patch-1.3.9 linux/drivers/sound/pas2_mixer.c
Next file: linux/drivers/sound/pas2_pcm.c
Previous file: linux/drivers/sound/pas2_midi.c
Back to the patch index
Back to the overall index
- Lines: 280
- Date:
Mon Jul 10 01:45:14 1995
- Orig file:
v1.3.8/linux/drivers/sound/pas2_mixer.c
- Orig date:
Fri Aug 19 08:54:09 1994
diff -u --recursive --new-file v1.3.8/linux/drivers/sound/pas2_mixer.c linux/drivers/sound/pas2_mixer.c
@@ -35,18 +35,12 @@
#include "pas.h"
-#define TRACE(what) /*
- * * * (what) */
+#define TRACE(what) /* (what) */
extern int translat_code;
+extern char pas_model;
-static int rec_devices = (SOUND_MASK_MIC); /*
-
-
- * * * * Default *
- * recording * source
- *
- * * */
+static int rec_devices = (SOUND_MASK_MIC); /* Default recording source */
static int mode_control = 0;
#define POSSIBLE_RECORDING_DEVICES (SOUND_MASK_SYNTH | SOUND_MASK_SPEAKER | SOUND_MASK_LINE | SOUND_MASK_MIC | \
@@ -59,60 +53,47 @@
static unsigned short levels[SOUND_MIXER_NRDEVICES] =
{
- 0x3232, /*
- * Master Volume
- */
- 0x3232, /*
- * Bass
- */
- 0x3232, /*
- * Treble
- */
- 0x5050, /*
- * FM
- */
- 0x4b4b, /*
- * PCM
- */
- 0x3232, /*
- * PC Speaker
- */
- 0x4b4b, /*
- * Ext Line
- */
- 0x4b4b, /*
- * Mic
- */
- 0x4b4b, /*
- * CD
- */
- 0x6464, /*
- * Recording monitor
- */
- 0x4b4b, /*
- * SB PCM
- */
- 0x6464}; /*
+ 0x3232, /* Master Volume */
+ 0x3232, /* Bass */
+ 0x3232, /* Treble */
+ 0x5050, /* FM */
+ 0x4b4b, /* PCM */
+ 0x3232, /* PC Speaker */
+ 0x4b4b, /* Ext Line */
+ 0x4b4b, /* Mic */
+ 0x4b4b, /* CD */
+ 0x6464, /* Recording monitor */
+ 0x4b4b, /* SB PCM */
+ 0x6464 /* Recording level */
+};
+void
+mix_write (unsigned char data, int ioaddr)
+{
+ /*
+ * The Revision D cards have a problem with their MVA508 interface. The
+ * kludge-o-rama fix is to make a 16-bit quantity with identical LSB and
+ * MSBs out of the output byte and to do a 16-bit out to the mixer port -
+ * 1. We need to do this because it isn't timing problem but chip access
+ * sequence problem.
+ */
- * * * * Recording level */
+ if (pas_model == PAS_16D)
+ {
+ OUTW (data | (data << 8), (ioaddr ^ translat_code) - 1);
+ OUTB (0x80, 0);
+ }
+ else
+ pas_write (data, ioaddr);
+}
static int
mixer_output (int right_vol, int left_vol, int div, int bits,
- int mixer /*
- * Input or output mixer
- */ )
+ int mixer) /* Input or output mixer */
{
int left = left_vol * div / 100;
int right = right_vol * div / 100;
- /*
- * The Revision D cards have a problem with their MVA508 interface. The
- * kludge-o-rama fix is to make a 16-bit quantity with identical LSB and
- * MSBs out of the output byte and to do a 16-bit out to the mixer port -
- * 1. We don't need to do this because the call to pas_write more than
- * compensates for the timing problems.
- */
if (bits & P_M_MV508_MIXER)
{ /*
@@ -126,16 +107,16 @@
{ /*
* Bass and treble are mono devices
*/
- pas_write (P_M_MV508_ADDRESS | bits, PARALLEL_MIXER);
- pas_write (left, PARALLEL_MIXER);
+ mix_write (P_M_MV508_ADDRESS | bits, PARALLEL_MIXER);
+ mix_write (left, PARALLEL_MIXER);
right_vol = left_vol;
}
else
{
- pas_write (P_M_MV508_ADDRESS | P_M_MV508_LEFT | bits, PARALLEL_MIXER);
- pas_write (left, PARALLEL_MIXER);
- pas_write (P_M_MV508_ADDRESS | P_M_MV508_RIGHT | bits, PARALLEL_MIXER);
- pas_write (right, PARALLEL_MIXER);
+ mix_write (P_M_MV508_ADDRESS | P_M_MV508_LEFT | bits, PARALLEL_MIXER);
+ mix_write (left, PARALLEL_MIXER);
+ mix_write (P_M_MV508_ADDRESS | P_M_MV508_RIGHT | bits, PARALLEL_MIXER);
+ mix_write (right, PARALLEL_MIXER);
}
return (left_vol | (right_vol << 8));
@@ -144,8 +125,8 @@
void
set_mode (int new_mode)
{
- pas_write (P_M_MV508_ADDRESS | P_M_MV508_MODE, PARALLEL_MIXER);
- pas_write (new_mode, PARALLEL_MIXER);
+ mix_write (P_M_MV508_ADDRESS | P_M_MV508_MODE, PARALLEL_MIXER);
+ mix_write (new_mode, PARALLEL_MIXER);
mode_control = new_mode;
}
@@ -168,9 +149,7 @@
switch (whichDev)
{
- case SOUND_MIXER_VOLUME: /*
- * Master volume (0-63)
- */
+ case SOUND_MIXER_VOLUME: /* Master volume (0-63) */
levels[whichDev] = mixer_output (right, left, 63, P_M_MV508_MASTER_A, 0);
break;
@@ -178,62 +157,39 @@
* Note! Bass and Treble are mono devices. Will use just the left
* channel.
*/
- case SOUND_MIXER_BASS: /*
- * Bass (0-12)
- */
+ case SOUND_MIXER_BASS: /* Bass (0-12) */
levels[whichDev] = mixer_output (right, left, 12, P_M_MV508_BASS, 0);
break;
- case SOUND_MIXER_TREBLE: /*
- * Treble (0-12)
- */
+ case SOUND_MIXER_TREBLE: /* Treble (0-12) */
levels[whichDev] = mixer_output (right, left, 12, P_M_MV508_TREBLE, 0);
break;
- case SOUND_MIXER_SYNTH: /*
- * Internal synthesizer (0-31)
- */
+ case SOUND_MIXER_SYNTH: /* Internal synthesizer (0-31) */
levels[whichDev] = mixer_output (right, left, 31, P_M_MV508_MIXER | P_M_MV508_FM, mixer);
break;
- case SOUND_MIXER_PCM: /*
- * PAS PCM (0-31)
- */
+ case SOUND_MIXER_PCM: /* PAS PCM (0-31) */
levels[whichDev] = mixer_output (right, left, 31, P_M_MV508_MIXER | P_M_MV508_PCM, mixer);
break;
- case SOUND_MIXER_ALTPCM: /*
- * SB PCM (0-31)
- */
+ case SOUND_MIXER_ALTPCM: /* SB PCM (0-31) */
levels[whichDev] = mixer_output (right, left, 31, P_M_MV508_MIXER | P_M_MV508_SB, mixer);
break;
- case SOUND_MIXER_SPEAKER: /*
- * PC speaker (0-31)
- */
+ case SOUND_MIXER_SPEAKER: /* PC speaker (0-31) */
levels[whichDev] = mixer_output (right, left, 31, P_M_MV508_MIXER | P_M_MV508_SPEAKER, mixer);
break;
- case SOUND_MIXER_LINE: /*
- * External line (0-31)
- */
+ case SOUND_MIXER_LINE: /* External line (0-31) */
levels[whichDev] = mixer_output (right, left, 31, P_M_MV508_MIXER | P_M_MV508_LINE, mixer);
break;
- case SOUND_MIXER_CD: /*
- * CD (0-31)
- */
+ case SOUND_MIXER_CD: /* CD (0-31) */
levels[whichDev] = mixer_output (right, left, 31, P_M_MV508_MIXER | P_M_MV508_CDROM, mixer);
break;
- case SOUND_MIXER_MIC: /*
- * External microphone (0-31)
- */
+ case SOUND_MIXER_MIC: /* External microphone (0-31) */
levels[whichDev] = mixer_output (right, left, 31, P_M_MV508_MIXER | P_M_MV508_MIC, mixer);
break;
- case SOUND_MIXER_IMIX: /*
- * Recording monitor (0-31) (Only available *
- * on the Output Mixer)
- */
+ case SOUND_MIXER_IMIX: /* Recording monitor (0-31) (Output mixer only) */
levels[whichDev] = mixer_output (right, left, 31, P_M_MV508_MIXER | P_M_MV508_IMIXER,
P_M_MV508_OUTPUTMIX);
break;
- case SOUND_MIXER_RECLEV: /*
- * Recording level (0-15)
- */
+ case SOUND_MIXER_RECLEV: /* Recording level (0-15) */
levels[whichDev] = mixer_output (right, left, 15, P_M_MV508_MASTER_B, 0);
break;
@@ -261,9 +217,7 @@
if (level)
mode_control |= P_M_MV508_LOUDNESS;
set_mode (mode_control);
- return !!level; /*
- * 0 or 1
- */
+ return !!level; /* 0 or 1 */
break;
case SOUND_MIXER_RECSRC:
@@ -313,7 +267,7 @@
return IOCTL_OUT (arg, pas_mixer_set (cmd & 0xff, IOCTL_IN (arg)));
else
{ /*
- * Read parameters
+ * Read parameters
*/
switch (cmd & 0xff)
@@ -336,15 +290,11 @@
break;
case SOUND_MIXER_CAPS:
- return IOCTL_OUT (arg, 0); /*
- * No special capabilities
- */
+ return IOCTL_OUT (arg, 0); /* No special capabilities */
break;
case SOUND_MIXER_MUTE:
- return IOCTL_OUT (arg, 0); /*
- * No mute yet
- */
+ return IOCTL_OUT (arg, 0); /* No mute yet */
break;
case SOUND_MIXER_ENHANCE:
@@ -369,6 +319,7 @@
static struct mixer_operations pas_mixer_operations =
{
+ "Pro Audio Spectrum 16",
pas_mixer_ioctl
};
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov
with Sam's (original) version of this