patch-2.1.88 linux/drivers/acorn/net/ether3.h
Next file: linux/drivers/acorn/net/etherh.c
Previous file: linux/drivers/acorn/net/ether3.c
Back to the patch index
Back to the overall index
- Lines: 170
- Date:
Mon Feb 16 15:49:48 1998
- Orig file:
v2.1.87/linux/drivers/acorn/net/ether3.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.1.87/linux/drivers/acorn/net/ether3.h linux/drivers/acorn/net/ether3.h
@@ -0,0 +1,169 @@
+/*
+ * linux/drivers/net/ether3.h
+ *
+ * network driver for Acorn/ANT Ether3 cards
+ */
+
+#ifndef _LINUX_ether3_H
+#define _LINUX_ether3_H
+
+/* use 0 for production, 1 for verification, >2 for debug. debug flags: */
+#define DEBUG_TX 2
+#define DEBUG_RX 4
+#define DEBUG_INT 8
+#define DEBUG_IC 16
+#ifndef NET_DEBUG
+#define NET_DEBUG 0
+#endif
+
+/* Command register definitions & bits */
+#define REG_COMMAND (dev->base_addr + 0x00)
+#define CMD_ENINTDMA 0x0001
+#define CMD_ENINTRX 0x0002
+#define CMD_ENINTTX 0x0004
+#define CMD_ENINTBUFWIN 0x0008
+#define CMD_ACKINTDMA 0x0010
+#define CMD_ACKINTRX 0x0020
+#define CMD_ACKINTTX 0x0040
+#define CMD_ACKINTBUFWIN 0x0080
+#define CMD_DMAON 0x0100
+#define CMD_RXON 0x0200
+#define CMD_TXON 0x0400
+#define CMD_DMAOFF 0x0800
+#define CMD_RXOFF 0x1000
+#define CMD_TXOFF 0x2000
+#define CMD_FIFOREAD 0x4000
+#define CMD_FIFOWRITE 0x8000
+
+/* status register */
+#define REG_STATUS (dev->base_addr + 0x00)
+#define STAT_ENINTSTAT 0x0001
+#define STAT_ENINTRX 0x0002
+#define STAT_ENINTTX 0x0004
+#define STAT_ENINTBUFWIN 0x0008
+#define STAT_INTDMA 0x0010
+#define STAT_INTRX 0x0020
+#define STAT_INTTX 0x0040
+#define STAT_INTBUFWIN 0x0080
+#define STAT_DMAON 0x0100
+#define STAT_RXON 0x0200
+#define STAT_TXON 0x0400
+#define STAT_FIFOFULL 0x2000
+#define STAT_FIFOEMPTY 0x4000
+#define STAT_FIFODIR 0x8000
+
+/* configuration register 1 */
+#define REG_CONFIG1 (dev->base_addr + 0x10)
+#define CFG1_BUFSELSTAT0 0x0000
+#define CFG1_BUFSELSTAT1 0x0001
+#define CFG1_BUFSELSTAT2 0x0002
+#define CFG1_BUFSELSTAT3 0x0003
+#define CFG1_BUFSELSTAT4 0x0004
+#define CFG1_BUFSELSTAT5 0x0005
+#define CFG1_ADDRPROM 0x0006
+#define CFG1_TRANSEND 0x0007
+#define CFG1_LOCBUFMEM 0x0008
+#define CFG1_INTVECTOR 0x0009
+#define CFG1_DMABURSTCONT 0x0000
+#define CFG1_DMABURST800NS 0x0010
+#define CFG1_DMABURST1600NS 0x0020
+#define CFG1_DMABURST3200NS 0x0030
+#define CFG1_DMABURST1 0x0000
+#define CFG1_DMABURST4 0x0040
+#define CFG1_DMABURST8 0x0080
+#define CFG1_DMABURST16 0x00C0
+#define CFG1_RECVCOMPSTAT0 0x0100
+#define CFG1_RECVCOMPSTAT1 0x0200
+#define CFG1_RECVCOMPSTAT2 0x0400
+#define CFG1_RECVCOMPSTAT3 0x0800
+#define CFG1_RECVCOMPSTAT4 0x1000
+#define CFG1_RECVCOMPSTAT5 0x2000
+#define CFG1_RECVSPECONLY 0x0000
+#define CFG1_RECVSPECBROAD 0x4000
+#define CFG1_RECVSPECBRMULTI 0x8000
+#define CFG1_RECVPROMISC 0xC000
+
+/* configuration register 2 */
+#define REG_CONFIG2 (dev->base_addr + 0x20)
+#define CFG2_BYTESWAP 0x0001
+#define CFG2_ERRENCRC 0x0008
+#define CFG2_ERRENDRIBBLE 0x0010
+#define CFG2_ERRSHORTFRAME 0x0020
+#define CFG2_SLOTSELECT 0x0040
+#define CFG2_PREAMSELECT 0x0080
+#define CFG2_ADDRLENGTH 0x0100
+#define CFG2_RECVCRC 0x0200
+#define CFG2_XMITNOCRC 0x0400
+#define CFG2_LOOPBACK 0x0800
+#define CFG2_CTRLO 0x1000
+#define CFG2_RESET 0x8000
+
+#define REG_RECVEND (dev->base_addr + 0x30)
+
+#define REG_BUFWIN (dev->base_addr + 0x40)
+
+#define REG_RECVPTR (dev->base_addr + 0x50)
+
+#define REG_TRANSMITPTR (dev->base_addr + 0x60)
+
+#define REG_DMAADDR (dev->base_addr + 0x70)
+
+/*
+ * Cards transmit/receive headers
+ */
+#define TX_NEXT (0xffff)
+#define TXHDR_ENBABBLEINT (1 << 16)
+#define TXHDR_ENCOLLISIONINT (1 << 17)
+#define TXHDR_EN16COLLISION (1 << 18)
+#define TXHDR_ENSUCCESS (1 << 19)
+#define TXHDR_DATAFOLLOWS (1 << 21)
+#define TXHDR_CHAINCONTINUE (1 << 22)
+#define TXHDR_TRANSMIT (1 << 23)
+#define TXSTAT_BABBLED (1 << 24)
+#define TXSTAT_COLLISION (1 << 25)
+#define TXSTAT_16COLLISIONS (1 << 26)
+#define TXSTAT_DONE (1 << 31)
+
+#define RX_NEXT (0xffff)
+#define RXHDR_CHAINCONTINUE (1 << 6)
+#define RXHDR_RECEIVE (1 << 7)
+#define RXSTAT_OVERSIZE (1 << 8)
+#define RXSTAT_CRCERROR (1 << 9)
+#define RXSTAT_DRIBBLEERROR (1 << 10)
+#define RXSTAT_SHORTPACKET (1 << 11)
+#define RXSTAT_DONE (1 << 15)
+
+
+#define TX_END 0x6000
+#define RX_START 0x6000
+#define RX_LEN 0xA000
+#define RX_END 0x10000
+/* must be a power of 2 and greater than MAX_TX_BUFFERED */
+#define MAX_TXED 16
+#define MAX_TX_BUFFERED 10
+
+struct dev_priv {
+ struct {
+ unsigned int command;
+ unsigned int config1;
+ unsigned int config2;
+ } regs;
+ unsigned int tx_head; /* address to insert next packet */
+ unsigned int tx_tail; /* address of transmitting packet */
+ unsigned int tx_used; /* number of 'slots' used */
+ unsigned int rx_head; /* address to fetch next packet from */
+ struct enet_statistics stats;
+ struct timer_list timer;
+ int broken; /* 0 = ok, 1 = something went wrong */
+};
+
+extern int ether3_probe (struct device *dev);
+static int ether3_probe1 (struct device *dev);
+static int ether3_open (struct device *dev);
+static int ether3_sendpacket (struct sk_buff *skb, struct device *dev);
+static void ether3_interrupt (int irq, void *dev_id, struct pt_regs *regs);
+static int ether3_close (struct device *dev);
+static struct enet_statistics *ether3_getstats (struct device *dev);
+static void ether3_setmulticastlist (struct device *dev);
+
+#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov