patch-2.1.106 linux/include/asm-arm/arch-a5k/dma.h

• Lines: 102
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.1.105/linux/include/asm-arm/arch-a5k/dma.h
• Orig date: Fri May 8 23:14:54 1998

diff -u --recursive --new-file v2.1.105/linux/include/asm-arm/arch-a5k/dma.h linux/include/asm-arm/arch-a5k/dma.h
@@ -1,101 +0,0 @@
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS		0x03000000
-
-#ifdef KERNEL_ARCH_DMA
-
-static inline void arch_disable_dma (int dmanr)
-{
-    printk (dma_str, "arch_disable_dma", dmanr);
-}
-
-static inline void arch_enable_dma (int dmanr)
-{
-    printk (dma_str, "arch_enable_dma", dmanr);
-}
-
-static inline void arch_set_dma_addr (int dmanr, unsigned int addr)
-{
-    printk (dma_str, "arch_set_dma_addr", dmanr);
-}
-
-static inline void arch_set_dma_count (int dmanr, unsigned int count)
-{
-    printk (dma_str, "arch_set_dma_count", dmanr);
-}
-
-static inline void arch_set_dma_mode (int dmanr, char mode)
-{
-    printk (dma_str, "arch_set_dma_mode", dmanr);
-}
-
-static inline int arch_dma_count (int dmanr)
-{
-    printk (dma_str, "arch_dma_count", dmanr);
-    return 0;
-}
-
-#endif
-
-/* enable/disable a specific DMA channel */
-extern void enable_dma(unsigned int dmanr);
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-    switch(dmanr) {
-	case 2:  disable_irq(64); break;
-	default: printk (dma_str, "disable_dma", dmanr); break;
-    }
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-    switch(dmanr) {
-	case 2:  break;
-	default: printk (dma_str, "clear_dma_ff", dmanr); break;
-    }
-}
-
-/* set mode (above) for a specific DMA channel */
-extern void set_dma_mode(unsigned int dmanr, char mode);
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
-{
-    printk (dma_str, "set_dma_page", dmanr);
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-extern void set_dma_addr(unsigned int dmanr, unsigned int addr);
-
-/* Set transfer size for a specific DMA channel.
- */
-extern void set_dma_count(unsigned int dmanr, unsigned int count);
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-extern int get_dma_residue(unsigned int dmanr);
-
-#endif /* _ASM_ARCH_DMA_H */
-