patch-2.3.34 linux/drivers/usb/ohci-root-hub.h

Next file: linux/drivers/usb/ohci.c
Previous file: linux/drivers/usb/ohci-root-hub.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.33/linux/drivers/usb/ohci-root-hub.h linux/drivers/usb/ohci-root-hub.h
@@ -1,71 +0,0 @@
-/*
- * HCD (OHCI) Virtual Root Hub Protocol for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber (weissg@vienna.at)
- *
- * The Root Hub is build into the HC (UHCI or OHCI) hardware. 
- * This piece of code lets it look like it resides on the bus 
- * like the other hubs.
- * (for anyone who wants to do a control operation on the root hub)
- *  
- * v1.0 1999/04/27
- * ohci-root-hub.h
- *  
- */
- 
-/* destination of request */
-#define RH_INTERFACE               0x01
-#define RH_ENDPOINT                0x02
-#define RH_OTHER                   0x03
-
-#define RH_CLASS                   0x20
-#define RH_VENDOR                  0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS           0x0080
-#define RH_CLEAR_FEATURE        0x0100
-#define RH_SET_FEATURE          0x0300
-#define RH_SET_ADDRESS			0x0500
-#define RH_GET_DESCRIPTOR		0x0680
-#define RH_SET_DESCRIPTOR       0x0700
-#define RH_GET_CONFIGURATION	0x0880
-#define RH_SET_CONFIGURATION	0x0900
-#define RH_GET_STATE            0x0280
-#define RH_GET_INTERFACE        0x0A80
-#define RH_SET_INTERFACE        0x0B00
-#define RH_SYNC_FRAME           0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP               0x2000
-
-
-/* Hub port features */
-#define RH_PORT_CONNECTION         0x00
-#define RH_PORT_ENABLE             0x01
-#define RH_PORT_SUSPEND            0x02
-#define RH_PORT_OVER_CURRENT       0x03
-#define RH_PORT_RESET              0x04
-#define RH_PORT_POWER              0x08
-#define RH_PORT_LOW_SPEED          0x09
-#define RH_C_PORT_CONNECTION       0x10
-#define RH_C_PORT_ENABLE           0x11
-#define RH_C_PORT_SUSPEND          0x12
-#define RH_C_PORT_OVER_CURRENT     0x13
-#define RH_C_PORT_RESET            0x14  
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER       0x00
-#define RH_C_HUB_OVER_CURRENT      0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP    0x00
-#define RH_ENDPOINT_STALL          0x01
-
-/* Our Vendor Specific feature */
-#define RH_REMOVE_EP               0x00
-
-
-#define RH_ACK                     0x01
-#define RH_REQ_ERR                 -1
-#define RH_NACK                    0x00
- 
-#define min(a,b) (((a)<(b))?(a):(b))  
- 

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)