patch-2.1.110 linux/include/linux/wavefront.h

Next file: linux/include/net/sock.h
Previous file: linux/include/linux/vt_kern.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.109/linux/include/linux/wavefront.h linux/include/linux/wavefront.h
@@ -0,0 +1,670 @@
+#ifndef __wavefront_h__
+#define __wavefront_h__
+
+/* WaveFront header file.
+ *   
+ * Copyright (C) by Paul Barton-Davis 1998
+ *
+ * This program is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info.  
+ */
+
+#if (!defined(__GNUC__) && !defined(__GNUG__))
+
+     You will not be able to compile this file correctly without gcc, because
+     it is necessary to pack the "wavefront_alias" structure to a size
+     of 22 bytes, corresponding to 16-bit alignment (as would have been
+     the case on the original platform, MS-DOS). If this is not done,
+     then WavePatch-format files cannot be read/written correctly.
+     The method used to do this here ("__attribute__((packed)") is
+     completely compiler dependent.
+     
+     All other wavefront_* types end up aligned to 32 bit values and
+     still have the same (correct) size.
+
+#else
+
+     /* However, note that as of G++ 2.7.3.2, g++ was unable to
+	correctly parse *type* __attribute__ tags. It will do the
+	right thing if we use the "packed" attribute on each struct
+	member, which has the same semantics anyway. 
+     */
+
+#endif __GNUC__
+
+/***************************** WARNING ********************************
+  PLEASE DO NOT MODIFY THIS FILE IN ANY WAY THAT AFFECTS ITS ABILITY TO 
+  BE USED WITH EITHER C *OR* C++.
+ **********************************************************************/
+
+#ifndef NUM_MIDIKEYS 
+#define NUM_MIDIKEYS 128
+#endif  NUM_MIDIKEYS
+
+#ifndef NUM_MIDICHANNELS
+#define NUM_MIDICHANNELS 16
+#endif  NUM_MIDICHANNELS
+
+/* These are very useful/important. the original wavefront interface
+   was developed on a 16 bit system, where sizeof(int) = 2
+   bytes. Defining things like this makes the code much more portable, and
+   easier to understand without having to toggle back and forth
+   between a 16-bit view of the world and a 32-bit one. 
+ */   
+
+typedef short INT16;
+typedef unsigned short UINT16;
+typedef int INT32;
+typedef unsigned int UINT32;
+typedef char CHAR8;
+typedef unsigned char UCHAR8;
+
+/* Pseudo-commands not part of the WaveFront command set.
+   These are used for various driver controls and direct
+   hardware control.
+ */
+
+#define WFC_DEBUG_DRIVER                0
+#define WFC_FX_IOCTL                    1
+#define WFC_PATCH_STATUS                2
+#define WFC_PROGRAM_STATUS              3
+#define WFC_SAMPLE_STATUS               4
+#define WFC_DISABLE_INTERRUPTS          5
+#define WFC_ENABLE_INTERRUPTS           6
+#define WFC_INTERRUPT_STATUS            7
+#define WFC_ROMSAMPLES_RDONLY           8
+#define WFC_IDENTIFY_SLOT_TYPE          9
+
+/* Wavefront synth commands
+ */
+
+#define WFC_DOWNLOAD_SAMPLE		0x80
+#define WFC_DOWNLOAD_BLOCK		0x81
+#define WFC_DOWNLOAD_MULTISAMPLE	0x82
+#define WFC_DOWNLOAD_SAMPLE_ALIAS	0x83
+#define WFC_DELETE_SAMPLE		0x84
+#define WFC_REPORT_FREE_MEMORY		0x85
+#define WFC_DOWNLOAD_PATCH		0x86
+#define WFC_DOWNLOAD_PROGRAM		0x87
+#define WFC_SET_SYNTHVOL		0x89
+#define WFC_SET_NVOICES			0x8B
+#define WFC_DOWNLOAD_DRUM		0x90
+#define WFC_GET_SYNTHVOL		0x92
+#define WFC_GET_NVOICES			0x94
+#define WFC_DISABLE_CHANNEL		0x9A
+#define WFC_ENABLE_CHANNEL		0x9B
+#define WFC_MISYNTH_OFF			0x9D
+#define WFC_MISYNTH_ON			0x9E
+#define WFC_FIRMWARE_VERSION		0x9F
+#define WFC_GET_NSAMPLES		0xA0
+#define WFC_DISABLE_DRUM_PROGRAM	0xA2
+#define WFC_UPLOAD_PATCH		0xA3
+#define WFC_UPLOAD_PROGRAM		0xA4
+#define WFC_SET_TUNING			0xA6
+#define WFC_GET_TUNING			0xA7
+#define WFC_VMIDI_ON			0xA8
+#define WFC_VMIDI_OFF			0xA9
+#define WFC_MIDI_STATUS			0xAA
+#define WFC_GET_CHANNEL_STATUS		0xAB
+#define WFC_DOWNLOAD_SAMPLE_HEADER	0xAC
+#define WFC_UPLOAD_SAMPLE_HEADER	0xAD
+#define WFC_UPLOAD_MULTISAMPLE		0xAE
+#define WFC_UPLOAD_SAMPLE_ALIAS		0xAF
+#define WFC_IDENTIFY_SAMPLE_TYPE	0xB0
+#define WFC_DOWNLOAD_EDRUM_PROGRAM	0xB1
+#define WFC_UPLOAD_EDRUM_PROGRAM	0xB2
+#define WFC_SET_EDRUM_CHANNEL		0xB3
+#define WFC_INSTOUT_LEVELS		0xB4
+#define WFC_PEAKOUT_LEVELS		0xB5
+#define WFC_REPORT_CHANNEL_PROGRAMS	0xB6
+#define WFC_HARDWARE_VERSION		0xCF
+#define WFC_UPLOAD_SAMPLE_PARAMS	0xD7
+#define WFC_DOWNLOAD_OS			0xF1
+#define WFC_NOOP                        0xFF
+
+#define WF_MAX_SAMPLE   512
+#define WF_MAX_PATCH    256
+#define WF_MAX_PROGRAM  128
+
+#define WF_SECTION_MAX  44   /* longest OS section length */
+
+/* # of bytes we send to the board when sending it various kinds of
+   substantive data, such as samples, patches and programs.
+*/
+
+#define WF_PROGRAM_BYTES 32
+#define WF_PATCH_BYTES 132
+#define WF_SAMPLE_BYTES 27
+#define WF_SAMPLE_HDR_BYTES 25
+#define WF_ALIAS_BYTES 25
+#define WF_DRUM_BYTES 9
+#define WF_MSAMPLE_BYTES 259 /* (MIDI_KEYS * 2) + 3 */
+
+#define WF_ACK     0x80
+#define WF_DMA_ACK 0x81
+
+/* OR-values for MIDI status bits */
+
+#define WF_MIDI_VIRTUAL_ENABLED 0x1
+#define WF_MIDI_VIRTUAL_IS_EXTERNAL 0x2
+#define WF_MIDI_IN_TO_SYNTH_DISABLED 0x4
+
+/* See wavefront.c for details */
+
+#define WAVEFRONT_MAX_DEVICES 1 /* How many WaveFront cards we can handle */
+
+/* slot indexes for struct address_info: makes code a little more mnemonic */
+
+#define WF_SYNTH_SLOT         0
+#define WF_INTERNAL_MIDI_SLOT 1
+#define WF_EXTERNAL_MIDI_SLOT 2
+
+/* Magic MIDI bytes used to switch I/O streams on the ICS2115 MPU401
+   emulation. Note these NEVER show up in output from the device and
+   should NEVER be used in input unless Virtual MIDI mode has been 
+   disabled. If they do show up as input, the results are unpredictable.
+*/
+
+#define WF_EXTERNAL_SWITCH  0xFD
+#define WF_INTERNAL_SWITCH  0xF9
+
+/* Debugging flags */
+
+#define WF_DEBUG_CMD 0x1
+#define WF_DEBUG_DATA 0x2
+#define WF_DEBUG_LOAD_PATCH 0x4
+#define WF_DEBUG_IO 0x8
+
+/* WavePatch file format stuff */
+
+#define WF_WAVEPATCH_VERSION     120;  /*  Current version number (1.2)  */
+#define WF_MAX_COMMENT           64    /*  Comment length */
+#define WF_NUM_LAYERS            4
+#define WF_NAME_LENGTH           32
+#define WF_SOURCE_LENGTH         260
+
+#define BankFileID     "Bank"
+#define DrumkitFileID  "DrumKit"
+#define ProgramFileID  "Program"
+
+struct wf_envelope
+{
+    UCHAR8 attack_time:7;
+    UCHAR8 Unused1:1;
+
+    UCHAR8 decay1_time:7;
+    UCHAR8 Unused2:1;
+
+    UCHAR8 decay2_time:7;
+    UCHAR8 Unused3:1;
+
+    UCHAR8 sustain_time:7;
+    UCHAR8 Unused4:1;
+
+    UCHAR8 release_time:7;
+    UCHAR8 Unused5:1;
+
+    UCHAR8 release2_time:7;
+    UCHAR8 Unused6:1;
+
+    CHAR8 attack_level;
+    CHAR8 decay1_level;
+    CHAR8 decay2_level;
+    CHAR8 sustain_level;
+    CHAR8 release_level;
+
+    UCHAR8 attack_velocity:7;
+    UCHAR8 Unused7:1;
+
+    UCHAR8 volume_velocity:7;
+    UCHAR8 Unused8:1;
+
+    UCHAR8 keyboard_scaling:7;
+    UCHAR8 Unused9:1;
+};
+typedef struct wf_envelope wavefront_envelope;
+
+struct wf_lfo
+{
+    UCHAR8 sample_number;
+
+    UCHAR8 frequency:7;
+    UCHAR8 Unused1:1;
+
+    UCHAR8 am_src:4;
+    UCHAR8 fm_src:4;
+
+    CHAR8 fm_amount;
+    CHAR8 am_amount;
+    CHAR8 start_level;
+    CHAR8 end_level;
+
+    UCHAR8 ramp_delay:7;
+    UCHAR8 wave_restart:1; /* for LFO2 only */
+
+    UCHAR8 ramp_time:7;
+    UCHAR8 Unused2:1;
+};
+typedef struct wf_lfo wavefront_lfo;
+
+struct wf_patch
+{
+    INT16  frequency_bias;         /*  ** THIS IS IN MOTOROLA FORMAT!! ** */
+
+    UCHAR8 amplitude_bias:7;
+    UCHAR8 Unused1:1;
+
+    UCHAR8 portamento:7;
+    UCHAR8 Unused2:1;
+
+    UCHAR8 sample_number;
+
+    UCHAR8 pitch_bend:4;
+    UCHAR8 sample_msb:1;
+    UCHAR8 Unused3:3;
+
+    UCHAR8 mono:1;
+    UCHAR8 retrigger:1;
+    UCHAR8 nohold:1;
+    UCHAR8 restart:1;
+    UCHAR8 filterconfig:2; /* SDK says "not used" */
+    UCHAR8 reuse:1;
+    UCHAR8 reset_lfo:1;    
+
+    UCHAR8 fm_src2:4;
+    UCHAR8 fm_src1:4;   
+
+    CHAR8 fm_amount1;
+    CHAR8 fm_amount2;
+
+    UCHAR8 am_src:4;
+    UCHAR8 Unused4:4;
+
+    CHAR8 am_amount;
+
+    UCHAR8 fc1_mode:4;
+    UCHAR8 fc2_mode:4;
+
+    CHAR8 fc1_mod_amount;
+    CHAR8 fc1_keyboard_scaling;
+    CHAR8 fc1_bias;
+    CHAR8 fc2_mod_amount;
+    CHAR8 fc2_keyboard_scaling;
+    CHAR8 fc2_bias;
+
+    UCHAR8 randomizer:7;
+    UCHAR8 Unused5:1;
+
+    struct wf_envelope envelope1;
+    struct wf_envelope envelope2;
+    struct wf_lfo lfo1;
+    struct wf_lfo lfo2;
+};
+typedef struct wf_patch wavefront_patch;
+
+struct wf_layer
+{
+    UCHAR8 patch_number;
+
+    UCHAR8 mix_level:7;
+    UCHAR8 mute:1;
+
+    UCHAR8 split_point:7;
+    UCHAR8 updown:1;
+
+    UCHAR8 pan_mod_src:2;
+    UCHAR8 pan_or_mod:1;
+    UCHAR8 pan:4;
+    UCHAR8 split_type:1;
+};
+typedef struct wf_layer wavefront_layer;
+
+struct wf_program
+{
+    struct wf_layer layer[WF_NUM_LAYERS];
+};
+typedef struct wf_program wavefront_program;
+
+struct wf_sample_offset
+{
+    INT32 Fraction:4;
+    INT32 Integer:20;
+    INT32 Unused:8;
+};
+typedef struct wf_sample_offset wavefront_sample_offset;          
+     
+/* Sample slot types */
+
+#define WF_ST_SAMPLE      0
+#define WF_ST_MULTISAMPLE 1
+#define WF_ST_ALIAS       2
+#define WF_ST_EMPTY       3
+
+/* pseudo's */
+
+#define WF_ST_DRUM        4
+#define WF_ST_PROGRAM     5
+#define WF_ST_PATCH       6
+#define WF_ST_SAMPLEHDR   7
+
+#define WF_ST_MASK        0xf
+
+/* Flags for slot status. These occupy the upper bits of the same byte
+   as a sample type.
+*/
+
+#define WF_SLOT_USED      0x80   /* XXX don't rely on this being accurate */
+#define WF_SLOT_FILLED    0x40
+#define WF_SLOT_ROM       0x20
+
+#define WF_SLOT_MASK      0xf0
+
+/* channel constants */
+
+#define WF_CH_MONO  0
+#define WF_CH_LEFT  1
+#define WF_CH_RIGHT 2
+
+/* Sample formats */
+
+#define LINEAR_16BIT 0
+#define WHITE_NOISE  1
+#define LINEAR_8BIT  2
+#define MULAW_8BIT   3
+
+#define WF_SAMPLE_IS_8BIT(smpl) ((smpl)->SampleResolution&2)
+
+
+/* 
+
+  Because most/all of the sample data we pass in via pointers has
+  never been copied (just mmap-ed into user space straight from the
+  disk), it would be nice to allow handling of multi-channel sample
+  data without forcing user-level extraction of the relevant bytes.
+  
+  So, we need a way of specifying which channel to use (the WaveFront
+  only handles mono samples in a given slot), and the only way to do
+  this without using some struct other than wavefront_sample as the
+  interface is the awful hack of using the unused bits in a
+  wavefront_sample:
+  
+  Val      Meaning
+  ---      -------
+  0        no channel selection (use channel 1, sample is MONO)
+  1        use first channel, and skip one
+  2        use second channel, and skip one
+  3        use third channel, and skip two
+  4        use fourth channel, skip three
+  5        use fifth channel, skip four
+  6        use six channel, skip five
+
+
+  This can handle up to 4 channels, and anyone downloading >4 channels
+  of sample data just to select one of them needs to find some tools
+  like sox ...
+
+  NOTE: values 0, 1 and 2 correspond to WF_CH_* above. This is 
+  important.
+
+*/
+
+#define WF_SET_CHANNEL(samp,chn) \
+ (samp)->Unused1 = chn & 0x1; \
+ (samp)->Unused2 = chn & 0x2; \
+ (samp)->Unused3 = chn & 0x4 
+  
+#define WF_GET_CHANNEL(samp) \
+  (((samp)->Unused3 << 2)|((samp)->Unused2<<1)|(samp)->Unused1)
+  
+typedef struct wf_sample {
+    struct wf_sample_offset sampleStartOffset;
+    struct wf_sample_offset loopStartOffset;
+    struct wf_sample_offset loopEndOffset;
+    struct wf_sample_offset sampleEndOffset;
+    INT16 FrequencyBias;
+    UCHAR8 SampleResolution:2;  /* sample_format */
+    UCHAR8 Unused1:1;
+    UCHAR8 Loop:1;
+    UCHAR8 Bidirectional:1;
+    UCHAR8 Unused2:1;
+    UCHAR8 Reverse:1;
+    UCHAR8 Unused3:1;
+} wavefront_sample;
+
+typedef struct wf_multisample {
+    INT16 NumberOfSamples;   /* log2 of the number of samples */
+    INT16 SampleNumber[NUM_MIDIKEYS];
+} wavefront_multisample;
+
+typedef struct wf_alias {
+    INT16 OriginalSample __attribute__ ((packed));
+
+    struct wf_sample_offset sampleStartOffset __attribute__ ((packed));
+    struct wf_sample_offset loopStartOffset __attribute__ ((packed));
+    struct wf_sample_offset sampleEndOffset __attribute__ ((packed));
+    struct wf_sample_offset loopEndOffset __attribute__ ((packed));
+
+    INT16  FrequencyBias __attribute__ ((packed));
+
+    UCHAR8 SampleResolution:2  __attribute__ ((packed));
+    UCHAR8 Unused1:1  __attribute__ ((packed));
+    UCHAR8 Loop:1 __attribute__ ((packed));
+    UCHAR8 Bidirectional:1  __attribute__ ((packed));
+    UCHAR8 Unused2:1 __attribute__ ((packed));
+    UCHAR8 Reverse:1 __attribute__ ((packed));
+    UCHAR8 Unused3:1 __attribute__ ((packed)); 
+    
+    /* This structure is meant to be padded only to 16 bits on their
+       original. Of course, whoever wrote their documentation didn't
+       realize that sizeof(struct) can be >=
+       sum(sizeof(struct-fields)) and so thought that giving a C level
+       description of the structs used in WavePatch files was
+       sufficient. I suppose it was, as long as you remember the 
+       standard 16->32 bit issues.
+    */
+
+    UCHAR8 sixteen_bit_padding __attribute__ ((packed));
+} wavefront_alias;
+
+typedef struct wf_drum {
+    UCHAR8 PatchNumber;
+    UCHAR8 MixLevel:7;
+    UCHAR8 Unmute:1;
+    UCHAR8 Group:4;
+    UCHAR8 Unused1:4;
+    UCHAR8 PanModSource:2;
+    UCHAR8 PanModulated:1;
+    UCHAR8 PanAmount:4;
+    UCHAR8 Unused2:1;
+} wavefront_drum;
+
+typedef struct wf_drumkit {
+    struct wf_drum drum[NUM_MIDIKEYS];
+} wavefront_drumkit;
+
+typedef struct wf_channel_programs {
+    UCHAR8 Program[NUM_MIDICHANNELS];
+} wavefront_channel_programs;
+
+/* How to get MIDI channel status from the data returned by
+   a WFC_GET_CHANNEL_STATUS command (a struct wf_channel_programs)
+*/
+
+#define WF_CHANNEL_STATUS(ch,wcp) (wcp)[(ch/7)] & (1<<((ch)%7))
+
+typedef union wf_any {
+    wavefront_sample s;
+    wavefront_multisample ms;
+    wavefront_alias a;
+    wavefront_program pr;
+    wavefront_patch p;
+    wavefront_drum d;
+} wavefront_any;
+
+/* Hannu Solvainen hoped that his "patch_info" struct in soundcard.h
+   might work for other wave-table based patch loading situations.
+   Alas, his fears were correct. The WaveFront doesn't even come with
+   just "patches", but several different kind of structures that
+   control the sound generation process.
+ */
+
+typedef struct wf_patch_info {
+    
+    INT16   key;               /* Use WAVEFRONT_PATCH here */
+    UINT16  devno;             /* fill in when sending */
+    UCHAR8  subkey;            /* WF_ST_{SAMPLE,ALIAS,etc.} */
+    UINT16  number;            /* patch/sample/prog number */
+
+    UINT32  size;              /* size of any data included in 
+				  one of the fields in `hdrptr', or
+				  as `dataptr'.
+
+				  NOTE: for actual samples, this is
+				  the size of the *SELECTED CHANNEL*
+				  even if more data is actually available.
+				  
+				  So, a stereo sample (2 channels) of
+				  6000 bytes total has `size' = 3000.
+
+				  See the macros and comments for
+				  WF_{GET,SET}_CHANNEL above.
+
+			       */
+    wavefront_any *hdrptr;      /* user-space ptr to hdr bytes */
+    UINT16 *dataptr;            /* actual sample data */
+
+    wavefront_any hdr;          /* kernel-space copy of hdr bytes */         
+} wavefront_patch_info;
+
+/* The maximum number of bytes we will ever move to or from user space
+   in response to a WFC_* command.  This obviously doesn't cover
+   actual sample data.
+*/
+
+#define WF_MAX_READ sizeof(wavefront_multisample)
+#define WF_MAX_WRITE sizeof(wavefront_multisample)
+
+/*
+   This allows us to execute any WF command except the download/upload
+   ones, which are handled differently due to copyin/copyout issues as
+   well as data-nybbling to/from the card.
+ */
+
+typedef struct wavefront_control {
+    int devno;                         /* from /dev/sequencer interface */
+    int cmd;                           /* WFC_* */
+    char status;                       /* return status to user-space */
+    unsigned char rbuf[WF_MAX_READ];   /* bytes read from card */
+    unsigned char wbuf[WF_MAX_WRITE];  /* bytes written to card */
+} wavefront_control;
+
+/* Modulator table */
+
+#define WF_MOD_LFO1      0
+#define WF_MOD_LFO2      1
+#define WF_MOD_ENV1      2
+#define WF_MOD_ENV2      3
+#define WF_MOD_KEYBOARD  4
+#define WF_MOD_LOGKEY    5
+#define WF_MOD_VELOCITY  6
+#define WF_MOD_LOGVEL    7
+#define WF_MOD_RANDOM    8
+#define WF_MOD_PRESSURE  9
+#define WF_MOD_MOD_WHEEL 10
+#define WF_MOD_1         WF_MOD_MOD_WHEEL 
+#define WF_MOD_BREATH    11
+#define WF_MOD_2         WF_MOD_BREATH
+#define WF_MOD_FOOT      12
+#define WF_MOD_4         WF_MOD_FOOT
+#define WF_MOD_VOLUME    13
+#define WF_MOD_7         WF_MOD_VOLUME
+#define WF_MOD_PAN       14
+#define WF_MOD_10        WF_MOD_PAN
+#define WF_MOD_EXPR      15
+#define WF_MOD_11        WF_MOD_EXPR
+
+/* FX-related material */
+
+typedef struct wf_fx_info {
+    int request;             /* see list below */
+    int data[4];             /* we don't need much */
+} wavefront_fx_info;
+
+/* support for each of these will be forthcoming once I or someone 
+   else has figured out which of the addresses on page 6 and page 7 of 
+   the YSS225 control each parameter. Incidentally, these come from
+   the Windows driver interface, but again, Turtle Beach didn't
+   document the API to use them.
+*/
+
+#define WFFX_SETOUTGAIN		        0
+#define WFFX_SETSTEREOOUTGAIN		1
+#define WFFX_SETREVERBIN1GAIN		2
+#define WFFX_SETREVERBIN2GAIN		3
+#define WFFX_SETREVERBIN3GAIN		4
+#define WFFX_SETCHORUSINPORT		5
+#define WFFX_SETREVERBIN1PORT		6
+#define WFFX_SETREVERBIN2PORT		7
+#define WFFX_SETREVERBIN3PORT		8
+#define WFFX_SETEFFECTPORT		9
+#define WFFX_SETAUXPORT		        10
+#define WFFX_SETREVERBTYPE		11
+#define WFFX_SETREVERBDELAY		12
+#define WFFX_SETCHORUSLFO		13
+#define WFFX_SETCHORUSPMD		14
+#define WFFX_SETCHORUSAMD		15
+#define WFFX_SETEFFECT		        16
+#define WFFX_SETBASEALL		        17
+#define WFFX_SETREVERBALL		18
+#define WFFX_SETCHORUSALL		20
+#define WFFX_SETREVERBDEF		22
+#define WFFX_SETCHORUSDEF		23
+#define WFFX_DELAYSETINGAIN		24
+#define WFFX_DELAYSETFBGAIN	        25
+#define WFFX_DELAYSETFBLPF		26
+#define WFFX_DELAYSETGAIN		27
+#define WFFX_DELAYSETTIME		28
+#define WFFX_DELAYSETFBTIME		29
+#define WFFX_DELAYSETALL		30
+#define WFFX_DELAYSETDEF		32
+#define WFFX_SDELAYSETINGAIN		33
+#define WFFX_SDELAYSETFBGAIN		34
+#define WFFX_SDELAYSETFBLPF		35
+#define WFFX_SDELAYSETGAIN		36
+#define WFFX_SDELAYSETTIME		37
+#define WFFX_SDELAYSETFBTIME		38
+#define WFFX_SDELAYSETALL		39
+#define WFFX_SDELAYSETDEF		41
+#define WFFX_DEQSETINGAIN		42
+#define WFFX_DEQSETFILTER		43
+#define WFFX_DEQSETALL		        44
+#define WFFX_DEQSETDEF		        46
+#define WFFX_MUTE		        47
+#define WFFX_FLANGESETBALANCE	        48	
+#define WFFX_FLANGESETDELAY		49
+#define WFFX_FLANGESETDWFFX_TH		50
+#define WFFX_FLANGESETFBGAIN		51
+#define WFFX_FLANGESETINGAIN		52
+#define WFFX_FLANGESETLFO		53
+#define WFFX_FLANGESETALL		54
+#define WFFX_FLANGESETDEF		56
+#define WFFX_PITCHSETSHIFT		57
+#define WFFX_PITCHSETBALANCE		58
+#define WFFX_PITCHSETALL		59
+#define WFFX_PITCHSETDEF		61
+#define WFFX_SRSSETINGAIN		62
+#define WFFX_SRSSETSPACE		63
+#define WFFX_SRSSETCENTER		64
+#define WFFX_SRSSETGAIN		        65
+#define WFFX_SRSSETMODE	        	66
+#define WFFX_SRSSETDEF		        68
+
+/* Allow direct user-space control over FX memory/coefficient data.
+   In theory this could be used to download the FX microprogram,
+   but it would be a little slower, and involve some wierd code.
+ */
+
+#define WFFX_MEMSET              69
+
+#endif __wavefront_h__

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov