patch-2.1.70 linux/drivers/cdrom/sbpcd.h
Next file: linux/drivers/cdrom/sjcd.c
Previous file: linux/drivers/cdrom/sbpcd.c
Back to the patch index
Back to the overall index
- Lines: 859
- Date:
Tue Dec 2 11:41:45 1997
- Orig file:
v2.1.69/linux/drivers/cdrom/sbpcd.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.1.69/linux/drivers/cdrom/sbpcd.h linux/drivers/cdrom/sbpcd.h
@@ -0,0 +1,858 @@
+/*
+ * sbpcd.h Specify interface address and interface type here.
+ */
+
+/*
+ * Attention! This file contains user-serviceable parts!
+ * I recommend to make use of it...
+ * If you feel helpless, look into linux/Documentation/cdrom/sbpcd
+ * (good idea anyway, at least before mailing me).
+ *
+ * The definitions for the first controller can get overridden by
+ * the kernel command line ("lilo boot option").
+ * Examples:
+ * sbpcd=0x300,LaserMate
+ * or
+ * sbpcd=0x230,SoundBlaster
+ * or
+ * sbpcd=0x338,SoundScape
+ * or
+ * sbpcd=0x2C0,Teac16bit
+ *
+ * If sbpcd gets used as a module, you can load it with
+ * insmod sbpcd.o sbpcd=0x300,0
+ * or
+ * insmod sbpcd.o sbpcd=0x230,1
+ * or
+ * insmod sbpcd.o sbpcd=0x338,2
+ * or
+ * insmod sbpcd.o sbpcd=0x2C0,3
+ * respective to override the configured address and type.
+ */
+
+/*
+ * define your CDROM port base address as CDROM_PORT
+ * and specify the type of your interface card as SBPRO.
+ *
+ * address:
+ * ========
+ * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
+ * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...
+ * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to
+ * specify the REAL address here, not the configuration port address. Look
+ * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let
+ * sbpcd auto-probe, if you are not firm with the address.
+ * There are some soundcards on the market with 0x0630, 0x0650, ...; their
+ * type is not obvious (both types are possible).
+ *
+ * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.
+ * if your soundcard has its CDROM port above 0x300, specify
+ * that address and try SBPRO 0 first.
+ * if your SoundScape configuration port is at 0x330, specify
+ * 0x338 and SBPRO 2.
+ *
+ * interface type:
+ * ===============
+ * set SBPRO to 1 for "true" SoundBlaster card
+ * set SBPRO to 0 for "compatible" soundcards and
+ * for "poor" (no sound) interface cards.
+ * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards
+ * set SBPRO to 3 for Teac 16bit interface cards
+ *
+ * Almost all "compatible" sound boards need to set SBPRO to 0.
+ * If SBPRO is set wrong, the drives will get found - but any
+ * data access will give errors (audio access will work).
+ * The "OmniCD" no-sound interface card from CreativeLabs and most Teac
+ * interface cards need SBPRO 1.
+ *
+ * sound base:
+ * ===========
+ * The SOUND_BASE definition tells if we should try to turn the CD sound
+ * channels on. It will only be of use regarding soundcards with a SbPro
+ * compatible mixer.
+ *
+ * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
+ * #define SOUND_BASE 0 leaves the soundcard untouched
+ */
+#if !(SBPCD_ISSUE-1) /* first (or if you have only one) interface board: */
+#define CDROM_PORT 0x340 /* <-----------<< port address */
+#define SBPRO 0 /* <-----------<< interface type */
+#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
+#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */
+#endif
+#if !(SBPCD_ISSUE-2) /* ==================== second interface board: === */
+#define CDROM_PORT 0x344 /* <-----------<< port address */
+#define SBPRO 0 /* <-----------<< interface type */
+#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
+#define SOUND_BASE 0x000 /* <-----------<< sound address of this card or 0 */
+#endif
+#if !(SBPCD_ISSUE-3) /* ===================== third interface board: === */
+#define CDROM_PORT 0x630 /* <-----------<< port address */
+#define SBPRO 1 /* <-----------<< interface type */
+#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
+#define SOUND_BASE 0x240 /* <-----------<< sound address of this card or 0 */
+#endif
+#if !(SBPCD_ISSUE-4) /* ==================== fourth interface board: === */
+#define CDROM_PORT 0x634 /* <-----------<< port address */
+#define SBPRO 0 /* <-----------<< interface type */
+#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
+#define SOUND_BASE 0x000 /* <-----------<< sound address of this card or 0 */
+#endif
+
+/*
+ * some more or less user dependent definitions - service them!
+ */
+
+/* Set this to 0 once you have configured your interface definitions right. */
+#define DISTRIBUTION 1
+
+/*
+ * Time to wait after giving a message.
+ * This gets important if you enable non-standard DBG_xxx flags.
+ * You will see what happens if you omit the pause or make it
+ * too short. Be warned!
+ */
+#define KLOGD_PAUSE 1
+
+/* tray control: eject tray if no disk is in */
+#if DISTRIBUTION
+#define JUKEBOX 0
+#else
+#define JUKEBOX 1
+#endif DISTRIBUTION
+
+/* tray control: eject tray after last use */
+#if DISTRIBUTION
+#define EJECT 0
+#else
+#define EJECT 1
+#endif DISTRIBUTION
+
+/* max. number of audio frames to read with one */
+/* request (allocates n* 2352 bytes kernel memory!) */
+/* may be freely adjusted, f.e. 75 (= 1 sec.), at */
+/* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */
+#define READ_AUDIO 0
+
+/* Optimizations for the Teac CD-55A drive read performance.
+ * SBP_TEAC_SPEED can be changed here, or one can set the
+ * variable "teac" when loading as a module.
+ * Valid settings are:
+ * 0 - very slow - the recommended "DISTRIBUTION 1" setup.
+ * 1 - 2x performance with little overhead. No busy waiting.
+ * 2 - 4x performance with 5ms overhead per read. Busy wait.
+ *
+ * Setting SBP_TEAC_SPEED or the variable 'teac' to anything
+ * other than 0 may cause problems. If you run into them, first
+ * change SBP_TEAC_SPEED back to 0 and see if your drive responds
+ * normally. If yes, you are "allowed" to report your case - to help
+ * me with the driver, not to solve your hassle. Donīt mail if you
+ * simply are stuck into your own "tuning" experiments, you know?
+ */
+#define SBP_TEAC_SPEED 1
+
+/*==========================================================================*/
+/*==========================================================================*/
+/*
+ * nothing to change below here if you are not fully aware what you're doing
+ */
+#ifndef _LINUX_SBPCD_H
+
+#define _LINUX_SBPCD_H
+/*==========================================================================*/
+/*==========================================================================*/
+/*
+ * driver's own read_ahead, data mode
+ */
+#define SBP_BUFFER_FRAMES 8
+
+#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */
+#undef FUTURE
+#undef SAFE_MIXED
+
+#define TEST_UPC 0
+#define SPEA_TEST 0
+#define TEST_STI 0
+#define OLD_BUSY 0
+#undef PATH_CHECK
+#ifndef SOUND_BASE
+#define SOUND_BASE 0
+#endif
+#if DISTRIBUTION
+#undef SBP_TEAC_SPEED
+#define SBP_TEAC_SPEED 0
+#endif
+/*==========================================================================*/
+/*
+ * DDI interface definitions
+ * "invented" by Fred N. van Kempen..
+ */
+#define DDIOCSDBG 0x9000
+
+/*==========================================================================*/
+/*
+ * "private" IOCTL functions
+ */
+#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */
+
+/*==========================================================================*/
+/*
+ * Debug output levels
+ */
+#define DBG_INF 1 /* necessary information */
+#define DBG_BSZ 2 /* BLOCK_SIZE trace */
+#define DBG_REA 3 /* READ status trace */
+#define DBG_CHK 4 /* MEDIA CHECK trace */
+#define DBG_TIM 5 /* datarate timer test */
+#define DBG_INI 6 /* initialization trace */
+#define DBG_TOC 7 /* tell TocEntry values */
+#define DBG_IOC 8 /* ioctl trace */
+#define DBG_STA 9 /* ResponseStatus() trace */
+#define DBG_ERR 10 /* cc_ReadError() trace */
+#define DBG_CMD 11 /* cmd_out() trace */
+#define DBG_WRN 12 /* give explanation before auto-probing */
+#define DBG_MUL 13 /* multi session code test */
+#define DBG_IDX 14 /* test code for drive_id !=0 */
+#define DBG_IOX 15 /* some special information */
+#define DBG_DID 16 /* drive ID test */
+#define DBG_RES 17 /* drive reset info */
+#define DBG_SPI 18 /* SpinUp test */
+#define DBG_IOS 19 /* ioctl trace: subchannel functions */
+#define DBG_IO2 20 /* ioctl trace: general */
+#define DBG_UPC 21 /* show UPC information */
+#define DBG_XA1 22 /* XA mode debugging */
+#define DBG_LCK 23 /* door (un)lock info */
+#define DBG_SQ1 24 /* dump SubQ frame */
+#define DBG_AUD 25 /* READ AUDIO debugging */
+#define DBG_SEQ 26 /* Sequoia interface configuration trace */
+#define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */
+#define DBG_CD2 28 /* MKE/Funai CD200 debugging trace */
+#define DBG_TEA 29 /* TEAC CD-55A debugging trace */
+#define DBG_ECS 30 /* ECS-AT (Vertos 100) debugging trace */
+#define DBG_000 31 /* unnecessary information */
+
+/*==========================================================================*/
+/*==========================================================================*/
+
+/*
+ * bits of flags_cmd_out:
+ */
+#define f_respo3 0x100
+#define f_putcmd 0x80
+#define f_respo2 0x40
+#define f_lopsta 0x20
+#define f_getsta 0x10
+#define f_ResponseStatus 0x08
+#define f_obey_p_check 0x04
+#define f_bit1 0x02
+#define f_wait_if_busy 0x01
+
+/*
+ * diskstate_flags:
+ */
+#define x80_bit 0x80
+#define upc_bit 0x40
+#define volume_bit 0x20
+#define toc_bit 0x10
+#define multisession_bit 0x08
+#define cd_size_bit 0x04
+#define subq_bit 0x02
+#define frame_size_bit 0x01
+
+/*
+ * disk states (bits of diskstate_flags):
+ */
+#define upc_valid (D_S[d].diskstate_flags&upc_bit)
+#define volume_valid (D_S[d].diskstate_flags&volume_bit)
+#define toc_valid (D_S[d].diskstate_flags&toc_bit)
+#define cd_size_valid (D_S[d].diskstate_flags&cd_size_bit)
+#define subq_valid (D_S[d].diskstate_flags&subq_bit)
+#define frame_size_valid (D_S[d].diskstate_flags&frame_size_bit)
+
+/*
+ * the status_bits variable
+ */
+#define p_success 0x100
+#define p_door_closed 0x80
+#define p_caddy_in 0x40
+#define p_spinning 0x20
+#define p_check 0x10
+#define p_busy_new 0x08
+#define p_door_locked 0x04
+#define p_disk_ok 0x01
+
+/*
+ * LCS-7260 special status result bits:
+ */
+#define p_lcs_door_locked 0x02
+#define p_lcs_door_closed 0x01 /* probably disk_in */
+
+/*
+ * CR-52x special status result bits:
+ */
+#define p_caddin_old 0x40
+#define p_success_old 0x08
+#define p_busy_old 0x04
+#define p_bit_1 0x02 /* hopefully unused now */
+
+/*
+ * "generation specific" defs of the status result bits:
+ */
+#define p0_door_closed 0x80
+#define p0_caddy_in 0x40
+#define p0_spinning 0x20
+#define p0_check 0x10
+#define p0_success 0x08 /* unused */
+#define p0_busy 0x04
+#define p0_bit_1 0x02 /* unused */
+#define p0_disk_ok 0x01
+
+#define pL_disk_in 0x40
+#define pL_spinning 0x20
+#define pL_check 0x10
+#define pL_success 0x08 /* unused ?? */
+#define pL_busy 0x04
+#define pL_door_locked 0x02
+#define pL_door_closed 0x01
+
+#define pV_door_closed 0x40
+#define pV_spinning 0x20
+#define pV_check 0x10
+#define pV_success 0x08
+#define pV_busy 0x04
+#define pV_door_locked 0x02
+#define pV_disk_ok 0x01
+
+#define p1_door_closed 0x80
+#define p1_disk_in 0x40
+#define p1_spinning 0x20
+#define p1_check 0x10
+#define p1_busy 0x08
+#define p1_door_locked 0x04
+#define p1_bit_1 0x02 /* unused */
+#define p1_disk_ok 0x01
+
+#define p2_disk_ok 0x80
+#define p2_door_locked 0x40
+#define p2_spinning 0x20
+#define p2_busy2 0x10
+#define p2_busy1 0x08
+#define p2_door_closed 0x04
+#define p2_disk_in 0x02
+#define p2_check 0x01
+
+/*
+ * used drive states:
+ */
+#define st_door_closed (D_S[d].status_bits&p_door_closed)
+#define st_caddy_in (D_S[d].status_bits&p_caddy_in)
+#define st_spinning (D_S[d].status_bits&p_spinning)
+#define st_check (D_S[d].status_bits&p_check)
+#define st_busy (D_S[d].status_bits&p_busy_new)
+#define st_door_locked (D_S[d].status_bits&p_door_locked)
+#define st_diskok (D_S[d].status_bits&p_disk_ok)
+
+/*
+ * bits of the CDi_status register:
+ */
+#define s_not_result_ready 0x04 /* 0: "result ready" */
+#define s_not_data_ready 0x02 /* 0: "data ready" */
+#define s_attention 0x01 /* 1: "attention required" */
+/*
+ * usable as:
+ */
+#define DRV_ATTN ((inb(CDi_status)&s_attention)!=0)
+#define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0)
+#define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0)
+
+/*
+ * drive families and types (firmware versions):
+ */
+#define drv_fam0 0x0100 /* CR-52x family */
+#define drv_199 (drv_fam0+0x01) /* <200 */
+#define drv_200 (drv_fam0+0x02) /* <201 */
+#define drv_201 (drv_fam0+0x03) /* <210 */
+#define drv_210 (drv_fam0+0x04) /* <211 */
+#define drv_211 (drv_fam0+0x05) /* <300 */
+#define drv_300 (drv_fam0+0x06) /* >=300 */
+
+#define drv_fam1 0x0200 /* CR-56x family */
+#define drv_099 (drv_fam1+0x01) /* <100 */
+#define drv_100 (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */
+
+#define drv_fam2 0x0400 /* CD200 family */
+
+#define drv_famT 0x0800 /* TEAC CD-55A */
+
+#define drv_famL 0x1000 /* Longshine family */
+#define drv_260 (drv_famL+0x01) /* LCS-7260 */
+#define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */
+#define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */
+
+#define drv_famV 0x2000 /* ECS-AT (vertos-100) family */
+#define drv_at (drv_famV+0x01) /* ECS-AT, firmware "1.00" */
+
+#define fam0_drive (D_S[d].drv_type&drv_fam0)
+#define famL_drive (D_S[d].drv_type&drv_famL)
+#define famV_drive (D_S[d].drv_type&drv_famV)
+#define fam1_drive (D_S[d].drv_type&drv_fam1)
+#define fam2_drive (D_S[d].drv_type&drv_fam2)
+#define famT_drive (D_S[d].drv_type&drv_famT)
+#define fam0L_drive (D_S[d].drv_type&(drv_fam0|drv_famL))
+#define fam0V_drive (D_S[d].drv_type&(drv_fam0|drv_famV))
+#define famLV_drive (D_S[d].drv_type&(drv_famL|drv_famV))
+#define fam0LV_drive (D_S[d].drv_type&(drv_fam0|drv_famL|drv_famV))
+#define fam1L_drive (D_S[d].drv_type&(drv_fam1|drv_famL))
+#define fam1V_drive (D_S[d].drv_type&(drv_fam1|drv_famV))
+#define fam1LV_drive (D_S[d].drv_type&(drv_fam1|drv_famL|drv_famV))
+#define fam01_drive (D_S[d].drv_type&(drv_fam0|drv_fam1))
+#define fam12_drive (D_S[d].drv_type&(drv_fam1|drv_fam2))
+#define fam2T_drive (D_S[d].drv_type&(drv_fam2|drv_famT))
+
+/*
+ * audio states:
+ */
+#define audio_playing 2
+#define audio_pausing 1
+
+/*
+ * drv_pattern, drv_options:
+ */
+#define speed_auto 0x80
+#define speed_300 0x40
+#define speed_150 0x20
+#define audio_mono 0x04
+
+/*
+ * values of cmd_type (0 else):
+ */
+#define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */
+#define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */
+#define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */
+#define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */
+
+/*
+ * sense_byte:
+ *
+ * values: 00
+ * 01
+ * 81
+ * 82 "raw audio" mode
+ * xx from infobuf[0] after 85 00 00 00 00 00 00
+ */
+
+/* audio status (bin) */
+#define aud_00 0x00 /* Audio status byte not supported or not valid */
+#define audx11 0x0b /* Audio play operation in progress */
+#define audx12 0x0c /* Audio play operation paused */
+#define audx13 0x0d /* Audio play operation successfully completed */
+#define audx14 0x0e /* Audio play operation stopped due to error */
+#define audx15 0x0f /* No current audio status to return */
+/* audio status (bcd) */
+#define aud_11 0x11 /* Audio play operation in progress */
+#define aud_12 0x12 /* Audio play operation paused */
+#define aud_13 0x13 /* Audio play operation successfully completed */
+#define aud_14 0x14 /* Audio play operation stopped due to error */
+#define aud_15 0x15 /* No current audio status to return */
+
+/*
+ * highest allowed drive number (MINOR+1)
+ */
+#define NR_SBPCD 4
+
+/*
+ * we try to never disable interrupts - seems to work
+ */
+#define SBPCD_DIS_IRQ 0
+
+/*
+ * "write byte to port"
+ */
+#define OUT(x,y) outb(y,x)
+
+/*==========================================================================*/
+
+#define MIXER_addr SOUND_BASE+4 /* sound card's address register */
+#define MIXER_data SOUND_BASE+5 /* sound card's data register */
+#define MIXER_CD_Volume 0x28 /* internal SB Pro register address */
+
+/*==========================================================================*/
+
+#define MAX_TRACKS 99
+
+#define ERR_DISKCHANGE 615
+
+/*==========================================================================*/
+/*
+ * To make conversions easier (machine dependent!)
+ */
+typedef union _msf
+{
+ u_int n;
+ u_char c[4];
+} MSF;
+
+typedef union _blk
+{
+ u_int n;
+ u_char c[4];
+} BLK;
+
+/*==========================================================================*/
+
+/*============================================================================
+==============================================================================
+
+COMMAND SET of "old" drives like CR-521, CR-522
+ (the CR-562 family is different):
+
+No. Command Code
+--------------------------------------------
+
+Drive Commands:
+ 1 Seek 01
+ 2 Read Data 02
+ 3 Read XA-Data 03
+ 4 Read Header 04
+ 5 Spin Up 05
+ 6 Spin Down 06
+ 7 Diagnostic 07
+ 8 Read UPC 08
+ 9 Read ISRC 09
+10 Play Audio 0A
+11 Play Audio MSF 0B
+12 Play Audio Track/Index 0C
+
+Status Commands:
+13 Read Status 81
+14 Read Error 82
+15 Read Drive Version 83
+16 Mode Select 84
+17 Mode Sense 85
+18 Set XA Parameter 86
+19 Read XA Parameter 87
+20 Read Capacity 88
+21 Read SUB_Q 89
+22 Read Disc Code 8A
+23 Read Disc Information 8B
+24 Read TOC 8C
+25 Pause/Resume 8D
+26 Read Packet 8E
+27 Read Path Check 00
+
+
+all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
+
+mnemo 7-byte command #bytes response (r0...rn)
+________ ____________________ ____
+
+Read Status:
+status: 81. (1) one-byte command, gives the main
+ status byte
+Read Error:
+check1: 82 00 00 00 00 00 00. (6) r1: audio status
+
+Read Packet:
+check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating
+ to commands 01 04 05 07 08 09
+
+Play Audio:
+play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba),
+ nn-nn-nn: #blocks
+Play Audio MSF:
+ 0b mm-ss-ff mm-ss-ff (0) play audio from/to
+
+Play Audio Track/Index:
+ 0c ...
+
+Pause/Resume:
+pause: 8d pr 00 00 00 00 00. (0) pause (pr=00)
+ resume (pr=80) audio playing
+
+Mode Select:
+ 84 00 nn-nn ??-?? 00 (0) nn-nn: 2048 or 2340
+ possibly defines transfer size
+
+set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1)
+ le(vel): min=0, max=FF, else half
+ (firmware 2.11)
+
+Mode Sense:
+get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting
+
+Read Disc Information:
+tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format)
+
+Read TOC:
+tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn
+ (fl=0:"lba"-, =2:"msf-bin"-format)
+
+Read Capacity:
+capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity"
+
+
+Read Path Check:
+ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55
+ ("ping" if the drive is connected)
+
+Read Drive Version:
+ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn"
+ (n.nn = 2.01, 2.11., 3.00, ...)
+
+Seek:
+seek: 01 00 ll-bb-aa 00 00. (0)
+seek: 01 02 mm-ss-ff 00 00. (0)
+
+Read Data:
+read: 02 xx-xx-xx nn-nn fl. (??) read nn-nn blocks of 2048 bytes,
+ starting at block xx-xx-xx
+ fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
+
+Read XA-Data:
+read: 03 xx-xx-xx nn-nn fl. (??) read nn-nn blocks of 2340 bytes,
+ starting at block xx-xx-xx
+ fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
+
+Read SUB_Q:
+ 89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf,
+ fl=0: "lba", fl=2: "msf"
+
+Read Disc Code:
+ 8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info
+
+Read Header:
+ 04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2"
+ 04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2"
+
+Spin Up:
+ 05 00 ll-bb-aa 00 00. (0) possibly implies a "seek"
+
+Spin Down:
+ 06 ...
+
+Diagnostic:
+ 07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2"
+ 07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2"
+
+Read UPC:
+ 08 00 ll-bb-aa 00 00. (16)
+ 08 02 mm-ss-ff 00 00. (16)
+
+Read ISRC:
+ 09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2"
+ 09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2"
+
+Set XA Parameter:
+ 86 ...
+
+Read XA Parameter:
+ 87 ...
+
+==============================================================================
+============================================================================*/
+
+/*
+ * commands
+ *
+ * CR-52x: CMD0_
+ * CR-56x: CMD1_
+ * CD200: CMD2_
+ * LCS-7260: CMDL_
+ * TEAC CD-55A: CMDT_
+ * ECS-AT: CMDV_
+ */
+#define CMD1_RESET 0x0a
+#define CMD2_RESET 0x01
+#define CMDT_RESET 0xc0
+
+#define CMD1_LOCK_CTL 0x0c
+#define CMD2_LOCK_CTL 0x1e
+#define CMDT_LOCK_CTL CMD2_LOCK_CTL
+#define CMDL_LOCK_CTL 0x0e
+#define CMDV_LOCK_CTL CMDL_LOCK_CTL
+
+#define CMD1_TRAY_CTL 0x07
+#define CMD2_TRAY_CTL 0x1b
+#define CMDT_TRAY_CTL CMD2_TRAY_CTL
+#define CMDL_TRAY_CTL 0x0d
+#define CMDV_TRAY_CTL CMDL_TRAY_CTL
+
+#define CMD1_MULTISESS 0x8d
+#define CMDL_MULTISESS 0x8c
+#define CMDV_MULTISESS CMDL_MULTISESS
+
+#define CMD1_SUBCHANINF 0x11
+#define CMD2_SUBCHANINF 0x??
+
+#define CMD1_ABORT 0x08
+#define CMD2_ABORT 0x08
+#define CMDT_ABORT 0x08
+
+#define CMD2_x02 0x02
+
+#define CMD2_SETSPEED 0xda
+
+#define CMD0_PATH_CHECK 0x00
+#define CMD1_PATH_CHECK 0x???
+#define CMD2_PATH_CHECK 0x???
+#define CMDT_PATH_CHECK 0x???
+#define CMDL_PATH_CHECK CMD0_PATH_CHECK
+#define CMDV_PATH_CHECK CMD0_PATH_CHECK
+
+#define CMD0_SEEK 0x01
+#define CMD1_SEEK CMD0_SEEK
+#define CMD2_SEEK 0x2b
+#define CMDT_SEEK CMD2_SEEK
+#define CMDL_SEEK CMD0_SEEK
+#define CMDV_SEEK CMD0_SEEK
+
+#define CMD0_READ 0x02
+#define CMD1_READ 0x10
+#define CMD2_READ 0x28
+#define CMDT_READ CMD2_READ
+#define CMDL_READ CMD0_READ
+#define CMDV_READ CMD0_READ
+
+#define CMD0_READ_XA 0x03
+#define CMD2_READ_XA 0xd4
+#define CMD2_READ_XA2 0xd5
+#define CMDL_READ_XA CMD0_READ_XA /* really ?? */
+#define CMDV_READ_XA CMD0_READ_XA
+
+#define CMD0_READ_HEAD 0x04
+
+#define CMD0_SPINUP 0x05
+#define CMD1_SPINUP 0x02
+#define CMD2_SPINUP CMD2_TRAY_CTL
+#define CMDL_SPINUP CMD0_SPINUP
+#define CMDV_SPINUP CMD0_SPINUP
+
+#define CMD0_SPINDOWN 0x06 /* really??? */
+#define CMD1_SPINDOWN 0x06
+#define CMD2_SPINDOWN CMD2_TRAY_CTL
+#define CMDL_SPINDOWN 0x0d
+#define CMDV_SPINDOWN CMD0_SPINDOWN
+
+#define CMD0_DIAG 0x07
+
+#define CMD0_READ_UPC 0x08
+#define CMD1_READ_UPC 0x88
+#define CMD2_READ_UPC 0x???
+#define CMDL_READ_UPC CMD0_READ_UPC
+#define CMDV_READ_UPC 0x8f
+
+#define CMD0_READ_ISRC 0x09
+
+#define CMD0_PLAY 0x0a
+#define CMD1_PLAY 0x???
+#define CMD2_PLAY 0x???
+#define CMDL_PLAY CMD0_PLAY
+#define CMDV_PLAY CMD0_PLAY
+
+#define CMD0_PLAY_MSF 0x0b
+#define CMD1_PLAY_MSF 0x0e
+#define CMD2_PLAY_MSF 0x47
+#define CMDT_PLAY_MSF CMD2_PLAY_MSF
+#define CMDL_PLAY_MSF 0x???
+
+#define CMD0_PLAY_TI 0x0c
+#define CMD1_PLAY_TI 0x0f
+
+#define CMD0_STATUS 0x81
+#define CMD1_STATUS 0x05
+#define CMD2_STATUS 0x00
+#define CMDT_STATUS CMD2_STATUS
+#define CMDL_STATUS CMD0_STATUS
+#define CMDV_STATUS CMD0_STATUS
+#define CMD2_SEEK_LEADIN 0x00
+
+#define CMD0_READ_ERR 0x82
+#define CMD1_READ_ERR CMD0_READ_ERR
+#define CMD2_READ_ERR 0x03
+#define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */
+#define CMDL_READ_ERR CMD0_READ_ERR
+#define CMDV_READ_ERR CMD0_READ_ERR
+
+#define CMD0_READ_VER 0x83
+#define CMD1_READ_VER CMD0_READ_VER
+#define CMD2_READ_VER 0x12
+#define CMDT_READ_VER CMD2_READ_VER /* really ?? */
+#define CMDL_READ_VER CMD0_READ_VER
+#define CMDV_READ_VER CMD0_READ_VER
+
+#define CMD0_SETMODE 0x84
+#define CMD1_SETMODE 0x09
+#define CMD2_SETMODE 0x55
+#define CMDT_SETMODE CMD2_SETMODE
+#define CMDL_SETMODE CMD0_SETMODE
+
+#define CMD0_GETMODE 0x85
+#define CMD1_GETMODE 0x84
+#define CMD2_GETMODE 0x5a
+#define CMDT_GETMODE CMD2_GETMODE
+#define CMDL_GETMODE CMD0_GETMODE
+
+#define CMD0_SET_XA 0x86
+
+#define CMD0_GET_XA 0x87
+
+#define CMD0_CAPACITY 0x88
+#define CMD1_CAPACITY 0x85
+#define CMD2_CAPACITY 0x25
+#define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */
+
+#define CMD0_READSUBQ 0x89
+#define CMD1_READSUBQ 0x87
+#define CMD2_READSUBQ 0x42
+#define CMDT_READSUBQ CMD2_READSUBQ
+#define CMDL_READSUBQ CMD0_READSUBQ
+#define CMDV_READSUBQ CMD0_READSUBQ
+
+#define CMD0_DISKCODE 0x8a
+
+#define CMD0_DISKINFO 0x8b
+#define CMD1_DISKINFO CMD0_DISKINFO
+#define CMD2_DISKINFO 0x43
+#define CMDT_DISKINFO CMD2_DISKINFO
+#define CMDL_DISKINFO CMD0_DISKINFO
+#define CMDV_DISKINFO CMD0_DISKINFO
+
+#define CMD0_READTOC 0x8c
+#define CMD1_READTOC CMD0_READTOC
+#define CMD2_READTOC 0x???
+#define CMDL_READTOC CMD0_READTOC
+#define CMDV_READTOC CMD0_READTOC
+
+#define CMD0_PAU_RES 0x8d
+#define CMD1_PAU_RES 0x0d
+#define CMD2_PAU_RES 0x4b
+#define CMDT_PAUSE CMD2_PAU_RES
+#define CMDL_PAU_RES CMD0_PAU_RES
+#define CMDV_PAUSE CMD0_PAU_RES
+
+#define CMD0_PACKET 0x8e
+#define CMD1_PACKET CMD0_PACKET
+#define CMD2_PACKET 0x???
+#define CMDL_PACKET CMD0_PACKET
+#define CMDV_PACKET 0x???
+
+/*==========================================================================*/
+/*==========================================================================*/
+#endif _LINUX_SBPCD_H
+/*==========================================================================*/
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only. This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 8
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -8
+ * c-argdecl-indent: 8
+ * c-label-offset: -8
+ * c-continued-statement-offset: 8
+ * c-continued-brace-offset: 0
+ * End:
+ */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov