patch-1.3.9 linux/include/linux/aztcd.h

• Lines: 64
• Date: Mon Jul 10 08:00:56 1995
• Orig file: v1.3.8/linux/include/linux/aztcd.h
• Orig date: Sun Mar 26 11:56:23 1995

diff -u --recursive --new-file v1.3.8/linux/include/linux/aztcd.h linux/include/linux/aztcd.h
@@ -1,4 +1,4 @@
-/* $Id: aztcd.h,v 1.0 1995/03/25 08:27:19 root Exp $
+/* $Id: aztcd.h,v 1.30 1995/07/04 08:28:17 root Exp $
  * Definitions for a AztechCD268 CD-ROM interface
  *	Copyright (C) 1994, 1995  Werner Zimmermann
  *
@@ -22,12 +22,29 @@
  *		October 1994 Email: zimmerma@rz.fht-esslingen.de
  */
 
-/* *** change this to set the I/O port address */
+/* *** change this to set the I/O port address of your CD-ROM drive*/
 #define AZT_BASE_ADDR		0x320
 
-/* Comment this out to prevent tray from locking */
+/* Uncomment this, if your CDROM is connected to a Soundwave32-soundcard
+   and configure AZT_BASE_ADDR and AZT_SW32_BASE_ADDR */
+/*#define AZT_SW32 1
+*/
+
+#ifdef AZT_SW32 
+#define AZT_SW32_BASE_ADDR       0x220  /*I/O port base adress of your soundcard*/
+#endif
+
+/* Set this to 1, if you want your tray to be locked, set to 0 to prevent tray 
+   from locking */
 #define AZT_ALLOW_TRAY_LOCK	1
 
+/*Set this to 1 to allow auto-eject when unmounting a disk, set to 0, if you 
+  don't want the auto-eject feature*/
+#define AZT_AUTO_EJECT          0
+
+/*---------------------------------------------------------------------------*/
+/*------------nothing to be configured below this line-----------------------*/
+
 /* use incompatible ioctls for reading in raw and cooked mode */
 #define AZT_PRIVATE_IOCTLS
 
@@ -45,6 +62,11 @@
 #define DATA_PORT		azt_port
 #define STATUS_PORT		azt_port+1
 #define MODE_PORT		azt_port+2
+#ifdef  AZT_SW32                
+ #define AZT_SW32_INIT           (unsigned int) (0xFF00 & (AZT_BASE_ADDR*16))
+ #define AZT_SW32_CONFIG_REG     AZT_SW32_BASE_ADDR+0x16  /*Soundwave32 Config. Register*/
+ #define AZT_SW32_ID_REG         AZT_SW32_BASE_ADDR+0x04  /*Soundwave32 ID Version Register*/
+#endif
 
 /* status bits */
 #define AST_CMD_CHECK		0x80		/* command error */
@@ -83,13 +105,6 @@
 #define ACMD_SET_VOLUME		0x93		/* set audio level */
 #define ACMD_GET_VERSION	0xA0		/* get firmware version */
 #define ACMD_SET_MODE		0xA1		/* set drive mode */
-
-#define SET_TIMER(func, jifs) \
-        delay_timer.expires = jifs; \
-        delay_timer.function = (void *) func; \
-        add_timer(&delay_timer);
-
-#define CLEAR_TIMER             del_timer(&delay_timer)
 
 #define MAX_TRACKS		104