patch-2.4.19 linux-2.4.19/drivers/mtd/maps/Config.in

• Lines: 83
• Date: Fri Aug 2 17:39:44 2002
• Orig file: linux-2.4.18/drivers/mtd/maps/Config.in
• Orig date: Thu Oct 4 15:13:18 2001

diff -urN linux-2.4.18/drivers/mtd/maps/Config.in linux-2.4.19/drivers/mtd/maps/Config.in
@@ -1,12 +1,12 @@
 # drivers/mtd/maps/Config.in
 
-# $Id: Config.in,v 1.16 2001/09/19 18:28:37 dwmw2 Exp $
+# $Id: Config.in,v 1.28 2002/03/08 16:34:35 rkaiser Exp $
 
 mainmenu_option next_comment
 
 comment 'Mapping drivers for chip access'
 
-dep_tristate '  CFI Flash device in physical memory map' CONFIG_MTD_PHYSMAP $CONFIG_MTD_CFI
+dep_tristate '  CFI Flash device in physical memory map' CONFIG_MTD_PHYSMAP $CONFIG_MTD_GEN_PROBE
 if [ "$CONFIG_MTD_PHYSMAP" = "y" -o "$CONFIG_MTD_PHYSMAP" = "m" ]; then
    hex '    Physical start address of flash mapping' CONFIG_MTD_PHYSMAP_START 0x8000000
    hex '    Physical length of flash mapping' CONFIG_MTD_PHYSMAP_LEN 0x4000000
@@ -23,20 +23,33 @@
    dep_tristate '  CFI Flash device mapped on AMD NetSc520'  CONFIG_MTD_NETSC520 $CONFIG_MTD_CFI $CONFIG_MTD_PARTITIONS
    dep_tristate '  CFI Flash device mapped on Arcom SBC-GXx boards' CONFIG_MTD_SBC_GXX $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_PARTITIONS
    dep_tristate '  CFI Flash device mapped on Arcom ELAN-104NC' CONFIG_MTD_ELAN_104NC $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_PARTITIONS
+   dep_tristate '  CFI Flash device mapped on DIL/Net PC' CONFIG_MTD_DILNETPC $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_PARTITIONS $CONFIG_MTD_CONCAT
+   if [ "$CONFIG_MTD_DILNETPC" = "y" -o "$CONFIG_MTD_DILNETPC" = "m" ]; then
+     hex '    Size of boot partition' CONFIG_MTD_DILNETPC_BOOTSIZE 0x80000
+   fi
    dep_tristate '  JEDEC Flash device mapped on Mixcom piggyback card' CONFIG_MTD_MIXMEM $CONFIG_MTD_JEDEC
    dep_tristate '  JEDEC Flash device mapped on Octagon 5066 SBC' CONFIG_MTD_OCTAGON $CONFIG_MTD_JEDEC
    dep_tristate '  JEDEC Flash device mapped on Tempustech VMAX SBC301' CONFIG_MTD_VMAX $CONFIG_MTD_JEDEC
-   dep_tristate '  BIOS flash chip on Intel L440GX boards' CONFIG_MTD_L440GX $CONFIG_I386 $CONFIG_MTD_JEDEC
+   dep_tristate '  BIOS flash chip on Intel L440GX boards' CONFIG_MTD_L440GX $CONFIG_MTD_JEDECPROBE
+   dep_tristate ' ROM connected to AMD766 southbridge' CONFIG_MTD_AMD766ROM $CONFIG_MTD_GEN_PROBE   
+   dep_tristate ' ROM connected to Intel Hub Controller 2' CONFIG_MTD_ICH2ROM $CONFIG_MTD_JEDECPROBE
 fi
 
 if [ "$CONFIG_PPC" = "y" ]; then
-   dep_tristate '  CFI Flash device mapped on TQM8XXL' CONFIG_MTD_TQM8XXL $CONFIG_MTD_CFI $CONFIG_TQM8xxL $CONFIG_PPC
-   dep_tristate '  CFI Flash device mapped on RPX Lite or CLLF' CONFIG_MTD_RPXLITE $CONFIG_MTD_CFI $CONFIG_PPC
-   dep_tristate '  CFI Flash device mapped on D-Box2' CONFIG_MTD_DBOX2 $CONFIG_MTD_CFI_INTELSTD $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_CFI_AMDSTD
+   dep_tristate '  CFI Flash device mapped on TQM8XXL' CONFIG_MTD_TQM8XXL $CONFIG_MTD_CFI $CONFIG_TQM8xxL
+   dep_tristate '  CFI Flash device mapped on RPX Lite or CLLF' CONFIG_MTD_RPXLITE $CONFIG_MTD_CFI
+   dep_tristate '  System flash on MBX860 board' CONFIG_MTD_MBX860 $CONFIG_MTD_CFI
+   dep_tristate '  CFI Flash device mapped on D-Box2' CONFIG_MTD_DBOX2 $CONFIG_MTD_CFI
    dep_tristate '  CFI Flash device mapping on FlagaDM' CONFIG_MTD_CFI_FLAGADM $CONFIG_MTD_CFI
 fi
 
 if [ "$CONFIG_MIPS" = "y" ]; then
+   dep_tristate '  Pb1000 boot flash device' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
+   dep_tristate '  Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
+   if [ "$CONFIG_MTD_PB1500" = "y" -o "$CONFIG_MTD_PB1500" = "m" ]; then
+      bool '  Pb1500 boot flash device' CONFIG_MTD_PB1500_BOOT 
+      bool '  Pb1500 user flash device (2nd 32MB bank)' CONFIG_MTD_PB1500_USER
+   fi
    dep_tristate '  Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board' CONFIG_MTD_CSTM_MIPS_IXX $CONFIG_MTD_CFI $CONFIG_MTD_JEDEC $CONFIG_MTD_PARTITIONS 
    if [ "$CONFIG_MTD_CSTM_MIPS_IXX" = "y" -o "$CONFIG_MTD_CSTM_MIPS_IXX" = "m" ]; then
       hex '    Physical start address of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_START 0x8000000
@@ -46,8 +59,12 @@
    dep_tristate '  Momenco Ocelot boot flash device' CONFIG_MTD_OCELOT $CONFIG_MOMENCO_OCELOT
 fi
 
-if [ "$CONFIG_SH" = "y" ]; then
-   dep_tristate '  CFI Flash device mapped on Hitachi SolutionEngine' CONFIG_MTD_SOLUTIONENGINE $CONFIG_MTD_CFI $CONFIG_SH $CONFIG_MTD_REDBOOT_PARTS
+if [ "$CONFIG_SUPERH" = "y" ]; then
+   dep_tristate '  CFI Flash device mapped on Hitachi SolutionEngine' \
+      CONFIG_MTD_SOLUTIONENGINE $CONFIG_MTD_PARTITIONS $CONFIG_MTD_CFI
+   if [ "$CONFIG_MTD_SOLUTIONENGINE" != "n" ]; then
+      hex '  Default reserved Flash size'  CONFIG_MTD_SUPERH_RESERVE 0x00010000
+   fi
 fi
 
 if [ "$CONFIG_ARM" = "y" ]; then
@@ -57,6 +74,14 @@
    dep_tristate '  CFI Flash device mapped on StrongARM SA11x0' CONFIG_MTD_SA1100 $CONFIG_MTD_CFI $CONFIG_ARCH_SA1100 $CONFIG_MTD_PARTITIONS
    dep_tristate '  CFI Flash device mapped on DC21285 Footbridge' CONFIG_MTD_DC21285 $CONFIG_MTD_CFI $CONFIG_ARCH_FOOTBRIDGE $CONFIG_MTD_PARTITIONS
    dep_tristate '  CFI Flash device mapped on the XScale IQ80310 board' CONFIG_MTD_IQ80310 $CONFIG_MTD_CFI $CONFIG_ARCH_IQ80310
+   dep_tristate '  CFI Flash device mapped on Epxa10db' CONFIG_MTD_EPXA10DB $CONFIG_MTD_CFI  $CONFIG_MTD_PARTITIONS $CONFIG_ARCH_CAMELOT
+   dep_tristate '  NV-RAM mapping AUTCPU12 board' CONFIG_MTD_AUTCPU12 $CONFIG_ARCH_AUTCPU12
 fi
+if [ "$CONFIG_ALPHA" = "y" ]; then
+   dep_tristate '  Flash chip mapping on TSUNAMI' CONFIG_MTD_TSUNAMI $CONFIG_MTD_GENPROBE
+fi
+
+# This needs CFI or JEDEC, depending on the cards found.
+dep_tristate '  PCI MTD driver' CONFIG_MTD_PCI $CONFIG_MTD $CONFIG_PCI
 
 endmenu