patch-2.1.66 linux/drivers/char/ftape/vendors.h

Next file: linux/drivers/char/ftape/zftape/Makefile
Previous file: linux/drivers/char/ftape/tracing.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.65/linux/drivers/char/ftape/vendors.h linux/drivers/char/ftape/vendors.h
@@ -1,127 +0,0 @@
-#ifndef _VENDORS_H
-#define _VENDORS_H
-
-/*
- *      Copyright (C) 1993-1995 Bas Laarhoven.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- $Source: /home/bas/distr/ftape-2.03b/RCS/vendors.h,v $
- $Author: bas $
- *
- $Revision: 1.34 $
- $Date: 1995/05/27 08:54:21 $
- $State: Beta $
- *
- *      This file contains the supported drive types
- *      with their QIC-117 spec. vendor code and
- *      drive dependent configuration information.
- */
-
-typedef enum {
-	unknown_wake_up = 0,
-	no_wake_up,
-	wake_up_colorado,
-	wake_up_mountain,
-	wake_up_insight,
-} wake_up_types;
-
-typedef struct {
-	wake_up_types wake_up;	/* see wake_up_types */
-	char *name;		/* Text describing the drive */
-} wakeup_method;
-
-/*  Note: order of entries in WAKEUP_METHODS must be so that a variable
- *        of type wake_up_types can be used as an index in the array.
- */
-#define WAKEUP_METHODS { \
-  { unknown_wake_up,    "Unknown" }, \
-  { no_wake_up,         "None" }, \
-  { wake_up_colorado,   "Colorado" }, \
-  { wake_up_mountain,   "Mountain" }, \
-  { wake_up_insight,    "Motor-on" }, \
-}
-
-typedef struct {
-	unsigned int vendor_id;	/* vendor id from drive */
-	int speed;		/* maximum tape transport speed (ips) */
-	wake_up_types wake_up;	/* see wake_up_types */
-	char *name;		/* Text describing the drive */
-} vendor_struct;
-
-#define UNKNOWN_VENDOR (-1)
-
-#define QIC117_VENDORS { \
-/* see _vendor_struct */ \
-  { 0x00000,  82, wake_up_colorado,  "Colorado DJ-10 (old)" }, \
-  { 0x00047,  90, wake_up_colorado,  "Colorado DJ-10/DJ-20" }, \
-  { 0x011c2,  84, wake_up_colorado,  "Colorado 700" }, \
-  { 0x011c3,  90, wake_up_colorado,  "Colorado 1400" }, \
-  { 0x011c4,  84, wake_up_colorado,  "Colorado DJ-10/DJ-20 (new)" }, \
-  { 0x011c5,  84, wake_up_colorado,  "HP Colorado T1000" }, \
-  { 0x00005,  45, wake_up_mountain,  "Archive 5580i" }, \
-  { 0x10005,  50, wake_up_insight,   "Insight 80Mb, Irwin 80SX" }, \
-  { 0x00140,  74, wake_up_mountain,  "Archive S.Hornet [Identity/Escom]" }, \
-  { 0x00146,  72, wake_up_mountain,  "Archive 31250Q [Escom]" }, \
-  { 0x0014a, 100, wake_up_mountain,  "Archive XL9250i [Conner/Escom]" }, \
-  { 0x0014c,  98, wake_up_mountain,  "Conner C250MQT" }, \
-  { 0x0014e,  80, wake_up_mountain,  "Conner C250MQ" }, \
-  { 0x00150,  80, wake_up_mountain,  "Conner TSM420R/TST800R" }, \
-  { 0x00152,  80, wake_up_mountain,  "Conner TSM850R" }, \
-  { 0x00156,  80, wake_up_mountain,  "Conner TSM850R/1700R/TST3200R" }, \
-  { 0x00180,   0, wake_up_mountain,  "Summit SE 150" }, \
-  { 0x00181,  85, wake_up_mountain,  "Summit SE 250, Mountain FS8000" }, \
-  { 0x001c1,  82, no_wake_up,        "Wangtek 3040F" }, \
-  { 0x001c8,  64, no_wake_up,        "Wangtek 3080F" }, \
-  { 0x001c8,  64, wake_up_colorado,  "Wangtek 3080F" }, \
-  { 0x001ca,  67, no_wake_up,        "Wangtek 3080F (new)" }, \
-  { 0x001cc,  77, wake_up_colorado,  "Wangtek 3200 / Teac 700" }, \
-  { 0x001cd,  75, wake_up_colorado,  "Reveal TB1400" }, \
-  { 0x00380,   0, wake_up_colorado,  "Exabyte EXB-1500" }, \
-  { 0x08880,  64, no_wake_up,        "Iomega 250" }, \
-  { 0x08880,  64, wake_up_colorado,  "Iomega 250, Ditto 800" }, \
-  { 0x08880,  64, wake_up_insight,   "Iomega 250" }, \
-  { 0x08881,   0, wake_up_colorado,  "Iomega 700" }, \
-  { 0x08882,  80, wake_up_colorado,  "Iomega 3200" }, \
-  { 0x00021,  70, no_wake_up,        "AIWA CT-803" }, \
-  { 0x00021,   0, wake_up_mountain,  "COREtape QIC80" }, \
-}
-
-#define QIC117_MAKE_CODES { \
-  { 0, "Unassigned" }, \
-  { 1, "Alloy Computer Products" }, \
-  { 2, "3M" }, \
-  { 3, "Tandberg Data" }, \
-  { 4, "Colorado" }, \
-  { 5, "Archive/Conner" }, \
-  { 6, "Mountain/Summit Memory Systems" }, \
-  { 7, "Wangtek/Rexon/Tecmar" }, \
-  { 8, "Sony" }, \
-  { 9, "Cipher Data Products" }, \
-  { 10, "Irwin Magnetic Systems" }, \
-  { 11, "Braemar" }, \
-  { 12, "Verbatim" }, \
-  { 13, "Core International" }, \
-  { 14, "Exabyte" }, \
-  { 15, "Teac" }, \
-  { 16, "Gigatek" }, \
-  { 17, "ComByte" }, \
-  { 18, "PERTEC Memories" }, \
-  { 71, "Colorado" }, \
-  { 546, "Iomega Inc" }, \
-}
-
-#endif

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov