patch-2.4.19 linux-2.4.19/include/asm-mips64/sibyte/sb1250_defs.h

Next file: linux-2.4.19/include/asm-mips64/sibyte/sb1250_dma.h
Previous file: linux-2.4.19/include/asm-mips64/sibyte/sb1250.h
Back to the patch index
Back to the overall index

diff -urN linux-2.4.18/include/asm-mips64/sibyte/sb1250_defs.h linux-2.4.19/include/asm-mips64/sibyte/sb1250_defs.h
@@ -0,0 +1,127 @@
+/*  *********************************************************************
+    *  SB1250 Board Support Package
+    *  
+    *  Global constants and macros		File: sb1250_defs.h	
+    *  
+    *  This file contains macros and definitions used by the other
+    *  include files.
+    *
+    *  Author:  Mitch Lichtenberg (mitch@sibyte.com)
+    *  
+    *********************************************************************  
+    *
+    *  Copyright 2000,2001
+    *  Broadcom Corporation. All rights reserved.
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
+    *  the License, or (at your option) any later version.
+    *
+    *  This program is distributed in the hope that it will be useful,
+    *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+    *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    *  GNU General Public License for more details.
+    *
+    *  You should have received a copy of the GNU General Public License
+    *  along with this program; if not, write to the Free Software
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+    *  MA 02111-1307 USA
+    ********************************************************************* */
+
+
+/*  *********************************************************************
+    *  Naming schemes for constants in these files:
+    *  
+    *  M_xxx           MASK constant (identifies bits in a register). 
+    *                  For multi-bit fields, all bits in the field will
+    *                  be set.
+    *
+    *  K_xxx           "Code" constant (value for data in a multi-bit
+    *                  field).  The value is right justified.
+    *
+    *  V_xxx           "Value" constant.  This is the same as the 
+    *                  corresponding "K_xxx" constant, except it is
+    *                  shifted to the correct position in the register.
+    *
+    *  S_xxx           SHIFT constant.  This is the number of bits that
+    *                  a field value (code) needs to be shifted 
+    *                  (towards the left) to put the value in the right
+    *                  position for the register.
+    *
+    *  A_xxx           ADDRESS constant.  This will be a physical 
+    *                  address.  Use the PHYS_TO_K1 macro to generate
+    *                  a K1SEG address.
+    *
+    *  R_xxx           RELATIVE offset constant.  This is an offset from
+    *                  an A_xxx constant (usually the first register in
+    *                  a group).
+    *  
+    *  G_xxx(X)        GET value.  This macro obtains a multi-bit field
+    *                  from a register, masks it, and shifts it to
+    *                  the bottom of the register (retrieving a K_xxx
+    *                  value, for example).
+    *
+    *  V_xxx(X)        VALUE.  This macro computes the value of a
+    *                  K_xxx constant shifted to the correct position
+    *                  in the register.
+    ********************************************************************* */
+
+
+
+
+#ifndef _SB1250_DEFS_H
+#define _SB1250_DEFS_H
+
+/*
+ * Cast to 64-bit number.  Presumably the syntax is different in 
+ * assembly language.
+ *
+ * Note: you'll need to define uint32_t and uint64_t in your headers.
+ */
+
+#if !defined(__ASSEMBLY__)
+#define _SB_MAKE64(x) ((uint64_t)(x))
+#define _SB_MAKE32(x) ((uint32_t)(x))
+#else
+#define _SB_MAKE64(x) (x)
+#define _SB_MAKE32(x) (x)
+#endif
+
+
+/*
+ * Make a mask for 1 bit at position 'n'
+ */
+
+#define _SB_MAKEMASK1(n) (_SB_MAKE64(1) << _SB_MAKE64(n))
+#define _SB_MAKEMASK1_32(n) (_SB_MAKE32(1) << _SB_MAKE32(n))
+
+/*
+ * Make a mask for 'v' bits at position 'n'
+ */
+
+#define _SB_MAKEMASK(v,n) (_SB_MAKE64((_SB_MAKE64(1)<<(v))-1) << _SB_MAKE64(n))
+#define _SB_MAKEMASK_32(v,n) (_SB_MAKE32((_SB_MAKE32(1)<<(v))-1) << _SB_MAKE32(n))
+
+/*
+ * Make a value at 'v' at bit position 'n'
+ */
+
+#define _SB_MAKEVALUE(v,n) (_SB_MAKE64(v) << _SB_MAKE64(n))
+#define _SB_MAKEVALUE_32(v,n) (_SB_MAKE32(v) << _SB_MAKE32(n))
+
+#define _SB_GETVALUE(v,n,m) ((_SB_MAKE64(v) & _SB_MAKE64(m)) >> _SB_MAKE64(n))
+#define _SB_GETVALUE_32(v,n,m) ((_SB_MAKE32(v) & _SB_MAKE32(m)) >> _SB_MAKE32(n))
+
+/*
+ * Macros to read/write on-chip registers
+ * XXX should we do the PHYS_TO_K1 here?
+ */
+
+
+#if !defined(__ASSEMBLY__)
+#define SBWRITECSR(csr,val) *((volatile uint64_t *) PHYS_TO_K1(csr)) = (val)
+#define SBREADCSR(csr) (*((volatile uint64_t *) PHYS_TO_K1(csr)))
+#endif /* __ASSEMBLY__ */
+
+#endif

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)