patch-2.3.34 linux/Documentation/video4linux/bttv/CARDS

• Lines: 115
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.3.33/linux/Documentation/video4linux/bttv/CARDS
• Orig date: Wed Oct 27 16:34:12 1999

diff -u --recursive --new-file v2.3.33/linux/Documentation/video4linux/bttv/CARDS linux/Documentation/video4linux/bttv/CARDS
@@ -1,114 +0,0 @@
-Suppported cards:
-
-
-Bt848/Bt848a/Bt849/Bt878/Bt879 cards
-------------------------------------
-
-All cards with Bt848/Bt848a/Bt849/Bt878/Bt879 and normal Composite/S-VHS inputs
-are supported.
-Teletext and Intercast support (PAL only) via VBI samples decoding in software.
-
-Some cards with additional multiplexing of inputs are only partially 
-supported (unless specifications by the card manufacturer are given).
-
-All other cards only differ by additional components as tuners, sound decoders,
-EEPROMs, teletext decoders ...
-
-Tuner and sound decoder support for Bt878/879 is not fully working yet.
-
-
-MATRIX Vision
--------------
-
-MV-Delta
-- Bt848A
-- 4 Composite inputs, 1 S-VHS input (shared with 4th composite)
-- EEPROM
-
-http://www.matrix-vision.de/
-
-This card has no tuner but supports all 4 composite (1 shared with an
-S-VHS input) of the Bt848A.
-Very nice card if you only have satellite TV but several tuners connected
-to the card via composite.
-
-Many thanks to Matrix-Vision for giving us 2 cards for free which made
-Bt848a/Bt849 single crytal operation support possible!!!
-
-
-
-Miro/Pinnacle PCTV
-------------------
-
-- Bt848 
-  some (all??) come with 2 crystals for PAL/SECAM and NTSC 
-- PAL, SECAM or NTSC TV tuner (Philips or TEMIC)
-- MSP34xx sound decoder on add on board
-  decoder is supported but AFAIK does not yet work 
-  (other sound MUX setting in GPIO port needed??? somebody who fixed this???)
-- 1 tuner, 1 composite and 1 S-VHS input
-- tuner type is autodetected
-
-http://www.miro.de/
-http://www.miro.com/
-
-
-Many thanks for the free card which made first NTSC support possible back
-in 1997!
-
-
-Hauppauge Win/TV pci
---------------------
-
-There are many different versions of the Hauppauge cards with different 
-tuners (TV+Radio ...), teletext decoders.
-Note that even cards with same model numbers have (depending on the revision)
-different chips on it.
-
-- Bt848 (and others but always in 2 crystal operation???)
-  newer cards have a Bt878, I2C support for it is still experimental 
-- PAL, SECAM, NTSC or tuner with or without Radio support
-
-e.g.:
-  PAL: 
-  TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
-  TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
-  
-  NTSC:
-  TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
-  TSA5518: no datasheet available on Philips site
-- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip	
-  with buffer RAM (e.g. Winbond W24257AS-35: 32Kx8 CMOS static RAM)
-  SAA5246 (I2C 0x22) is supported
-- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y 
-  with configuration information
-  I2C address 0xa0 (24LC02B also responds to 0xa2-0xaf)
-- 1 tuner, 1 composite and (depending on model) 1 S-VHS input
-- 14052B: mux for selection of sound source
-- sound decoder: TDA9800, MSP34xx (stereo cards) 
-
-
-AverMedia
----------
-...
-
-
-ADS Channel Surfer
-------------------
-...
-
-
-Maxi TV Video PCI 2 card
-------------------------
-...
-
-
-Image World ConferenceTV
-------------------------
-Doesn't work:
-	- autodetect. Use card=21
-	- sound mute. Use the line-in volume of your soundcard
-	- radio tuner.  Since the card doesn't have an antenna, it is quite
-          understandable ;)  However, you can hear some stations if you
-	  ``ln -s /dev/bttv0 /dev/radio''
-	 =20