patch-2.1.105 linux/drivers/sound/Config.in

Next file: linux/drivers/sound/Makefile
Previous file: linux/drivers/scsi/g_NCR5380.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.104/linux/drivers/sound/Config.in linux/drivers/sound/Config.in
@@ -9,179 +9,184 @@
 
 # Prompt user for primary drivers.
 
-dep_tristate 'ProAudioSpectrum 16 support' CONFIG_SOUND_PAS $CONFIG_SOUND
-if [ "$CONFIG_SOUND_PAS" = "y" ]; then
-    int 'PAS16 IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14 or 15' CONFIG_PAS_IRQ 10
-    int 'PAS16 DMA 0, 1, 3, 5, 6 or 7' CONFIG_PAS_DMA 3
-    bool 'Enable PAS16 joystick port' CONFIG_PAS_JOYSTICK
-fi
-
-dep_tristate '100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support' CONFIG_SOUND_SB $CONFIG_SOUND
-if [ "$CONFIG_SOUND_SB" = "y" ]; then
-    hex 'I/O base for SB Check from manual of the card' CONFIG_SB_BASE 220
-    int 'Sound Blaster IRQ Check from manual of the card' CONFIG_SB_IRQ 7
-    int 'Sound Blaster DMA 0, 1 or 3' CONFIG_SB_DMA 1
-    int 'Sound Blaster 16 bit DMA (SB16, Jazz16, SMW) 5, 6 or 7 (use 1 for 8 bit cards)' CONFIG_SB_DMA2 5
-    hex 'MPU401 I/O base of SB16, Jazz16 and ES1688 Check from manual of the card' CONFIG_SB_MPU_BASE 330
-    comment 'MPU401 IRQ is only required with Jazz16, SM Wave and ESS1688.'
-    comment 'Enter -1 to the following question if you have something else such as SB16/32.'
-    int 'SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Check from manual of the card' CONFIG_SB_MPU_IRQ -1
-fi
-
-dep_tristate 'Generic OPL2/OPL3 FM synthesizer support' CONFIG_SOUND_ADLIB $CONFIG_SOUND
-
-dep_tristate 'Gravis Ultrasound support' CONFIG_SOUND_GUS $CONFIG_SOUND
-if [ "$CONFIG_SOUND_GUS" = "y" -o "$CONFIG_SOUND_GUS" = "m" ]; then
-    bool '16 bit sampling option of GUS (_NOT_ GUS MAX)' CONFIG_GUS16 
-    bool 'GUS MAX support' CONFIG_GUSMAX
-fi
-if [ "$CONFIG_SOUND_GUS" = "y" ]; then
-    hex 'I/O base for GUS 210, 220, 230, 240, 250 or 260' CONFIG_GUS_BASE 220
-    int 'GUS IRQ 3, 5, 7, 9, 11, 12 or 15' CONFIG_GUS_IRQ 15
-    int 'GUS DMA 1, 3, 5, 6 or 7' CONFIG_GUS_DMA 6
-    int 'Second DMA channel for GUS 1, 3, 5, 6 or 7' CONFIG_GUS_DMA2 -1
-    if [ "$CONFIG_GUS16" = "y" ]; then
-	hex 'I/O base for the 16 bit daughtercard of GUS 530, 604, E80 or F40' CONFIG_GUS16_BASE 530
-	int 'GUS 16 bit daughtercard IRQ 3, 4, 5, 7, or 9' CONFIG_GUS16_IRQ 7
-	int 'GUS DMA 0, 1 or 3' CONFIG_GUS16_DMA 3
-    fi
-fi
-
-dep_tristate 'MPU-401 support (NOT for SB16)' CONFIG_SOUND_MPU401 $CONFIG_SOUND
-if [ "$CONFIG_SOUND_MPU401" = "y" ]; then
-    hex 'I/O base for MPU401 Check from manual of the card' CONFIG_MPU_BASE 330
-    int 'MPU401 IRQ Check from manual of the card' CONFIG_MPU_IRQ 9
-fi
-
-dep_tristate 'PSS (AD1848, ADSP-2115, ESC614) support' CONFIG_SOUND_PSS $CONFIG_SOUND
-if [ "$CONFIG_SOUND_PSS" = "y" ]; then
-    hex 'PSS I/O base 220 or 240' CONFIG_PSS_BASE 220
-    hex 'PSS audio I/O base 530, 604, E80 or F40' CONFIG_PSS_MSS_BASE 530
-    int 'PSS audio IRQ 7, 9, 10 or 11' CONFIG_PSS_MSS_IRQ 11
-    int 'PSS audio DMA 0, 1 or 3' CONFIG_PSS_MSS_DMA 3
-    hex 'PSS MIDI I/O base ' CONFIG_PSS_MPU_BASE 330
-    int 'PSS MIDI IRQ 3, 4, 5, 7 or 9' CONFIG_PSS_MPU_IRQ 9
-    bool '  Have DSPxxx.LD firmware file' CONFIG_PSS_HAVE_BOOT
-    if [ "$CONFIG_PSS_HAVE_BOOT" = "y" ]; then
-       string '  Full pathname of DSPxxx.LD firmware file' CONFIG_PSS_BOOT_FILE
-    fi
-fi
-if [ "$CONFIG_SOUND_PSS" = "y" -o "$CONFIG_SOUND_PSS" = "m" ]; then
-    bool '  Enable PSS mixer (Beethoven ADSP-16 and other compatibile)' CONFIG_PSS_MIXER
-fi
-
-dep_tristate 'Microsoft Sound System support' CONFIG_SOUND_MSS $CONFIG_SOUND
-if [ "$CONFIG_SOUND_MSS" = "y" ]; then
-    hex 'MSS/WSS I/O base 530, 604, E80 or F40' CONFIG_MSS_BASE 530
-    int 'MSS/WSS IRQ 7, 9, 10 or 11' CONFIG_MSS_IRQ 11
-    int 'MSS/WSS DMA 0, 1 or 3' CONFIG_MSS_DMA 3
-    int 'MSS/WSS second DMA (if possible) 0, 1 or 3' CONFIG_MSS_DMA2 -1
-fi
-
-dep_tristate 'Ensoniq SoundScape support' CONFIG_SOUND_SSCAPE $CONFIG_SOUND
-if [ "$CONFIG_SOUND_SSCAPE" = "y" ]; then
-    hex 'SoundScape MIDI I/O base 320, 330, 340 or 350' CONFIG_SSCAPE_BASE 330
-    int 'SoundScape MIDI IRQ ' CONFIG_SSCAPE_IRQ 9
-    int 'SoundScape initialization DMA 0, 1 or 3' CONFIG_SSCAPE_DMA 3
-    hex 'SoundScape audio I/O base 534, 608, E84 or F44' CONFIG_SSCAPE_MSS_BASE 534
-    int 'SoundScape audio IRQ 7, 9, 10 or 11' CONFIG_SSCAPE_MSS_IRQ 11
-fi
-
-dep_tristate 'MediaTrix AudioTrix Pro support' CONFIG_SOUND_TRIX $CONFIG_SOUND
-if [ "$CONFIG_SOUND_TRIX" = "y" ]; then
-    hex 'OPL3-SA1 audio I/O base 530, 604, E80 or F40' CONFIG_TRIX_BASE 530
-    int 'OPL3-SA1 audio IRQ 7, 9, 10 or 11' CONFIG_TRIX_IRQ 11
-    int 'OPL3-SA1 audio DMA 0, 1 or 3' CONFIG_TRIX_DMA 0
-    int 'OPL3-SA1 second (duplex) DMA 0, 1 or 3' CONFIG_TRIX_DMA2 3
-    hex 'OPL3-SA1 MIDI I/O base 330, 370, 3B0 or 3F0' CONFIG_TRIX_MPU_BASE 330
-    int 'OPL3-SA1 MIDI IRQ 3, 4, 5, 7 or 9' CONFIG_TRIX_MPU_IRQ 9
-    hex 'OPL3-SA1 SB I/O base 220, 210, 230, 240, 250, 260 or 270' CONFIG_TRIX_SB_BASE 220
-    int 'OPL3-SA1 SB IRQ 3, 4, 5 or 7' CONFIG_TRIX_SB_IRQ 7
-    int 'OPL3-SA1 SB DMA 1 or 3' CONFIG_TRIX_SB_DMA 1
-    bool '  Have TRXPRO.HEX firmware file' CONFIG_TRIX_HAVE_BOOT
-    if [ "$CONFIG_TRIX_HAVE_BOOT" = "y" ]; then
-	string '  Full pathname of TRXPRO.HEX firmware file' CONFIG_TRIX_BOOT_FILE
-    fi
-fi
-
-dep_tristate 'Support for OPTi MAD16 and/or Mozart based cards' CONFIG_SOUND_MAD16 $CONFIG_SOUND
-dep_tristate 'Support MIDI in older MAD16 based cards (requires SB)' CONFIG_MAD16_OLDCARD $CONFIG_SOUND_MAD16
-if [ "$CONFIG_SOUND_MAD16" = "y" ]; then
-    hex 'MAD16 audio I/O base 530, 604, E80 or F40' CONFIG_MAD16_BASE 530
-    int 'MAD16 audio IRQ 7, 9, 10 or 11' CONFIG_MAD16_IRQ 11
-    int 'MAD16 audio DMA 0, 1 or 3' CONFIG_MAD16_DMA 3
-    int 'MAD16 second (duplex) DMA 0, 1 or 3' CONFIG_MAD16_DMA2 0
-    hex 'MAD16 MIDI I/O base 300, 310, 320 or 330 (0 disables)' CONFIG_MAD16_MPU_BASE 330
-    int 'MAD16 MIDI IRQ 5, 7, 9 or 10' CONFIG_MAD16_MPU_IRQ 9
-fi
-
-dep_tristate 'Support for Crystal CS4232 based (PnP) cards' CONFIG_SOUND_CS4232 $CONFIG_SOUND
-if [ "$CONFIG_SOUND_CS4232" = "y" ]; then
-    hex 'CS4232 audio I/O base 530, 604, E80 or F40' CONFIG_CS4232_BASE 530
-    int 'CS4232 audio IRQ 5, 7, 9, 11, 12 or 15' CONFIG_CS4232_IRQ 11
-    int 'CS4232 audio DMA 0, 1 or 3' CONFIG_CS4232_DMA 0
-    int 'CS4232 second (duplex) DMA 0, 1 or 3' CONFIG_CS4232_DMA2 3
-    hex 'CS4232 MIDI I/O base 330, 370, 3B0 or 3F0' CONFIG_CS4232_MPU_BASE 330
-    int 'CS4232 MIDI IRQ 5, 7, 9, 11, 12 or 15' CONFIG_CS4232_MPU_IRQ 9
-fi
-
-dep_tristate 'Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers' CONFIG_SOUND_MAUI $CONFIG_SOUND
-if [ "$CONFIG_SOUND_MAUI" = "y" ]; then
-    hex 'I/O base for Maui 210, 230, 260, 290, 300, 320, 338 or 330' CONFIG_MAUI_BASE 330
-    int 'Maui IRQ 5, 9, 12 or 15' CONFIG_MAUI_IRQ 9
-    bool '  Have OSWF.MOT firmware file' CONFIG_MAUI_HAVE_BOOT
-    if [ "$CONFIG_MAUI_HAVE_BOOT" = "y" ]; then
-	string '  Full pathname of OSWF.MOT firmware file' CONFIG_MAUI_BOOT_FILE
-    fi
-fi
+dep_tristate 'OSS sound modules' CONFIG_SOUND_OSS $CONFIG_SOUND
 
-dep_tristate 'Support for Aztech Sound Galaxy (non-PnP) cards' CONFIG_SGALAXY $CONFIG_SOUND
-if [ "$CONFIG_SGALAXY" = "y" ]; then
-    hex 'SGALAXY audio I/O base 530, 604, E80 or F40' CONFIG_SGALAXY_BASE 530
-    int 'SGALAXY audio IRQ 5, 7, 9, 11, 12 or 15' CONFIG_SGALAXY_IRQ 11
-    int 'SGALAXY audio DMA 0, 1 or 3' CONFIG_SGALAXY_DMA 0
-    int 'SGALAXY second (duplex) DMA 0, 1 or 3' CONFIG_SGALAXY_DMA2 3
-    hex 'SGALAXY SB I/O base 220 or 240' CONFIG_SGALAXY_SGBASE 220
+if [ "$CONFIG_SOUND_OSS" != "n" ]; then
+  dep_tristate 'ProAudioSpectrum 16 support' CONFIG_SOUND_PAS $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_PAS" = "y" ]; then
+      int 'PAS16 IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14 or 15' CONFIG_PAS_IRQ 10
+      int 'PAS16 DMA 0, 1, 3, 5, 6 or 7' CONFIG_PAS_DMA 3
+      bool 'Enable PAS16 joystick port' CONFIG_PAS_JOYSTICK
+  fi
+  
+  dep_tristate '100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support' CONFIG_SOUND_SB $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_SB" = "y" ]; then
+      hex 'I/O base for SB Check from manual of the card' CONFIG_SB_BASE 220
+      int 'Sound Blaster IRQ Check from manual of the card' CONFIG_SB_IRQ 7
+      int 'Sound Blaster DMA 0, 1 or 3' CONFIG_SB_DMA 1
+      int 'Sound Blaster 16 bit DMA (SB16, Jazz16, SMW) 5, 6 or 7 (use 1 for 8 bit cards)' CONFIG_SB_DMA2 5
+      hex 'MPU401 I/O base of SB16, Jazz16 and ES1688 Check from manual of the card' CONFIG_SB_MPU_BASE 330
+      comment 'MPU401 IRQ is only required with Jazz16, SM Wave and ESS1688.'
+      comment 'Enter -1 to the following question if you have something else such as SB16/32.'
+      int 'SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Check from manual of the card' CONFIG_SB_MPU_IRQ -1
+  fi
+  
+  dep_tristate 'Generic OPL2/OPL3 FM synthesizer support' CONFIG_SOUND_ADLIB $CONFIG_SOUND_OSS
+  
+  dep_tristate 'Gravis Ultrasound support' CONFIG_SOUND_GUS $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_GUS" = "y" -o "$CONFIG_SOUND_GUS" = "m" ]; then
+      bool '16 bit sampling option of GUS (_NOT_ GUS MAX)' CONFIG_GUS16 
+      bool 'GUS MAX support' CONFIG_GUSMAX
+  fi
+  if [ "$CONFIG_SOUND_GUS" = "y" ]; then
+      hex 'I/O base for GUS 210, 220, 230, 240, 250 or 260' CONFIG_GUS_BASE 220
+      int 'GUS IRQ 3, 5, 7, 9, 11, 12 or 15' CONFIG_GUS_IRQ 15
+      int 'GUS DMA 1, 3, 5, 6 or 7' CONFIG_GUS_DMA 6
+      int 'Second DMA channel for GUS 1, 3, 5, 6 or 7' CONFIG_GUS_DMA2 -1
+      if [ "$CONFIG_GUS16" = "y" ]; then
+  	hex 'I/O base for the 16 bit daughtercard of GUS 530, 604, E80 or F40' CONFIG_GUS16_BASE 530
+  	int 'GUS 16 bit daughtercard IRQ 3, 4, 5, 7, or 9' CONFIG_GUS16_IRQ 7
+  	int 'GUS DMA 0, 1 or 3' CONFIG_GUS16_DMA 3
+      fi
+  fi
+  
+  dep_tristate 'MPU-401 support (NOT for SB16)' CONFIG_SOUND_MPU401 $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_MPU401" = "y" ]; then
+      hex 'I/O base for MPU401 Check from manual of the card' CONFIG_MPU_BASE 330
+      int 'MPU401 IRQ Check from manual of the card' CONFIG_MPU_IRQ 9
+  fi
+  
+  dep_tristate 'PSS (AD1848, ADSP-2115, ESC614) support' CONFIG_SOUND_PSS $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_PSS" = "y" ]; then
+      hex 'PSS I/O base 220 or 240' CONFIG_PSS_BASE 220
+      hex 'PSS audio I/O base 530, 604, E80 or F40' CONFIG_PSS_MSS_BASE 530
+      int 'PSS audio IRQ 7, 9, 10 or 11' CONFIG_PSS_MSS_IRQ 11
+      int 'PSS audio DMA 0, 1 or 3' CONFIG_PSS_MSS_DMA 3
+      hex 'PSS MIDI I/O base ' CONFIG_PSS_MPU_BASE 330
+      int 'PSS MIDI IRQ 3, 4, 5, 7 or 9' CONFIG_PSS_MPU_IRQ 9
+      bool '  Have DSPxxx.LD firmware file' CONFIG_PSS_HAVE_BOOT
+      if [ "$CONFIG_PSS_HAVE_BOOT" = "y" ]; then
+         string '  Full pathname of DSPxxx.LD firmware file' CONFIG_PSS_BOOT_FILE
+      fi
+  fi
+  if [ "$CONFIG_SOUND_PSS" = "y" -o "$CONFIG_SOUND_PSS" = "m" ]; then
+      bool '  Enable PSS mixer (Beethoven ADSP-16 and other compatibile)' CONFIG_PSS_MIXER
+  fi
+  
+  dep_tristate 'Microsoft Sound System support' CONFIG_SOUND_MSS $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_MSS" = "y" ]; then
+      hex 'MSS/WSS I/O base 530, 604, E80 or F40' CONFIG_MSS_BASE 530
+      int 'MSS/WSS IRQ 7, 9, 10 or 11' CONFIG_MSS_IRQ 11
+      int 'MSS/WSS DMA 0, 1 or 3' CONFIG_MSS_DMA 3
+      int 'MSS/WSS second DMA (if possible) 0, 1 or 3' CONFIG_MSS_DMA2 -1
+  fi
+  
+  dep_tristate 'Ensoniq SoundScape support' CONFIG_SOUND_SSCAPE $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_SSCAPE" = "y" ]; then
+      hex 'SoundScape MIDI I/O base 320, 330, 340 or 350' CONFIG_SSCAPE_BASE 330
+      int 'SoundScape MIDI IRQ ' CONFIG_SSCAPE_IRQ 9
+      int 'SoundScape initialization DMA 0, 1 or 3' CONFIG_SSCAPE_DMA 3
+      hex 'SoundScape audio I/O base 534, 608, E84 or F44' CONFIG_SSCAPE_MSS_BASE 534
+      int 'SoundScape audio IRQ 7, 9, 10 or 11' CONFIG_SSCAPE_MSS_IRQ 11
+  fi
+  
+  dep_tristate 'MediaTrix AudioTrix Pro support' CONFIG_SOUND_TRIX $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_TRIX" = "y" ]; then
+      hex 'TRIX audio I/O base 530, 604, E80 or F40' CONFIG_TRIX_BASE 530
+      int 'TRIX audio IRQ 7, 9, 10 or 11' CONFIG_TRIX_IRQ 11
+      int 'TRIX audio DMA 0, 1 or 3' CONFIG_TRIX_DMA 0
+      int 'TRIX second (duplex) DMA 0, 1 or 3' CONFIG_TRIX_DMA2 3
+      hex 'TRIX MIDI I/O base 330, 370, 3B0 or 3F0' CONFIG_TRIX_MPU_BASE 330
+      int 'TRIX MIDI IRQ 3, 4, 5, 7 or 9' CONFIG_TRIX_MPU_IRQ 9
+      hex 'TRIX SB I/O base 220, 210, 230, 240, 250, 260 or 270' CONFIG_TRIX_SB_BASE 220
+      int 'TRIX SB IRQ 3, 4, 5 or 7' CONFIG_TRIX_SB_IRQ 7
+      int 'TRIX SB DMA 1 or 3' CONFIG_TRIX_SB_DMA 1
+      bool '  Have TRXPRO.HEX firmware file' CONFIG_TRIX_HAVE_BOOT
+      if [ "$CONFIG_TRIX_HAVE_BOOT" = "y" ]; then
+  	string '  Full pathname of TRXPRO.HEX firmware file' CONFIG_TRIX_BOOT_FILE
+      fi
+  fi
+  
+  dep_tristate 'Support for OPTi MAD16 and/or Mozart based cards' CONFIG_SOUND_MAD16 $CONFIG_SOUND_OSS
+  dep_tristate 'Support MIDI in older MAD16 based cards (requires SB)' CONFIG_MAD16_OLDCARD $CONFIG_SOUND_MAD16
+  if [ "$CONFIG_SOUND_MAD16" = "y" ]; then
+      hex 'MAD16 audio I/O base 530, 604, E80 or F40' CONFIG_MAD16_BASE 530
+      int 'MAD16 audio IRQ 7, 9, 10 or 11' CONFIG_MAD16_IRQ 11
+      int 'MAD16 audio DMA 0, 1 or 3' CONFIG_MAD16_DMA 3
+      int 'MAD16 second (duplex) DMA 0, 1 or 3' CONFIG_MAD16_DMA2 0
+      hex 'MAD16 MIDI I/O base 300, 310, 320 or 330 (0 disables)' CONFIG_MAD16_MPU_BASE 330
+      int 'MAD16 MIDI IRQ 5, 7, 9 or 10' CONFIG_MAD16_MPU_IRQ 9
+  fi
+  
+  dep_tristate 'Support for Crystal CS4232 based (PnP) cards' CONFIG_SOUND_CS4232 $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_CS4232" = "y" ]; then
+      hex 'CS4232 audio I/O base 530, 604, E80 or F40' CONFIG_CS4232_BASE 530
+      int 'CS4232 audio IRQ 5, 7, 9, 11, 12 or 15' CONFIG_CS4232_IRQ 11
+      int 'CS4232 audio DMA 0, 1 or 3' CONFIG_CS4232_DMA 0
+      int 'CS4232 second (duplex) DMA 0, 1 or 3' CONFIG_CS4232_DMA2 3
+      hex 'CS4232 MIDI I/O base 330, 370, 3B0 or 3F0' CONFIG_CS4232_MPU_BASE 330
+      int 'CS4232 MIDI IRQ 5, 7, 9, 11, 12 or 15' CONFIG_CS4232_MPU_IRQ 9
+  fi
+  
+  dep_tristate 'Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers' CONFIG_SOUND_MAUI $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_MAUI" = "y" ]; then
+      hex 'I/O base for Maui 210, 230, 260, 290, 300, 320, 338 or 330' CONFIG_MAUI_BASE 330
+      int 'Maui IRQ 5, 9, 12 or 15' CONFIG_MAUI_IRQ 9
+      bool '  Have OSWF.MOT firmware file' CONFIG_MAUI_HAVE_BOOT
+      if [ "$CONFIG_MAUI_HAVE_BOOT" = "y" ]; then
+  	string '  Full pathname of OSWF.MOT firmware file' CONFIG_MAUI_BOOT_FILE
+      fi
+  fi
+  
+  dep_tristate 'Support for Aztech Sound Galaxy (non-PnP) cards' CONFIG_SOUND_SGALAXY $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_SGALAXY" = "y" ]; then
+      hex 'SGALAXY audio I/O base 530, 604, E80 or F40' CONFIG_SGALAXY_BASE 530
+      int 'SGALAXY audio IRQ 5, 7, 9, 11, 12 or 15' CONFIG_SGALAXY_IRQ 11
+      int 'SGALAXY audio DMA 0, 1 or 3' CONFIG_SGALAXY_DMA 0
+      int 'SGALAXY second (duplex) DMA 0, 1 or 3' CONFIG_SGALAXY_DMA2 3
+      hex 'SGALAXY SB I/O base 220 or 240' CONFIG_SGALAXY_SGBASE 220
+  fi
+  
+  dep_tristate 'Yamaha OPL3-SA1 audio controller' CONFIG_SOUND_OPL3SA1 $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_OPL3SA1" = "y" ]; then
+      hex 'OPL3-SA1 audio I/O base 530, 604, E80 or F40' CONFIG_OPL3SA1_BASE 530
+      int 'OPL3-SA1 audio IRQ 7, 9, 10 or 11' CONFIG_OPL3SA1_IRQ 11
+      int 'OPL3-SA1 audio DMA 0, 1 or 3' CONFIG_OPL3SA1_DMA 0
+      int 'OPL3-SA1 second (duplex) DMA 0, 1 or 3' CONFIG_OPL3SA1_DMA2 3
+      hex 'OPL3-SA1 MIDI I/O base 330, 370, 3B0 or 3F0' CONFIG_OPL3SA1_MPU_BASE 330
+      int 'OPL3-SA1 MIDI IRQ 3, 4, 5, 7 or 9' CONFIG_OPL3SA1_MPU_IRQ 9
+  fi
+  
+  dep_tristate 'SoftOSS software wave table engine' CONFIG_SOUND_SOFTOSS $CONFIG_SOUND_OSS
+  if [ "$CONFIG_SOUND_SOFTOSS" = "y" ]; then
+      int 'Sampling rate for SoftOSS 8000 to 48000' CONFIG_SOFTOSS_RATE 22050
+      int 'Max # of concurrent voices for SoftOSS 4 to 32' CONFIG_SOFTOSS_VOICES 32
+  fi
+  
+  dep_tristate 'FM synthesizer (YM3812/OPL-3) support' CONFIG_SOUND_YM3812 $CONFIG_SOUND_OSS
+  
+  dep_tristate 'Loopback MIDI device support' CONFIG_SOUND_VMIDI $CONFIG_SOUND_OSS
+  
+  dep_tristate '6850 UART support' CONFIG_SOUND_UART6850 $CONFIG_SOUND_OSS
+  if [ "$CONFIG_UART6850" = "y" ]; then
+      hex 'I/O base for UART 6850 MIDI port (Unknown)' CONFIG_U6850_BASE 0
+      int 'UART6850 IRQ (Unknown)' CONFIG_U6850_IRQ -1
+  fi
+  
+  if [ "$CONFIG_ARM" = "y" ]; then
+      bool 'VIDC 16-bit sound' CONFIG_VIDC_SOUND
+  fi
+  
+  
+  
+  # Additional low level drivers.
+  
+  mainmenu_option next_comment
+  comment 'Additional low level sound drivers'
+  bool 'Additional low level sound drivers' CONFIG_LOWLEVEL_SOUND $CONFIG_SOUND_OSS
+  if [ "$CONFIG_LOWLEVEL_SOUND" != "n" ]; then
+      source drivers/sound/lowlevel/Config.in
+  fi
+  endmenu
 fi
 
-dep_tristate 'Yamaha OPL3-SA1 audio controller' CONFIG_SOUND_OPL3SA1 $CONFIG_SOUND
-if [ "$CONFIG_SOUND_OPL3SA1" = "y" ]; then
-    hex 'OPL3-SA1 audio I/O base 530, 604, E80 or F40' CONFIG_OPL3SA1_BASE 530
-    int 'OPL3-SA1 audio IRQ 7, 9, 10 or 11' CONFIG_OPL3SA1_IRQ 11
-    int 'OPL3-SA1 audio DMA 0, 1 or 3' CONFIG_OPL3SA1_DMA 0
-    int 'OPL3-SA1 second (duplex) DMA 0, 1 or 3' CONFIG_OPL3SA1_DMA2 3
-    hex 'OPL3-SA1 MIDI I/O base 330, 370, 3B0 or 3F0' CONFIG_OPL3SA1_MPU_BASE 330
-    int 'OPL3-SA1 MIDI IRQ 3, 4, 5, 7 or 9' CONFIG_OPL3SA1_MPU_IRQ 9
-fi
-
-dep_tristate 'SoftOSS software wave table engine' CONFIG_SOUND_SOFTOSS $CONFIG_SOUND
-if [ "$CONFIG_SOUND_SOFTOSS" = "y" ]; then
-    int 'Sampling rate for SoftOSS 8000 to 48000' CONFIG_SOFTOSS_RATE 22050
-    int 'Max # of concurrent voices for SoftOSS 4 to 32' CONFIG_SOFTOSS_VOICES 32
-fi
-
-dep_tristate 'FM synthesizer (YM3812/OPL-3) support' CONFIG_SOUND_YM3812 $CONFIG_SOUND
-
-dep_tristate 'Loopback MIDI device support' CONFIG_SOUND_VMIDI $CONFIG_SOUND
-
-dep_tristate '6850 UART support' CONFIG_SOUND_UART6850 $CONFIG_SOUND
-if [ "$CONFIG_UART6850" = "y" ]; then
-    hex 'I/O base for UART 6850 MIDI port (Unknown)' CONFIG_U6850_BASE 0
-    int 'UART6850 IRQ (Unknown)' CONFIG_U6850_IRQ -1
-fi
-
-if [ "$CONFIG_ARM" = "y" ]; then
-    bool 'VIDC 16-bit sound' CONFIG_VIDC_SOUND
-fi
-
-
-
-# Additional low level drivers.
-
-mainmenu_option next_comment
-comment 'Additional low level sound drivers'
-bool 'Additional low level sound drivers' CONFIG_LOWLEVEL_SOUND $CONFIG_SOUND
-if [ "$CONFIG_LOWLEVEL_SOUND" != "n" ]; then
-    source drivers/sound/lowlevel/Config.in
-fi
-endmenu
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov