patch-2.1.51 linux/drivers/macintosh/control.c

Next file: linux/drivers/macintosh/control.h
Previous file: linux/drivers/macintosh/aty.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.50/linux/drivers/macintosh/control.c linux/drivers/macintosh/control.c
@@ -0,0 +1,520 @@
+/*
+ * control.c: Console support for PowerMac "control" display adaptor.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ *	
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/vc_ioctl.h>
+#include <linux/nvram.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/cuda.h>
+#include <linux/selection.h>
+#include "pmac-cons.h"
+#include "control.h"
+
+/*
+ * Structure of the registers for the RADACAL colormap device.
+ */
+struct cmap_regs {
+	unsigned char addr;
+	char pad1[15];
+	unsigned char d1;
+	char pad2[15];
+	unsigned char d2;
+	char pad3[15];
+	unsigned char lut;
+	char pad4[15];
+};
+
+/*
+ * Structure of the registers for the "control" display adaptor".
+ */
+#define PAD(x)	char x[12]
+
+struct preg {			/* padded register */
+	unsigned r;
+	char pad[12];
+};
+
+struct control_regs {
+	struct preg vcount;	/* vertical counter */
+	/* Vertical parameters are in units of 1/2 scan line */
+	struct preg vswin;	/* between vsblank and vssync */
+	struct preg vsblank;	/* vert start blank */
+	struct preg veblank;	/* vert end blank (display start) */
+	struct preg vewin;	/* between vesync and veblank */
+	struct preg vesync;	/* vert end sync */
+	struct preg vssync;	/* vert start sync */
+	struct preg vperiod;	/* vert period */
+	struct preg reg8;
+	/* Horizontal params are in units of 2 pixels */
+	struct preg hperiod;	/* horiz period - 2 */
+	struct preg hsblank;	/* horiz start blank */
+	struct preg heblank;	/* horiz end blank */
+	struct preg hesync;	/* horiz end sync */
+	struct preg hssync;	/* horiz start sync */
+	struct preg rege;
+	struct preg regf;
+	struct preg reg10;
+	struct preg reg11;
+	struct preg ctrl;	/* display control */
+	struct preg start_addr;	/* start address: 5 lsbs zero */
+	struct preg pitch;	/* addrs diff between scan lines */
+	struct preg mon_sense;	/* monitor sense bits */
+	struct preg flags;
+	struct preg mode;
+	struct preg reg18;
+	struct preg reg19;
+	struct preg res[6];
+};
+
+static void set_control_clock(unsigned char *params);
+static int read_control_sense(void);
+static int control_vram_reqd(int vmode, int cmode);
+
+static int total_vram;		/* total amount of video memory, bytes */
+static unsigned char *frame_buffer;
+static struct cmap_regs *cmap_regs;
+static struct control_regs *disp_regs;
+static int control_use_bank2;
+
+/*
+ * Register initialization tables for the control display.
+ *
+ * Dot clock rate is
+ * 3.9064MHz * 2**clock_params[2] * clock_params[1] / clock_params[0].
+ *
+ * The values for vertical frequency (V) in the comments below
+ * are the values measured using the modes under MacOS.
+ */
+struct control_regvals {
+	int	pitch[3];		/* bytes/line, indexed by color_mode */
+	int	offset[3];		/* first pixel address */
+	unsigned regs[16];		/* for vswin .. reg10 */
+	unsigned char mode[3];		/* indexed by color_mode */
+	unsigned char radacal_ctrl[3];
+	unsigned char clock_params[3];
+};
+
+/* Register values for 1280x1024, 75Hz mode (20) */
+static struct control_regvals control_reg_init_20 = {
+	{ 1280, 2560, 0 },
+	{ 0x10, 0x20, 0 },
+	{ 2129, 2128, 80, 42, 4, 2130, 2132, 88,
+	  420, 411, 91, 35, 421, 18, 211, 386, },
+	{ 1, 1, 1},
+	{ 0x50, 0x64, 0x64 },
+	{ 13, 56, 3 }	/* pixel clock = 134.61MHz for V=74.81Hz */
+};
+
+/* Register values for 1280x960, 75Hz mode (19) */
+static struct control_regvals control_reg_init_19 = {
+	{ 1280, 2560, 0 },
+	{ 0x10, 0x20, 0 },
+	{ 1997, 1996, 76, 40, 4, 1998, 2000, 86,
+	  418, 409, 89, 35, 419, 18, 210, 384, },
+	{ 1, 1, 1 },
+	{ 0x50, 0x64, 0x64 },
+	{ 31, 125, 3 }	/* pixel clock = 126.01MHz for V=75.01 Hz */
+};
+
+/* Register values for 1152x870, 75Hz mode (18) */
+static struct control_regvals control_reg_init_18 = {
+	{ 1152, 2304, 4608 },
+	{ 0x10, 0x28, 0x50 },
+	{ 1825, 1822, 82, 43, 4, 1828, 1830, 120,
+	  726, 705, 129, 63, 727, 32, 364, 664 },
+	{ 2, 1, 1 },
+	{ 0x10, 0x14, 0x28 },
+	{ 19, 61, 3 }	/* pixel clock = 100.33MHz for V=75.31Hz */
+};
+
+/* Register values for 1024x768, 75Hz mode (17) */
+static struct control_regvals control_reg_init_17 = {
+	{ 1024, 2048, 4096 },
+	{ 0x10, 0x28, 0x50 },
+	{ 1603, 1600, 64, 34, 4, 1606, 1608, 120,
+	  662, 641, 129, 47, 663, 24, 332, 616 },
+	{ 2, 1, 1 },
+	{ 0x10, 0x14, 0x28 },
+	{ 11, 28, 3 }	/* pixel clock = 79.55MHz for V=74.50Hz */
+};
+
+/* Register values for 1024x768, 72Hz mode (15) */
+static struct control_regvals control_reg_init_15 = {
+	{ 1024, 2048, 4096 },
+	{ 0x10, 0x28, 0x50 },
+	{ 1607, 1604, 68, 39, 10, 1610, 1612, 132,
+	  670, 653, 141, 67, 671, 34, 336, 604, },
+	{ 2, 1, 1 },
+	{ 0x10, 0x14, 0x28 },
+	{ 12, 30, 3 }	/* pixel clock = 78.12MHz for V=72.12Hz */
+};
+
+/* Register values for 1024x768, 60Hz mode (14) */
+static struct control_regvals control_reg_init_14 = {
+	{ 1024, 2048, 4096 },
+	{ 0x10, 0x28, 0x50 },
+	{ 1607, 1604, 68, 39, 10, 1610, 1612, 132,
+	  670, 653, 141, 67, 671, 34, 336, 604, },
+	{ 2, 1, 1 },
+	{ 0x10, 0x14, 0x28 },
+	{ 15, 31, 3 }	/* pixel clock = 64.58MHz for V=59.62Hz */
+};
+
+/* Register values for 832x624, 75Hz mode (13) */
+static struct control_regvals control_reg_init_13 = {
+	{ 832, 1664, 3328 },
+	{ 0x10, 0x28, 0x50 },
+	{ 1331, 1330, 82, 43, 4, 1332, 1334, 128,
+	  574, 553, 137, 31, 575, 16, 288, 544 },
+	{ 2, 1, 0 }, { 0x10, 0x14, 0x18 },
+	{ 23, 42, 3 }	/* pixel clock = 57.07MHz for V=74.27Hz */
+};
+
+/* Register values for 800x600, 75Hz mode (12) */
+static struct control_regvals control_reg_init_12 = {
+	{ 800, 1600, 3200 },
+	{ 0x10, 0x28, 0x50 },
+	{ 1247, 1246, 46, 25, 4, 1248, 1250, 104,
+	  526, 513, 113, 39, 527, 20, 264, 488, },
+	{ 2, 1, 0 }, { 0x10, 0x14, 0x18 },
+	{ 7, 11, 3 }	/* pixel clock = 49.11MHz for V=74.40Hz */
+};
+
+/* Register values for 800x600, 72Hz mode (11) */
+static struct control_regvals control_reg_init_11 = {
+	{ 800, 1600, 3200 },
+	{ 0x10, 0x28, 0x50 },
+	{ 1293, 1256, 56, 33, 10, 1330, 1332, 76,
+	  518, 485, 85, 59, 519, 30, 260, 460, },
+	{ 2, 1, 0 }, { 0x10, 0x14, 0x18 },
+	{ 17, 27, 3 }	/* pixel clock = 49.63MHz for V=71.66Hz */
+};
+
+/* Register values for 800x600, 60Hz mode (10) */
+static struct control_regvals control_reg_init_10 = {
+	{ 800, 1600, 3200 },
+	{ 0x10, 0x28, 0x50 },
+	{ 1293, 1256, 56, 33, 10, 1330, 1332, 76,
+	  518, 485, 85, 59, 519, 30, 260, 460, },
+	{ 2, 1, 0 }, { 0x10, 0x14, 0x18 },
+	{ 20, 53, 2 }	/* pixel clock = 41.41MHz for V=59.78Hz */
+};
+
+/* Register values for 640x870, 75Hz Full Page Display (7) */
+static struct control_regvals control_reg_init_7 = {
+        { 640, 1280, 2560 },
+	{ 0x10, 0x30, 0x68 },
+	{ 0x727, 0x724, 0x58, 0x2e, 0x4, 0x72a, 0x72c, 0x40,
+	  0x19e, 0x18c, 0x4c, 0x27, 0x19f, 0x14, 0xd0, 0x178 },
+	{ 2, 1, 0 }, { 0x10, 0x14, 0x18 },
+	{ 9, 33, 2 }	/* pixel clock = 57.29MHz for V=75.01Hz */
+};
+
+/* Register values for 640x480, 67Hz mode (6) */
+static struct control_regvals control_reg_init_6 = {
+	{ 640, 1280, 2560 },
+	{ 0, 8, 0x10 },
+	{ 1045, 1042, 82, 43, 4, 1048, 1050, 72,
+	  430, 393, 73, 31, 431, 16, 216, 400 },
+	{ 2, 1, 0 }, { 0x10, 0x14, 0x18 },
+	{ 14, 27, 2 }	/* pixel clock = 30.13MHz for V=66.43Hz */
+};
+
+/* Register values for 640x480, 60Hz mode (5) */
+static struct control_regvals control_reg_init_5 = {
+	{ 640, 1280, 2560 },
+	{ 0x10, 0x28, 0x50 },
+	{ 1037, 1026, 66, 34, 2, 1048, 1050, 56,
+	  398, 385, 65, 47, 399, 24, 200, 352, },
+	{ 2, 1, 0 }, { 0x10, 0x14, 0x18 },
+	{ 23, 37, 2 }	/* pixel clock = 25.14MHz for V=59.85Hz */
+};
+
+static struct control_regvals *control_reg_init[20] = {
+	NULL, NULL, NULL, NULL,
+	&control_reg_init_5,
+	&control_reg_init_6,
+	&control_reg_init_7,
+	NULL, NULL,
+	&control_reg_init_10,
+	&control_reg_init_11,
+	&control_reg_init_12,
+	&control_reg_init_13,
+	&control_reg_init_14,
+	&control_reg_init_15,
+	NULL,
+	&control_reg_init_17,
+	&control_reg_init_18,
+	&control_reg_init_19,
+	&control_reg_init_20
+};
+
+/*
+ * Get the monitor sense value.
+ * Note that this can be called before calibrate_delay,
+ * so we can't use udelay.
+ */
+static int
+read_control_sense()
+{
+	int sense;
+
+	out_le32(&disp_regs->mon_sense.r, 7);	/* drive all lines high */
+	__delay(200);
+	out_le32(&disp_regs->mon_sense.r, 077);	/* turn off drivers */
+	__delay(2000);
+	sense = (in_le32(&disp_regs->mon_sense.r) & 0x1c0) << 2;
+
+	/* drive each sense line low in turn and collect the other 2 */
+	out_le32(&disp_regs->mon_sense.r, 033);	/* drive A low */
+	__delay(2000);
+	sense |= (in_le32(&disp_regs->mon_sense.r) & 0xc0) >> 2;
+	out_le32(&disp_regs->mon_sense.r, 055);	/* drive B low */
+	__delay(2000);
+	sense |= ((in_le32(&disp_regs->mon_sense.r) & 0x100) >> 5)
+		| ((in_le32(&disp_regs->mon_sense.r) & 0x40) >> 4);
+	out_le32(&disp_regs->mon_sense.r, 066);	/* drive C low */
+	__delay(2000);
+	sense |= (in_le32(&disp_regs->mon_sense.r) & 0x180) >> 7;
+
+	out_le32(&disp_regs->mon_sense.r, 077);	/* turn off drivers */
+	return sense;
+}
+
+static inline int control_vram_reqd(int vmode, int cmode)
+{
+	return vmode_attrs[vmode-1].vres
+		* control_reg_init[vmode-1]->pitch[cmode];
+}
+
+void
+map_control_display(struct device_node *dp)
+{
+	int i, sense;
+	unsigned long addr, size;
+	int bank1, bank2;
+
+	if (dp->next != 0)
+		printk("Warning: only using first control display device\n");
+	if (dp->n_addrs != 2)
+		panic("expecting 2 addresses for control (got %d)", dp->n_addrs);
+
+#if 0
+	printk("pmac_display_init: node = %p, addrs =", dp->node);
+	for (i = 0; i < dp->n_addrs; ++i)
+		printk(" %x(%x)", dp->addrs[i].address, dp->addrs[i].size);
+	printk(", intrs =");
+	for (i = 0; i < dp->n_intrs; ++i)
+		printk(" %x", dp->intrs[i]);
+	printk("\n");
+#endif
+
+	/* Map in frame buffer and registers */
+	for (i = 0; i < dp->n_addrs; ++i) {
+		addr = dp->addrs[i].address;
+		size = dp->addrs[i].size;
+		if (size >= 0x800000) {
+			/* use the big-endian aperture (??) */
+			addr += 0x800000;
+			/* map at most 8MB for the frame buffer */
+			frame_buffer = ioremap(addr, 0x800000);
+		} else {
+			disp_regs = ioremap(addr, size);
+		}
+	}
+	cmap_regs = ioremap(0xf301b000, 0x1000);	/* XXX not in prom? */
+
+	/* Work out which banks of VRAM we have installed. */
+	frame_buffer[0] = 0x5a;
+	frame_buffer[1] = 0xc7;
+	bank1 = frame_buffer[0] == 0x5a && frame_buffer[1] == 0xc7;
+	frame_buffer[0x600000] = 0xa5;
+	frame_buffer[0x600001] = 0x38;
+	bank2 = frame_buffer[0x600000] == 0xa5 && frame_buffer[0x600001] == 0x38;
+	total_vram = (bank1 + bank2) * 0x200000;
+	/* If we don't have bank 1 installed, we hope we have bank 2 :-) */
+	control_use_bank2 = !bank1;
+	if (control_use_bank2)
+		frame_buffer += 0x600000;
+
+	sense = read_control_sense();
+	if (video_mode == VMODE_NVRAM) {
+		video_mode = nvram_read_byte(NV_VMODE);
+		if (video_mode <= 0 || video_mode > VMODE_MAX
+		    || control_reg_init[video_mode-1] == 0)
+			video_mode = VMODE_CHOOSE;
+	}
+	if (video_mode == VMODE_CHOOSE)
+		video_mode = map_monitor_sense(sense);
+	if (control_reg_init[video_mode-1] == 0)
+		video_mode = VMODE_640_480_60;
+
+	/*
+	 * Reduce the pixel size if we don't have enough VRAM.
+	 */
+	if (color_mode == CMODE_NVRAM)
+		color_mode = nvram_read_byte(NV_CMODE);
+	if (color_mode < CMODE_8 || color_mode > CMODE_32)
+		color_mode = CMODE_8;
+	while (color_mode > CMODE_8
+	       && control_vram_reqd(video_mode, color_mode) > total_vram)
+		--color_mode;
+
+	printk("Monitor sense value = 0x%x, ", sense);
+}
+
+static void
+set_control_clock(unsigned char *params)
+{
+	struct cuda_request req;
+	int i;
+
+	for (i = 0; i < 3; ++i) {
+		cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC,
+			     0x50, i + 1, params[i]);
+		while (!req.got_reply)
+			cuda_poll();
+	}
+}
+
+void
+control_init()
+{
+	struct preg *rp;
+	int i, yoff, hres;
+	int ctrl, flags;
+	unsigned *p;
+	struct control_regvals *init;
+
+	if (video_mode <= 0 || video_mode > VMODE_MAX
+	    || (init = control_reg_init[video_mode-1]) == 0)
+		panic("control: display mode %d not supported", video_mode);
+	n_scanlines = vmode_attrs[video_mode-1].vres;
+	hres = vmode_attrs[video_mode-1].hres;
+	pixel_size = 1 << color_mode;
+	line_pitch = init->pitch[color_mode];
+	row_pitch = line_pitch * 16;
+
+	if (control_vram_reqd(video_mode, color_mode) > 0x200000)
+		flags = 0x51;
+	else if (control_use_bank2)
+		flags = 0x39;
+	else
+		flags = 0x31;
+	if (video_mode >= VMODE_1280_960_75 && color_mode >= CMODE_16)
+		ctrl = 0x7f;
+	else
+		ctrl = 0x3b;
+
+	/* Initialize display timing registers */
+	out_le32(&disp_regs->ctrl.r, 0x43b);
+	set_control_clock(init->clock_params);
+	cmap_regs->addr = 0x20; cmap_regs->d2 = init->radacal_ctrl[color_mode];
+	cmap_regs->addr = 0x21; cmap_regs->d2 = control_use_bank2? 0: 1;
+	cmap_regs->addr = 0x10; cmap_regs->d2 = 0;
+	cmap_regs->addr = 0x11; cmap_regs->d2 = 0;
+	rp = &disp_regs->vswin;
+	for (i = 0; i < 16; ++i, ++rp)
+		out_le32(&rp->r, init->regs[i]);
+	out_le32(&disp_regs->pitch.r, line_pitch);
+	out_le32(&disp_regs->mode.r, init->mode[color_mode]);
+	out_le32(&disp_regs->flags.r, flags);
+	out_le32(&disp_regs->start_addr.r, 0);
+	out_le32(&disp_regs->reg18.r, 0x1e5);
+	out_le32(&disp_regs->reg19.r, 0);
+
+	pmac_init_palette();	/* Initialize colormap */
+
+	/* Turn on display */
+	out_le32(&disp_regs->ctrl.r, ctrl);
+
+	yoff = (n_scanlines % 16) / 2;
+	fb_start = frame_buffer + yoff * line_pitch + init->offset[color_mode];
+
+	/* Clear screen */
+	p = (unsigned *) (frame_buffer + init->offset[color_mode]);
+	for (i = n_scanlines * line_pitch / sizeof(unsigned); i != 0; --i)
+		*p++ = 0;
+
+	display_info.height = n_scanlines;
+	display_info.width = hres;
+	display_info.depth = pixel_size * 8;
+	display_info.pitch = line_pitch;
+	display_info.mode = video_mode;
+	strncpy(display_info.name, "control", sizeof(display_info.name));
+	display_info.fb_address = (unsigned long) frame_buffer + init->offset[color_mode];
+	display_info.cmap_adr_address = (unsigned long) &cmap_regs->addr;
+	display_info.cmap_data_address = (unsigned long) &cmap_regs->lut;
+	display_info.disp_reg_address = (unsigned long) &disp_regs;
+}
+
+int
+control_setmode(struct vc_mode *mode, int doit)
+{
+	int cmode;
+
+	if (mode->mode <= 0 || mode->mode > VMODE_MAX
+	    || control_reg_init[mode->mode-1] == 0)
+		return -EINVAL;
+	switch (mode->depth) {
+	case 24:
+	case 32:
+		cmode = CMODE_32;
+		break;
+	case 16:
+		cmode = CMODE_16;
+		break;
+	case 8:
+	case 0:		/* (default) */
+		cmode = CMODE_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (control_vram_reqd(mode->mode, cmode) > total_vram)
+		return -EINVAL;
+	if (doit) {
+		video_mode = mode->mode;
+		color_mode = cmode;
+		control_init();
+	}
+	return 0;
+}
+
+void
+control_set_palette(unsigned char red[], unsigned char green[],
+		    unsigned char blue[], int index, int ncolors)
+{
+	int i;
+
+	for (i = 0; i < ncolors; ++i) {
+		cmap_regs->addr = index + i;	eieio();
+		cmap_regs->lut = red[i];	eieio();
+		cmap_regs->lut = green[i];	eieio();
+		cmap_regs->lut = blue[i];	eieio();
+	}
+}
+
+void
+control_set_blanking(int blank_mode)
+{
+	int ctrl;
+
+	ctrl = ld_le32(&disp_regs->ctrl.r) | 0x33;
+	if (blank_mode & VESA_VSYNC_SUSPEND)
+		ctrl &= ~3;
+	if (blank_mode & VESA_HSYNC_SUSPEND)
+		ctrl &= ~0x30;
+	out_le32(&disp_regs->ctrl.r, ctrl);
+}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov