patch-2.4.13 linux/include/asm-arm/arch-sa1100/graphicsmaster.h

• Lines: 67
• Date: Thu Oct 11 09:04:57 2001
• Orig file: v2.4.12/linux/include/asm-arm/arch-sa1100/graphicsmaster.h
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.12/linux/include/asm-arm/arch-sa1100/graphicsmaster.h linux/include/asm-arm/arch-sa1100/graphicsmaster.h
@@ -0,0 +1,66 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/graphicsmaster.h
+ *
+ * Created 2000/12/18 by Woojung Huh <whuh@applieddata.net>
+ *
+ * This file comes from graphicsclient.h of Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for the
+ * ADS GraphicsMaster
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <asm/hardware.h> instead"
+#endif
+
+#define ADS_CPLD_BASE		(0x10000000)
+#define ADS_p2v( x )		((x) - ADS_CPLD_BASE + 0xf0000000)
+#define ADS_v2p( x )		((x) - 0xf0000000 + ADS_CPLD_BASE)
+
+
+#define _ADS_SW_SWITCHES	0x10060000	/* Software Switches */
+
+/* Extra IRQ Controller */
+#define _ADS_INT_ST1		0x10080000	/* IRQ Status #1 */
+#define _ADS_INT_ST2		0x10080004	/* IRQ Status #2 */
+#define _ADS_INT_EN1		0x10080008	/* IRQ Enable #1 */
+#define _ADS_INT_EN2		0x1008000c	/* IRQ Enable #2 */
+#define _ADS_DCR			0x10080018	/* Discrete Control Reg */
+
+/* Discrete Controller (AVR:Atmel AT90LS8535) */
+#define _ADS_AVR_REG		0x10080018
+
+/* On-Board Ethernet */
+#define _ADS_ETHERNET		0x100e0000	/* Ethernet */
+
+/* On-Board Quad UART 16C554 */
+#define	ADS_QUAD_UART1		0x10100000
+#define	ADS_QUAD_UART2		0x10120000
+#define	ADS_QUAD_UART3		0x10140000
+#define	ADS_QUAD_UART4		0x10160000
+
+/* LEDs */
+#define ADS_LED0	GPIO_GPIO20		/* on-board Green */
+#define ADS_LED1	GPIO_GPIO25		/* on-board Yellow */
+#define ADS_LED2	GPIO_GPIO26		/* on-board Red */
+
+/* DCR */
+#define DCR_AVR_RESET		0x01
+#define DCR_SA1111_RESET	0x02
+#define	DCR_BACKLITE_ON		0x04
+
+/* Virtual register addresses */
+
+#ifndef __ASSEMBLY__
+#define ADS_INT_ST1	(*((volatile u_char *) ADS_p2v(_ADS_INT_ST1)))
+#define ADS_INT_ST2	(*((volatile u_char *) ADS_p2v(_ADS_INT_ST2)))
+#define ADS_INT_EN1	(*((volatile u_char *) ADS_p2v(_ADS_INT_EN1)))
+#define ADS_INT_EN2	(*((volatile u_char *) ADS_p2v(_ADS_INT_EN2)))
+#define ADS_ETHERNET	((int) ADS_p2v(_ADS_ETHERNET))
+#define ADS_AVR_REG	(*((volatile u_char *) ADS_p2v(_ADS_AVR_REG)))
+#define ADS_DCR		(*((volatile u_char *) ADS_p2v(_ADS_DCR)))
+#endif
+
+#define	SA1111_BASE	(0x18000000)
+
+#include "SA-1111.h"