fi
+   if [ "$CONFIG_SGI" = "y" ]; then
+      bool 'SGI PROM Console Support' CONFIG_SGI_PROM_CONSOLE
+   fi
+   tristate 'Standard/generic (dumb) serial support' CONFIG_SERIAL
+   if [ "$CONFIG_SERIAL" = "y" ]; then
+      bool '  DZ11 Serial Support' CONFIG_DZ
+      if [ "$CONFIG_TC" = "y" ]; then
+	 bool '  Z85C30 Serial Support' CONFIG_ZS
+      fi
+      bool '  Support for console on serial port' CONFIG_SERIAL_CONSOLE
+   fi
+   bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
+   if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
+      int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
+   fi
+   bool 'Keyboard Support' CONFIG_KEYBOARD
+   bool 'Mouse Support' CONFIG_MOUSE
+#   bool 'Enhanced Real Time Clock Support' CONFIG_RTC
+   endmenu
 fi
 
 source drivers/usb/Config.in
@@ -255,36 +251,36 @@
 source fs/Config.in
 
 if [ "$CONFIG_VT" = "y" ]; then
-  mainmenu_option next_comment
-  comment 'Console drivers'
-  if [ "$CONFIG_SGI" = "y" ]; then
-    tristate 'SGI Newport Console support' CONFIG_SGI_NEWPORT_CONSOLE
-    if [ "$CONFIG_SGI_NEWPORT_CONSOLE" != "y" ]; then
-      define_bool CONFIG_DUMMY_CONSOLE y
-    fi
-  else
-    if [ "$CONFIG_DECSTATION" != "y" ]; then
-    bool 'VGA text console' CONFIG_VGA_CONSOLE
-    fi
-    bool 'Support for frame buffer devices' CONFIG_FB
-    source drivers/video/Config.in
-  fi
-  endmenu
+   mainmenu_option next_comment
+   comment 'Console drivers'
+   if [ "$CONFIG_SGI" = "y" ]; then
+      tristate 'SGI Newport Console support' CONFIG_SGI_NEWPORT_CONSOLE
+      if [ "$CONFIG_SGI_NEWPORT_CONSOLE" != "y" ]; then
+         define_bool CONFIG_DUMMY_CONSOLE y
+      fi
+   else
+      if [ "$CONFIG_DECSTATION" != "y" ]; then
+	 bool 'VGA text console' CONFIG_VGA_CONSOLE
+      fi
+      bool 'Support for frame buffer devices' CONFIG_FB
+	 source drivers/video/Config.in
+      fi
+   endmenu
 fi
 
 if [ "$CONFIG_DECSTATION" != "y" ]; then
-  mainmenu_option next_comment
-  comment 'Sound'
+   mainmenu_option next_comment
+   comment 'Sound'
 
-  tristate 'Sound card support' CONFIG_SOUND
-  if [ "$CONFIG_SOUND" != "n" ]; then
-  source drivers/sound/Config.in
-  fi
-  endmenu
+   tristate 'Sound card support' CONFIG_SOUND
+   if [ "$CONFIG_SOUND" != "n" ]; then
+      source drivers/sound/Config.in
+   fi
+   endmenu
 fi
 
 if [ "$CONFIG_SGI" = "y" ]; then
-  source drivers/sgi/Config.in
+   source drivers/sgi/Config.in
 fi
 
 mainmenu_option next_comment
@@ -293,10 +289,10 @@
 #bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
 bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
 if [ "$CONFIG_MODULES" = "y" ]; then
-  bool ' Build fp execption handler module' CONFIG_MIPS_FPE_MODULE
+   bool ' Build fp execption handler module' CONFIG_MIPS_FPE_MODULE
 fi
 if [ "$CONFIG_SERIAL" = "y" ]; then
-  bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
+   bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
 fi
 bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
 endmenu
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)