patch-2.3.22 linux/include/linux/pmu.h
Next file: linux/include/linux/ppp_channel.h
Previous file: linux/include/linux/pci_ids.h
Back to the patch index
Back to the overall index
- Lines: 136
- Date:
Tue Oct 12 10:00:58 1999
- Orig file:
v2.3.21/linux/include/linux/pmu.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.21/linux/include/linux/pmu.h linux/include/linux/pmu.h
@@ -0,0 +1,135 @@
+/*
+ * Definitions for talking to the PMU. The PMU is a microcontroller
+ * which controls battery charging and system power on PowerBook 3400
+ * and 2400 models as well as the RTC and various other things.
+ *
+ * Copyright (C) 1998 Paul Mackerras.
+ */
+
+#include <linux/config.h>
+/*
+ * PMU commands
+ */
+#define PMU_POWER_CTRL 0x11 /* control power of some devices */
+#define PMU_ADB_CMD 0x20 /* send ADB packet */
+#define PMU_ADB_POLL_OFF 0x21 /* disable ADB auto-poll */
+#define PMU_WRITE_NVRAM 0x33 /* write non-volatile RAM */
+#define PMU_READ_NVRAM 0x3b /* read non-volatile RAM */
+#define PMU_SET_RTC 0x30 /* set real-time clock */
+#define PMU_READ_RTC 0x38 /* read real-time clock */
+#define PMU_SET_VOLBUTTON 0x40 /* set volume up/down position */
+#define PMU_BACKLIGHT_BRIGHT 0x41 /* set backlight brightness */
+#define PMU_GET_VOLBUTTON 0x48 /* get volume up/down position */
+#define PMU_PCEJECT 0x4c /* eject PC-card from slot */
+#define PMU_BATTERY_STATE 0x6b /* report battery state etc. */
+#define PMU_SET_INTR_MASK 0x70 /* set PMU interrupt mask */
+#define PMU_INT_ACK 0x78 /* read interrupt bits */
+#define PMU_SHUTDOWN 0x7e /* turn power off */
+#define PMU_SLEEP 0x7f /* put CPU to sleep */
+#define PMU_RESET 0xd0 /* reset CPU */
+#define PMU_GET_BRIGHTBUTTON 0xd9 /* report brightness up/down pos */
+#define PMU_GET_COVER 0xdc /* report cover open/closed */
+
+/* Bits to use with the PMU_POWER_CTRL command */
+#define PMU_POW_ON 0x80 /* OR this to power ON the device */
+#define PMU_POW_OFF 0x00 /* leave bit 7 to 0 to power it OFF */
+#define PMU_POW_BACKLIGHT 0x01 /* backlight power */
+#define PMU_POW_IRLED 0x04 /* IR led power (on wallstreet) */
+
+/* Bits in PMU interrupt and interrupt mask bytes */
+#define PMU_INT_ADB_AUTO 0x04 /* ADB autopoll, when PMU_INT_ADB */
+#define PMU_INT_PCEJECT 0x04 /* PC-card eject buttons */
+#define PMU_INT_SNDBRT 0x08 /* sound/brightness up/down buttons */
+#define PMU_INT_ADB 0x10 /* ADB autopoll or reply data */
+#define PMU_INT_BATTERY 0x20
+#define PMU_INT_WAKEUP 0x40
+#define PMU_INT_TICK 0x80 /* 1-second tick interrupt */
+
+/* Kind of PMU (model) */
+enum {
+ PMU_UNKNOWN,
+ PMU_OHARE_BASED, /* 2400, 3400, 3500 (old G3 powerbook) */
+ PMU_HEATHROW_BASED, /* PowerBook G3 series */
+ PMU_PADDINGTON_BASED, /* 1999 PowerBook G3 */
+};
+
+/*
+ * Ioctl commands for the /dev/pmu device
+ */
+#include <linux/ioctl.h>
+
+/* no param */
+#define PMU_IOC_SLEEP _IO('B', 0)
+/* out param: u32* backlight value: 0 to 31 */
+#define PMU_IOC_GET_BACKLIGHT _IOR('B', 1, sizeof(__u32*))
+/* in param: u32 backlight value: 0 to 31 */
+#define PMU_IOC_SET_BACKLIGHT _IOW('B', 2, sizeof(__u32))
+/* out param: u32* backlight value: 0 to 31 */
+#define PMU_IOC_GET_MODEL _IOR('B', 3, sizeof(__u32*))
+
+#ifdef __KERNEL__
+
+int find_via_pmu(void);
+int via_pmu_init(void);
+
+int pmu_request(struct adb_request *req,
+ void (*done)(struct adb_request *), int nbytes, ...);
+void pmu_poll(void);
+
+void pmu_enable_backlight(int on);
+void pmu_set_brightness(int level);
+
+void pmu_enable_irled(int on);
+
+void pmu_restart(void);
+void pmu_shutdown(void);
+
+int pmu_present(void);
+int pmu_get_model(void);
+
+#ifdef CONFIG_PMAC_PBOOK
+/*
+ * Stuff for putting the powerbook to sleep and waking it again.
+ *
+ */
+#include <linux/list.h>
+
+struct pmu_sleep_notifier
+{
+ int (*notifier_call)(struct pmu_sleep_notifier *self, int when);
+ int priority;
+ struct list_head list;
+};
+
+/* Code values for calling sleep/wakeup handlers
+ *
+ * Note: If a sleep request got cancelled, all drivers will get
+ * the PBOOK_SLEEP_REJECT, even those who didn't get the PBOOK_SLEEP_REQUEST.
+ */
+#define PBOOK_SLEEP_REQUEST 1
+#define PBOOK_SLEEP_NOW 2
+#define PBOOK_SLEEP_REJECT 3
+#define PBOOK_WAKE 4
+
+/* Result codes returned by the notifiers */
+#define PBOOK_SLEEP_OK 0
+#define PBOOK_SLEEP_REFUSE -1
+
+/* priority levels in notifiers */
+#define SLEEP_LEVEL_VIDEO 100 /* Video driver (first wake) */
+#define SLEEP_LEVEL_SOUND 90 /* Sound driver */
+#define SLEEP_LEVEL_MEDIABAY 80 /* Media bay driver */
+#define SLEEP_LEVEL_BLOCK 70 /* IDE, SCSI */
+#define SLEEP_LEVEL_NET 60 /* bmac */
+#define SLEEP_LEVEL_ADB 50 /* ADB */
+#define SLEEP_LEVEL_MISC 30 /* Anything */
+#define SLEEP_LEVEL_LAST 0 /* Anything */
+
+/* special register notifier functions */
+int pmu_register_sleep_notifier(struct pmu_sleep_notifier* notifier);
+int pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* notifier);
+
+#endif /* CONFIG_PMAC_PBOOK */
+
+
+#endif /* __KERNEL */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)