patch-2.4.19 linux-2.4.19/arch/ppc64/kernel/ppc-stub.c

• Lines: 740
• Date: Fri Aug 2 17:39:43 2002
• Orig file: linux-2.4.18/arch/ppc64/kernel/ppc-stub.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -urN linux-2.4.18/arch/ppc64/kernel/ppc-stub.c linux-2.4.19/arch/ppc64/kernel/ppc-stub.c
@@ -0,0 +1,739 @@
+/* 
+ * ppc-stub.c:  KGDB support for the Linux kernel.
+ *
+ * adapted from arch/sparc/kernel/sparc-stub.c for the PowerPC
+ * some stuff borrowed from Paul Mackerras' xmon
+ * Copyright (C) 1998 Michael AK Tesch (tesch@cs.wisc.edu)
+ *
+ * Modifications to run under Linux
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * This file originally came from the gdb sources, and the
+ * copyright notices have been retained below.
+ */
+
+/****************************************************************************
+
+		THIS SOFTWARE IS NOT COPYRIGHTED
+
+   HP offers the following for use in the public domain.  HP makes no
+   warranty with regard to the software or its performance and the
+   user accepts the software "AS IS" with all faults.
+
+   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+/****************************************************************************
+ *  Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
+ *
+ *  Module name: remcom.c $
+ *  Revision: 1.34 $
+ *  Date: 91/03/09 12:29:49 $
+ *  Contributor:     Lake Stevens Instrument Division$
+ *
+ *  Description:     low level support for gdb debugger. $
+ *
+ *  Considerations:  only works on target hardware $
+ *
+ *  Written by:      Glenn Engel $
+ *  ModuleState:     Experimental $
+ *
+ *  NOTES:           See Below $
+ *
+ *  Modified for SPARC by Stu Grossman, Cygnus Support.
+ *
+ *  This code has been extensively tested on the Fujitsu SPARClite demo board.
+ *
+ *  To enable debugger support, two things need to happen.  One, a
+ *  call to set_debug_traps() is necessary in order to allow any breakpoints
+ *  or error conditions to be properly intercepted and reported to gdb.
+ *  Two, a breakpoint needs to be generated to begin communication.  This
+ *  is most easily accomplished by a call to breakpoint().  Breakpoint()
+ *  simulates a breakpoint by executing a trap #1.
+ *
+ *************
+ *
+ *    The following gdb commands are supported:
+ *
+ * command          function                               Return value
+ *
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ *    qOffsets      Get section offsets.  Reply is Text=xxx;Data=yyy;Bss=zzz
+ *
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ *
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ *
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ *
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ *
+ *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
+ *							   baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum.  A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: <two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ *
+ ****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+
+#include <asm/system.h>
+#include <asm/signal.h>
+#include <asm/kgdb.h>
+#include <asm/pgtable.h>
+#include <asm/ptrace.h>
+
+void breakinst(void);
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers
+ * at least NUMREGBYTES*2 are needed for register packets
+ */
+#define BUFMAX 2048
+static char remcomInBuffer[BUFMAX];
+static char remcomOutBuffer[BUFMAX];
+
+static int initialized = 0;
+static int kgdb_active = 0;
+static int kgdb_started = 0;
+static u_int fault_jmp_buf[100];
+static int kdebug;
+
+static const char hexchars[]="0123456789abcdef";
+
+/* Place where we save old trap entries for restoration - sparc*/
+/* struct tt_entry kgdb_savettable[256]; */
+/* typedef void (*trapfunc_t)(void); */
+
+#if 0
+/* Install an exception handler for kgdb */
+static void exceptionHandler(int tnum, unsigned int *tfunc)
+{
+	/* We are dorking with a live trap table, all irqs off */
+}
+#endif
+
+int
+kgdb_setjmp(long *buf)
+{
+	asm ("mflr 0; stw 0,0(%0);"
+	     "stw 1,4(%0); stw 2,8(%0);"
+	     "mfcr 0; stw 0,12(%0);"
+	     "stmw 13,16(%0)"
+	     : : "r" (buf));
+	/* XXX should save fp regs as well */
+	return 0;
+}
+void
+kgdb_longjmp(long *buf, int val)
+{
+	if (val == 0)
+		val = 1;
+	asm ("lmw 13,16(%0);"
+	     "lwz 0,12(%0); mtcrf 0x38,0;"
+	     "lwz 0,0(%0); lwz 1,4(%0); lwz 2,8(%0);"
+	     "mtlr 0; mr 3,%1"
+	     : : "r" (buf), "r" (val));
+}
+/* Convert ch from a hex digit to an int */
+static int
+hex(unsigned char ch)
+{
+	if (ch >= 'a' && ch <= 'f')
+		return ch-'a'+10;
+	if (ch >= '0' && ch <= '9')
+		return ch-'0';
+	if (ch >= 'A' && ch <= 'F')
+		return ch-'A'+10;
+	return -1;
+}
+
+/* Convert the memory pointed to by mem into hex, placing result in buf.
+ * Return a pointer to the last char put in buf (null), in case of mem fault,
+ * return 0.
+ */
+static unsigned char *
+mem2hex(char *mem, char *buf, int count)
+{
+	unsigned char ch;
+
+	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
+		debugger_fault_handler = kgdb_fault_handler;
+		while (count-- > 0) {
+			ch = *mem++;
+			*buf++ = hexchars[ch >> 4];
+			*buf++ = hexchars[ch & 0xf];
+		}
+	} else {
+		/* error condition */
+	}
+	debugger_fault_handler = 0;
+	*buf = 0;
+	return buf;
+}
+
+/* convert the hex array pointed to by buf into binary to be placed in mem
+ * return a pointer to the character AFTER the last byte written.
+*/
+static char *
+hex2mem(char *buf, char *mem, int count)
+{
+	int i;
+	unsigned char ch;
+
+	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
+		debugger_fault_handler = kgdb_fault_handler;
+		for (i=0; i<count; i++) {
+			ch = hex(*buf++) << 4;
+			ch |= hex(*buf++);
+			*mem++ = ch;
+		}
+		flush_icache_range((int)mem, (int)mem+count);
+	} else {
+		/* error condition */
+	}
+	debugger_fault_handler = 0;
+	return mem;
+}
+
+/*
+ * While we find nice hex chars, build an int.
+ * Return number of chars processed.
+ */
+static int
+hexToInt(char **ptr, int *intValue)
+{
+	int numChars = 0;
+	int hexValue;
+
+	*intValue = 0;
+
+	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
+		debugger_fault_handler = kgdb_fault_handler;
+		while (**ptr) {
+			hexValue = hex(**ptr);
+			if (hexValue < 0)
+				break;
+
+			*intValue = (*intValue << 4) | hexValue;
+			numChars ++;
+
+			(*ptr)++;
+		}
+	} else {
+	     /* error condition */
+	}
+	debugger_fault_handler = 0;
+
+	return (numChars);
+}
+
+/* scan for the sequence $<data>#<checksum>     */
+static void
+getpacket(char *buffer)
+{
+	unsigned char checksum;
+	unsigned char xmitcsum;
+	int i;
+	int count;
+	unsigned char ch;
+
+	do {
+		/* wait around for the start character, ignore all other
+		 * characters */
+		while ((ch = (getDebugChar() & 0x7f)) != '$') ;
+
+		checksum = 0;
+		xmitcsum = -1;
+
+		count = 0;
+
+		/* now, read until a # or end of buffer is found */
+		while (count < BUFMAX) {
+			ch = getDebugChar() & 0x7f;
+			if (ch == '#')
+				break;
+			checksum = checksum + ch;
+			buffer[count] = ch;
+			count = count + 1;
+		}
+
+		if (count >= BUFMAX)
+			continue;
+
+		buffer[count] = 0;
+
+		if (ch == '#') {
+			xmitcsum = hex(getDebugChar() & 0x7f) << 4;
+			xmitcsum |= hex(getDebugChar() & 0x7f);
+			if (checksum != xmitcsum)
+				putDebugChar('-');	/* failed checksum */
+			else {
+				putDebugChar('+'); /* successful transfer */
+				/* if a sequence char is present, reply the ID */
+				if (buffer[2] == ':') {
+					putDebugChar(buffer[0]);
+					putDebugChar(buffer[1]);
+					/* remove sequence chars from buffer */
+					count = strlen(buffer);
+					for (i=3; i <= count; i++)
+						buffer[i-3] = buffer[i];
+				}
+			}
+		}
+	} while (checksum != xmitcsum);
+}
+
+/* send the packet in buffer.  */
+static void putpacket(unsigned char *buffer)
+{
+	unsigned char checksum;
+	int count;
+	unsigned char ch, recv;
+
+	/*  $<packet info>#<checksum>. */
+	do {
+		putDebugChar('$');
+		checksum = 0;
+		count = 0;
+
+		while ((ch = buffer[count])) {
+			putDebugChar(ch);
+			checksum += ch;
+			count += 1;
+		}
+
+		putDebugChar('#');
+		putDebugChar(hexchars[checksum >> 4]);
+		putDebugChar(hexchars[checksum & 0xf]);
+		recv = getDebugChar();
+	} while ((recv & 0x7f) != '+');
+}
+
+static void kgdb_flush_cache_all(void)
+{
+	flush_instruction_cache();
+}
+
+
+/* Set up exception handlers for tracing and breakpoints
+ * [could be called kgdb_init()]
+ */
+void set_debug_traps(void)
+{
+#if 0
+	unsigned char c;
+
+	save_and_cli(flags);
+
+	/* In case GDB is started before us, ack any packets (presumably
+	 * "$?#xx") sitting there.
+	 *
+	 * I've found this code causes more problems than it solves,
+	 * so that's why it's commented out.  GDB seems to work fine
+	 * now starting either before or after the kernel   -bwb
+	 */
+
+	while((c = getDebugChar()) != '$');
+	while((c = getDebugChar()) != '#');
+	c = getDebugChar(); /* eat first csum byte */
+	c = getDebugChar(); /* eat second csum byte */
+	putDebugChar('+'); /* ack it */
+#endif
+	debugger = kgdb;
+	debugger_bpt = kgdb_bpt;
+	debugger_sstep = kgdb_sstep;
+	debugger_iabr_match = kgdb_iabr_match;
+	debugger_dabr_match = kgdb_dabr_match;
+
+	initialized = 1;
+}
+
+static void kgdb_fault_handler(struct pt_regs *regs)
+{
+	kgdb_longjmp((long*)fault_jmp_buf, 1);
+}
+
+int kgdb_bpt(struct pt_regs *regs)
+{
+	handle_exception(regs);
+	return 1;
+}
+
+int kgdb_sstep(struct pt_regs *regs)
+{
+	handle_exception(regs);
+	return 1;
+}
+
+void kgdb(struct pt_regs *regs)
+{
+	handle_exception(regs);
+}
+
+int kgdb_iabr_match(struct pt_regs *regs)
+{
+	printk("kgdb doesn't support iabr, what?!?\n");
+	handle_exception(regs);
+	return 1;
+}
+
+int kgdb_dabr_match(struct pt_regs *regs)
+{
+	printk("kgdb doesn't support dabr, what?!?\n");
+	handle_exception(regs);
+	return 1;
+}
+
+/* Convert the SPARC hardware trap type code to a unix signal number. */
+/*
+ * This table contains the mapping between PowerPC hardware trap types, and
+ * signals, which are primarily what GDB understands.
+ */
+static struct hard_trap_info
+{
+	unsigned int tt;		/* Trap type code for powerpc */
+	unsigned char signo;		/* Signal that we map this trap into */
+} hard_trap_info[] = {
+	{ 0x200, SIGSEGV },			/* machine check */
+	{ 0x300, SIGSEGV },			/* address error (store) */
+	{ 0x400, SIGBUS },			/* instruction bus error */
+	{ 0x500, SIGINT },			/* interrupt */
+	{ 0x600, SIGBUS },			/* alingment */
+	{ 0x700, SIGTRAP },			/* breakpoint trap */
+	{ 0x800, SIGFPE },			/* fpu unavail */
+	{ 0x900, SIGALRM },			/* decrementer */
+	{ 0xa00, SIGILL },			/* reserved */
+	{ 0xb00, SIGILL },			/* reserved */
+	{ 0xc00, SIGCHLD },			/* syscall */
+	{ 0xd00, SIGTRAP },			/* single-step/watch */
+	{ 0xe00, SIGFPE },			/* fp assist */
+	{ 0, 0}				/* Must be last */
+};
+
+static int computeSignal(unsigned int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP;         /* default for things we don't know about */
+}
+
+#define PC_REGNUM 64
+#define SP_REGNUM 1
+
+/*
+ * This function does all command processing for interfacing to gdb.
+ */
+static void
+handle_exception (struct pt_regs *regs)
+{
+	int sigval;
+	int addr;
+	int length;
+	char *ptr;
+	unsigned long msr;
+
+	if (debugger_fault_handler) {
+		debugger_fault_handler(regs);
+		panic("kgdb longjump failed!\n");
+	}
+	if (kgdb_active) {
+		printk("interrupt while in kgdb, returning\n");
+		return;
+	}
+	kgdb_active = 1;
+	kgdb_started = 1;
+
+#ifdef KGDB_DEBUG
+	printk("kgdb: entering handle_exception; trap [0x%x]\n",
+	       (unsigned int)regs->trap);
+#endif
+
+	kgdb_interruptible(0);
+	lock_kernel();
+	msr = get_msr();
+	set_msr(msr & ~MSR_EE);	/* disable interrupts */
+
+	if (regs->nip == (unsigned long)breakinst) {
+		/* Skip over breakpoint trap insn */
+		regs->nip += 4;
+	}
+
+	/* reply to host that an exception has occurred */
+	sigval = computeSignal(regs->trap);
+	ptr = remcomOutBuffer;
+
+#if 0
+	*ptr++ = 'S';
+	*ptr++ = hexchars[sigval >> 4];
+	*ptr++ = hexchars[sigval & 0xf];
+#else
+	*ptr++ = 'T';
+	*ptr++ = hexchars[sigval >> 4];
+	*ptr++ = hexchars[sigval & 0xf];
+	*ptr++ = hexchars[PC_REGNUM >> 4];
+	*ptr++ = hexchars[PC_REGNUM & 0xf];
+	*ptr++ = ':';
+	ptr = mem2hex((char *)&regs->nip, ptr, 4);
+	*ptr++ = ';';
+	*ptr++ = hexchars[SP_REGNUM >> 4];
+	*ptr++ = hexchars[SP_REGNUM & 0xf];
+	*ptr++ = ':';
+	ptr = mem2hex(((char *)&regs) + SP_REGNUM*4, ptr, 4);
+	*ptr++ = ';';
+#endif
+
+	*ptr++ = 0;
+
+	putpacket(remcomOutBuffer);
+
+	/* XXX We may want to add some features dealing with poking the
+	 * XXX page tables, ... (look at sparc-stub.c for more info)
+	 * XXX also required hacking to the gdb sources directly...
+	 */
+
+	while (1) {
+		remcomOutBuffer[0] = 0;
+
+		getpacket(remcomInBuffer);
+		switch (remcomInBuffer[0]) {
+		case '?':               /* report most recent signal */
+			remcomOutBuffer[0] = 'S';
+			remcomOutBuffer[1] = hexchars[sigval >> 4];
+			remcomOutBuffer[2] = hexchars[sigval & 0xf];
+			remcomOutBuffer[3] = 0;
+			break;
+#if 0
+		case 'q': /* this screws up gdb for some reason...*/
+		{
+			extern long _start, sdata, __bss_start;
+
+			ptr = &remcomInBuffer[1];
+			if (strncmp(ptr, "Offsets", 7) != 0)
+				break;
+
+			ptr = remcomOutBuffer;
+			sprintf(ptr, "Text=%8.8x;Data=%8.8x;Bss=%8.8x",
+				&_start, &sdata, &__bss_start);
+			break;
+		}
+#endif
+		case 'd':
+			/* toggle debug flag */
+			kdebug ^= 1;
+			break;
+
+		case 'g':	/* return the value of the CPU registers.
+				 * some of them are non-PowerPC names :(
+				 * they are stored in gdb like:
+				 * struct {
+				 *     u32 gpr[32];
+				 *     f64 fpr[32];
+				 *     u32 pc, ps, cnd, lr; (ps=msr)
+				 *     u32 cnt, xer, mq;
+				 * }
+				 */
+		{
+			int i;
+			ptr = remcomOutBuffer;
+			/* General Purpose Regs */
+			ptr = mem2hex((char *)regs, ptr, 32 * 4);
+			/* Floating Point Regs - FIXME */
+			/*ptr = mem2hex((char *), ptr, 32 * 8);*/
+			for(i=0; i<(32*8*2); i++) { /* 2chars/byte */
+				ptr[i] = '0';
+			}
+			ptr += 32*8*2;
+			/* pc, msr, cr, lr, ctr, xer, (mq is unused) */
+			ptr = mem2hex((char *)&regs->nip, ptr, 4);
+			ptr = mem2hex((char *)&regs->msr, ptr, 4);
+			ptr = mem2hex((char *)&regs->ccr, ptr, 4);
+			ptr = mem2hex((char *)&regs->link, ptr, 4);
+			ptr = mem2hex((char *)&regs->ctr, ptr, 4);
+			ptr = mem2hex((char *)&regs->xer, ptr, 4);
+		}
+			break;
+
+		case 'G':   /* set the value of the CPU registers */
+		{
+			ptr = &remcomInBuffer[1];
+
+			/*
+			 * If the stack pointer has moved, you should pray.
+			 * (cause only god can help you).
+			 */
+
+			/* General Purpose Regs */
+			hex2mem(ptr, (char *)regs, 32 * 4);
+
+			/* Floating Point Regs - FIXME?? */
+			/*ptr = hex2mem(ptr, ??, 32 * 8);*/
+			ptr += 32*8*2;
+
+			/* pc, msr, cr, lr, ctr, xer, (mq is unused) */
+			ptr = hex2mem(ptr, (char *)&regs->nip, 4);
+			ptr = hex2mem(ptr, (char *)&regs->msr, 4);
+			ptr = hex2mem(ptr, (char *)&regs->ccr, 4);
+			ptr = hex2mem(ptr, (char *)&regs->link, 4);
+			ptr = hex2mem(ptr, (char *)&regs->ctr, 4);
+			ptr = hex2mem(ptr, (char *)&regs->xer, 4);
+
+			strcpy(remcomOutBuffer,"OK");
+		}
+			break;
+		case 'H':
+			/* don't do anything, yet, just acknowledge */
+			hexToInt(&ptr, &addr);
+			strcpy(remcomOutBuffer,"OK");
+			break;
+
+		case 'm':	/* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+				/* Try to read %x,%x.  */
+
+			ptr = &remcomInBuffer[1];
+
+			if (hexToInt(&ptr, &addr)
+			    && *ptr++ == ','
+			    && hexToInt(&ptr, &length))	{
+				if (mem2hex((char *)addr, remcomOutBuffer,length))
+					break;
+				strcpy (remcomOutBuffer, "E03");
+			} else {
+				strcpy(remcomOutBuffer,"E01");
+			}
+			break;
+
+		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+			/* Try to read '%x,%x:'.  */
+
+			ptr = &remcomInBuffer[1];
+
+			if (hexToInt(&ptr, &addr)
+			    && *ptr++ == ','
+			    && hexToInt(&ptr, &length)
+			    && *ptr++ == ':') {
+				if (hex2mem(ptr, (char *)addr, length)) {
+					strcpy(remcomOutBuffer, "OK");
+				} else {
+					strcpy(remcomOutBuffer, "E03");
+				}
+				flush_icache_range(addr, addr+length);
+			} else {
+				strcpy(remcomOutBuffer, "E02");
+			}
+			break;
+
+
+		case 'k':    /* kill the program, actually just continue */
+		case 'c':    /* cAA..AA  Continue; address AA..AA optional */
+			/* try to read optional parameter, pc unchanged if no parm */
+
+			ptr = &remcomInBuffer[1];
+			if (hexToInt(&ptr, &addr)) {
+				regs->nip = addr;
+			}
+
+/* Need to flush the instruction cache here, as we may have deposited a
+ * breakpoint, and the icache probably has no way of knowing that a data ref to
+ * some location may have changed something that is in the instruction cache.
+ */
+			kgdb_flush_cache_all();
+			set_msr(msr);
+			kgdb_interruptible(1);
+			unlock_kernel();
+			kgdb_active = 0;
+			return;
+
+		case 's':
+			kgdb_flush_cache_all();
+			regs->msr |= MSR_SE;
+#if 0
+			set_msr(msr | MSR_SE);
+#endif
+			unlock_kernel();
+			kgdb_active = 0;
+			return;
+
+		case 'r':		/* Reset (if user process..exit ???)*/
+			panic("kgdb reset.");
+			break;
+		}			/* switch */
+		if (remcomOutBuffer[0] && kdebug) {
+			printk("remcomInBuffer: %s\n", remcomInBuffer);
+			printk("remcomOutBuffer: %s\n", remcomOutBuffer);
+		}
+		/* reply to the request */
+		putpacket(remcomOutBuffer);
+	} /* while(1) */
+}
+
+/* This function will generate a breakpoint exception.  It is used at the
+   beginning of a program to sync up with a debugger and can be used
+   otherwise as a quick means to stop program execution and "break" into
+   the debugger. */
+
+void
+breakpoint(void)
+{
+	if (!initialized) {
+		printk("breakpoint() called b4 kgdb init\n");
+		return;
+	}
+
+	asm("	.globl breakinst
+	     breakinst: .long 0x7d821008
+            ");
+}
+
+/* Output string in GDB O-packet format if GDB has connected. If nothing
+   output, returns 0 (caller must then handle output). */
+int
+kgdb_output_string (const char* s, unsigned int count)
+{
+	char buffer[512];
+
+        if (!kgdb_started)
+            return 0;
+
+	count = (count <= (sizeof(buffer) / 2 - 2)) 
+		? count : (sizeof(buffer) / 2 - 2);
+
+	buffer[0] = 'O';
+	mem2hex (s, &buffer[1], count);
+	putpacket(buffer);
+
+        return 1;
+ }