patch-2.3.48 linux/drivers/atm/fore200e.h
Next file: linux/drivers/atm/fore200e_firmware_copyright
Previous file: linux/drivers/atm/fore200e.c
Back to the patch index
Back to the overall index
- Lines: 953
- Date:
Mon Feb 21 16:32:27 2000
- Orig file:
v2.3.47/linux/drivers/atm/fore200e.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.47/linux/drivers/atm/fore200e.h linux/drivers/atm/fore200e.h
@@ -0,0 +1,952 @@
+#ifndef _FORE200E_H
+#define _FORE200E_H
+
+#ifdef __KERNEL__
+
+/* rx buffer sizes */
+
+#define SMALL_BUFFER_SIZE 384 /* size of small buffers (multiple of 48 (PCA) and 64 (SBA) bytes) */
+#define LARGE_BUFFER_SIZE 4032 /* size of large buffers (multiple of 48 (PCA) and 64 (SBA) bytes) */
+
+
+#define RBD_BLK_SIZE 32 /* nbr of supplied rx buffers per rbd */
+
+
+#define MAX_PDU_SIZE 65535 /* maximum PDU size supported by AALs */
+
+
+#define BUFFER_S1_SIZE SMALL_BUFFER_SIZE /* size of small buffers, scheme 1 */
+#define BUFFER_L1_SIZE LARGE_BUFFER_SIZE /* size of large buffers, scheme 1 */
+
+#define BUFFER_S2_SIZE SMALL_BUFFER_SIZE /* size of small buffers, scheme 2 */
+#define BUFFER_L2_SIZE LARGE_BUFFER_SIZE /* size of large buffers, scheme 2 */
+
+#define BUFFER_S1_NBR (RBD_BLK_SIZE * 2)
+#define BUFFER_L1_NBR (RBD_BLK_SIZE * 2)
+
+#define BUFFER_S2_NBR (RBD_BLK_SIZE * 2)
+#define BUFFER_L2_NBR (RBD_BLK_SIZE * 2)
+
+
+#define QUEUE_SIZE_CMD 16 /* command queue capacity */
+#define QUEUE_SIZE_RX 64 /* receive queue capacity */
+#define QUEUE_SIZE_TX 256 /* transmit queue capacity */
+#define QUEUE_SIZE_BS 16 /* buffer supply queue capacity */
+
+#define NBR_CONNECT 1024 /* number of ATM connections */
+
+
+#define TSD_FIXED 2
+#define TSD_EXTENSION 0
+#define TSD_NBR (TSD_FIXED + TSD_EXTENSION)
+
+
+/* the cp starts putting a received PDU into one *small* buffer,
+ then it uses a number of *large* buffers for the trailing data.
+ we compute here the total number of receive segment descriptors
+ required to hold the largest possible PDU */
+
+#define RSD_REQUIRED (((MAX_PDU_SIZE - SMALL_BUFFER_SIZE + LARGE_BUFFER_SIZE) / LARGE_BUFFER_SIZE) + 1)
+
+#define RSD_FIXED 3
+
+/* RSD_REQUIRED receive segment descriptors are enough to describe a max-sized PDU,
+ but we have to keep the size of the receive PDU descriptor multiple of 32 bytes,
+ so we add one extra RSD to RSD_EXTENSION
+ (WARNING: THIS MAY CHANGE IF BUFFER SIZES ARE MODIFIED) */
+
+#define RSD_EXTENSION ((RSD_REQUIRED - RSD_FIXED) + 1)
+#define RSD_NBR (RSD_FIXED + RSD_EXTENSION)
+
+
+#define FORE200E_DEV(d) ((struct fore200e*)((d)->dev_data))
+#define FORE200E_VCC(d) ((struct fore200e_vcc*)((d)->dev_data))
+
+/* bitfields endian games */
+
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+#define BITFIELD2(b1, b2) b1; b2;
+#define BITFIELD3(b1, b2, b3) b1; b2; b3;
+#define BITFIELD4(b1, b2, b3, b4) b1; b2; b3; b4;
+#define BITFIELD5(b1, b2, b3, b4, b5) b1; b2; b3; b4; b5;
+#define BITFIELD6(b1, b2, b3, b4, b5, b6) b1; b2; b3; b4; b5; b6;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+#define BITFIELD2(b1, b2) b2; b1;
+#define BITFIELD3(b1, b2, b3) b3; b2; b1;
+#define BITFIELD4(b1, b2, b3, b4) b4; b3; b2; b1;
+#define BITFIELD5(b1, b2, b3, b4, b5) b5; b4; b3; b2; b1;
+#define BITFIELD6(b1, b2, b3, b4, b5, b6) b6; b5; b4; b3; b2; b1;
+#else
+#error unknown bitfield endianess
+#endif
+
+
+/* ATM cell header (minus HEC byte) */
+
+typedef struct atm_header {
+ BITFIELD5(
+ u32 clp : 1, /* cell loss priority */
+ u32 plt : 3, /* payload type */
+ u32 vci : 16, /* virtual channel identifier */
+ u32 vpi : 8, /* virtual path identifier */
+ u32 gfc : 4 /* generic flow control */
+ )
+} atm_header_t;
+
+
+/* ATM adaptation layer id */
+
+typedef enum fore200e_aal {
+ FORE200E_AAL0 = 0,
+ FORE200E_AAL34 = 4,
+ FORE200E_AAL5 = 5,
+} fore200e_aal_t;
+
+
+/* transmit PDU descriptor specification */
+
+typedef struct tpd_spec {
+ BITFIELD4(
+ u32 length : 16, /* total PDU length */
+ u32 nseg : 8, /* number of transmit segments */
+ enum fore200e_aal aal : 4, /* adaptation layer */
+ u32 intr : 4 /* interrupt requested */
+ )
+} tpd_spec_t;
+
+
+/* transmit PDU rate control */
+
+typedef struct tpd_rate
+{
+ BITFIELD2(
+ u32 idle_cells : 16, /* number of idle cells to insert */
+ u32 data_cells : 16 /* number of data cells to transmit */
+ )
+} tpd_rate_t;
+
+
+/* transmit segment descriptor */
+
+typedef struct tsd {
+ u32 buffer; /* transmit buffer DMA address */
+ u32 length; /* number of bytes in buffer */
+} tsd_t;
+
+
+/* transmit PDU descriptor */
+
+typedef struct tpd {
+ struct atm_header atm_header; /* ATM header minus HEC byte */
+ struct tpd_spec spec; /* tpd specification */
+ struct tpd_rate rate; /* tpd rate control */
+ u32 pad; /* reserved */
+ struct tsd tsd[ TSD_NBR ]; /* transmit segment descriptors */
+} tpd_t;
+
+
+/* receive segment descriptor */
+
+typedef struct rsd {
+ u32 handle; /* host supplied receive buffer handle */
+ u32 length; /* number of bytes in buffer */
+} rsd_t;
+
+
+/* receive PDU descriptor */
+
+typedef struct rpd {
+ struct atm_header atm_header; /* ATM header minus HEC byte */
+ u32 nseg; /* number of receive segments */
+ struct rsd rsd[ RSD_NBR ]; /* receive segment descriptors */
+} rpd_t;
+
+
+/* buffer scheme */
+
+typedef enum buffer_scheme {
+ BUFFER_SCHEME_ONE,
+ BUFFER_SCHEME_TWO,
+ BUFFER_SCHEME_NBR /* always last */
+} buffer_scheme_t;
+
+
+/* buffer magnitude */
+
+typedef enum buffer_magn {
+ BUFFER_MAGN_SMALL,
+ BUFFER_MAGN_LARGE,
+ BUFFER_MAGN_NBR /* always last */
+} buffer_magn_t;
+
+
+/* receive buffer descriptor */
+
+typedef struct rbd {
+ u32 handle; /* host supplied handle */
+ u32 buffer_haddr; /* host DMA address of host buffer */
+} rbd_t;
+
+
+/* receive buffer descriptor block */
+
+typedef struct rbd_block {
+ struct rbd rbd[ RBD_BLK_SIZE ]; /* receive buffer descriptor */
+} rbd_block_t;
+
+
+/* tpd DMA address */
+
+typedef struct tpd_haddr {
+ BITFIELD3(
+ u32 size : 4, /* tpd size expressed in 32 byte blocks */
+ u32 pad : 1, /* reserved */
+ u32 haddr : 27 /* tpd DMA addr aligned on 32 byte boundary */
+ )
+} tpd_haddr_t;
+
+
+/* cp resident transmit queue entry */
+
+typedef struct cp_txq_entry {
+ struct tpd_haddr tpd_haddr; /* host DMA address of tpd */
+ u32 status_haddr; /* host DMA address of completion status */
+} cp_txq_entry_t;
+
+
+/* cp resident receive queue entry */
+
+typedef struct cp_rxq_entry {
+ u32 rpd_haddr; /* host DMA address of rpd */
+ u32 status_haddr; /* host DMA address of completion status */
+} cp_rxq_entry_t;
+
+
+/* cp resident buffer supply queue entry */
+
+typedef struct cp_bsq_entry {
+ u32 rbd_block_haddr; /* host DMA address of rbd block */
+ u32 status_haddr; /* host DMA address of completion status */
+} cp_bsq_entry_t;
+
+
+/* completion status */
+
+typedef volatile enum status {
+ STATUS_PENDING = (1<<0), /* initial status (written by host) */
+ STATUS_COMPLETE = (1<<1), /* completion status (written by cp) */
+ STATUS_FREE = (1<<2), /* initial status (written by host) */
+ STATUS_ERROR = (1<<3) /* completion status (written by cp) */
+} status_t;
+
+
+/* cp operation code */
+
+typedef enum opcode {
+ OPCODE_INITIALIZE = 1, /* initialize board */
+ OPCODE_ACTIVATE_VCIN, /* activate incoming VCI */
+ OPCODE_ACTIVATE_VCOUT, /* activate outgoing VCI */
+ OPCODE_DEACTIVATE_VCIN, /* deactivate incoming VCI */
+ OPCODE_DEACTIVATE_VCOUT, /* deactivate incoing VCI */
+ OPCODE_GET_STATS, /* get board statistics */
+ OPCODE_SET_OC3, /* set OC-3 registers */
+ OPCODE_GET_OC3, /* get OC-3 registers */
+ OPCODE_RESET_STATS, /* reset board statistics */
+ OPCODE_GET_PROM, /* get expansion PROM data (PCI specific) */
+ OPCODE_SET_VPI_BITS, /* set x bits of those decoded by the
+ firmware to be low order bits from
+ the VPI field of the ATM cell header */
+ OPCODE_REQUEST_INTR = (1<<7) /* request interrupt */
+} opcode_t;
+
+
+/* virtual path / virtual channel identifers */
+
+typedef struct vpvc {
+ BITFIELD3(
+ u32 vci : 16, /* virtual channel identifier */
+ u32 vpi : 8, /* virtual path identifier */
+ u32 pad : 8 /* reserved */
+ )
+} vpvc_t;
+
+
+/* activate VC command opcode */
+
+typedef struct activate_opcode {
+ BITFIELD4(
+ enum opcode opcode : 8, /* cp opcode */
+ enum fore200e_aal aal : 8, /* adaptation layer */
+ enum buffer_scheme scheme : 8, /* buffer scheme */
+ u32 pad : 8 /* reserved */
+ )
+} activate_opcode_t;
+
+
+/* activate VC command block */
+
+typedef struct activate_block {
+ struct activate_opcode opcode; /* activate VC command opcode */
+ struct vpvc vpvc; /* VPI/VCI */
+ u32 mtu; /* for AAL0 only */
+
+} activate_block_t;
+
+
+/* deactivate VC command opcode */
+
+typedef struct deactivate_opcode {
+ BITFIELD2(
+ enum opcode opcode : 8, /* cp opcode */
+ u32 pad : 24 /* reserved */
+ )
+} deactivate_opcode_t;
+
+
+/* deactivate VC command block */
+
+typedef struct deactivate_block {
+ struct deactivate_opcode opcode; /* deactivate VC command opcode */
+ struct vpvc vpvc; /* VPI/VCI */
+} deactivate_block_t;
+
+
+/* OC-3 registers */
+
+typedef struct oc3_regs {
+ u32 reg[ 128 ]; /* see the PMC Sierra PC5346 S/UNI-155-Lite
+ Saturn User Network Interface documentation
+ for a description of the OC-3 chip registers */
+} oc3_regs_t;
+
+
+/* set/get OC-3 regs command opcode */
+
+typedef struct oc3_opcode {
+ BITFIELD4(
+ enum opcode opcode : 8, /* cp opcode */
+ u32 reg : 8, /* register index */
+ u32 value : 8, /* register value */
+ u32 mask : 8 /* register mask that specifies which
+ bits of the register value field
+ are significant */
+ )
+} oc3_opcode_t;
+
+
+/* set/get OC-3 regs command block */
+
+typedef struct oc3_block {
+ struct oc3_opcode opcode; /* set/get OC-3 regs command opcode */
+ u32 regs_haddr; /* host DMA address of OC-3 regs buffer */
+} oc3_block_t;
+
+
+/* physical encoding statistics */
+
+typedef struct stats_phy {
+ u32 crc_header_errors; /* cells received with bad header CRC */
+ u32 framing_errors; /* cells received with bad framing */
+ u32 pad[ 2 ]; /* i960 padding */
+} stats_phy_t;
+
+
+/* OC-3 statistics */
+
+typedef struct stats_oc3 {
+ u32 section_bip8_errors; /* section 8 bit interleaved parity */
+ u32 path_bip8_errors; /* path 8 bit interleaved parity */
+ u32 line_bip24_errors; /* line 24 bit interleaved parity */
+ u32 line_febe_errors; /* line far end block errors */
+ u32 path_febe_errors; /* path far end block errors */
+ u32 corr_hcs_errors; /* correctable header check sequence */
+ u32 ucorr_hcs_errors; /* uncorrectable header check sequence */
+ u32 pad[ 1 ]; /* i960 padding */
+} stats_oc3_t;
+
+
+/* ATM statistics */
+
+typedef struct stats_atm {
+ u32 cells_transmitted; /* cells transmitted */
+ u32 cells_received; /* cells received */
+ u32 vpi_bad_range; /* cell drops: VPI out of range */
+ u32 vpi_no_conn; /* cell drops: no connection for VPI */
+ u32 vci_bad_range; /* cell drops: VCI out of range */
+ u32 vci_no_conn; /* cell drops: no connection for VCI */
+ u32 pad[ 2 ]; /* i960 padding */
+} stats_atm_t;
+
+/* AAL0 statistics */
+
+typedef struct stats_aal0 {
+ u32 cells_transmitted; /* cells transmitted */
+ u32 cells_received; /* cells received */
+ u32 cells_dropped; /* cells dropped */
+ u32 pad[ 1 ]; /* i960 padding */
+} stats_aal0_t;
+
+
+/* AAL3/4 statistics */
+
+typedef struct stats_aal34 {
+ u32 cells_transmitted; /* cells transmitted from segmented PDUs */
+ u32 cells_received; /* cells reassembled into PDUs */
+ u32 cells_crc_errors; /* payload CRC error count */
+ u32 cells_protocol_errors; /* SAR or CS layer protocol errors */
+ u32 cells_dropped; /* cells dropped: partial reassembly */
+ u32 cspdus_transmitted; /* CS PDUs transmitted */
+ u32 cspdus_received; /* CS PDUs received */
+ u32 cspdus_protocol_errors; /* CS layer protocol errors */
+ u32 cspdus_dropped; /* reassembled PDUs drop'd (in cells) */
+ u32 pad[ 3 ]; /* i960 padding */
+} stats_aal34_t;
+
+
+/* AAL5 statistics */
+
+typedef struct stats_aal5 {
+ u32 cells_transmitted; /* cells transmitted from segmented SDUs */
+ u32 cells_received; /* cells reassembled into SDUs */
+ u32 cells_dropped; /* reassembled PDUs dropped (in cells) */
+ u32 congestion_experienced; /* CRC error and length wrong */
+ u32 cspdus_transmitted; /* CS PDUs transmitted */
+ u32 cspdus_received; /* CS PDUs received */
+ u32 cspdus_crc_errors; /* CS PDUs CRC errors */
+ u32 cspdus_protocol_errors; /* CS layer protocol errors */
+ u32 cspdus_dropped; /* reassembled PDUs dropped */
+ u32 pad[ 3 ]; /* i960 padding */
+} stats_aal5_t;
+
+
+/* auxiliary statistics */
+
+typedef struct stats_aux {
+ u32 small_b1_failed; /* receive BD allocation failures */
+ u32 large_b1_failed; /* receive BD allocation failures */
+ u32 small_b2_failed; /* receive BD allocation failures */
+ u32 large_b2_failed; /* receive BD allocation failures */
+ u32 rpd_alloc_failed; /* receive PDU allocation failures */
+ u32 receive_carrier; /* no carrier = 0, carrier = 1 */
+ u32 pad[ 2 ]; /* i960 padding */
+} stats_aux_t;
+
+
+/* whole statistics buffer */
+
+typedef struct stats {
+ struct stats_phy phy; /* physical encoding statistics */
+ struct stats_oc3 oc3; /* OC-3 statistics */
+ struct stats_atm atm; /* ATM statistics */
+ struct stats_aal0 aal0; /* AAL0 statistics */
+ struct stats_aal34 aal34; /* AAL3/4 statistics */
+ struct stats_aal5 aal5; /* AAL5 statistics */
+ struct stats_aux aux; /* auxiliary statistics */
+} stats_t;
+
+
+/* get statistics command opcode */
+
+typedef struct stats_opcode {
+ BITFIELD2(
+ enum opcode opcode : 8, /* cp opcode */
+ u32 pad : 24 /* reserved */
+ )
+} stats_opcode_t;
+
+
+/* get statistics command block */
+
+typedef struct stats_block {
+ struct stats_opcode opcode; /* get statistics command opcode */
+ u32 stats_haddr; /* host DMA address of stats buffer */
+} stats_block_t;
+
+
+/* expansion PROM data (PCI specific) */
+
+typedef struct prom_data {
+ u32 hw_revision; /* hardware revision */
+ u32 serial_number; /* board serial number */
+ u8 mac_addr[ 8 ]; /* board MAC address */
+} prom_data_t;
+
+
+/* get expansion PROM data command opcode */
+
+typedef struct prom_opcode {
+ BITFIELD2(
+ enum opcode opcode : 8, /* cp opcode */
+ u32 pad : 24 /* reserved */
+ )
+} prom_opcode_t;
+
+
+/* get expansion PROM data command block */
+
+typedef struct prom_block {
+ struct prom_opcode opcode; /* get PROM data command opcode */
+ u32 prom_haddr; /* host DMA address of PROM buffer */
+} prom_block_t;
+
+
+/* cp command */
+
+typedef union cmd {
+ enum opcode opcode; /* operation code */
+ struct activate_block activate_block; /* activate VC */
+ struct deactivate_block deactivate_block; /* deactivate VC */
+ struct stats_block stats_block; /* get statistics */
+ struct prom_block prom_block; /* get expansion PROM data */
+ struct oc3_block oc3_block; /* get/set OC-3 registers */
+ u32 pad[ 4 ]; /* i960 padding */
+} cmd_t;
+
+
+/* cp resident command queue */
+
+typedef struct cp_cmdq_entry {
+ union cmd cmd; /* command */
+ u32 status_haddr; /* host DMA address of completion status */
+ u32 pad[ 3 ]; /* i960 padding */
+} cp_cmdq_entry_t;
+
+
+/* host resident transmit queue entry */
+
+typedef struct host_txq_entry {
+ struct cp_txq_entry* cp_entry; /* addr of cp resident tx queue entry */
+ enum status* status; /* addr of host resident status */
+ struct tpd* tpd; /* addr of transmit PDU descriptor */
+ u32 tpd_dma; /* DMA address of tpd */
+ struct sk_buff* skb; /* related skb */
+ struct atm_vcc* vcc; /* related vcc */
+ void* data; /* copy of misaligned data */
+} host_txq_entry_t;
+
+
+/* host resident receive queue entry */
+
+typedef struct host_rxq_entry {
+ struct cp_rxq_entry* cp_entry; /* addr of cp resident rx queue entry */
+ enum status* status; /* addr of host resident status */
+ struct rpd* rpd; /* addr of receive PDU descriptor */
+ u32 rpd_dma; /* DMA address of rpd */
+} host_rxq_entry_t;
+
+
+/* host resident buffer supply queue entry */
+
+typedef struct host_bsq_entry {
+ struct cp_bsq_entry* cp_entry; /* addr of cp resident buffer supply queue entry */
+ enum status* status; /* addr of host resident status */
+ struct rbd_block* rbd_block; /* addr of receive buffer descriptor block */
+ u32 rbd_block_dma; /* DMA address od rdb */
+} host_bsq_entry_t;
+
+
+/* host resident command queue entry */
+
+typedef struct host_cmdq_entry {
+ struct cp_cmdq_entry* cp_entry; /* addr of cp resident cmd queue entry */
+ enum status* status; /* addr of host resident status */
+} host_cmdq_entry_t;
+
+
+/* chunk of memory */
+
+typedef struct chunk {
+ void* alloc_addr; /* base address of allocated chunk */
+ void* align_addr; /* base address of aligned chunk */
+ u32 dma_addr; /* DMA address of aligned chunk */
+ u32 alloc_size; /* length of allocated chunk */
+ u32 align_size; /* length of aligned chunk */
+} chunk_t;
+
+#define dma_size align_size /* DMA useable size */
+
+
+/* host resident receive buffer */
+
+typedef struct buffer {
+ struct buffer* next; /* next receive buffer */
+ enum buffer_scheme scheme; /* buffer scheme */
+ enum buffer_magn magn; /* buffer magnitude */
+ struct chunk data; /* data buffer */
+} buffer_t;
+
+
+#if (BITS_PER_LONG == 32)
+#define FORE200E_BUF2HDL(buffer) ((u32)(buffer))
+#define FORE200E_HDL2BUF(handle) ((struct buffer*)(handle))
+#else /* deal with 64 bit pointers */
+#define FORE200E_BUF2HDL(buffer) ((u32)((u64)(buffer)))
+#define FORE200E_HDL2BUF(handle) ((struct buffer*)(((u64)(handle)) | PAGE_OFFSET))
+#endif
+
+
+/* host resident command queue */
+
+typedef struct host_cmdq {
+ struct host_cmdq_entry host_entry[ QUEUE_SIZE_CMD ]; /* host resident cmd queue entries */
+ int head; /* head of cmd queue */
+ struct chunk status; /* array of completion status */
+} host_cmdq_t;
+
+
+/* host resident transmit queue */
+
+typedef struct host_txq {
+ struct host_txq_entry host_entry[ QUEUE_SIZE_TX ]; /* host resident tx queue entries */
+ int head; /* head of tx queue */
+ struct chunk tpd; /* array of tpds */
+ struct chunk status; /* arry of completion status */
+ int txing; /* number of pending PDUs in tx queue */
+} host_txq_t;
+
+
+/* host resident receive queue */
+
+typedef struct host_rxq {
+ struct host_rxq_entry host_entry[ QUEUE_SIZE_RX ]; /* host resident rx queue entries */
+ int head; /* head of rx queue */
+ struct chunk rpd; /* array of rpds */
+ struct chunk status; /* array of completion status */
+} host_rxq_t;
+
+
+/* host resident buffer supply queues */
+
+typedef struct host_bsq {
+ struct host_bsq_entry host_entry[ QUEUE_SIZE_BS ]; /* host resident buffer supply queue entries */
+ int head; /* head of buffer supply queue */
+ struct chunk rbd_block; /* array of rbds */
+ struct chunk status; /* array of completion status */
+ struct buffer* buffer; /* array of rx buffers */
+ int free; /* index of first free rx buffer */
+ volatile int count; /* count of supplied rx buffers */
+} host_bsq_t;
+
+
+/* header of the firmware image */
+
+typedef struct fw_header {
+ u32 magic; /* magic number */
+ u32 version; /* firware version id */
+ u32 load_offset; /* fw load offset in board memory */
+ u32 start_offset; /* fw execution start address in board memory */
+} fw_header_t;
+
+#define FW_HEADER_MAGIC 0x65726f66 /* 'fore' */
+
+
+/* receive buffer supply queues scheme specification */
+
+typedef struct bs_spec {
+ u32 queue_length; /* queue capacity */
+ u32 buffer_size; /* host buffer size */
+ u32 pool_size; /* number of rbds */
+ u32 supply_blksize; /* num of rbds in I/O block (multiple
+ of 4 between 4 and 124 inclusive) */
+} bs_spec_t;
+
+
+/* initialization command block (one-time command, not in cmd queue) */
+
+typedef struct init_block {
+ enum opcode opcode; /* initialize command */
+ enum status status; /* related status word */
+ u32 receive_threshold; /* not used */
+ u32 num_connect; /* ATM connections */
+ u32 cmd_queue_len; /* length of command queue */
+ u32 tx_queue_len; /* length of transmit queue */
+ u32 rx_queue_len; /* length of receive queue */
+ u32 rsd_extension; /* number of extra 32 byte blocks */
+ u32 tsd_extension; /* number of extra 32 byte blocks */
+ u32 conless_vpvc; /* not used */
+ u32 pad[ 2 ]; /* force quad alignment */
+ struct bs_spec bs_spec[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ]; /* buffer supply queues spec */
+} init_block_t;
+
+
+typedef enum media_type {
+ MEDIA_TYPE_CAT5_UTP = 0x06, /* unshielded twisted pair */
+ MEDIA_TYPE_MM_OC3_ST = 0x16, /* multimode fiber ST */
+ MEDIA_TYPE_MM_OC3_SC = 0x26, /* multimode fiber SC */
+ MEDIA_TYPE_SM_OC3_ST = 0x36, /* single-mode fiber ST */
+ MEDIA_TYPE_SM_OC3_SC = 0x46 /* single-mode fiber SC */
+} media_type_t;
+
+#define FORE200E_MEDIA_INDEX(media_type) ((media_type)>>4)
+
+
+/* cp resident queues */
+
+typedef struct cp_queues {
+ u32 cp_cmdq; /* command queue */
+ u32 cp_txq; /* transmit queue */
+ u32 cp_rxq; /* receive queue */
+ u32 cp_bsq[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ]; /* buffer supply queues */
+ u32 imask; /* 1 enables cp to host interrupts */
+ u32 istat; /* 1 for interrupt posted */
+ u32 heap_base; /* offset form beginning of ram */
+ u32 heap_size; /* space available for queues */
+ u32 hlogger; /* non zero for host logging */
+ u32 heartbeat; /* cp heartbeat */
+ u32 fw_release; /* firmware version */
+ u32 mon960_release; /* i960 monitor version */
+ u32 tq_plen; /* transmit throughput measurements */
+ /* make sure the init block remains on a quad word boundary */
+ struct init_block init; /* one time cmd, not in cmd queue */
+ enum media_type media_type; /* media type id */
+ u32 oc3_revision; /* OC-3 revision number */
+} cp_queues_t;
+
+
+/* boot status */
+
+typedef enum boot_status {
+ BSTAT_COLD_START = (u32) 0xc01dc01d, /* cold start */
+ BSTAT_SELFTEST_OK = (u32) 0x02201958, /* self-test ok */
+ BSTAT_SELFTEST_FAIL = (u32) 0xadbadbad, /* self-test failed */
+ BSTAT_CP_RUNNING = (u32) 0xce11feed, /* cp is running */
+ BSTAT_MON_TOO_BIG = (u32) 0x10aded00 /* i960 monitor is too big */
+} boot_status_t;
+
+
+/* software UART */
+
+typedef struct soft_uart {
+ u32 send; /* write register */
+ u32 recv; /* read register */
+} soft_uart_t;
+
+#define FORE200E_CP_MONITOR_UART_FREE 0x00000000
+#define FORE200E_CP_MONITOR_UART_AVAIL 0x01000000
+
+
+/* i960 monitor */
+
+typedef struct cp_monitor {
+ struct soft_uart soft_uart; /* software UART */
+ enum boot_status bstat; /* boot status */
+ u32 app_base; /* application base offset */
+ u32 mon_version; /* i960 monitor version */
+} cp_monitor_t;
+
+
+/* device state */
+
+typedef enum fore200e_state {
+ FORE200E_STATE_BLANK, /* initial state */
+ FORE200E_STATE_REGISTER, /* device registered */
+ FORE200E_STATE_CONFIGURE, /* bus interface configured */
+ FORE200E_STATE_MAP, /* board space mapped in host memory */
+ FORE200E_STATE_RESET, /* board resetted */
+ FORE200E_STATE_LOAD_FW, /* firmware loaded */
+ FORE200E_STATE_START_FW, /* firmware started */
+ FORE200E_STATE_INITIALIZE, /* initialize command successful */
+ FORE200E_STATE_INIT_CMDQ, /* command queue initialized */
+ FORE200E_STATE_INIT_TXQ, /* transmit queue initialized */
+ FORE200E_STATE_INIT_RXQ, /* receive queue initialized */
+ FORE200E_STATE_INIT_BSQ, /* buffer supply queue initialized */
+ FORE200E_STATE_ALLOC_BUF, /* receive buffers allocated */
+ FORE200E_STATE_IRQ, /* host interrupt requested */
+ FORE200E_STATE_COMPLETE /* initialization completed */
+} fore200e_state;
+
+
+/* PCA-200E registers */
+
+typedef struct fore200e_pca_regs {
+ volatile u32* hcr; /* address of host control register */
+ volatile u32* imr; /* address of host interrupt mask register */
+ volatile u32* psr; /* address of PCI specific register */
+} fore200e_pca_regs_t;
+
+
+/* SBA-200E registers */
+
+typedef struct fore200e_sba_regs {
+ volatile u32* hcr; /* address of host control register */
+ volatile u32* bsr; /* address of burst transfer size register */
+ volatile u32* isr; /* address of interrupt level selection register */
+} fore200e_sba_regs_t;
+
+
+/* model-specific registers */
+
+typedef union fore200e_regs {
+ struct fore200e_pca_regs pca; /* PCA-200E registers */
+ struct fore200e_sba_regs sba; /* SBA-200E registers */
+} fore200e_regs;
+
+
+struct fore200e;
+
+/* bus-dependent data */
+
+typedef struct fore200e_bus {
+ char* model_name; /* board model name */
+ char* proc_name; /* board name under /proc/atm */
+ int descr_alignment; /* tpd/rpd/rbd DMA alignment requirement */
+ int buffer_alignment; /* rx buffers DMA alignment requirement */
+ int status_alignment; /* status words DMA alignment requirement */
+ const unsigned char* fw_data; /* address of firmware data start */
+ const unsigned int* fw_size; /* address of firmware data size */
+ u32 (*read)(volatile u32*);
+ void (*write)(u32, volatile u32*);
+ u32 (*dma_map)(struct fore200e*, void*, int);
+ void (*dma_unmap)(struct fore200e*, u32, int);
+ void (*dma_sync)(struct fore200e*, u32, int);
+ int (*dma_chunk_alloc)(struct fore200e*, struct chunk*, int, int, int);
+ void (*dma_chunk_free)(struct fore200e*, struct chunk*);
+ struct fore200e* (*detect)(const struct fore200e_bus*, int);
+ int (*configure)(struct fore200e*);
+ int (*map)(struct fore200e*);
+ void (*reset)(struct fore200e*);
+ int (*prom_read)(struct fore200e*, struct prom_data*);
+ void (*unmap)(struct fore200e*);
+ void (*irq_enable)(struct fore200e*);
+ int (*irq_check)(struct fore200e*);
+ void (*irq_ack)(struct fore200e*);
+ int (*proc_read)(struct fore200e*, char*);
+} fore200e_bus_t;
+
+
+/* per-device data */
+
+typedef struct fore200e {
+ struct fore200e* next; /* next device */
+ const struct fore200e_bus* bus; /* bus-dependent code and data */
+ union fore200e_regs regs; /* bus-dependent registers */
+ struct atm_dev* atm_dev; /* ATM device */
+
+ enum fore200e_state state; /* device state */
+
+ char name[16]; /* device name */
+ void* bus_dev; /* bus-specific kernel data */
+ int irq; /* irq number */
+ unsigned long phys_base; /* physical base address */
+ void* virt_base; /* virtual base address */
+
+ unsigned char esi[ ESI_LEN ]; /* end system identifier */
+
+ struct cp_monitor* cp_monitor; /* i960 monitor address */
+ struct cp_queues* cp_queues; /* cp resident queues */
+ struct host_cmdq host_cmdq; /* host resident cmd queue */
+ struct host_txq host_txq; /* host resident tx queue */
+ struct host_rxq host_rxq; /* host resident rx queue */
+ /* host resident buffer supply queues */
+ struct host_bsq host_bsq[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ];
+
+ u32 available_cell_rate; /* remaining pseudo-CBR bw on link */
+
+ int loop_mode; /* S/UNI loopback mode */
+
+ struct stats* stats; /* last snapshot of the stats */
+
+ struct semaphore rate_sf; /* protects rate reservation ops */
+ spinlock_t tx_lock; /* protects tx ops */
+
+} fore200e_t;
+
+
+/* per-vcc data */
+
+typedef struct fore200e_vcc {
+ enum buffer_scheme scheme; /* rx buffer scheme */
+ struct tpd_rate rate; /* tx rate control data */
+ int rx_min_pdu; /* size of smallest PDU received */
+ int rx_max_pdu; /* size of largest PDU received */
+ int tx_min_pdu; /* size of smallest PDU transmitted */
+ int tx_max_pdu; /* size of largest PDU transmitted */
+} fore200e_vcc_t;
+
+
+
+/* 200E-series common memory layout */
+
+#define FORE200E_CP_MONITOR_OFFSET 0x00000400 /* i960 monitor interface */
+#define FORE200E_CP_QUEUES_OFFSET 0x00004d40 /* cp resident queues */
+
+
+/* PCA-200E memory layout */
+
+#define PCA200E_IOSPACE_LENGTH 0x00200000
+
+#define PCA200E_HCR_OFFSET 0x00100000 /* board control register */
+#define PCA200E_IMR_OFFSET 0x00100004 /* host IRQ mask register */
+#define PCA200E_PSR_OFFSET 0x00100008 /* PCI specific register */
+
+
+/* PCA-200E host control register */
+
+#define PCA200E_HCR_RESET (1<<0) /* read / write */
+#define PCA200E_HCR_HOLD_LOCK (1<<1) /* read / write */
+#define PCA200E_HCR_I960FAIL (1<<2) /* read */
+#define PCA200E_HCR_INTRB (1<<2) /* write */
+#define PCA200E_HCR_HOLD_ACK (1<<3) /* read */
+#define PCA200E_HCR_INTRA (1<<3) /* write */
+#define PCA200E_HCR_OUTFULL (1<<4) /* read */
+#define PCA200E_HCR_CLRINTR (1<<4) /* write */
+#define PCA200E_HCR_ESPHOLD (1<<5) /* read */
+#define PCA200E_HCR_INFULL (1<<6) /* read */
+#define PCA200E_HCR_TESTMODE (1<<7) /* read */
+
+
+/* PCA-200E PCI bus interface regs (offsets in PCI config space) */
+
+#define PCA200E_PCI_LATENCY 0x40 /* maximum slave latenty */
+#define PCA200E_PCI_MASTER_CTRL 0x41 /* master control */
+#define PCA200E_PCI_THRESHOLD 0x42 /* burst / continous req threshold */
+
+/* PBI master control register */
+
+#define PCA200E_CTRL_DIS_CACHE_RD (1<<0) /* disable cache-line reads */
+#define PCA200E_CTRL_DIS_WRT_INVAL (1<<1) /* disable writes and invalidates */
+#define PCA200E_CTRL_2_CACHE_WRT_INVAL (1<<2) /* require 2 cache-lines for writes and invalidates */
+#define PCA200E_CTRL_IGN_LAT_TIMER (1<<3) /* ignore the latency timer */
+#define PCA200E_CTRL_ENA_CONT_REQ_MODE (1<<4) /* enable continuous request mode */
+#define PCA200E_CTRL_LARGE_PCI_BURSTS (1<<5) /* force large PCI bus bursts */
+#define PCA200E_CTRL_CONVERT_ENDIAN (1<<6) /* convert endianess of slave RAM accesses */
+
+
+
+#define SBA200E_PROM_NAME "FORE,sba-200e" /* device name in openprom tree */
+
+
+/* size of SBA-200E registers */
+
+#define SBA200E_HCR_LENGTH 4
+#define SBA200E_BSR_LENGTH 4
+#define SBA200E_ISR_LENGTH 4
+#define SBA200E_RAM_LENGTH 0x40000
+
+
+/* SBA-200E SBUS burst transfer size register */
+
+#define SBA200E_BSR_BURST4 0x04
+#define SBA200E_BSR_BURST8 0x08
+#define SBA200E_BSR_BURST16 0x10
+
+
+/* SBA-200E host control register */
+
+#define SBA200E_HCR_RESET (1<<0) /* read / write (sticky) */
+#define SBA200E_HCR_HOLD_LOCK (1<<1) /* read / write (sticky) */
+#define SBA200E_HCR_I960FAIL (1<<2) /* read */
+#define SBA200E_HCR_I960SETINTR (1<<2) /* write */
+#define SBA200E_HCR_OUTFULL (1<<3) /* read */
+#define SBA200E_HCR_INTR_CLR (1<<3) /* write */
+#define SBA200E_HCR_INTR_ENA (1<<4) /* read / write (sticky) */
+#define SBA200E_HCR_ESPHOLD (1<<5) /* read */
+#define SBA200E_HCR_INFULL (1<<6) /* read */
+#define SBA200E_HCR_TESTMODE (1<<7) /* read */
+#define SBA200E_HCR_INTR_REQ (1<<8) /* read */
+
+#define SBA200E_HCR_STICKY (SBA200E_HCR_RESET | SBA200E_HCR_HOLD_LOCK | SBA200E_HCR_INTR_ENA)
+
+
+#endif /* __KERNEL__ */
+#endif /* _FORE200E_H */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)