patch-2.4.18 linux/arch/ppc/kernel/pmac_feature.c
Next file: linux/arch/ppc/kernel/pmac_nvram.c
Previous file: linux/arch/ppc/kernel/pmac_backlight.c
Back to the patch index
Back to the overall index
- Lines: 2123
- Date:
Mon Feb 4 18:47:24 2002
- Orig file:
linux.orig/arch/ppc/kernel/pmac_feature.c
- Orig date:
Thu Jan 1 00:00:00 1970
diff -Naur -X /home/marcelo/lib/dontdiff linux.orig/arch/ppc/kernel/pmac_feature.c linux/arch/ppc/kernel/pmac_feature.c
@@ -0,0 +1,2122 @@
+/*
+ * BK Id: %F% %I% %G% %U% %#%
+ */
+/*
+ * arch/ppc/kernel/pmac_feature.c
+ *
+ * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
+ * Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * TODO:
+ *
+ * - Replace mdelay with some schedule loop if possible
+ * - Shorten some obfuscated delays on some routines (like modem
+ * power)
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <asm/sections.h>
+#include <asm/errno.h>
+#include <asm/ohare.h>
+#include <asm/heathrow.h>
+#include <asm/keylargo.h>
+#include <asm/uninorth.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/dbdma.h>
+
+#undef DEBUG_FEATURE
+
+#ifdef DEBUG_FEATURE
+#define DBG(fmt,...) printk(KERN_DEBUG fmt)
+#else
+#define DBG(fmt,...)
+#endif
+
+/* Exported from arch/ppc/kernel/idle.c */
+extern unsigned long powersave_nap;
+
+/*
+ * We use a single global lock to protect accesses. Each driver has
+ * to take care of it's own locking
+ */
+static spinlock_t feature_lock __pmacdata = SPIN_LOCK_UNLOCKED;
+
+#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags);
+#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags);
+
+/*
+ * Helper functions regarding the various flavors of mac-io
+ */
+
+#define MAX_MACIO_CHIPS 2
+
+enum {
+ macio_unknown = 0,
+ macio_grand_central,
+ macio_ohare,
+ macio_ohareII,
+ macio_heathrow,
+ macio_gatwick,
+ macio_paddington,
+ macio_keylargo,
+ macio_pangea
+};
+
+static const char* macio_names[] __pmacdata =
+{
+ "Unknown",
+ "Grand Central",
+ "OHare",
+ "OHareII",
+ "Heathrow",
+ "Gatwick",
+ "Paddington",
+ "Keylargo",
+ "Pangea"
+};
+
+static struct macio_chip
+{
+ struct device_node* of_node;
+ int type;
+ int rev;
+ volatile u32* base;
+ unsigned long flags;
+} macio_chips[MAX_MACIO_CHIPS] __pmacdata;
+
+#define MACIO_FLAG_SCCA_ON 0x00000001
+#define MACIO_FLAG_SCCB_ON 0x00000002
+#define MACIO_FLAG_SCC_LOCKED 0x00000004
+#define MACIO_FLAG_AIRPORT_ON 0x00000010
+#define MACIO_FLAG_FW_SUPPORTED 0x00000020
+
+static struct macio_chip* __pmac
+macio_find(struct device_node* child, int type)
+{
+ while(child) {
+ int i;
+
+ for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
+ if (child == macio_chips[i].of_node &&
+ (!type || macio_chips[i].type == type))
+ return &macio_chips[i];
+ child = child->parent;
+ }
+ return NULL;
+}
+
+#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2))
+#define MACIO_FCR8(macio, r) (((volatile u8*)((macio)->base)) + (r))
+
+#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r)))
+#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v)))
+#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v)))
+#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v)))
+#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r)))
+#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v)))
+
+/*
+ * Uninorth reg. access. Note that Uni-N regs are big endian
+ */
+
+#define UN_REG(r) (uninorth_base + ((r) >> 2))
+#define UN_IN(r) (in_be32(UN_REG(r)))
+#define UN_OUT(r,v) (out_be32(UN_REG(r), (v)))
+#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v)))
+#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v)))
+
+static struct device_node* uninorth_node __pmacdata;
+static u32* uninorth_base __pmacdata;
+static u32 uninorth_rev __pmacdata;
+
+
+/*
+ * For each motherboard family, we have a table of functions pointers
+ * that handle the various features.
+ */
+
+typedef int (*feature_call)(struct device_node* node, int param, int value);
+
+struct feature_table_entry {
+ unsigned int selector;
+ feature_call function;
+};
+
+struct pmac_mb_def
+{
+ const char* model_string;
+ const char* model_name;
+ int model_id;
+ struct feature_table_entry* features;
+ unsigned long board_flags;
+};
+static struct pmac_mb_def pmac_mb __pmacdata;
+
+/*
+ * Here are the chip specific feature functions
+ */
+
+static inline int __pmac
+simple_feature_tweak(struct device_node* node, int type, int reg, u32 mask, int value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ macio = macio_find(node, type);
+ if (!macio)
+ return -ENODEV;
+ LOCK(flags);
+ if (value)
+ MACIO_BIS(reg, mask);
+ else
+ MACIO_BIC(reg, mask);
+ (void)MACIO_IN32(reg);
+ UNLOCK(flags);
+
+ return 0;
+}
+
+static int __pmac
+generic_scc_enable(struct device_node* node, u32 enable_mask, u32 reset_mask,
+ int param, int value)
+{
+ struct macio_chip* macio;
+ unsigned long chan_mask;
+ unsigned long fcr;
+ unsigned long flags;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ if (!strcmp(node->name, "ch-a"))
+ chan_mask = MACIO_FLAG_SCCA_ON;
+ else if (!strcmp(node->name, "ch-b"))
+ chan_mask = MACIO_FLAG_SCCB_ON;
+ else
+ return -ENODEV;
+
+ if (value) {
+ LOCK(flags);
+ fcr = MACIO_IN32(OHARE_FCR);
+ /* Check if scc cell need enabling */
+ if (!(fcr & OH_SCC_ENABLE)) {
+ fcr |= enable_mask;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ fcr |= reset_mask;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ UNLOCK(flags);
+ (void)MACIO_IN32(OHARE_FCR);
+ mdelay(15);
+ LOCK(flags);
+ fcr &= ~reset_mask;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ }
+ if (chan_mask & MACIO_FLAG_SCCA_ON)
+ fcr |= OH_SCCA_IO;
+ if (chan_mask & MACIO_FLAG_SCCB_ON)
+ fcr |= OH_SCCB_IO;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ macio->flags |= chan_mask;
+ UNLOCK(flags);
+ if (param & PMAC_SCC_FLAG_XMON)
+ macio->flags |= MACIO_FLAG_SCC_LOCKED;
+ } else {
+ if (macio->flags & MACIO_FLAG_SCC_LOCKED)
+ return -EPERM;
+ LOCK(flags);
+ fcr = MACIO_IN32(OHARE_FCR);
+ if (chan_mask & MACIO_FLAG_SCCA_ON)
+ fcr &= ~OH_SCCA_IO;
+ if (chan_mask & MACIO_FLAG_SCCB_ON)
+ fcr &= ~OH_SCCB_IO;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) {
+ fcr &= ~enable_mask;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ }
+ macio->flags &= ~(chan_mask);
+ UNLOCK(flags);
+ mdelay(10);
+ }
+ return 0;
+}
+
+static int __pmac
+ohare_scc_enable(struct device_node* node, int param, int value)
+{
+ int rc;
+
+#ifdef CONFIG_ADB_PMU
+ if (value && (param & 0xfff) == PMAC_SCC_IRDA)
+ pmu_enable_irled(1);
+#endif /* CONFIG_ADB_PMU */
+ rc = generic_scc_enable(node, OH_SCC_ENABLE, OH_SCC_RESET, param, value);
+#ifdef CONFIG_ADB_PMU
+ if ((param & 0xfff) == PMAC_SCC_IRDA && (rc || !value))
+ pmu_enable_irled(0);
+#endif /* CONFIG_ADB_PMU */
+ return rc;
+}
+
+static int __pmac
+ohare_floppy_enable(struct device_node* node, int param, int value)
+{
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_FLOPPY_ENABLE, value);
+}
+
+static int __pmac
+ohare_mesh_enable(struct device_node* node, int param, int value)
+{
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_MESH_ENABLE, value);
+}
+
+static int __pmac
+ohare_ide_enable(struct device_node* node, int param, int value)
+{
+ switch(param) {
+ case 0:
+ /* For some reason, setting the bit in set_initial_features()
+ * doesn't stick. I'm still investigating... --BenH.
+ */
+ if (value)
+ simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_IOBUS_ENABLE, 1);
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_IDE0_ENABLE, value);
+ case 1:
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_BAY_IDE_ENABLE, value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static int __pmac
+ohare_ide_reset(struct device_node* node, int param, int value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_IDE0_RESET_N, !value);
+ case 1:
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_IDE1_RESET_N, !value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static int __pmac
+ohare_sleep_state(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio = &macio_chips[0];
+
+ if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+ return -EPERM;
+ if (value) {
+ MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE);
+ } else {
+ MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+ }
+
+ return 0;
+}
+
+static int __pmac
+heathrow_scc_enable(struct device_node* node, int param, int value)
+{
+ int rc;
+
+#ifdef CONFIG_ADB_PMU
+ if (value && param == PMAC_SCC_IRDA)
+ pmu_enable_irled(1);
+#endif /* CONFIG_ADB_PMU */
+ /* Fixme: It's possible that wallstreet (heathrow) is different
+ * than other paddington machines. I still have to figure that
+ * out exactly, for now, the paddington values are used
+ */
+ rc = generic_scc_enable(node, HRW_SCC_ENABLE, PADD_RESET_SCC, param, value);
+#ifdef CONFIG_ADB_PMU
+ if (param == PMAC_SCC_IRDA && (rc || !value))
+ pmu_enable_irled(0);
+#endif /* CONFIG_ADB_PMU */
+ return rc;
+}
+
+static int __pmac
+heathrow_modem_enable(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio;
+ u8 gpio;
+ unsigned long flags;
+
+ macio = macio_find(node, macio_unknown);
+ if (!macio)
+ return -ENODEV;
+ gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1;
+ if (!value) {
+ LOCK(flags);
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
+ UNLOCK(flags);
+ (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+ mdelay(250);
+ }
+ if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
+ pmac_mb.model_id != PMAC_TYPE_YIKES) {
+ LOCK(flags);
+ /* We use the paddington values as they seem to work properly
+ * on the wallstreet (heathrow) as well. I can't tell why we
+ * had to flip them on older feature.c, the fact is that new
+ * code uses the paddington values which are also the ones used
+ * in Darwin, and that works on wallstreet !
+ */
+ if (value)
+ MACIO_BIC(HEATHROW_FCR, PADD_MODEM_POWER_N);
+ else
+ MACIO_BIS(HEATHROW_FCR, PADD_MODEM_POWER_N);
+ UNLOCK(flags);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ mdelay(250);
+ }
+ if (value) {
+ LOCK(flags);
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
+ (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
+ (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
+ (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ }
+ return 0;
+}
+
+static int __pmac
+heathrow_floppy_enable(struct device_node* node, int param, int value)
+{
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR,
+ HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE,
+ value);
+}
+
+static int __pmac
+heathrow_mesh_enable(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ macio = macio_find(node, macio_unknown);
+ if (!macio)
+ return -ENODEV;
+ LOCK(flags);
+ /* Set clear mesh cell enable */
+ if (value)
+ MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE);
+ else
+ MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ udelay(10);
+ /* Set/Clear termination power (todo: test ! the bit value
+ * used by Darwin doesn't seem to match what we used so
+ * far. If you experience problems, turn #if 1 into #if 0
+ * and tell me about it --BenH.
+ */
+#if 1
+ if (value)
+ MACIO_BIC(HEATHROW_MBCR, 0x00000004);
+ else
+ MACIO_BIS(HEATHROW_MBCR, 0x00000004);
+#else
+ if (value)
+ MACIO_BIC(HEATHROW_MBCR, 0x00040000);
+ else
+ MACIO_BIS(HEATHROW_MBCR, 0x00040000);
+#endif
+ (void)MACIO_IN32(HEATHROW_MBCR);
+ udelay(10);
+ UNLOCK(flags);
+
+ return 0;
+}
+
+static int __pmac
+heathrow_ide_enable(struct device_node* node, int param, int value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR, HRW_IDE0_ENABLE, value);
+ case 1:
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static int __pmac
+heathrow_ide_reset(struct device_node* node, int param, int value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR, HRW_IDE0_RESET_N, !value);
+ case 1:
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR, HRW_IDE1_RESET_N, !value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static int __pmac
+heathrow_bmac_enable(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ if (value) {
+ LOCK(flags);
+ MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
+ MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET);
+ UNLOCK(flags);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ mdelay(10);
+ LOCK(flags);
+ MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET);
+ UNLOCK(flags);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ mdelay(10);
+ } else {
+ LOCK(flags);
+ MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
+ UNLOCK(flags);
+ }
+ return 0;
+}
+
+static int __pmac
+heathrow_sound_enable(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ /* B&W G3 and Yikes don't support that properly (the
+ * sound appear to never come back after beeing shut down).
+ */
+ if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE ||
+ pmac_mb.model_id == PMAC_TYPE_YIKES)
+ return 0;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ if (value) {
+ LOCK(flags);
+ MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+ MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
+ UNLOCK(flags);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ } else {
+ LOCK(flags);
+ MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
+ MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+ UNLOCK(flags);
+ }
+ return 0;
+}
+
+static u32 save_fcr[5] __pmacdata;
+static u32 save_mbcr __pmacdata;
+static u32 save_gpio_levels[2] __pmacdata;
+static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT] __pmacdata;
+static u8 save_gpio_normal[KEYLARGO_GPIO_CNT] __pmacdata;
+static u32 save_unin_clock_ctl __pmacdata;
+static struct dbdma_regs save_dbdma[13] __pmacdata;
+static struct dbdma_regs save_alt_dbdma[13] __pmacdata;
+
+static void __pmac
+dbdma_save(struct macio_chip* macio, struct dbdma_regs* save)
+{
+ int i;
+
+ /* Save state & config of DBDMA channels */
+ for (i=0; i<13; i++) {
+ volatile struct dbdma_regs* chan = (volatile struct dbdma_regs*)
+ (macio->base + ((0x8000+i*0x100)>>2));
+ save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi);
+ save[i].cmdptr = in_le32(&chan->cmdptr);
+ save[i].intr_sel = in_le32(&chan->intr_sel);
+ save[i].br_sel = in_le32(&chan->br_sel);
+ save[i].wait_sel = in_le32(&chan->wait_sel);
+ }
+}
+
+static void __pmac
+dbdma_restore(struct macio_chip* macio, struct dbdma_regs* save)
+{
+ int i;
+
+ /* Save state & config of DBDMA channels */
+ for (i=0; i<13; i++) {
+ volatile struct dbdma_regs* chan = (volatile struct dbdma_regs*)
+ (macio->base + ((0x8000+i*0x100)>>2));
+ out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);
+ while (in_le32(&chan->status) & ACTIVE)
+ mb();
+ out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi);
+ out_le32(&chan->cmdptr, save[i].cmdptr);
+ out_le32(&chan->intr_sel, save[i].intr_sel);
+ out_le32(&chan->br_sel, save[i].br_sel);
+ out_le32(&chan->wait_sel, save[i].wait_sel);
+ }
+}
+
+static void __pmac
+heathrow_sleep(struct macio_chip* macio, int secondary)
+{
+ if (secondary) {
+ dbdma_save(macio, save_alt_dbdma);
+ save_fcr[2] = MACIO_IN32(0x38);
+ save_fcr[3] = MACIO_IN32(0x3c);
+ } else {
+ dbdma_save(macio, save_dbdma);
+ save_fcr[0] = MACIO_IN32(0x38);
+ save_fcr[1] = MACIO_IN32(0x3c);
+ save_mbcr = MACIO_IN32(0x34);
+ /* Make sure sound is shut down */
+ MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
+ MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+ /* This seems to be necessary as well or the fan
+ * keeps coming up and battery drains fast */
+ MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE);
+ }
+ /* Make sure modem is shut down */
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET,
+ MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1);
+ MACIO_BIS(HEATHROW_FCR, PADD_MODEM_POWER_N);
+ MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE);
+
+ /* Let things settle */
+ (void)MACIO_IN32(HEATHROW_FCR);
+ mdelay(1);
+}
+
+static void __pmac
+heathrow_wakeup(struct macio_chip* macio, int secondary)
+{
+ if (secondary) {
+ MACIO_OUT32(0x38, save_fcr[2]);
+ (void)MACIO_IN32(0x38);
+ mdelay(1);
+ MACIO_OUT32(0x3c, save_fcr[3]);
+ (void)MACIO_IN32(0x38);
+ mdelay(10);
+ dbdma_restore(macio, save_alt_dbdma);
+ } else {
+ MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE);
+ (void)MACIO_IN32(0x38);
+ mdelay(1);
+ MACIO_OUT32(0x3c, save_fcr[1]);
+ (void)MACIO_IN32(0x38);
+ mdelay(1);
+ MACIO_OUT32(0x34, save_mbcr);
+ (void)MACIO_IN32(0x38);
+ mdelay(10);
+ dbdma_restore(macio, save_dbdma);
+ }
+}
+
+static int __pmac
+heathrow_sleep_state(struct device_node* node, int param, int value)
+{
+ if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+ return -EPERM;
+ if (value == 1) {
+ if (macio_chips[1].type == macio_gatwick)
+ heathrow_sleep(&macio_chips[0], 1);
+ heathrow_sleep(&macio_chips[0], 0);
+ } else if (value == 0) {
+ heathrow_wakeup(&macio_chips[0], 0);
+ if (macio_chips[1].type == macio_gatwick)
+ heathrow_wakeup(&macio_chips[0], 1);
+ }
+ return 0;
+}
+
+static int __pmac
+core99_scc_enable(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+ unsigned long chan_mask;
+ u32 fcr;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ if (!strcmp(node->name, "ch-a"))
+ chan_mask = MACIO_FLAG_SCCA_ON;
+ else if (!strcmp(node->name, "ch-b"))
+ chan_mask = MACIO_FLAG_SCCB_ON;
+ else
+ return -ENODEV;
+
+ if (value) {
+ int need_reset_scc = 0;
+ int need_reset_irda = 0;
+
+ LOCK(flags);
+ fcr = MACIO_IN32(KEYLARGO_FCR0);
+ /* Check if scc cell need enabling */
+ if (!(fcr & KL0_SCC_CELL_ENABLE)) {
+ fcr |= KL0_SCC_CELL_ENABLE;
+ need_reset_scc = 1;
+ }
+ if (chan_mask & MACIO_FLAG_SCCA_ON) {
+ fcr |= KL0_SCCA_ENABLE;
+ /* Don't enable line drivers for I2S modem */
+ if ((param & 0xfff) == PMAC_SCC_I2S1)
+ fcr &= ~KL0_SCC_A_INTF_ENABLE;
+ else
+ fcr |= KL0_SCC_A_INTF_ENABLE;
+ }
+ if (chan_mask & MACIO_FLAG_SCCB_ON) {
+ fcr |= KL0_SCCB_ENABLE;
+ /* Perform irda specific inits */
+ if ((param & 0xfff) == PMAC_SCC_IRDA) {
+ fcr &= ~KL0_SCC_B_INTF_ENABLE;
+ fcr |= KL0_IRDA_ENABLE;
+ fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE;
+ fcr |= KL0_IRDA_SOURCE1_SEL;
+ fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
+ fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
+ need_reset_irda = 1;
+ } else
+ fcr |= KL0_SCC_B_INTF_ENABLE;
+ }
+ MACIO_OUT32(KEYLARGO_FCR0, fcr);
+ macio->flags |= chan_mask;
+ if (need_reset_scc) {
+ MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ UNLOCK(flags);
+ mdelay(15);
+ LOCK(flags);
+ MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET);
+ }
+ if (need_reset_irda) {
+ MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ UNLOCK(flags);
+ mdelay(15);
+ LOCK(flags);
+ MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET);
+ }
+ UNLOCK(flags);
+ if (param & PMAC_SCC_FLAG_XMON)
+ macio->flags |= MACIO_FLAG_SCC_LOCKED;
+ } else {
+ if (macio->flags & MACIO_FLAG_SCC_LOCKED)
+ return -EPERM;
+ LOCK(flags);
+ fcr = MACIO_IN32(KEYLARGO_FCR0);
+ if (chan_mask & MACIO_FLAG_SCCA_ON)
+ fcr &= ~KL0_SCCA_ENABLE;
+ if (chan_mask & MACIO_FLAG_SCCB_ON) {
+ fcr &= ~KL0_SCCB_ENABLE;
+ /* Perform irda specific clears */
+ if ((param & 0xfff) == PMAC_SCC_IRDA) {
+ fcr &= ~KL0_IRDA_ENABLE;
+ fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE);
+ fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
+ fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
+ }
+ }
+ MACIO_OUT32(KEYLARGO_FCR0, fcr);
+ if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) {
+ fcr &= ~KL0_SCC_CELL_ENABLE;
+ MACIO_OUT32(KEYLARGO_FCR0, fcr);
+ }
+ macio->flags &= ~(chan_mask);
+ UNLOCK(flags);
+ mdelay(10);
+ }
+ return 0;
+}
+
+static int __pmac
+core99_modem_enable(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio;
+ u8 gpio;
+ unsigned long flags;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
+ gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
+ gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
+
+ if (!value) {
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+ UNLOCK(flags);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ mdelay(250);
+ }
+ LOCK(flags);
+ if (value) {
+ MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+ UNLOCK(flags);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ mdelay(250);
+ } else {
+ MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+ UNLOCK(flags);
+ }
+ if (value) {
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ }
+ return 0;
+}
+
+static int __pmac
+core99_ide_enable(struct device_node* node, int param, int value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value);
+ case 1:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value);
+ case 2:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_UIDE_ENABLE, value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static int __pmac
+core99_ide_reset(struct device_node* node, int param, int value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value);
+ case 1:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value);
+ case 2:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static int __pmac
+core99_gmac_enable(struct device_node* node, int param, int value)
+{
+ unsigned long flags;
+
+ LOCK(flags);
+ if (value)
+ UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
+ else
+ UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
+ (void)UN_IN(UNI_N_CLOCK_CNTL);
+ UNLOCK(flags);
+ udelay(20);
+
+ return 0;
+}
+
+static int __pmac
+core99_gmac_phy_reset(struct device_node* node, int param, int value)
+{
+ unsigned long flags;
+ struct macio_chip* macio;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea)
+ return -ENODEV;
+
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE);
+ (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET);
+ UNLOCK(flags);
+ mdelay(10);
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE
+ | KEYLARGO_GPIO_OUTOUT_DATA);
+ UNLOCK(flags);
+ mdelay(10);
+
+ return 0;
+}
+
+static int __pmac
+core99_sound_chip_enable(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+
+ /* Do a better probe code, screamer G4 desktops &
+ * iMacs can do that too, add a recalibrate in
+ * the driver as well
+ */
+ if (pmac_mb.model_id == PMAC_TYPE_PISMO ||
+ pmac_mb.model_id == PMAC_TYPE_TITANIUM) {
+ LOCK(flags);
+ if (value)
+ MACIO_OUT8(KL_GPIO_SOUND_POWER,
+ KEYLARGO_GPIO_OUTPUT_ENABLE |
+ KEYLARGO_GPIO_OUTOUT_DATA);
+ else
+ MACIO_OUT8(KL_GPIO_SOUND_POWER,
+ KEYLARGO_GPIO_OUTPUT_ENABLE);
+ (void)MACIO_IN8(KL_GPIO_SOUND_POWER);
+ UNLOCK(flags);
+ }
+ return 0;
+}
+
+static int __pmac
+core99_airport_enable(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+ int state;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+
+ /* Hint: we allow passing of macio itself for the sake of the
+ * sleep code
+ */
+ if (node != macio->of_node &&
+ (!node->parent || node->parent != macio->of_node))
+ return -ENODEV;
+ state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0;
+ if (value == state)
+ return 0;
+ if (value) {
+ /* This code is a reproduction of OF enable-cardslot
+ * and init-wireless methods, slightly hacked until
+ * I got it working.
+ */
+ LOCK(flags);
+ MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5);
+ (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
+ UNLOCK(flags);
+ mdelay(10);
+ LOCK(flags);
+ MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4);
+ (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
+ UNLOCK(flags);
+
+ mdelay(10);
+
+ LOCK(flags);
+ MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0);
+ (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28);
+ (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28);
+ (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28);
+ (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28);
+ (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe);
+ UNLOCK(flags);
+ udelay(10);
+ MACIO_OUT32(0x1c000, 0);
+ mdelay(1);
+ MACIO_OUT8(0x1a3e0, 0x41);
+ (void)MACIO_IN8(0x1a3e0);
+ udelay(10);
+ LOCK(flags);
+ MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ UNLOCK(flags);
+ mdelay(100);
+
+ macio->flags |= MACIO_FLAG_AIRPORT_ON;
+ } else {
+ LOCK(flags);
+ MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ MACIO_OUT8(KL_GPIO_AIRPORT_0, 0);
+ MACIO_OUT8(KL_GPIO_AIRPORT_1, 0);
+ MACIO_OUT8(KL_GPIO_AIRPORT_2, 0);
+ MACIO_OUT8(KL_GPIO_AIRPORT_3, 0);
+ MACIO_OUT8(KL_GPIO_AIRPORT_4, 0);
+ (void)MACIO_IN8(KL_GPIO_AIRPORT_4);
+ UNLOCK(flags);
+
+ macio->flags &= ~MACIO_FLAG_AIRPORT_ON;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_SMP
+static int __pmac
+core99_reset_cpu(struct device_node* node, int param, int value)
+{
+ const int reset_lines[] = { KL_GPIO_RESET_CPU0,
+ KL_GPIO_RESET_CPU1,
+ KL_GPIO_RESET_CPU2,
+ KL_GPIO_RESET_CPU3 };
+ int reset_io;
+ unsigned long flags;
+ struct macio_chip* macio;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea)
+ return -ENODEV;
+ if (param > 3 || param < 0)
+ return -ENODEV;
+
+ reset_io = reset_lines[param];
+
+ LOCK(flags);
+ MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
+ (void)MACIO_IN8(reset_io);
+ udelay(1);
+ MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(reset_io);
+ UNLOCK(flags);
+
+ return 0;
+}
+#endif /* CONFIG_SMP */
+
+static int __pmac
+core99_usb_enable(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+ char* prop;
+ int number;
+ u32 reg;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea)
+ return -ENODEV;
+
+ prop = (char *)get_property(node, "AAPL,clock-id", NULL);
+ if (!prop)
+ return -ENODEV;
+ if (strncmp(prop, "usb0u048", strlen("usb0u048")) == 0)
+ number = 0;
+ else if (strncmp(prop, "usb1u148", strlen("usb1u148")) == 0)
+ number = 2;
+ else
+ return -ENODEV;
+
+ /* Sorry for the brute-force locking, but this is only used during
+ * sleep and the timing seem to be critical
+ */
+ LOCK(flags);
+ if (value) {
+ /* Turn ON */
+ if (number == 0) {
+ MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ UNLOCK(flags);
+ mdelay(1);
+ LOCK(flags);
+ MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
+ } else {
+ MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
+ UNLOCK(flags);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ mdelay(1);
+ LOCK(flags);
+ MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
+ }
+ reg = MACIO_IN32(KEYLARGO_FCR4);
+ reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
+ KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number));
+ reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
+ KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1));
+ MACIO_OUT32(KEYLARGO_FCR4, reg);
+ (void)MACIO_IN32(KEYLARGO_FCR4);
+ udelay(10);
+ } else {
+ /* Turn OFF */
+ reg = MACIO_IN32(KEYLARGO_FCR4);
+ reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
+ KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number);
+ reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
+ KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1);
+ MACIO_OUT32(KEYLARGO_FCR4, reg);
+ (void)MACIO_IN32(KEYLARGO_FCR4);
+ udelay(1);
+ if (number == 0) {
+ MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ udelay(1);
+ MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ } else {
+ MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ udelay(1);
+ MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ }
+ udelay(1);
+ }
+ UNLOCK(flags);
+
+ return 0;
+}
+
+static int __pmac
+core99_firewire_enable(struct device_node* node, int param, int value)
+{
+ unsigned long flags;
+ struct macio_chip* macio;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea)
+ return -ENODEV;
+ if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
+ return -ENODEV;
+
+ LOCK(flags);
+ if (value) {
+ UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
+ (void)UN_IN(UNI_N_CLOCK_CNTL);
+ } else {
+ UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
+ (void)UN_IN(UNI_N_CLOCK_CNTL);
+ }
+ UNLOCK(flags);
+ mdelay(1);
+
+ return 0;
+}
+
+static int __pmac
+core99_firewire_cable_power(struct device_node* node, int param, int value)
+{
+ unsigned long flags;
+ struct macio_chip* macio;
+
+ /* Trick: we allow NULL node */
+ if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0)
+ return -ENODEV;
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea)
+ return -ENODEV;
+ if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
+ return -ENODEV;
+
+ LOCK(flags);
+ if (value) {
+ MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0);
+ MACIO_IN8(KL_GPIO_FW_CABLE_POWER);
+ udelay(10);
+ } else {
+ MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4);
+ MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10);
+ }
+ UNLOCK(flags);
+ mdelay(1);
+
+ return 0;
+}
+
+static int __pmac
+core99_read_gpio(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio = &macio_chips[0];
+
+ return MACIO_IN8(param);
+}
+
+
+static int __pmac
+core99_write_gpio(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio = &macio_chips[0];
+
+ MACIO_OUT8(param, (u8)(value & 0xff));
+ return 0;
+}
+
+static void __pmac
+keylargo_shutdown(struct macio_chip* macio, int restart)
+{
+ u32 temp;
+
+ mdelay(1);
+ MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ mdelay(100);
+
+ MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+ KL0_SCC_CELL_ENABLE |
+ KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE |
+ KL0_IRDA_CLK19_ENABLE);
+
+ (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
+ MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
+ (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
+
+ MACIO_BIC(KEYLARGO_FCR1,
+ KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
+ KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
+ KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+ KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+ KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+ KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N |
+ KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N |
+ KL1_UIDE_ENABLE);
+ (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
+
+ MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+ udelay(10);
+ MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE);
+ udelay(10);
+ temp = MACIO_IN32(KEYLARGO_FCR3);
+ if (macio->rev >= 2)
+ temp |= (KL3_SHUTDOWN_PLL2X | KL3_SHUTDOWN_PLL_TOTAL);
+
+ temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
+ KL3_SHUTDOWN_PLLKW35 | KL3_SHUTDOWN_PLLKW12;
+ temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
+ | KL3_CLK31_ENABLE | KL3_TIMER_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE
+ | KL3_I2S0_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
+ MACIO_OUT32(KEYLARGO_FCR3, temp);
+ (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
+}
+
+static void __pmac
+pangea_shutdown(struct macio_chip* macio, int restart)
+{
+ u32 temp;
+
+ MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+ KL0_SCC_CELL_ENABLE |
+ KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE);
+
+ (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
+ MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
+ (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
+
+ MACIO_BIC(KEYLARGO_FCR1,
+ KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
+ KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
+ KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+ KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+ KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+ KL1_UIDE_ENABLE);
+ (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
+
+ MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+ udelay(10);
+ temp = MACIO_IN32(KEYLARGO_FCR3);
+ temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
+ KL3_SHUTDOWN_PLLKW35;
+ temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
+ | KL3_CLK31_ENABLE | KL3_TIMER_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE
+ | KL3_I2S0_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
+ MACIO_OUT32(KEYLARGO_FCR3, temp);
+ (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
+}
+
+static int __pmac
+core99_sleep(void)
+{
+ struct macio_chip* macio;
+ int i;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea)
+ return -ENODEV;
+
+ /* We power off the wireless slot in case it was not done
+ * by the driver. We don't power it on automatically however
+ */
+ if (macio->flags & MACIO_FLAG_AIRPORT_ON)
+ core99_airport_enable(macio->of_node, 0, 0);
+
+ /* We power off the FW cable. Should be done by the driver... */
+ if (macio->flags & MACIO_FLAG_FW_SUPPORTED) {
+ core99_firewire_enable(NULL, 0, 0);
+ core99_firewire_cable_power(NULL, 0, 0);
+ }
+
+ /* We make sure int. modem is off (in case driver lost it) */
+ core99_modem_enable(macio->of_node, 0, 0);
+ /* We make sure the sound is off as well */
+ core99_sound_chip_enable(macio->of_node, 0, 0);
+
+ /*
+ * Save various bits of KeyLargo
+ */
+
+ /* Save the state of the various GPIOs */
+ save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0);
+ save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1);
+ for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
+ save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i);
+ for (i=0; i<KEYLARGO_GPIO_CNT; i++)
+ save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i);
+
+ /* Save the FCRs */
+ save_mbcr = MACIO_IN32(KEYLARGO_MBCR);
+ save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0);
+ save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1);
+ save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2);
+ save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3);
+ save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4);
+
+ /* Save state & config of DBDMA channels */
+ dbdma_save(macio, save_dbdma);
+
+ /*
+ * Turn off as much as we can
+ */
+ if (macio->type == macio_pangea)
+ pangea_shutdown(macio, 0);
+ else if (macio->type == macio_keylargo)
+ keylargo_shutdown(macio, 0);
+
+ /*
+ * Put the host bridge to sleep
+ */
+
+ save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL);
+ UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl &
+ ~(UNI_N_CLOCK_CNTL_GMAC|UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/));
+ udelay(100);
+ UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
+ UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP);
+
+ /*
+ * FIXME: A bit of black magic with OpenPIC (don't ask me why)
+ */
+ if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
+ MACIO_BIS(0x506e0, 0x00400000);
+ MACIO_BIS(0x506e0, 0x80000000);
+ }
+ return 0;
+}
+
+static int __pmac
+core99_wake_up(void)
+{
+ struct macio_chip* macio;
+ int i;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea)
+ return -ENODEV;
+
+ /*
+ * Wakeup the host bridge
+ */
+ UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
+ udelay(10);
+ UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
+ udelay(10);
+
+ /*
+ * Restore KeyLargo
+ */
+
+ MACIO_OUT32(KEYLARGO_MBCR, save_mbcr);
+ (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]);
+ (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]);
+ (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]);
+ (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]);
+ (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]);
+ (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10);
+
+ dbdma_restore(macio, save_dbdma);
+
+ MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]);
+ MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]);
+ for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
+ MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]);
+ for (i=0; i<KEYLARGO_GPIO_CNT; i++)
+ MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]);
+
+ /* FIXME more black magic with OpenPIC ... */
+ if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
+ MACIO_BIC(0x506e0, 0x00400000);
+ MACIO_BIC(0x506e0, 0x80000000);
+ }
+
+ UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl);
+ udelay(100);
+
+ return 0;
+}
+
+static int __pmac
+core99_sleep_state(struct device_node* node, int param, int value)
+{
+ if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+ return -EPERM;
+ if (value == 1)
+ return core99_sleep();
+ else if (value == 0)
+ return core99_wake_up();
+ return 0;
+}
+
+static int __pmac
+pangea_modem_enable(struct device_node* node, int param, int value)
+{
+ struct macio_chip* macio;
+ u8 gpio;
+ unsigned long flags;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
+ gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
+ gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
+
+ if (!value) {
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+ UNLOCK(flags);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ mdelay(250);
+ }
+ LOCK(flags);
+ if (value) {
+ MACIO_OUT8(KL_GPIO_MODEM_POWER,
+ KEYLARGO_GPIO_OUTPUT_ENABLE);
+ UNLOCK(flags);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ mdelay(250);
+ } else {
+ MACIO_OUT8(KL_GPIO_MODEM_POWER,
+ KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
+ UNLOCK(flags);
+ }
+ if (value) {
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ }
+ return 0;
+}
+
+
+static int __pmac
+generic_get_mb_info(struct device_node* node, int param, int value)
+{
+ switch(param) {
+ case PMAC_MB_INFO_MODEL:
+ return pmac_mb.model_id;
+ case PMAC_MB_INFO_FLAGS:
+ return pmac_mb.board_flags;
+ case PMAC_MB_INFO_NAME:
+ /* hack hack hack... but should work */
+ return (int)pmac_mb.model_name;
+ }
+ return 0;
+}
+
+
+/*
+ * Table definitions
+ */
+
+/* Used on any machine
+ */
+static struct feature_table_entry any_features[] __pmacdata = {
+ { PMAC_FTR_GET_MB_INFO, generic_get_mb_info },
+ { 0, NULL }
+};
+
+/* OHare based motherboards. Currently, we only use these on the
+ * 2400,3400 and 3500 series powerbooks. Some older desktops seem
+ * to have issues with turning on/off those asic cells
+ */
+static struct feature_table_entry ohare_features[] __pmacdata = {
+ { PMAC_FTR_SCC_ENABLE, ohare_scc_enable },
+ { PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable },
+ { PMAC_FTR_MESH_ENABLE, ohare_mesh_enable },
+ { PMAC_FTR_IDE_ENABLE, ohare_ide_enable},
+ { PMAC_FTR_IDE_RESET, ohare_ide_reset},
+ { PMAC_FTR_SLEEP_STATE, ohare_sleep_state },
+ { 0, NULL }
+};
+
+/* Heathrow desktop machines (Beige G3).
+ * Separated as some features couldn't be properly tested
+ * and the serial port control bits appear to confuse it.
+ */
+static struct feature_table_entry heathrow_desktop_features[] __pmacdata = {
+ { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
+ { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
+ { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
+ { PMAC_FTR_IDE_RESET, heathrow_ide_reset },
+ { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
+ { 0, NULL }
+};
+
+/* Heathrow based laptop, that is the Wallstreet and mainstreet
+ * powerbooks.
+ */
+static struct feature_table_entry heathrow_laptop_features[] __pmacdata = {
+ { PMAC_FTR_SCC_ENABLE, heathrow_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
+ { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
+ { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
+ { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
+ { PMAC_FTR_IDE_RESET, heathrow_ide_reset },
+ { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
+ { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
+ { 0, NULL }
+};
+
+/* Paddington based machines
+ * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4.
+ */
+static struct feature_table_entry paddington_features[] __pmacdata = {
+ { PMAC_FTR_SCC_ENABLE, heathrow_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
+ { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
+ { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
+ { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
+ { PMAC_FTR_IDE_RESET, heathrow_ide_reset },
+ { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
+ { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
+ { 0, NULL }
+};
+
+/* Core99 & MacRISC 2 machines (all machines released since the
+ * iBook (included), that is all AGP machines, except pangea
+ * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo
+ * used on iBook2 & iMac "flow power".
+ */
+static struct feature_table_entry core99_features[] __pmacdata = {
+ { PMAC_FTR_SCC_ENABLE, core99_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, core99_modem_enable },
+ { PMAC_FTR_IDE_ENABLE, core99_ide_enable },
+ { PMAC_FTR_IDE_RESET, core99_ide_reset },
+ { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
+ { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
+ { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
+ { PMAC_FTR_USB_ENABLE, core99_usb_enable },
+ { PMAC_FTR_1394_ENABLE, core99_firewire_enable },
+ { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
+ { PMAC_FTR_SLEEP_STATE, core99_sleep_state },
+#ifdef CONFIG_SMP
+ { PMAC_FTR_RESET_CPU, core99_reset_cpu },
+#endif /* CONFIG_SMP */
+ { PMAC_FTR_READ_GPIO, core99_read_gpio },
+ { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
+ { 0, NULL }
+};
+
+/* Pangea features
+ */
+static struct feature_table_entry pangea_features[] __pmacdata = {
+ { PMAC_FTR_SCC_ENABLE, core99_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable },
+ { PMAC_FTR_IDE_ENABLE, core99_ide_enable },
+ { PMAC_FTR_IDE_RESET, core99_ide_reset },
+ { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
+ { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
+ { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
+ { PMAC_FTR_USB_ENABLE, core99_usb_enable },
+ { PMAC_FTR_1394_ENABLE, core99_firewire_enable },
+ { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
+ { PMAC_FTR_SLEEP_STATE, core99_sleep_state },
+ { PMAC_FTR_READ_GPIO, core99_read_gpio },
+ { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
+ { 0, NULL }
+};
+
+static struct pmac_mb_def pmac_mb_defs[] __pmacdata = {
+ /* Warning: ordering is important as some models may claim
+ * beeing compatible with several types
+ */
+ { "AAPL,8500", "PowerMac 8500/8600",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,9500", "PowerMac 9500/9600",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,7500", "PowerMac 7500",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,e407", "Alchemy",
+ PMAC_TYPE_ALCHEMY, NULL,
+ 0
+ },
+ { "AAPL,e411", "Gazelle",
+ PMAC_TYPE_GAZELLE, NULL,
+ 0
+ },
+ { "AAPL,3400/2400", "PowerBook 3400",
+ PMAC_TYPE_HOOPER, ohare_features,
+ PMAC_MB_CAN_SLEEP
+ },
+ { "AAPL,3500", "PowerBook 3500",
+ PMAC_TYPE_KANGA, ohare_features,
+ PMAC_MB_CAN_SLEEP
+ },
+ { "AAPL,Gossamer", "PowerMac G3 (Gossamer)",
+ PMAC_TYPE_GOSSAMER, heathrow_desktop_features,
+ 0
+ },
+ { "AAPL,PowerMac G3", "PowerMac G3 (Silk)",
+ PMAC_TYPE_SILK, heathrow_desktop_features,
+ 0
+ },
+ { "AAPL,PowerBook1998", "PowerBook Wallstreet",
+ PMAC_TYPE_WALLSTREET, heathrow_laptop_features,
+ PMAC_MB_CAN_SLEEP
+ },
+ { "AAPL,PowerBook1,1", "PowerBook 101 (Lombard)",
+ PMAC_TYPE_101_PBOOK, paddington_features,
+ PMAC_MB_CAN_SLEEP
+ },
+ { "iMac,1", "iMac (first generation)",
+ PMAC_TYPE_ORIG_IMAC, paddington_features,
+ 0
+ },
+ { "PowerMac4,1", "iMac \"Flower Power\"",
+ PMAC_TYPE_PANGEA_IMAC, pangea_features,
+ PMAC_MB_CAN_SLEEP
+ },
+ { "PowerBook4,1", "iBook 2",
+ PMAC_TYPE_IBOOK2, pangea_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
+ },
+ { "PowerMac1,1", "Blue&White G3",
+ PMAC_TYPE_YOSEMITE, paddington_features,
+ 0
+ },
+ { "PowerMac1,2", "PowerMac G4 PCI Graphics",
+ PMAC_TYPE_YIKES, paddington_features,
+ 0
+ },
+ { "PowerBook2,1", "iBook (first generation)",
+ PMAC_TYPE_ORIG_IBOOK, core99_features,
+ PMAC_MB_CAN_SLEEP
+ },
+ { "PowerMac3,1", "PowerMac G4 AGP Graphics",
+ PMAC_TYPE_SAWTOOTH, core99_features,
+ 0
+ },
+ { "PowerMac3,2", "PowerMac G4 AGP Graphics",
+ PMAC_TYPE_SAWTOOTH, core99_features,
+ 0
+ },
+ { "PowerMac3,3", "PowerMac G4 AGP Graphics",
+ PMAC_TYPE_SAWTOOTH, core99_features,
+ 0
+ },
+ { "PowerMac2,1", "iMac FireWire",
+ PMAC_TYPE_FW_IMAC, core99_features,
+ PMAC_MB_CAN_SLEEP
+ },
+ { "PowerMac2,2", "iMac FireWire",
+ PMAC_TYPE_FW_IMAC, core99_features,
+ PMAC_MB_CAN_SLEEP
+ },
+ { "PowerBook2,2", "iBook FireWire",
+ PMAC_TYPE_FW_IBOOK, core99_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
+ },
+ { "PowerMac5,1", "PowerMac G4 Cube",
+ PMAC_TYPE_CUBE, core99_features,
+ },
+ { "PowerMac3,4", "PowerMac G4 Silver",
+ PMAC_TYPE_QUICKSILVER, core99_features,
+ 0
+ },
+ { "PowerMac3,5", "PowerMac G4 Silver",
+ PMAC_TYPE_QUICKSILVER, core99_features,
+ 0
+ },
+ { "PowerBook3,1", "PowerBook Pismo",
+ PMAC_TYPE_PISMO, core99_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
+ },
+ { "PowerBook3,2", "PowerBook Titanium",
+ PMAC_TYPE_TITANIUM, core99_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
+ },
+ { "PowerBook3,3", "PowerBook Titanium II",
+ PMAC_TYPE_TITANIUM2, core99_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
+ },
+};
+
+/*
+ * The toplevel feature_call callback
+ */
+int __pmac
+pmac_do_feature_call(unsigned int selector, ...)
+{
+ struct device_node* node;
+ int param, value, i;
+ feature_call func = NULL;
+ va_list args;
+
+ if (!pmac_mb.features)
+ return -ENODEV;
+ for (i=0; pmac_mb.features[i].function; i++)
+ if (pmac_mb.features[i].selector == selector) {
+ func = pmac_mb.features[i].function;
+ break;
+ }
+ if (!func)
+ for (i=0; any_features[i].function; i++)
+ if (any_features[i].selector == selector) {
+ func = any_features[i].function;
+ break;
+ }
+ if (!func)
+ return -ENODEV;
+
+ va_start(args, selector);
+ node = (struct device_node*)va_arg(args, void*);
+ param = va_arg(args, int);
+ value = va_arg(args, int);
+ va_end(args);
+
+ return func(node, param, value);
+}
+
+static int __init
+probe_motherboard(void)
+{
+ int i;
+ struct macio_chip* macio = &macio_chips[0];
+
+ /* Lookup known motherboard type in device-tree */
+ for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
+ if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
+ pmac_mb = pmac_mb_defs[i];
+ goto found;
+ }
+ }
+
+ /* Fallback to selection depending on mac-io chip type */
+ switch(macio->type) {
+ case macio_grand_central:
+ pmac_mb.model_id = PMAC_TYPE_PSURGE;
+ pmac_mb.model_name = "Unknown PowerSurge";
+ break;
+ case macio_ohare:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE;
+ pmac_mb.model_name = "Unknown OHare-based";
+ break;
+ case macio_heathrow:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW;
+ pmac_mb.model_name = "Unknown Heathrow-based";
+ pmac_mb.features = heathrow_desktop_features;
+ break;
+ case macio_paddington:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON;
+ pmac_mb.model_name = "Unknown Paddington-based";
+ pmac_mb.features = paddington_features;
+ break;
+ case macio_keylargo:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99;
+ pmac_mb.model_name = "Unknown Keylargo-based";
+ pmac_mb.features = core99_features;
+ break;
+ case macio_pangea:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA;
+ pmac_mb.model_name = "Unknown Pangea-based";
+ pmac_mb.features = pangea_features;
+ break;
+ default:
+ return -ENODEV;
+ }
+found:
+ /* Fixup Hooper vs. Comet */
+ if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
+ u32* mach_id_ptr = (u32*)ioremap(0xf3000034, 4);
+ if (!mach_id_ptr)
+ return -ENODEV;
+ /* Here, I used to disable the media-bay on comet. It
+ * appears this is wrong, the floppy connector is actually
+ * a kind of media-bay and works with the current driver.
+ */
+ if ((*mach_id_ptr) & 0x20000000UL)
+ pmac_mb.model_id = PMAC_TYPE_COMET;
+ iounmap(mach_id_ptr);
+ }
+
+ /* Set default value of powersave_nap on machines that support it.
+ * It appears that uninorth rev 3 has a problem with it, we don't
+ * enable it on those. In theory, the flush-on-lock property is
+ * supposed to be set when not supported, but I'm not very confident
+ * that all Apple OF revs did it properly, I do it the paranoid way.
+ */
+ while (uninorth_base && uninorth_rev > 3) {
+ struct device_node* np = find_path_device("/cpus");
+ u32 pvr = mfspr(PVR);
+ if (!np || !np->child) {
+ printk(KERN_WARNING "Can't find CPU(s) in device tree !\n");
+ break;
+ }
+ np = np->child;
+ /* Nap mode not supported on SMP */
+ if (np->sibling)
+ break;
+ /* Nap mode not supported if flush-on-lock property is present */
+ if (get_property(np, "flush-on-lock", NULL))
+ break;
+ /* Some 7450 may have problem with NAP mode too ... */
+ if (((pvr >> 16) == 0x8000) && ((pvr & 0xffff) < 0x0201))
+ break;
+ powersave_nap = 1;
+ printk(KERN_INFO "Processor NAP mode on idle enabled.\n");
+ break;
+ }
+
+ printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
+ return 0;
+}
+
+/* Initialize the Core99 UniNorth host bridge and memory controller
+ */
+static void __init
+probe_uninorth(void)
+{
+ unsigned long actrl;
+
+ /* Locate core99 Uni-N */
+ uninorth_node = find_devices("uni-n");
+ if (uninorth_node && uninorth_node->n_addrs > 0) {
+ uninorth_base = ioremap(uninorth_node->addrs[0].address, 0x1000);
+ uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
+ } else
+ uninorth_node = NULL;
+
+ if (!uninorth_node)
+ return;
+
+ printk(KERN_INFO "Found Uninorth memory controller & host bridge, revision: %d\n",
+ uninorth_rev);
+
+ /* Set the arbitrer QAck delay according to what Apple does
+ */
+ if (uninorth_rev < 0x10) {
+ actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
+ actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
+ UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
+ UN_OUT(UNI_N_ARB_CTRL, actrl);
+ }
+}
+
+static void __init
+probe_one_macio(const char* name, const char* compat, int type)
+{
+ struct device_node* node;
+ int i;
+ volatile u32* base;
+ u32* revp;
+
+ node = find_devices(name);
+ if (!node || !node->n_addrs)
+ return;
+ if (compat)
+ do {
+ if (device_is_compatible(node, compat))
+ break;
+ node = node->next;
+ } while (node);
+ if (!node)
+ return;
+ for(i=0; i<MAX_MACIO_CHIPS; i++) {
+ if (!macio_chips[i].of_node)
+ break;
+ if (macio_chips[i].of_node == node)
+ return;
+ }
+ if (i >= MAX_MACIO_CHIPS) {
+ printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
+ printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
+ return;
+ }
+ base = (volatile u32*)ioremap(node->addrs[0].address, node->addrs[0].size);
+ if (!base) {
+ printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n");
+ return;
+ }
+ if (type == macio_keylargo) {
+ u32* did = (u32 *)get_property(node, "device-id", NULL);
+ if (*did == 0x00000025)
+ type = macio_pangea;
+ }
+ macio_chips[i].of_node = node;
+ macio_chips[i].type = type;
+ macio_chips[i].base = base;
+ macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
+ revp = (u32 *)get_property(node, "revision-id", NULL);
+ if (revp)
+ macio_chips[i].rev = *revp;
+ printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
+ macio_names[type], macio_chips[i].rev, macio_chips[i].base);
+}
+
+static int __init
+probe_macios(void)
+{
+ /* Warning, ordering is important */
+ probe_one_macio("gc", NULL, macio_grand_central);
+ probe_one_macio("ohare", NULL, macio_ohare);
+ probe_one_macio("pci106b,7", NULL, macio_ohareII);
+ probe_one_macio("mac-io", "keylargo", macio_keylargo);
+ probe_one_macio("mac-io", "paddington", macio_paddington);
+ probe_one_macio("mac-io", "gatwick", macio_gatwick);
+ probe_one_macio("mac-io", "heathrow", macio_heathrow);
+
+ /* Make sure the "main" macio chip appear first */
+ if (macio_chips[0].type == macio_gatwick
+ && macio_chips[1].type == macio_heathrow) {
+ struct macio_chip temp = macio_chips[0];
+ macio_chips[0] = macio_chips[1];
+ macio_chips[1] = temp;
+ }
+ if (macio_chips[0].type == macio_ohareII
+ && macio_chips[1].type == macio_ohare) {
+ struct macio_chip temp = macio_chips[0];
+ macio_chips[0] = macio_chips[1];
+ macio_chips[1] = temp;
+ }
+
+ return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
+}
+
+static void __init
+initial_serial_shutdown(struct device_node* np)
+{
+ int len;
+ struct slot_names_prop {
+ int count;
+ char name[1];
+ } *slots;
+ char *conn;
+ int port_type = PMAC_SCC_ASYNC;
+ int modem = 0;
+
+ slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
+ conn = get_property(np, "AAPL,connector", &len);
+ if (conn && (strcmp(conn, "infrared") == 0))
+ port_type = PMAC_SCC_IRDA;
+ else if (device_is_compatible(np, "cobalt"))
+ modem = 1;
+ else if (slots && slots->count > 0) {
+ if (strcmp(slots->name, "IrDA") == 0)
+ port_type = PMAC_SCC_IRDA;
+ else if (strcmp(slots->name, "Modem") == 0)
+ modem = 1;
+ }
+ if (modem)
+ pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0);
+ pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0);
+}
+
+static void __init
+set_initial_features(void)
+{
+ struct device_node* np;
+
+ /* That hack appears to be necessary for some StarMax motherboards
+ * but I'm not too sure it was audited for side-effects on other
+ * ohare based machines...
+ * Since I still have difficulties figuring the right way to
+ * differenciate them all and since that hack was there for a long
+ * time, I'll keep it around
+ */
+ if (macio_chips[0].type == macio_ohare && !find_devices("via-pmu")) {
+ struct macio_chip* macio = &macio_chips[0];
+ MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
+ } else if (macio_chips[0].type == macio_ohare) {
+ struct macio_chip* macio = &macio_chips[0];
+ MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+ } else if (macio_chips[1].type == macio_ohare) {
+ struct macio_chip* macio = &macio_chips[1];
+ MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+ }
+
+ if (macio_chips[0].type == macio_keylargo ||
+ macio_chips[0].type == macio_pangea) {
+ /* Enable GMAC for now for PCI probing. It will be disabled
+ * later on after PCI probe
+ */
+ np = find_devices("ethernet");
+ while(np) {
+ if (np->parent
+ && device_is_compatible(np->parent, "uni-north")
+ && device_is_compatible(np, "gmac"))
+ core99_gmac_enable(np, 0, 1);
+ np = np->next;
+ }
+
+ /* Enable FW before PCI probe. Will be disabled later on
+ * Note: We should have a batter way to check that we are
+ * dealing with uninorth internal cell and not a PCI cell
+ * on the external PCI. The code below works though.
+ */
+ np = find_devices("firewire");
+ while(np) {
+ if (np->parent
+ && device_is_compatible(np->parent, "uni-north")
+ && (device_is_compatible(np, "pci106b,18") ||
+ device_is_compatible(np, "pci106b,30") ||
+ device_is_compatible(np, "pci11c1,5811"))) {
+ macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
+ core99_firewire_enable(np, 0, 1);
+ }
+ np = np->next;
+ }
+
+ /* Switch airport off */
+ np = find_devices("radio");
+ while(np) {
+ if (np && np->parent == macio_chips[0].of_node) {
+ macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
+ core99_airport_enable(np, 0, 0);
+ }
+ np = np->next;
+ }
+ }
+
+ /* On all machines, switch sound off */
+ if (macio_chips[0].of_node)
+ pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE,
+ macio_chips[0].of_node, 0, 0);
+
+ /* On all machines, switch modem & serial ports off */
+ np = find_devices("ch-a");
+ while(np) {
+ initial_serial_shutdown(np);
+ np = np->next;
+ }
+ np = find_devices("ch-b");
+ while(np) {
+ initial_serial_shutdown(np);
+ np = np->next;
+ }
+
+ /* Let hardware settle down */
+ mdelay(10);
+}
+
+void __init
+pmac_feature_init(void)
+{
+ /* Detect the UniNorth memory controller */
+ probe_uninorth();
+
+ /* Probe mac-io controllers */
+ if (probe_macios()) {
+ printk(KERN_WARNING "No mac-io chip found\n");
+ return;
+ }
+
+ /* Probe machine type */
+ if (probe_motherboard())
+ printk(KERN_WARNING "Unknown PowerMac !\n");
+
+ /* Set some initial features (turn off some chips that will
+ * be later turned on)
+ */
+ set_initial_features();
+}
+
+void __init
+pmac_feature_late_init(void)
+{
+ struct device_node* np;
+
+ /* Request some resources late */
+ if (uninorth_node)
+ request_OF_resource(uninorth_node, 0, NULL);
+ np = find_devices("hammerhead");
+ if (np)
+ request_OF_resource(np, 0, NULL);
+ np = find_devices("interrupt-controller");
+ if (np)
+ request_OF_resource(np, 0, NULL);
+}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)