patch-2.3.25 linux/arch/sparc/config.in

• Lines: 281
• Date: Mon Nov 1 10:31:28 1999
• Orig file: v2.3.24/linux/arch/sparc/config.in
• Orig date: Tue Aug 31 17:29:13 1999

diff -u --recursive --new-file v2.3.24/linux/arch/sparc/config.in linux/arch/sparc/config.in
@@ -10,62 +10,55 @@
 endmenu
 
 mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
-  bool 'Kernel module loader' CONFIG_KMOD
-fi
-endmenu
-
-mainmenu_option next_comment
 comment 'General setup'
 
 define_bool CONFIG_VT y
 define_bool CONFIG_VT_CONSOLE y
 
-bool 'Support for AP1000 multicomputer' CONFIG_AP1000
 bool 'Symmetric multi-processing support (does not work on sun4/sun4c)' CONFIG_SMP
 
+bool 'Support for AP1000 multicomputer' CONFIG_AP1000
 if [ "$CONFIG_AP1000" = "y" ]; then
-	define_bool CONFIG_NO_KEYBOARD y
-	define_bool CONFIG_FDDI y
-	define_bool CONFIG_APFDDI y
-	define_bool CONFIG_APBLOCK y
-	define_bool CONFIG_APBIF y
-	tristate 'OPIU DDV Driver' CONFIG_DDV
+   define_bool CONFIG_NO_KEYBOARD y
+   define_bool CONFIG_FDDI y
+   define_bool CONFIG_APFDDI y
+   define_bool CONFIG_APBLOCK y
+   define_bool CONFIG_APBIF y
+   tristate '  OPIU DDV Driver' CONFIG_DDV
 else
-	bool 'Support for SUN4 machines (disables SUN4[CDM] support)' CONFIG_SUN4
-	if [ "$CONFIG_SUN4" != "y" ]; then
-		bool 'Support for PCI and PS/2 keyboard/mouse' CONFIG_PCI
-	fi
-
-	mainmenu_option next_comment
-	comment 'Console drivers'
-	bool 'PROM console' CONFIG_PROM_CONSOLE
-	bool 'Support Frame buffer devices' CONFIG_FB
-	source drivers/video/Config.in
-	endmenu
-
-	# Global things across all Sun machines.
-	define_bool CONFIG_SBUS y
-	define_bool CONFIG_SBUSCHAR y
-	define_bool CONFIG_BUSMOUSE y
-	define_bool CONFIG_SUN_MOUSE y
-	define_bool CONFIG_SERIAL y
-	define_bool CONFIG_SUN_SERIAL y
-	define_bool CONFIG_SERIAL_CONSOLE y
-	define_bool CONFIG_SUN_KEYBOARD y
-	define_bool CONFIG_SUN_CONSOLE y
-	define_bool CONFIG_SUN_AUXIO y
-	define_bool CONFIG_SUN_IO y
-	if [ "$CONFIG_SUN4" != "y" ]; then
-		source drivers/sbus/char/Config.in
-		source drivers/sbus/audio/Config.in
-	fi
+   bool 'Support for SUN4 machines (disables SUN4[CDM] support)' CONFIG_SUN4
+   if [ "$CONFIG_SUN4" != "y" ]; then
+      bool '  Support for PCI and PS/2 keyboard/mouse' CONFIG_PCI
+   fi
+
+   mainmenu_option next_comment
+   comment 'Console drivers'
+   bool 'PROM console' CONFIG_PROM_CONSOLE
+   bool 'Support Frame buffer devices' CONFIG_FB
+   source drivers/video/Config.in
+   endmenu
+
+   # Global things across all Sun machines.
+   define_bool CONFIG_SBUS y
+   define_bool CONFIG_SBUSCHAR y
+   define_bool CONFIG_BUSMOUSE y
+   define_bool CONFIG_SUN_MOUSE y
+   define_bool CONFIG_SERIAL y
+   define_bool CONFIG_SUN_SERIAL y
+   define_bool CONFIG_SERIAL_CONSOLE y
+   define_bool CONFIG_SUN_KEYBOARD y
+   define_bool CONFIG_SUN_CONSOLE y
+   define_bool CONFIG_SUN_AUXIO y
+   define_bool CONFIG_SUN_IO y
+   if [ "$CONFIG_SUN4" != "y" ]; then
+      source drivers/sbus/char/Config.in
+      source drivers/sbus/audio/Config.in
+   fi
 fi
 
-tristate 'Openprom tree appears in /proc/openprom (EXPERIMENTAL)' CONFIG_SUN_OPENPROMFS
+if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+   tristate 'Openprom tree appears in /proc/openprom (EXPERIMENTAL)' CONFIG_SUN_OPENPROMFS
+fi
 bool 'Networking support' CONFIG_NET
 bool 'System V IPC' CONFIG_SYSVIPC
 bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
@@ -78,21 +71,30 @@
 endmenu
 
 mainmenu_option next_comment
+comment 'Loadable module support'
+bool 'Enable loadable module support' CONFIG_MODULES
+if [ "$CONFIG_MODULES" = "y" ]; then
+   bool '  Set version information on all symbols for modules' CONFIG_MODVERSIONS
+   bool '  Kernel module loader' CONFIG_KMOD
+fi
+endmenu
+
+mainmenu_option next_comment
 comment 'Floppy, IDE, and other block devices'
 
 bool 'Normal floppy disk support' CONFIG_BLK_DEV_FD
 
 bool 'Multiple devices driver support' CONFIG_BLK_DEV_MD
 if [ "$CONFIG_BLK_DEV_MD" = "y" ]; then
-  tristate '   Linear (append) mode' CONFIG_MD_LINEAR
-  tristate '   RAID-0 (striping) mode' CONFIG_MD_STRIPED
-  tristate '   RAID-1 (mirroring) mode' CONFIG_MD_MIRRORING
-  tristate '   RAID-4/RAID-5 mode' CONFIG_MD_RAID5
+   tristate '  Linear (append) mode' CONFIG_MD_LINEAR
+   tristate '  RAID-0 (striping) mode' CONFIG_MD_STRIPED
+   tristate '  RAID-1 (mirroring) mode' CONFIG_MD_MIRRORING
+   tristate '  RAID-4/RAID-5 mode' CONFIG_MD_RAID5
 fi
 
 tristate 'RAM disk support' CONFIG_BLK_DEV_RAM
 if [ "$CONFIG_BLK_DEV_RAM" = "y" ]; then
-  bool '   Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD
+   bool '  Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD
 fi
 
 tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
@@ -101,7 +103,7 @@
 endmenu
 
 if [ "$CONFIG_NET" = "y" ]; then
-	source net/Config.in
+   source net/Config.in
 fi
 
 mainmenu_option next_comment
@@ -109,7 +111,7 @@
 
 tristate 'ISDN support' CONFIG_ISDN
 if [ "$CONFIG_ISDN" != "n" ]; then
-  source drivers/isdn/Config.in
+   source drivers/isdn/Config.in
 fi
 endmenu
 
@@ -119,65 +121,65 @@
 tristate 'SCSI support' CONFIG_SCSI
 
 if [ "$CONFIG_SCSI" != "n" ]; then
-	comment 'SCSI support type (disk, tape, CDrom)'
+   comment 'SCSI support type (disk, tape, CDrom)'
 
-	dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
-	dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
-	dep_tristate 'SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
-	if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
-	  bool '  Enable vendor-specific extensions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
-	fi
-	dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI
+   dep_tristate '  SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
+   dep_tristate '  SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
+   dep_tristate '  SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
+   if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
+      bool '    Enable vendor-specific extensions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
+   fi
+   dep_tristate '  SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI
 
-	comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
+   comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
 
-	bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN
+   bool '  Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN
 
-	bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS
+   bool '  Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS
 
-	mainmenu_option next_comment
-	comment 'SCSI low-level drivers'
+   mainmenu_option next_comment
+   comment 'SCSI low-level drivers'
 
-	bool 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
-	tristate 'PTI Qlogic,ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI
-	endmenu
+   bool 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
+   tristate 'PTI Qlogic,ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI
+   endmenu
 fi
 endmenu
 
 source drivers/fc4/Config.in
 
 if [ "$CONFIG_NET" = "y" ]; then
-	mainmenu_option next_comment
-	comment 'Network device support'
+   mainmenu_option next_comment
+   comment 'Network device support'
 
-	bool 'Network device support' CONFIG_NETDEVICES
-	if [ "$CONFIG_NETDEVICES" = "y" ]; then
-		tristate 'Dummy net driver support' CONFIG_DUMMY
-		tristate 'PPP (point-to-point) support' CONFIG_PPP
-		if [ ! "$CONFIG_PPP" = "n" ]; then
-		   comment 'CCP compressors for PPP are only built as modules.'
-		fi
-		tristate 'SLIP (serial line) support' CONFIG_SLIP
-		if [ "$CONFIG_SLIP" != "n" ]; then
-		  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
-		  bool ' Keepalive and linefill' CONFIG_SLIP_SMART
-		  bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
-		fi
-		tristate 'Sun LANCE support' CONFIG_SUNLANCE
-		tristate 'Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL
-		if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-		  tristate 'Sun BigMAC 10/100baseT support' CONFIG_SUNBMAC
-		fi
-		tristate 'Sun QuadEthernet support' CONFIG_SUNQE
-		tristate 'MyriCOM Gigabit Ethernet support' CONFIG_MYRI_SBUS
-#		bool 'FDDI driver support' CONFIG_FDDI
-#		if [ "$CONFIG_FDDI" = "y" ]; then
-#		fi
-		if [ "$CONFIG_ATM" = "y" ]; then
-		  source drivers/atm/Config.in
-		fi
-	fi
-	endmenu
+   bool 'Network device support' CONFIG_NETDEVICES
+   if [ "$CONFIG_NETDEVICES" = "y" ]; then
+      tristate '  Dummy net driver support' CONFIG_DUMMY
+      tristate '  PPP (point-to-point) support' CONFIG_PPP
+      if [ ! "$CONFIG_PPP" = "n" ]; then
+	 comment 'CCP compressors for PPP are only built as modules.'
+      fi
+      tristate '  SLIP (serial line) support' CONFIG_SLIP
+      if [ "$CONFIG_SLIP" != "n" ]; then
+	 bool '    CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
+	 bool '    Keepalive and linefill' CONFIG_SLIP_SMART
+	 bool '    Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
+      fi
+      tristate '  Sun LANCE support' CONFIG_SUNLANCE
+      tristate '  Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL
+      if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+	 tristate '  Sun BigMAC 10/100baseT support (EXPERIMENTAL)' CONFIG_SUNBMAC
+      fi
+      tristate '  Sun QuadEthernet support' CONFIG_SUNQE
+      tristate '  MyriCOM Gigabit Ethernet support' CONFIG_MYRI_SBUS
+#      bool '  FDDI driver support' CONFIG_FDDI
+#      if [ "$CONFIG_FDDI" = "y" ]; then
+#      fi
+      if [ "$CONFIG_ATM" = "y" ]; then
+	 source drivers/atm/Config.in
+      fi
+   fi
+   endmenu
 fi
 
 # This one must be before the filesystem configs. -DaveM
@@ -185,7 +187,7 @@
 comment 'Unix98 PTY support'
 bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
 if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
-	int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
+   int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
 fi
 endmenu
 
@@ -202,4 +204,3 @@
 
 bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
 endmenu
-