patch-2.3.99-pre9 linux/drivers/ide/hpt366.c
Next file: linux/drivers/ide/icside.c
Previous file: linux/drivers/ide/hpt34x.c
Back to the patch index
Back to the overall index
- Lines: 88
- Date:
Mon May 15 11:03:48 2000
- Orig file:
v2.3.99-pre8/linux/drivers/ide/hpt366.c
- Orig date:
Mon Mar 27 08:08:24 2000
diff -u --recursive --new-file v2.3.99-pre8/linux/drivers/ide/hpt366.c linux/drivers/ide/hpt366.c
@@ -173,6 +173,14 @@
byte hpt363_shared_irq = 0;
byte hpt363_shared_pin = 0;
+static unsigned int pci_rev_check_hpt366 (struct pci_dev *dev)
+{
+ unsigned int class_rev;
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
+ class_rev &= 0xff;
+ return ((int) (class_rev == 0x03) ? 1 : 0);
+}
+
static int check_in_drive_lists (ide_drive_t *drive, const char **list)
{
struct hd_driveid *id = drive->id;
@@ -212,9 +220,6 @@
static int hpt366_tune_chipset (ide_drive_t *drive, byte speed)
{
int err;
-#if HPT366_DEBUG_DRIVE_INFO
- int drive_number = ((HWIF(drive)->channel ? 2 : 0) + (drive->select.b.unit & 0x01));
-#endif /* HPT366_DEBUG_DRIVE_INFO */
byte regtime = (drive->select.b.unit & 0x01) ? 0x44 : 0x40;
unsigned int reg1 = 0;
unsigned int reg2 = 0;
@@ -251,11 +256,15 @@
pci_write_config_dword(HWIF(drive)->pci_dev, regtime, reg2);
err = ide_config_drive_speed(drive, speed);
+ if (!drive->init_speed)
+ drive->init_speed = speed;
+
#if HPT366_DEBUG_DRIVE_INFO
printk("%s: speed=0x%02x(%s), drive%d, old=0x%08x, new=0x%08x, err=0x%04x\n",
drive->name, speed, ide_xfer_verbose(speed),
- drive_number, reg1, reg2, err);
+ drive->dn, reg1, reg2, err);
#endif /* HPT366_DEBUG_DRIVE_INFO */
+ drive->current_speed = speed;
return(err);
}
@@ -469,10 +478,12 @@
case ide_dma_check:
return config_drive_xfer_rate(drive);
case ide_dma_lostirq:
+#if 0
pci_read_config_byte(HWIF(drive)->pci_dev, 0x50, ®50h);
pci_write_config_byte(HWIF(drive)->pci_dev, 0x50, reg50h|0x03);
pci_read_config_byte(HWIF(drive)->pci_dev, 0x50, ®50h);
/* ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, NULL); */
+#endif
case ide_dma_timeout:
default:
break;
@@ -508,6 +519,8 @@
if (!hpt366_proc) {
hpt366_proc = 1;
bmide_dev = dev;
+ if (pci_rev_check_hpt366(dev))
+ bmide2_dev = dev;
hpt366_display_info = &hpt366_get_info;
}
if ((hpt366_proc) && ((dev->devfn - bmide_dev->devfn) == 1)) {
@@ -533,7 +546,11 @@
void __init ide_init_hpt366 (ide_hwif_t *hwif)
{
+ if (pci_rev_check_hpt366(hwif->pci_dev)) return;
+
hwif->tuneproc = &hpt366_tune_drive;
+ hwif->speedproc = &hpt366_tune_chipset;
+
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base) {
hwif->dmaproc = &hpt366_dmaproc;
@@ -555,6 +572,11 @@
byte masterdma = 0, slavedma = 0;
byte dma_new = 0, dma_old = inb(dmabase+2);
unsigned long flags;
+
+ if (pci_rev_check_hpt366(hwif->pci_dev)) {
+ ide_setup_dma(hwif, dmabase, 8);
+ return;
+ }
__save_flags(flags); /* local CPU only */
__cli(); /* local CPU only */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)