patch-2.3.51 linux/drivers/sound/aci.c
Next file: linux/drivers/sound/ad1816.c
Previous file: linux/drivers/sound/Makefile
Back to the patch index
Back to the overall index
- Lines: 719
- Date:
Wed Mar 8 11:37:03 2000
- Orig file:
v2.3.50/linux/drivers/sound/aci.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.50/linux/drivers/sound/aci.c linux/drivers/sound/aci.c
@@ -0,0 +1,718 @@
+/*
+ * Audio Command Interface (ACI) driver (sound/aci.c)
+ *
+ * ACI is a protocol used to communicate with the microcontroller on
+ * some sound cards produced by miro, e.g. the miroSOUND PCM12 and
+ * PCM20. The ACI has been developed for miro by Norberto Pellicci
+ * <pellicci@home.com>. Special thanks to both him and miro for
+ * providing the ACI specification.
+ *
+ * The main function of the ACI is to control the mixer and to get a
+ * product identification. On the PCM20, ACI also controls the radio
+ * tuner on this card, this is supported in the Video for Linux
+ * radio-miropcm20 driver.
+ *
+ * This Voxware ACI driver currently only supports the ACI functions
+ * on the miroSOUND PCM12 and PCM20 card. Support for miro sound cards
+ * with additional ACI functions can easily be added later.
+ *
+ * / NOTE / When compiling as a module, make sure to load the module
+ * after loading the mad16 module. The initialisation code expects the
+ * MAD16 default mixer to be already available.
+ *
+ * Revision history:
+ *
+ * 1995-11-10 Markus Kuhn <mskuhn@cip.informatik.uni-erlangen.de>
+ * First version written.
+ * 1995-12-31 Markus Kuhn
+ * Second revision, general code cleanup.
+ * 1996-05-16 Hannu Savolainen
+ * Integrated with other parts of the driver.
+ * 1996-05-28 Markus Kuhn
+ * Initialize CS4231A mixer, make ACI first mixer,
+ * use new private mixer API for solo mode.
+ * 1998-08-18 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
+ * Small modification to export ACI functions and
+ * complete modularisation.
+ */
+
+/*
+ * Some driver specific information and features:
+ *
+ * This mixer driver identifies itself to applications as "ACI" in
+ * mixer_info.id as retrieved by ioctl(fd, SOUND_MIXER_INFO, &mixer_info).
+ *
+ * Proprietary mixer features that go beyond the standard OSS mixer
+ * interface are:
+ *
+ * Full duplex solo configuration:
+ *
+ * int solo_mode;
+ * ioctl(fd, SOUND_MIXER_PRIVATE1, &solo_mode);
+ *
+ * solo_mode = 0: deactivate solo mode (default)
+ * solo_mode > 0: activate solo mode
+ * With activated solo mode, the PCM input can not any
+ * longer hear the signals produced by the PCM output.
+ * Activating solo mode is important in duplex mode in order
+ * to avoid feedback distortions.
+ * solo_mode < 0: do not change solo mode (just retrieve the status)
+ *
+ * When the ioctl() returns 0, solo_mode contains the previous
+ * status (0 = deactivated, 1 = activated). If solo mode is not
+ * implemented on this card, ioctl() returns -1 and sets errno to
+ * EINVAL.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include "sound_config.h"
+
+#undef DEBUG /* if defined, produce a verbose report via syslog */
+
+int aci_port = 0x354; /* as determined by bit 4 in the OPTi 929 MC4 register */
+unsigned char aci_idcode[2] = {0, 0}; /* manufacturer and product ID */
+unsigned char aci_version = 0; /* ACI firmware version */
+int aci_solo; /* status bit of the card that can't be *
+ * checked with ACI versions prior to 0xb0 */
+
+static int aci_present = 0;
+
+#ifdef MODULE /* Whether the aci mixer is to be reset. */
+int aci_reset = 0; /* Default: don't reset if the driver is a */
+MODULE_PARM(aci_reset,"i");
+#else /* module; use "insmod aci.o aci_reset=1" */
+int aci_reset = 1; /* to override. */
+#endif
+
+
+#define COMMAND_REGISTER (aci_port)
+#define STATUS_REGISTER (aci_port + 1)
+#define BUSY_REGISTER (aci_port + 2)
+
+/*
+ * Wait until the ACI microcontroller has set the READYFLAG in the
+ * Busy/IRQ Source Register to 0. This is required to avoid
+ * overrunning the sound card microcontroller. We do a busy wait here,
+ * because the microcontroller is not supposed to signal a busy
+ * condition for more than a few clock cycles. In case of a time-out,
+ * this function returns -1.
+ *
+ * This busy wait code normally requires less than 15 loops and
+ * practically always less than 100 loops on my i486/DX2 66 MHz.
+ *
+ * Warning: Waiting on the general status flag after reseting the MUTE
+ * function can take a VERY long time, because the PCM12 does some kind
+ * of fade-in effect. For this reason, access to the MUTE function has
+ * not been implemented at all.
+ */
+
+static int busy_wait(void)
+{
+ long timeout;
+
+ for (timeout = 0; timeout < 10000000L; timeout++)
+ if ((inb_p(BUSY_REGISTER) & 1) == 0)
+ return 0;
+
+#ifdef DEBUG
+ printk("ACI: READYFLAG timed out.\n");
+#endif
+
+ return -1;
+}
+
+
+/*
+ * Read the GENERAL STATUS register.
+ */
+
+static int read_general_status(void)
+{
+ unsigned long flags;
+ int status;
+
+ save_flags(flags);
+ cli();
+
+ if (busy_wait()) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ status = (unsigned) inb_p(STATUS_REGISTER);
+ restore_flags(flags);
+ return status;
+}
+
+
+/*
+ * The four ACI command types (implied, write, read and indexed) can
+ * be sent to the microcontroller using the following four functions.
+ * If a problem occurred, they return -1.
+ */
+
+int aci_implied_cmd(unsigned char opcode)
+{
+ unsigned long flags;
+
+#ifdef DEBUG
+ printk("ACI: aci_implied_cmd(0x%02x)\n", opcode);
+#endif
+
+ save_flags(flags);
+ cli();
+
+ if (read_general_status() < 0 || busy_wait()) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ outb_p(opcode, COMMAND_REGISTER);
+
+ restore_flags(flags);
+ return 0;
+}
+
+
+int aci_write_cmd(unsigned char opcode, unsigned char parameter)
+{
+ unsigned long flags;
+ int status;
+
+#ifdef DEBUG
+ printk("ACI: aci_write_cmd(0x%02x, 0x%02x)\n", opcode, parameter);
+#endif
+
+ save_flags(flags);
+ cli();
+
+ if (read_general_status() < 0 || busy_wait()) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ outb_p(opcode, COMMAND_REGISTER);
+ if (busy_wait()) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ outb_p(parameter, COMMAND_REGISTER);
+
+ if ((status = read_general_status()) < 0) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ /* polarity of the INVALID flag depends on ACI version */
+ if ((aci_version < 0xb0 && (status & 0x40) != 0) ||
+ (aci_version >= 0xb0 && (status & 0x40) == 0)) {
+ restore_flags(flags);
+ printk("ACI: invalid write command 0x%02x, 0x%02x.\n",
+ opcode, parameter);
+ return -1;
+ }
+
+ restore_flags(flags);
+ return 0;
+}
+
+/*
+ * This write command send 2 parameters instead of one.
+ * Only used in PCM20 radio frequency tuning control
+ */
+
+int aci_write_cmd_d(unsigned char opcode, unsigned char parameter, unsigned char parameter2)
+{
+ unsigned long flags;
+ int status;
+
+#ifdef DEBUG
+ printk("ACI: aci_write_cmd_d(0x%02x, 0x%02x)\n", opcode, parameter, parameter2);
+#endif
+
+ save_flags(flags);
+ cli();
+
+ if (read_general_status() < 0 || busy_wait()) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ outb_p(opcode, COMMAND_REGISTER);
+ if (busy_wait()) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ outb_p(parameter, COMMAND_REGISTER);
+ if (busy_wait()) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ outb_p(parameter2, COMMAND_REGISTER);
+
+ if ((status = read_general_status()) < 0) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ /* polarity of the INVALID flag depends on ACI version */
+ if ((aci_version < 0xb0 && (status & 0x40) != 0) ||
+ (aci_version >= 0xb0 && (status & 0x40) == 0)) {
+ restore_flags(flags);
+#if 0 /* Frequency tuning works, but the INVALID flag is set ??? */
+ printk("ACI: invalid write (double) command 0x%02x, 0x%02x, 0x%02x.\n",
+ opcode, parameter, parameter2);
+#endif
+ return -1;
+ }
+
+ restore_flags(flags);
+ return 0;
+}
+
+int aci_read_cmd(unsigned char opcode, int length, unsigned char *parameter)
+{
+ unsigned long flags;
+ int i = 0;
+
+ save_flags(flags);
+ cli();
+
+ if (read_general_status() < 0) {
+ restore_flags(flags);
+ return -1;
+ }
+ while (i < length) {
+ if (busy_wait()) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ outb_p(opcode, COMMAND_REGISTER);
+ if (busy_wait()) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ parameter[i++] = inb_p(STATUS_REGISTER);
+#ifdef DEBUG
+ if (i == 1)
+ printk("ACI: aci_read_cmd(0x%02x, %d) = 0x%02x\n",
+ opcode, length, parameter[i-1]);
+ else
+ printk("ACI: aci_read_cmd cont.: 0x%02x\n", parameter[i-1]);
+#endif
+ }
+
+ restore_flags(flags);
+ return 0;
+}
+
+
+int aci_indexed_cmd(unsigned char opcode, unsigned char index,
+ unsigned char *parameter)
+{
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+
+ if (read_general_status() < 0 || busy_wait()) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ outb_p(opcode, COMMAND_REGISTER);
+ if (busy_wait()) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ outb_p(index, COMMAND_REGISTER);
+ if (busy_wait()) {
+ restore_flags(flags);
+ return -1;
+ }
+
+ *parameter = inb_p(STATUS_REGISTER);
+#ifdef DEBUG
+ printk("ACI: aci_indexed_cmd(0x%02x, 0x%02x) = 0x%02x\n", opcode, index,
+ *parameter);
+#endif
+
+ restore_flags(flags);
+ return 0;
+}
+
+
+/*
+ * The following macro SCALE can be used to scale one integer volume
+ * value into another one using only integer arithmetic. If the input
+ * value x is in the range 0 <= x <= xmax, then the result will be in
+ * the range 0 <= SCALE(xmax,ymax,x) <= ymax.
+ *
+ * This macro has for all xmax, ymax > 0 and all 0 <= x <= xmax the
+ * following nice properties:
+ *
+ * - SCALE(xmax,ymax,xmax) = ymax
+ * - SCALE(xmax,ymax,0) = 0
+ * - SCALE(xmax,ymax,SCALE(ymax,xmax,SCALE(xmax,ymax,x))) = SCALE(xmax,ymax,x)
+ *
+ * In addition, the rounding error is minimal and nicely distributed.
+ * The proofs are left as an exercise to the reader.
+ */
+
+#define SCALE(xmax,ymax,x) (((x)*(ymax)+(xmax)/2)/(xmax))
+
+
+static int getvolume(caddr_t arg,
+ unsigned char left_index, unsigned char right_index)
+{
+ int vol;
+ unsigned char buf;
+
+ /* left channel */
+ if (aci_indexed_cmd(0xf0, left_index, &buf))
+ return -EIO;
+ vol = SCALE(0x20, 100, buf < 0x20 ? 0x20-buf : 0);
+
+ /* right channel */
+ if (aci_indexed_cmd(0xf0, right_index, &buf))
+ return -EIO;
+ vol |= SCALE(0x20, 100, buf < 0x20 ? 0x20-buf : 0) << 8;
+
+ return (*(int *) arg = vol);
+}
+
+
+static int setvolume(caddr_t arg,
+ unsigned char left_index, unsigned char right_index)
+{
+ int vol, ret;
+
+ /* left channel */
+ vol = *(int *)arg & 0xff;
+ if (vol > 100)
+ vol = 100;
+ vol = SCALE(100, 0x20, vol);
+ if (aci_write_cmd(left_index, 0x20 - vol))
+ return -EIO;
+ ret = SCALE(0x20, 100, vol);
+
+
+ /* right channel */
+ vol = (*(int *)arg >> 8) & 0xff;
+ if (vol > 100)
+ vol = 100;
+ vol = SCALE(100, 0x20, vol);
+ if (aci_write_cmd(right_index, 0x20 - vol))
+ return -EIO;
+ ret |= SCALE(0x20, 100, vol) << 8;
+
+ return (*(int *) arg = ret);
+}
+
+
+static int
+aci_mixer_ioctl (int dev, unsigned int cmd, caddr_t arg)
+{
+ int status, vol;
+ unsigned char buf;
+
+ /* handle solo mode control */
+ if (cmd == SOUND_MIXER_PRIVATE1) {
+ if (*(int *) arg >= 0) {
+ aci_solo = !!*(int *) arg;
+ if (aci_write_cmd(0xd2, aci_solo))
+ return -EIO;
+ } else if (aci_version >= 0xb0) {
+ if ((status = read_general_status()) < 0)
+ return -EIO;
+ return (*(int *) arg = (status & 0x20) == 0);
+ }
+
+ return (*(int *) arg = aci_solo);
+ }
+
+ if (((cmd >> 8) & 0xff) == 'M') {
+ if (cmd & IOC_IN)
+ /* read and write */
+ switch (cmd & 0xff) {
+ case SOUND_MIXER_VOLUME:
+ return setvolume(arg, 0x01, 0x00);
+ case SOUND_MIXER_CD:
+ return setvolume(arg, 0x3c, 0x34);
+ case SOUND_MIXER_MIC:
+ return setvolume(arg, 0x38, 0x30);
+ case SOUND_MIXER_LINE:
+ return setvolume(arg, 0x39, 0x31);
+ case SOUND_MIXER_SYNTH:
+ return setvolume(arg, 0x3b, 0x33);
+ case SOUND_MIXER_PCM:
+ return setvolume(arg, 0x3a, 0x32);
+ case SOUND_MIXER_LINE1: /* AUX1 */
+ return setvolume(arg, 0x3d, 0x35);
+ case SOUND_MIXER_LINE2: /* AUX2 */
+ return setvolume(arg, 0x3e, 0x36);
+ case SOUND_MIXER_IGAIN: /* MIC pre-amp */
+ vol = *(int *) arg & 0xff;
+ if (vol > 100)
+ vol = 100;
+ vol = SCALE(100, 3, vol);
+ if (aci_write_cmd(0x03, vol))
+ return -EIO;
+ vol = SCALE(3, 100, vol);
+ return (*(int *) arg = vol | (vol << 8));
+ case SOUND_MIXER_RECSRC:
+ return (*(int *) arg = 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+ else
+ /* only read */
+ switch (cmd & 0xff) {
+ case SOUND_MIXER_DEVMASK:
+ return (*(int *) arg =
+ SOUND_MASK_VOLUME | SOUND_MASK_CD |
+ SOUND_MASK_MIC | SOUND_MASK_LINE |
+ SOUND_MASK_SYNTH | SOUND_MASK_PCM |
+#if 0
+ SOUND_MASK_IGAIN |
+#endif
+ SOUND_MASK_LINE1 | SOUND_MASK_LINE2);
+ break;
+ case SOUND_MIXER_STEREODEVS:
+ return (*(int *) arg =
+ SOUND_MASK_VOLUME | SOUND_MASK_CD |
+ SOUND_MASK_MIC | SOUND_MASK_LINE |
+ SOUND_MASK_SYNTH | SOUND_MASK_PCM |
+ SOUND_MASK_LINE1 | SOUND_MASK_LINE2);
+ break;
+ case SOUND_MIXER_RECMASK:
+ return (*(int *) arg = 0);
+ break;
+ case SOUND_MIXER_RECSRC:
+ return (*(int *) arg = 0);
+ break;
+ case SOUND_MIXER_CAPS:
+ return (*(int *) arg = 0);
+ break;
+ case SOUND_MIXER_VOLUME:
+ return getvolume(arg, 0x04, 0x03);
+ case SOUND_MIXER_CD:
+ return getvolume(arg, 0x0a, 0x09);
+ case SOUND_MIXER_MIC:
+ return getvolume(arg, 0x06, 0x05);
+ case SOUND_MIXER_LINE:
+ return getvolume(arg, 0x08, 0x07);
+ case SOUND_MIXER_SYNTH:
+ return getvolume(arg, 0x0c, 0x0b);
+ case SOUND_MIXER_PCM:
+ return getvolume(arg, 0x0e, 0x0d);
+ case SOUND_MIXER_LINE1: /* AUX1 */
+ return getvolume(arg, 0x11, 0x10);
+ case SOUND_MIXER_LINE2: /* AUX2 */
+ return getvolume(arg, 0x13, 0x12);
+ case SOUND_MIXER_IGAIN: /* MIC pre-amp */
+ if (aci_indexed_cmd(0xf0, 0x21, &buf))
+ return -EIO;
+ vol = SCALE(3, 100, buf <= 3 ? buf : 3);
+ vol |= vol << 8;
+ return (*(int *) arg = vol);
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return -EINVAL;
+}
+
+
+static struct mixer_operations aci_mixer_operations =
+{
+ "ACI",
+ "ACI mixer",
+ aci_mixer_ioctl,
+ NULL
+};
+
+static unsigned char
+mad_read (int port)
+{
+ outb (0xE3, 0xf8f); /* Write MAD16 password */
+ return inb (port); /* Read from port */
+}
+
+
+/*
+ * Check, whether there actually is any ACI port operational and if
+ * one was found, then initialize the ACI interface, reserve the I/O
+ * addresses and attach the new mixer to the relevant VoxWare data
+ * structures.
+ *
+ * Returns: 1 ACI mixer detected
+ * 0 nothing there
+ *
+ * There is also an internal mixer in the codec (CS4231A or AD1845),
+ * that deserves no purpose in an ACI based system which uses an
+ * external ACI controlled stereo mixer. Make sure that this codec
+ * mixer has the AUX1 input selected as the recording source, that the
+ * input gain is set near maximum and that the other channels going
+ * from the inputs to the codec output are muted.
+ */
+
+static int __init attach_aci(void)
+{
+ char *boardname = "unknown";
+ int volume;
+
+#define MC4_PORT 0xf90
+
+ aci_port =
+ (mad_read(MC4_PORT) & 0x10) ? 0x344 : 0x354;
+
+ if (check_region(aci_port, 3)) {
+#ifdef DEBUG
+ printk("ACI: I/O area 0x%03x-0x%03x already used.\n",
+ aci_port, aci_port+2);
+#endif
+ return 0;
+ }
+
+ if (aci_read_cmd(0xf2, 2, aci_idcode)) {
+#ifdef DEBUG
+ printk("ACI: Failed to read idcode.\n");
+#endif
+ return 0;
+ }
+
+ if (aci_read_cmd(0xf1, 1, &aci_version)) {
+#ifdef DEBUG
+ printk("ACI: Failed to read version.\n");
+#endif
+ return 0;
+ }
+
+ if (aci_idcode[0] == 0x6d) {
+ /* It looks like a miro sound card. */
+ switch (aci_idcode[1]) {
+ case 0x41:
+ boardname = "PCM1 pro / early PCM12";
+ break;
+ case 0x42:
+ boardname = "PCM12";
+ break;
+ case 0x43:
+ boardname = "PCM20";
+ break;
+ default:
+ boardname = "unknown miro";
+ }
+ } else
+#ifndef DEBUG
+ return 0;
+#endif
+
+ printk("<ACI %02x, id %02x %02x (%s)> at 0x%03x\n",
+ aci_version, aci_idcode[0], aci_idcode[1], boardname, aci_port);
+
+ if (aci_reset) {
+ /* initialize ACI mixer */
+ aci_implied_cmd(0xff);
+ aci_solo = 0;
+ }
+
+ /* attach the mixer */
+ request_region(aci_port, 3, "sound mixer (ACI)");
+ if (num_mixers < MAX_MIXER_DEV) {
+ if (num_mixers > 0 &&
+ !strncmp("MAD16 WSS", mixer_devs[num_mixers-1]->name, 9)) {
+ /*
+ * The previously registered mixer device is the CS4231A which
+ * has no function on an ACI card. Make the ACI mixer the first
+ * of the two mixer devices.
+ */
+ mixer_devs[num_mixers] = mixer_devs[num_mixers-1];
+ mixer_devs[num_mixers-1] = &aci_mixer_operations;
+ /*
+ * Initialize the CS4231A mixer with reasonable values. It is
+ * unlikely that the user ever will want to change these as all
+ * channels can be mixed via ACI.
+ */
+ volume = 0x6464;
+ mixer_devs[num_mixers]->ioctl(num_mixers,
+ SOUND_MIXER_WRITE_PCM, (caddr_t) &volume);
+ volume = 0x6464;
+ mixer_devs[num_mixers]->ioctl(num_mixers,
+ SOUND_MIXER_WRITE_IGAIN, (caddr_t) &volume);
+ volume = 0;
+ mixer_devs[num_mixers]->ioctl(num_mixers,
+ SOUND_MIXER_WRITE_SPEAKER, (caddr_t) &volume);
+ volume = 0;
+ mixer_devs[num_mixers]->ioctl(num_mixers,
+ SOUND_MIXER_WRITE_MIC, (caddr_t) &volume);
+ volume = 0;
+ mixer_devs[num_mixers]->ioctl(num_mixers,
+ SOUND_MIXER_WRITE_IMIX, (caddr_t) &volume);
+ volume = 0;
+ mixer_devs[num_mixers]->ioctl(num_mixers,
+ SOUND_MIXER_WRITE_LINE1, (caddr_t) &volume);
+ volume = 0;
+ mixer_devs[num_mixers]->ioctl(num_mixers,
+ SOUND_MIXER_WRITE_LINE2, (caddr_t) &volume);
+ volume = 0;
+ mixer_devs[num_mixers]->ioctl(num_mixers,
+ SOUND_MIXER_WRITE_LINE3, (caddr_t) &volume);
+ volume = SOUND_MASK_LINE1;
+ mixer_devs[num_mixers]->ioctl(num_mixers,
+ SOUND_MIXER_WRITE_RECSRC, (caddr_t) &volume);
+ num_mixers++;
+ } else
+ mixer_devs[num_mixers++] = &aci_mixer_operations;
+ }
+
+ /* Just do something; otherwise the first write command fails, at
+ * least with my PCM20.
+ */
+ aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_READ_VOLUME, (caddr_t) &volume);
+
+ if (aci_reset) {
+ /* Initialize ACI mixer with reasonable power-up values */
+ volume = 0x3232;
+ aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_VOLUME, (caddr_t) &volume);
+ volume = 0x3232;
+ aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_SYNTH, (caddr_t) &volume);
+ volume = 0x3232;
+ aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_PCM, (caddr_t) &volume);
+ volume = 0x3232;
+ aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_LINE, (caddr_t) &volume);
+ volume = 0x3232;
+ aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_MIC, (caddr_t) &volume);
+ volume = 0x3232;
+ aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_CD, (caddr_t) &volume);
+ volume = 0x3232;
+ aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_LINE1, (caddr_t) &volume);
+ volume = 0x3232;
+ aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_LINE2, (caddr_t) &volume);
+ }
+
+ aci_present = 1;
+
+ return 1;
+}
+
+static void __exit unload_aci(void)
+{
+ if (aci_present)
+ release_region(aci_port, 3);
+}
+
+module_init(attach_aci);
+module_exit(unload_aci);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)