patch-2.4.13 linux/drivers/char/random.c

• Lines: 436
• Date: Sun Oct 21 10:19:36 2001
• Orig file: v2.4.12/linux/drivers/char/random.c
• Orig date: Sun Sep 23 11:40:57 2001

diff -u --recursive --new-file v2.4.12/linux/drivers/char/random.c linux/drivers/char/random.c
@@ -164,25 +164,32 @@
  * sequence: 
  *
  *	echo "Initializing random number generator..."
- * 	random_seed=/var/run/random-seed
+ *	random_seed=/var/run/random-seed
  *	# Carry a random seed from start-up to start-up
- *	# Load and then save 512 bytes, which is the size of the entropy pool
- * 	if [ -f $random_seed ]; then
+ *	# Load and then save the whole entropy pool
+ *	if [ -f $random_seed ]; then
  *		cat $random_seed >/dev/urandom
- * 	fi
- *	dd if=/dev/urandom of=$random_seed count=1
- * 	chmod 600 $random_seed
+ *	else
+ *		touch $random_seed
+ *	fi
+ *	chmod 600 $random_seed
+ *	poolfile=/proc/sys/kernel/random/poolsize
+ *	[ -r $poolfile ] && bytes=`cat $poolfile` || bytes=512
+ *	dd if=/dev/urandom of=$random_seed count=1 bs=bytes
  *
  * and the following lines in an appropriate script which is run as
  * the system is shutdown:
- * 
+ *
  *	# Carry a random seed from shut-down to start-up
- *	# Save 512 bytes, which is the size of the entropy pool
+ *	# Save the whole entropy pool
  *	echo "Saving random seed..."
- * 	random_seed=/var/run/random-seed
- *	dd if=/dev/urandom of=$random_seed count=1
- * 	chmod 600 $random_seed
- * 
+ *	random_seed=/var/run/random-seed
+ *	touch $random_seed
+ *	chmod 600 $random_seed
+ *	poolfile=/proc/sys/kernel/random/poolsize
+ *	[ -r $poolfile ] && bytes=`cat $poolfile` || bytes=512
+ *	dd if=/dev/urandom of=$random_seed count=1 bs=bytes
+ *
  * For example, on most modern systems using the System V init
  * scripts, such code fragments would be found in
  * /etc/rc.d/init.d/random.  On older Linux systems, the correct script
@@ -272,8 +279,8 @@
 static int random_write_wakeup_thresh = 128;
 
 /*
- * A pool of size POOLWORDS is stirred with a primitive polynomial
- * of degree POOLWORDS over GF(2).  The taps for various sizes are
+ * A pool of size .poolwords is stirred with a primitive polynomial
+ * of degree .poolwords over GF(2).  The taps for various sizes are
  * defined below.  They are chosen to be evenly spaced (minimum RMS
  * distance from evenly spaced; the numbers in the comments are a
  * scaled squared error sum) except for the last tap, which is 1 to
@@ -284,19 +291,17 @@
 	int	tap1, tap2, tap3, tap4, tap5;
 } poolinfo_table[] = {
 	/* x^2048 + x^1638 + x^1231 + x^819 + x^411 + x + 1  -- 115 */
-	{ 2048,	1638,	1231,	819, 	411,	1 },
+	{ 2048,	1638,	1231,	819,	411,	1 },
 
 	/* x^1024 + x^817 + x^615 + x^412 + x^204 + x + 1 -- 290 */
-	{ 1024,	817, 	615,	412,	204,	1 },
-
+	{ 1024,	817,	615,	412,	204,	1 },
 #if 0				/* Alternate polynomial */
 	/* x^1024 + x^819 + x^616 + x^410 + x^207 + x^2 + 1 -- 115 */
 	{ 1024,	819,	616,	410,	207,	2 },
 #endif
-	
+
 	/* x^512 + x^411 + x^308 + x^208 + x^104 + x + 1 -- 225 */
 	{ 512,	411,	308,	208,	104,	1 },
-
 #if 0				/* Alternates */
 	/* x^512 + x^409 + x^307 + x^206 + x^102 + x^2 + 1 -- 95 */
 	{ 512,	409,	307,	206,	102,	2 },
@@ -306,10 +311,9 @@
 
 	/* x^256 + x^205 + x^155 + x^101 + x^52 + x + 1 -- 125 */
 	{ 256,	205,	155,	101,	52,	1 },
-	
+
 	/* x^128 + x^103 + x^76 + x^51 +x^25 + x + 1 -- 105 */
 	{ 128,	103,	76,	51,	25,	1 },
-
 #if 0	/* Alternate polynomial */
 	/* x^128 + x^103 + x^78 + x^51 + x^27 + x^2 + 1 -- 70 */
 	{ 128,	103,	78,	51,	27,	2 },
@@ -321,9 +325,12 @@
 	/* x^32 + x^26 + x^20 + x^14 + x^7 + x + 1 -- 15 */
 	{ 32,	26,	20,	14,	7,	1 },
 
-	{ 0, 	0,	0,	0,	0,	0 },
-};		
-	
+	{ 0,	0,	0,	0,	0,	0 },
+};
+
+#define POOLBITS	poolwords*32
+#define POOLBYTES	poolwords*4
+
 /*
  * For the purposes of better mixing, we use the CRC-32 polynomial as
  * well to make a twisted Generalized Feedback Shift Reigster
@@ -461,6 +468,12 @@
 }
 #endif
 
+#if 0
+#define DEBUG_ENT(fmt, arg...) printk(KERN_DEBUG "random: " fmt, ## arg)
+#else
+#define DEBUG_ENT(fmt, arg...) do {} while (0)
+#endif
+
 /**********************************************************************
  *
  * OS independent entropy store.   Here are the functions which handle
@@ -480,7 +493,7 @@
 /*
  * Initialize the entropy store.  The input argument is the size of
  * the random pool.
- * 
+ *
  * Returns an negative error if there is a problem.
  */
 static int create_entropy_store(int size, struct entropy_store **ret_bucket)
@@ -507,12 +520,12 @@
 	memset (r, 0, sizeof(struct entropy_store));
 	r->poolinfo = *p;
 
-	r->pool = kmalloc(poolwords*4, GFP_KERNEL);
+	r->pool = kmalloc(POOLBYTES, GFP_KERNEL);
 	if (!r->pool) {
 		kfree(r);
 		return -ENOMEM;
 	}
-	memset(r->pool, 0, poolwords*4);
+	memset(r->pool, 0, POOLBYTES);
 	*ret_bucket = r;
 	return 0;
 }
@@ -524,7 +537,7 @@
 	r->entropy_count = 0;
 	r->input_rotate = 0;
 	r->extract_count = 0;
-	memset(r->pool, 0, r->poolinfo.poolwords*4);
+	memset(r->pool, 0, r->poolinfo.POOLBYTES);
 }
 
 static void free_entropy_store(struct entropy_store *r)
@@ -545,18 +558,19 @@
  * the entropy is concentrated in the low-order bits.
  */
 static void add_entropy_words(struct entropy_store *r, const __u32 *in,
-			     int num)
+			      int nwords)
 {
 	static __u32 const twist_table[8] = {
 		         0, 0x3b6e20c8, 0x76dc4190, 0x4db26158,
 		0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278 };
 	unsigned i;
 	int new_rotate;
+	int wordmask = r->poolinfo.poolwords - 1;
 	__u32 w;
 
-	while (num--) {
+	while (nwords--) {
 		w = rotate_left(r->input_rotate, *in);
-		i = r->add_ptr = (r->add_ptr - 1) & (r->poolinfo.poolwords-1);
+		i = r->add_ptr = (r->add_ptr - 1) & wordmask;
 		/*
 		 * Normally, we add 7 bits of rotation to the pool.
 		 * At the beginning of the pool, add an extra 7 bits
@@ -569,11 +583,11 @@
 		r->input_rotate = new_rotate & 31;
 
 		/* XOR in the various taps */
-		w ^= r->pool[(i+r->poolinfo.tap1)&(r->poolinfo.poolwords-1)];
-		w ^= r->pool[(i+r->poolinfo.tap2)&(r->poolinfo.poolwords-1)];
-		w ^= r->pool[(i+r->poolinfo.tap3)&(r->poolinfo.poolwords-1)];
-		w ^= r->pool[(i+r->poolinfo.tap4)&(r->poolinfo.poolwords-1)];
-		w ^= r->pool[(i+r->poolinfo.tap5)&(r->poolinfo.poolwords-1)];
+		w ^= r->pool[(i + r->poolinfo.tap1) & wordmask];
+		w ^= r->pool[(i + r->poolinfo.tap2) & wordmask];
+		w ^= r->pool[(i + r->poolinfo.tap3) & wordmask];
+		w ^= r->pool[(i + r->poolinfo.tap4) & wordmask];
+		w ^= r->pool[(i + r->poolinfo.tap5) & wordmask];
 		w ^= r->pool[i];
 		r->pool[i] = (w >> 3) ^ twist_table[w & 7];
 	}
@@ -582,16 +596,22 @@
 /*
  * Credit (or debit) the entropy store with n bits of entropy
  */
-static void credit_entropy_store(struct entropy_store *r, int num)
+static void credit_entropy_store(struct entropy_store *r, int nbits)
 {
-	int	max_entropy = r->poolinfo.poolwords*32;
-
-	if (r->entropy_count + num < 0)
+	if (r->entropy_count + nbits < 0) {
+		DEBUG_ENT("negative entropy/overflow (%d+%d)\n",
+			  r->entropy_count, nbits);
 		r->entropy_count = 0;
-	else if (r->entropy_count + num > max_entropy)
-		r->entropy_count = max_entropy;
-	else
-		r->entropy_count = r->entropy_count + num;
+	} else if (r->entropy_count + nbits > r->poolinfo.POOLBITS) {
+		r->entropy_count = r->poolinfo.POOLBITS;
+	} else {
+		r->entropy_count += nbits;
+		if (nbits)
+			DEBUG_ENT("%s added %d bits, now %d\n",
+				  r == sec_random_state ? "secondary" :
+				  r == random_state ? "primary" : "unknown",
+				  nbits, r->entropy_count);
+	}
 }
 
 /**********************************************************************
@@ -627,6 +647,12 @@
 	return 0;
 }
 
+/*
+ * Changes to the entropy data is put into a queue rather than being added to
+ * the entropy counts directly.  This is presumably to avoid doing heavy
+ * hashing calculations during an interrupt in add_timer_randomness().
+ * Instead, the entropy is only added to the pool once per timer tick.
+ */
 void batch_entropy_store(u32 a, u32 b, int num)
 {
 	int	new;
@@ -643,32 +669,35 @@
 		queue_task(&batch_tqueue, &tq_timer);
 		batch_head = new;
 	} else {
-#if 0
-		printk(KERN_NOTICE "random: batch entropy buffer full\n");
-#endif
+		DEBUG_ENT("batch entropy buffer full\n");
 	}
 }
 
+/*
+ * Flush out the accumulated entropy operations, adding entropy to the passed
+ * store (normally random_state).  If that store has enough entropy, alternate
+ * between randomizing the data of the primary and secondary stores.
+ */
 static void batch_entropy_process(void *private_)
 {
-	int	num = 0;
-	int	max_entropy;
 	struct entropy_store *r	= (struct entropy_store *) private_, *p;
-	
+	int max_entropy = r->poolinfo.POOLBITS;
+
 	if (!batch_max)
 		return;
 
-	max_entropy = r->poolinfo.poolwords*32;
+	p = r;
 	while (batch_head != batch_tail) {
+		if (r->entropy_count >= max_entropy) {
+			r = (r == sec_random_state) ?	random_state :
+							sec_random_state;
+			max_entropy = r->poolinfo.POOLBITS;
+		}
 		add_entropy_words(r, batch_entropy_pool + 2*batch_tail, 2);
-		p = r;
-		if (r->entropy_count > max_entropy && (num & 1))
-			r = sec_random_state;
 		credit_entropy_store(r, batch_entropy_credit[batch_tail]);
 		batch_tail = (batch_tail+1) & (batch_max-1);
-		num++;
 	}
-	if (r->entropy_count >= random_read_wakeup_thresh)
+	if (p->entropy_count >= random_read_wakeup_thresh)
 		wake_up_interruptible(&random_read_wait);
 }
 
@@ -1204,9 +1233,9 @@
 
 /*
  * This utility inline function is responsible for transfering entropy
- * from the primary pool to the secondary extraction pool.  We pull 
- * randomness under two conditions; one is if there isn't enough entropy 
- * in the secondary pool.  The other is after we have extract 1024 bytes,
+ * from the primary pool to the secondary extraction pool.  We pull
+ * randomness under two conditions; one is if there isn't enough entropy
+ * in the secondary pool.  The other is after we have extracted 1024 bytes,
  * at which point we do a "catastrophic reseeding".
  */
 static inline void xfer_secondary_pool(struct entropy_store *r,
@@ -1214,14 +1243,26 @@
 {
 	__u32	tmp[TMP_BUF_SIZE];
 
-	if (r->entropy_count < nbytes*8) {
-		extract_entropy(random_state, tmp, sizeof(tmp), 0);
-		add_entropy_words(r, tmp, TMP_BUF_SIZE);
-		credit_entropy_store(r, TMP_BUF_SIZE*8);
+	if (r->entropy_count < nbytes * 8 &&
+	    r->entropy_count < r->poolinfo.POOLBITS) {
+		int nwords = min(r->poolinfo.poolwords - r->entropy_count/32,
+				 sizeof(tmp) / 4);
+
+		DEBUG_ENT("xfer %d from primary to %s (have %d, need %d)\n",
+			  nwords * 32,
+			  r == sec_random_state ? "secondary" : "unknown",
+			  r->entropy_count, nbytes * 8);
+
+		extract_entropy(random_state, tmp, nwords, 0);
+		add_entropy_words(r, tmp, nwords);
+		credit_entropy_store(r, nwords * 32);
 	}
 	if (r->extract_count > 1024) {
+		DEBUG_ENT("reseeding %s with %d from primary\n",
+			  r == sec_random_state ? "secondary" : "unknown",
+			  sizeof(tmp) * 8);
 		extract_entropy(random_state, tmp, sizeof(tmp), 0);
-		add_entropy_words(r, tmp, TMP_BUF_SIZE);
+		add_entropy_words(r, tmp, sizeof(tmp) / 4);
 		r->extract_count = 0;
 	}
 }
@@ -1232,9 +1273,12 @@
  * bits of entropy are left in the pool, but it does not restrict the
  * number of bytes that are actually obtained.  If the EXTRACT_ENTROPY_USER
  * flag is given, then the buf pointer is assumed to be in user space.
- * If the EXTRACT_ENTROPY_SECONDARY flag is given, then this function will 
  *
- * Note: extract_entropy() assumes that POOLWORDS is a multiple of 16 words.
+ * If the EXTRACT_ENTROPY_SECONDARY flag is given, then we are actually
+ * extracting entropy from the secondary pool, and can refill from the
+ * primary pool if needed.
+ *
+ * Note: extract_entropy() assumes that .poolwords is a multiple of 16 words.
  */
 static ssize_t extract_entropy(struct entropy_store *r, void * buf,
 			       size_t nbytes, int flags)
@@ -1244,14 +1288,19 @@
 	__u32 x;
 
 	add_timer_randomness(&extract_timer_state, nbytes);
-	
+
 	/* Redundant, but just in case... */
-	if (r->entropy_count > r->poolinfo.poolwords) 
-		r->entropy_count = r->poolinfo.poolwords;
+	if (r->entropy_count > r->poolinfo.POOLBITS)
+		r->entropy_count = r->poolinfo.POOLBITS;
 
 	if (flags & EXTRACT_ENTROPY_SECONDARY)
 		xfer_secondary_pool(r, nbytes);
 
+	DEBUG_ENT("%s has %d bits, want %d bits\n",
+		  r == sec_random_state ? "secondary" :
+		  r == random_state ? "primary" : "unknown",
+		  r->entropy_count, nbytes * 8);
+
 	if (r->entropy_count / 8 >= nbytes)
 		r->entropy_count -= nbytes*8;
 	else
@@ -1547,9 +1596,7 @@
 		c -= bytes;
 		p += bytes;
 
-		/* Convert bytes to words */
-		bytes = (bytes + 3) / sizeof(__u32);
-		add_entropy_words(random_state, buf, bytes);
+		add_entropy_words(random_state, buf, (bytes + 3) / 4);
 	}
 	if (p == buffer) {
 		return (ssize_t)ret;
@@ -1599,7 +1646,7 @@
 			return -EINVAL;
 		if (size > random_state->poolinfo.poolwords)
 			size = random_state->poolinfo.poolwords;
-		if (copy_to_user(p, random_state->pool, size*sizeof(__u32)))
+		if (copy_to_user(p, random_state->pool, size * 4))
 			return -EFAULT;
 		return 0;
 	case RNDADDENTROPY:
@@ -1716,11 +1763,11 @@
 {
 	int	ret;
 
-	sysctl_poolsize = random_state->poolinfo.poolwords * 4;
+	sysctl_poolsize = random_state->poolinfo.POOLBYTES;
 
 	ret = proc_dointvec(table, write, filp, buffer, lenp);
 	if (ret || !write ||
-	    (sysctl_poolsize == random_state->poolinfo.poolwords * 4))
+	    (sysctl_poolsize == random_state->poolinfo.POOLBYTES))
 		return ret;
 
 	return change_poolsize(sysctl_poolsize);
@@ -1732,7 +1779,7 @@
 {
 	int	len;
 	
-	sysctl_poolsize = random_state->poolinfo.poolwords * 4;
+	sysctl_poolsize = random_state->poolinfo.POOLBYTES;
 
 	/*
 	 * We only handle the write case, since the read case gets
@@ -1747,7 +1794,7 @@
 			return -EFAULT;
 	}
 
-	if (sysctl_poolsize != random_state->poolinfo.poolwords * 4)
+	if (sysctl_poolsize != random_state->poolinfo.POOLBYTES)
 		return change_poolsize(sysctl_poolsize);
 
 	return 0;
@@ -1846,8 +1893,7 @@
 {
 	min_read_thresh = 8;
 	min_write_thresh = 0;
-	max_read_thresh = max_write_thresh =
-		random_state->poolinfo.poolwords * 32;
+	max_read_thresh = max_write_thresh = random_state->poolinfo.POOLBITS;
 	random_table[1].data = &random_state->entropy_count;
 }
 #endif 	/* CONFIG_SYSCTL */
@@ -2239,4 +2285,5 @@
 EXPORT_SYMBOL(add_interrupt_randomness);
 EXPORT_SYMBOL(add_blkdev_randomness);
 EXPORT_SYMBOL(batch_entropy_store);
+EXPORT_SYMBOL(generate_random_uuid);