patch-1.3.78 linux/drivers/sound/configure.c

Next file: linux/drivers/sound/dev_table.h
Previous file: linux/drivers/sound/audio.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v1.3.77/linux/drivers/sound/configure.c linux/drivers/sound/configure.c
@@ -1,13 +1,36 @@
 /*
- *	 PnP soundcard support is not included in this version.
+ *     PnP soundcard support is not included in this version.
  *
- *	 AEDSP16 will not work without significant changes.
+ *       AEDSP16 will not work without significant changes.
  */
 #define DISABLED_OPTIONS 	(B(OPT_SPNP)|B(OPT_AEDSP16)|B(OPT_UNUSED1)|B(OPT_UNUSED2))
 /*
  * sound/configure.c  - Configuration program for the Linux Sound Driver
  */
-#define COPYING2
+/*
+ * Copyright by Hannu Savolainen 1993-1996
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer. 2.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
 
 #include <stdio.h>
 #include <unistd.h>
@@ -56,7 +79,7 @@
 #define ANY_DEVS (B(OPT_AUDIO)|B(OPT_MIDI)|B(OPT_GUS)| \
 		  B(OPT_MPU401)|B(OPT_PSS)|B(OPT_GUS16)|B(OPT_GUSMAX)| \
 		  B(OPT_MSS)|B(OPT_SSCAPE)|B(OPT_UART6850)|B(OPT_TRIX)| \
-		  B(OPT_MAD16)|B(OPT_CS4232)|B(OPT_MAUI))
+		  B(OPT_MAD16)|B(OPT_CS4232)|B(OPT_MAUI)|B(OPT_ADLIB))
 #define AUDIO_CARDS (B (OPT_PSS) | B (OPT_SB) | B (OPT_PAS) | B (OPT_GUS) | \
 		B (OPT_MSS) | B (OPT_GUS16) | B (OPT_GUSMAX) | B (OPT_TRIX) | \
 		B (OPT_SSCAPE)| B(OPT_MAD16) | B(OPT_CS4232))
@@ -221,7 +244,7 @@
   "them. In addition the MAD16 chip is used in some cards made by known\n"
   "manufacturers such as Turtle Beach (Tropez), Reveal (some models) and\n"
   "Diamond (latest ones).\n",
-  
+
   "Enable this if you have a card based on the Crystal CS4232 chip set.\n",
 
   "Enable this option if you have a Turtle Beach Wave Front, Maui,\n"
@@ -246,7 +269,7 @@
   "This enables the dev/midixx devices and access to any MIDI ports\n"
   "using /dev/sequencer and /dev/music. This option also affects any\n"
   "MPU401 and/or General MIDI compatible devices.\n",
-  
+
   "This should not be asked",
 
   "This enables the Yamaha FM synthesizer chip used on many sound\n"
@@ -297,21 +320,6 @@
 int
 can_select_option (int nr)
 {
-#if 0
-  switch (nr)
-    {
-    case OPT_LAST_MUTUAL + 1:
-      fprintf (stderr, "\nThe following cards should work with any other cards.\n"
-	       "CAUTION! Don't enable MPU-401 if you don't have it.\n");
-      break;
-
-    case OPT_HIGHLEVEL:
-      fprintf (stderr, "\nSelect one or more of the following options\n");
-      break;
-
-
-    }
-#endif
 
   if (hw_table[nr].conditions)
     if (!(hw_table[nr].conditions & selected_options))
@@ -333,12 +341,12 @@
   char            answ[512];
   int             len;
 
-  response:
-  fprintf(stderr, prompt);
+response:
+  fprintf (stderr, prompt);
   if (def_answ)
-    fprintf(stderr, " [Y/n/?] ");
+    fprintf (stderr, " [Y/n/?] ");
   else
-    fprintf(stderr, " [N/y/?] ");
+    fprintf (stderr, " [N/y/?] ");
 
   if ((len = read (0, answ, sizeof (answ))) < 1)
     {
@@ -354,12 +362,13 @@
 				 */
     return def_answ;
 
-  if (answ[0] == '?') {		/* display help message */
-    fprintf(stderr, "\n");
-    fprintf(stderr, help);
-    fprintf(stderr, "\n");
-    goto response;
-  }
+  if (answ[0] == '?')
+    {				/* display help message */
+      fprintf (stderr, "\n");
+      fprintf (stderr, help);
+      fprintf (stderr, "\n");
+      goto response;
+    }
 
   answ[len - 1] = 0;
 
@@ -420,7 +429,7 @@
       for (i = 0; i < OPT_LAST; i++)
 	if (mask == B (i))
 	  {
-	    unsigned int             j;
+	    unsigned int    j;
 
 	    for (j = 0; j < strlen (choices); j++)
 	      if (choices[j] == '\'')
@@ -441,7 +450,7 @@
 	return;
 
       fprintf (stderr, "\n%s\n", question);
-      if (strcmp(choices, ""))
+      if (strcmp (choices, ""))
 	fprintf (stderr, "Possible values are: %s\n", choices);
 
       if (format == FMT_INT)
@@ -579,18 +588,18 @@
 	    continue;
 
 	  if (strcmp (tmp, "JAZZ_DMA16") == 0)	/* Rename it (hack) */
-	  {
-		printf("#define SB_DMA2 %s\n",
-			&buf[18]);
-		continue;
-	  }
+	    {
+	      printf ("#define SB_DMA2 %s\n",
+		      &buf[18]);
+	      continue;
+	    }
 
 	  if (strcmp (tmp, "SB16_DMA") == 0)	/* Rename it (hack) */
-	  {
-		printf("#define SB_DMA2 %s\n",
-			&buf[16]);
-		continue;
-	  }
+	    {
+	      printf ("#define SB_DMA2 %s\n",
+		      &buf[16]);
+	      continue;
+	    }
 
 	  tmp[8] = 0;		/* Truncate the string */
 	  if (strcmp (tmp, "EXCLUDE_") == 0)
@@ -678,14 +687,11 @@
   printf ("#define SELECTED_SOUND_OPTIONS\t0x%08x\n", selected_options);
   fprintf (stderr, "Old configuration copied.\n");
 
-#ifdef linux
   build_defines ();
-#endif
   old_config_used = 1;
   return 1;
 }
 
-#ifdef linux
 void
 build_defines (void)
 {
@@ -703,10 +709,6 @@
     if (!hw_table[i].alias)
       if (selected_options & B (i))
 	fprintf (optf, "CONFIG_%s=y\n", hw_table[i].macro);
-#if 0
-      else
-	fprintf (optf, "CONFIG_%s=n\n", hw_table[i].macro);
-#endif
 
 
   fprintf (optf, "\n");
@@ -717,22 +719,16 @@
     {
       if (selected_options & extra_options[i].mask)
 	fprintf (optf, "CONFIG_%s=y\n", extra_options[i].name);
-#if 0
-      else
-	fprintf (optf, "CONFIG_%s=n\n", extra_options[i].name);
-#endif
       i++;
     }
 
   fprintf (optf, "\n");
   fclose (optf);
 }
-#endif
 
 void
 ask_parameters (void)
 {
-#ifdef linux
   int             num;
 
   build_defines ();
@@ -765,7 +761,7 @@
 		  "0, 1 or 3");
 
   ask_int_choice (B (OPT_SB), "SB_DMA2",
-		  "SoundBlaster 16 bit DMA (_REQUIRED_for SB16, Jazz16, SMW)",
+		"SoundBlaster 16 bit DMA (_REQUIRED_for SB16, Jazz16, SMW)",
 		  FMT_INT,
 		  5,
 		  "5, 6 or 7");
@@ -797,21 +793,21 @@
   if (selected_options & B (OPT_PAS))
     {
       if (think_positively ("Enable Joystick port on ProAudioSpectrum", 0,
-      "Enable this option if you want to use the joystick port provided\n"
-      "on the PAS sound card.\n"))
-         printf ("#define PAS_JOYSTICK_ENABLE\n");
+	"Enable this option if you want to use the joystick port provided\n"
+			    "on the PAS sound card.\n"))
+	printf ("#define PAS_JOYSTICK_ENABLE\n");
 
       if (think_positively ("Enable PAS16 bus clock option", 0,
-      "The PAS16 can be noisy with some motherboards. There is a command\n"
-      "line switch (:T?) in the DOS driver for PAS16 which solves this.\n"
+       "The PAS16 can be noisy with some motherboards. There is a command\n"
+	"line switch (:T?) in the DOS driver for PAS16 which solves this.\n"
       "Don't enable this feature unless you have problems and have to use\n"
-      "this switch with DOS\n"))
+			    "this switch with DOS\n"))
 	printf ("#define BROKEN_BUS_CLOCK\n");
 
       if (think_positively ("Disable SB mode of PAS16", 0,
-      "You should disable SB emulation of PAS16 if you want to use\n"
-      "Another SB compatible card in the same system\n"))
-         printf ("#define DISABLE_SB_EMULATION\n");
+	     "You should disable SB emulation of PAS16 if you want to use\n"
+			 "Another SB compatible card in the same system\n"))
+	printf ("#define DISABLE_SB_EMULATION\n");
     }
 
   ask_int_choice (B (OPT_GUS), "GUS_BASE",
@@ -989,10 +985,10 @@
       int             reveal_spea;
 
       reveal_spea = think_positively (
-        "Is your SoundScape card made/marketed by Reveal or Spea",
-	0,
-	"Enable if you have a SoundScape card with the Reveal or\n"
-	"Spea name on it.\n");
+		  "Is your SoundScape card made/marketed by Reveal or Spea",
+				       0,
+		 "Enable if you have a SoundScape card with the Reveal or\n"
+				       "Spea name on it.\n");
       if (reveal_spea)
 	printf ("#define REVEAL_SPEA\n");
 
@@ -1123,7 +1119,6 @@
 		  FMT_INT,
 		  9,
 		  "5, 7, 9 or 10");
-#endif
   ask_int_choice (B (OPT_AUDIO), "DSP_BUFFSIZE",
 		  "Audio DMA buffer size",
 		  FMT_INT,
@@ -1152,9 +1147,7 @@
   selected_options = 0;
   ask_parameters ();
 
-#if 1
   printf ("#\n$MAKE -C drivers/sound kernelconfig || exit 1\n");
-#endif
 }
 
 void
@@ -1258,11 +1251,12 @@
 
   if (access (oldconf, R_OK) == 0)
     {
-      char str[255];
-      sprintf(str, "Old configuration exists in `%s'. Use it", oldconf);
+      char            str[255];
+
+      sprintf (str, "Old configuration exists in `%s'. Use it", oldconf);
       if (think_positively (str, 1,
-"Enable this option to load the previously saved configuration file\n"
-"for all of the sound driver parameters.\n"))
+      "Enable this option to load the previously saved configuration file\n"
+			    "for all of the sound driver parameters.\n"))
 	if (use_old_config (oldconf))
 	  exit (0);
     }
@@ -1308,28 +1302,28 @@
   if (selected_options & B (OPT_SB))
     {
       if (think_positively (
-        "Support for the SG NX Pro mixer", 0,
-        "Enable this if you want to support the additional mixer functions\n"
-        "provided on Sound Galaxy NX Pro sound cards.\n"))
+			     "Support for the SG NX Pro mixer", 0,
+       "Enable this if you want to support the additional mixer functions\n"
+			  "provided on Sound Galaxy NX Pro sound cards.\n"))
 	printf ("#define __SGNXPRO__\n");
     }
 
   if (selected_options & B (OPT_SB))
     {
       if (think_positively ("Support for the MV Jazz16 (ProSonic etc.)", 0,
-      "Enable this if you have an MV Jazz16 or ProSonic sound card.\n"))
+	  "Enable this if you have an MV Jazz16 or ProSonic sound card.\n"))
 	{
 	  if (think_positively ("Do you have SoundMan Wave", 0,
- "Enable this option of you have the Logitech SoundMan Wave sound card.\n"))
+				"Enable this option of you have the Logitech SoundMan Wave sound card.\n"))
 	    {
 	      printf ("#define SM_WAVE\n");
 
 	    midi0001_again:
 	      if (think_positively (
-"Do you have access to the MIDI0001.BIN file", 1,
-"The Logitech SoundMan Wave has a microcontroller which must be\n"
-"initialized before MIDI emulation works. This is possible only if the\n"
-"microcode file is compiled into the driver.\n"))
+			   "Do you have access to the MIDI0001.BIN file", 1,
+				     "The Logitech SoundMan Wave has a microcontroller which must be\n"
+				     "initialized before MIDI emulation works. This is possible only if the\n"
+			   "microcode file is compiled into the driver.\n"))
 		{
 		  char            path[512];
 
@@ -1343,8 +1337,8 @@
 		      fprintf (stderr, "Couldn't open file %s\n",
 			       path);
 		      if (think_positively ("Try again with correct path", 1,
-"The specified file could not be opened. Enter the correct path to the\n"
-"file.\n"))
+					    "The specified file could not be opened. Enter the correct path to the\n"
+					    "file.\n"))
 			goto midi0001_again;
 		    }
 		  else
@@ -1360,13 +1354,13 @@
   if (selected_options & B (OPT_SB))
     {
       if (think_positively ("Do you have a Logitech SoundMan Games", 0,
-"The Logitech SoundMan Games supports 44 kHz in stereo while the\n"
-"standard SB Pro supports just 22 kHz stereo. You have the option of\n"
-"enabling SM Games mode.  However, enable it only if you are sure that\n"
-"your card is an SM Games. Enabling this feature with a plain old SB\n"
-"Pro will cause troubles with stereo mode.\n\n"
-"DANGER! Read the above once again before answering 'y'\n"
-"Answer 'n' if you are unsure what to do!\n"))
+	 "The Logitech SoundMan Games supports 44 kHz in stereo while the\n"
+      "standard SB Pro supports just 22 kHz stereo. You have the option of\n"
+			    "enabling SM Games mode.  However, enable it only if you are sure that\n"
+      "your card is an SM Games. Enabling this feature with a plain old SB\n"
+			    "Pro will cause troubles with stereo mode.\n\n"
+		  "DANGER! Read the above once again before answering 'y'\n"
+			    "Answer 'n' if you are unsure what to do!\n"))
 	printf ("#define SM_GAMES\n");
     }
 
@@ -1378,10 +1372,10 @@
 	{
 
 	  if (think_positively (
-"Do you want support for the Audio Excel SoundBlaster Pro mode",
-1,
-"Enable this option if you want the Audio Excel sound card to operate\n"
-"in SoundBlaster Pro mode.\n"))
+	    "Do you want support for the Audio Excel SoundBlaster Pro mode",
+				 1,
+				 "Enable this option if you want the Audio Excel sound card to operate\n"
+				 "in SoundBlaster Pro mode.\n"))
 	    {
 	      printf ("#define AEDSP16_SBPRO\n");
 	      sel1 = 1;
@@ -1390,12 +1384,12 @@
 
       if ((selected_options & B (OPT_MSS)) && (sel1 == 0))
 	{
-	  
+
 	  if (think_positively (
-"Do you want support for the Audio Excel Microsoft Sound System mode",
-1,
-"Enable this option if you want the Audio Excel sound card to operate\n"
-"in Microsoft Sound System mode.\n"))
+				 "Do you want support for the Audio Excel Microsoft Sound System mode",
+				 1,
+				 "Enable this option if you want the Audio Excel sound card to operate\n"
+				 "in Microsoft Sound System mode.\n"))
 	    {
 	      printf ("#define AEDSP16_MSS\n");
 	      sel1 = 1;
@@ -1416,8 +1410,8 @@
     {
     genld_again:
       if (think_positively ("Do you wish to include an LD file", 1,
-     "If you want to emulate the SoundBlaster card and you have a DSPxxx.LD\n"
-     "file then you must include the LD in the kernel.\n"))
+			    "If you want to emulate the SoundBlaster card and you have a DSPxxx.LD\n"
+		      "file then you must include the LD in the kernel.\n"))
 	{
 	  char            path[512];
 
@@ -1428,9 +1422,9 @@
 
 	  if (!bin2hex (path, "synth-ld.h", "pss_synth"))
 	    {
-              fprintf (stderr, "couldn't open `%s' as the LD file\n", path);
+	      fprintf (stderr, "couldn't open `%s' as the LD file\n", path);
 	      if (think_positively ("try again with correct path", 1,
-                "The given LD file could not opened.\n"))
+				    "The given LD file could not opened.\n"))
 		goto genld_again;
 	    }
 	  else
@@ -1455,12 +1449,12 @@
     hex2hex_again:
 
       if (think_positively ("Do you want to include TRXPRO.HEX in your kernel",
-      1,
-"The MediaTriX AudioTrix Pro has an onboard microcontroller which\n"
-"needs to be initialized by downloading the code from the file TRXPRO.HEX\n"
-"in the DOS driver directory. If you don't have the TRXPRO.HEX file handy\n"
-"you may skip this step. However, the SB and MPU-401 modes of AudioTriX\n"
-"Pro will not work without this file!\n"))
+			    1,
+	"The MediaTriX AudioTrix Pro has an onboard microcontroller which\n"
+			    "needs to be initialized by downloading the code from the file TRXPRO.HEX\n"
+			    "in the DOS driver directory. If you don't have the TRXPRO.HEX file handy\n"
+			    "you may skip this step. However, the SB and MPU-401 modes of AudioTriX\n"
+			    "Pro will not work without this file!\n"))
 	{
 	  char            path[512];
 
@@ -1479,7 +1473,7 @@
   if (!(selected_options & ANY_DEVS))
     {
       printf ("invalid_configuration__run_make_config_again\n");
-      fprintf (stderr,"\n*** This combination is useless. Sound driver disabled!!! ***\n*** You need to enable support for at least one device    ***\n\n");
+      fprintf (stderr, "\n*** This combination is useless. Sound driver disabled!!! ***\n*** You need to enable support for at least one device    ***\n\n");
       exit (0);
     }
 
@@ -1516,12 +1510,13 @@
 
   if (!old_config_used)
     {
-      char str[255];
-      sprintf(str, "Save copy of this configuration to `%s'", oldconf);
-      if (think_positively (str, 1, 
-"If you enable this option then the sound driver configuration is\n"
-"saved to a file. If you later need to recompile the kernel you have\n"
-"the option of using the saved configuration.\n"))
+      char            str[255];
+
+      sprintf (str, "Save copy of this configuration to `%s'", oldconf);
+      if (think_positively (str, 1,
+	"If you enable this option then the sound driver configuration is\n"
+      "saved to a file. If you later need to recompile the kernel you have\n"
+			  "the option of using the saved configuration.\n"))
 	{
 	  char            cmd[200];
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov with Sam's (original) version
of this