patch-2.4.20 linux-2.4.20/drivers/media/radio/Config.in

• Lines: 93
• Date: Thu Nov 28 15:53:13 2002
• Orig file: linux-2.4.19/drivers/media/radio/Config.in
• Orig date: Fri Nov 9 14:01:22 2001

diff -urN linux-2.4.19/drivers/media/radio/Config.in linux-2.4.20/drivers/media/radio/Config.in
@@ -4,50 +4,53 @@
 mainmenu_option next_comment
 comment 'Radio Adapters'
 
-dep_tristate '  ADS Cadet AM/FM Tuner' CONFIG_RADIO_CADET $CONFIG_VIDEO_DEV
-dep_tristate '  AIMSlab RadioTrack (aka RadioReveal) support' CONFIG_RADIO_RTRACK $CONFIG_VIDEO_DEV
-if [ "$CONFIG_RADIO_RTRACK" = "y" ]; then
-   hex '  RadioTrack i/o port (0x20f or 0x30f)' CONFIG_RADIO_RTRACK_PORT 20f
-fi
-dep_tristate '  AIMSlab RadioTrack II support' CONFIG_RADIO_RTRACK2 $CONFIG_VIDEO_DEV
-if [ "$CONFIG_RADIO_RTRACK2" = "y" ]; then
-   hex '    RadioTrack II i/o port (0x20c or 0x30c)' CONFIG_RADIO_RTRACK2_PORT 30c
-fi
-dep_tristate '  Aztech/Packard Bell Radio' CONFIG_RADIO_AZTECH $CONFIG_VIDEO_DEV
-if [ "$CONFIG_RADIO_AZTECH" = "y" ]; then
-   hex '    Aztech/Packard Bell I/O port (0x350 or 0x358)' CONFIG_RADIO_AZTECH_PORT 350
-fi
-dep_tristate '  GemTek Radio Card support' CONFIG_RADIO_GEMTEK $CONFIG_VIDEO_DEV
-if [ "$CONFIG_RADIO_GEMTEK" = "y" ]; then
-   hex '    GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)' CONFIG_RADIO_GEMTEK_PORT 34c
+if [ "$CONFIG_ISA" = "y" ]; then
+   dep_tristate '  ADS Cadet AM/FM Tuner' CONFIG_RADIO_CADET $CONFIG_VIDEO_DEV
+   dep_tristate '  AIMSlab RadioTrack (aka RadioReveal) support' CONFIG_RADIO_RTRACK $CONFIG_VIDEO_DEV
+   if [ "$CONFIG_RADIO_RTRACK" = "y" ]; then
+      hex '  RadioTrack i/o port (0x20f or 0x30f)' CONFIG_RADIO_RTRACK_PORT 20f
+   fi
+   dep_tristate '  AIMSlab RadioTrack II support' CONFIG_RADIO_RTRACK2 $CONFIG_VIDEO_DEV
+   if [ "$CONFIG_RADIO_RTRACK2" = "y" ]; then
+      hex '    RadioTrack II i/o port (0x20c or 0x30c)' CONFIG_RADIO_RTRACK2_PORT 30c
+   fi
+   dep_tristate '  Aztech/Packard Bell Radio' CONFIG_RADIO_AZTECH $CONFIG_VIDEO_DEV
+   if [ "$CONFIG_RADIO_AZTECH" = "y" ]; then
+      hex '    Aztech/Packard Bell I/O port (0x350 or 0x358)' CONFIG_RADIO_AZTECH_PORT 350
+  fi
+   dep_tristate '  GemTek Radio Card support' CONFIG_RADIO_GEMTEK $CONFIG_VIDEO_DEV
+   if [ "$CONFIG_RADIO_GEMTEK" = "y" ]; then
+      hex '    GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)' CONFIG_RADIO_GEMTEK_PORT 34c
+   fi
 fi
 dep_tristate '  GemTek PCI Radio Card support' CONFIG_RADIO_GEMTEK_PCI $CONFIG_VIDEO_DEV $CONFIG_PCI
 dep_tristate '  Guillemot MAXI Radio FM 2000 radio' CONFIG_RADIO_MAXIRADIO $CONFIG_VIDEO_DEV
 dep_tristate '  Maestro on board radio' CONFIG_RADIO_MAESTRO $CONFIG_VIDEO_DEV
 dep_tristate '  miroSOUND PCM20 radio' CONFIG_RADIO_MIROPCM20 $CONFIG_VIDEO_DEV $CONFIG_SOUND_ACI_MIXER
-dep_tristate '    miroSOUND PCM20 radio RDS user interface (EXPERIMENTAL)' CONFIG_RADIO_MIROPCM20_RDS $CONFIG_RADIO_MIROPCM20 $CONFIG_EXPERIMENTAL
-dep_tristate '  SF16FMI Radio' CONFIG_RADIO_SF16FMI $CONFIG_VIDEO_DEV
-dep_tristate '  TerraTec ActiveRadio ISA Standalone' CONFIG_RADIO_TERRATEC $CONFIG_VIDEO_DEV
-if [ "$CONFIG_RADIO_TERRATEC" = "y" ]; then
-   hex '    Terratec i/o port (normally 0x590)' CONFIG_RADIO_TERRATEC_PORT 590
-fi
-dep_tristate '  Trust FM radio card' CONFIG_RADIO_TRUST $CONFIG_VIDEO_DEV
-if [ "$CONFIG_RADIO_TRUST" = "y" ]; then
-   hex '    Trust i/o port (usually 0x350 or 0x358)' CONFIG_RADIO_TRUST_PORT 350
-fi
-dep_tristate '  Typhoon Radio (a.k.a. EcoRadio)' CONFIG_RADIO_TYPHOON $CONFIG_VIDEO_DEV
-if [ "$CONFIG_PROC_FS" = "y" ]; then
-   if [ "$CONFIG_RADIO_TYPHOON" != "n" ]; then
-      bool '    Support for /proc/radio-typhoon' CONFIG_RADIO_TYPHOON_PROC_FS
+if [ "$CONFIG_ISA" = "y" ]; then
+   dep_tristate '    miroSOUND PCM20 radio RDS user interface (EXPERIMENTAL)' CONFIG_RADIO_MIROPCM20_RDS $CONFIG_RADIO_MIROPCM20 $CONFIG_EXPERIMENTAL
+   dep_tristate '  SF16FMI Radio' CONFIG_RADIO_SF16FMI $CONFIG_VIDEO_DEV
+   dep_tristate '  TerraTec ActiveRadio ISA Standalone' CONFIG_RADIO_TERRATEC $CONFIG_VIDEO_DEV
+   if [ "$CONFIG_RADIO_TERRATEC" = "y" ]; then
+      hex '    Terratec i/o port (normally 0x590)' CONFIG_RADIO_TERRATEC_PORT 590
+   fi
+   dep_tristate '  Trust FM radio card' CONFIG_RADIO_TRUST $CONFIG_VIDEO_DEV
+   if [ "$CONFIG_RADIO_TRUST" = "y" ]; then
+      hex '    Trust i/o port (usually 0x350 or 0x358)' CONFIG_RADIO_TRUST_PORT 350
+   fi
+   dep_tristate '  Typhoon Radio (a.k.a. EcoRadio)' CONFIG_RADIO_TYPHOON $CONFIG_VIDEO_DEV
+   if [ "$CONFIG_PROC_FS" = "y" ]; then
+      if [ "$CONFIG_RADIO_TYPHOON" != "n" ]; then
+         bool '    Support for /proc/radio-typhoon' CONFIG_RADIO_TYPHOON_PROC_FS
+      fi
+   fi
+   if [ "$CONFIG_RADIO_TYPHOON" = "y" ]; then
+      hex '  Typhoon I/O port (0x316 or 0x336)' CONFIG_RADIO_TYPHOON_PORT 316
+      int '  Typhoon frequency set when muting the device (kHz)' CONFIG_RADIO_TYPHOON_MUTEFREQ 87500
+   fi
+   dep_tristate '  Zoltrix Radio' CONFIG_RADIO_ZOLTRIX $CONFIG_VIDEO_DEV
+   if [ "$CONFIG_RADIO_ZOLTRIX" = "y" ]; then
+      hex '    ZOLTRIX I/O port (0x20c or 0x30c)' CONFIG_RADIO_ZOLTRIX_PORT 20c
    fi
 fi
-if [ "$CONFIG_RADIO_TYPHOON" = "y" ]; then
-   hex '  Typhoon I/O port (0x316 or 0x336)' CONFIG_RADIO_TYPHOON_PORT 316
-   int '  Typhoon frequency set when muting the device (kHz)' CONFIG_RADIO_TYPHOON_MUTEFREQ 87500
-fi
-dep_tristate '  Zoltrix Radio' CONFIG_RADIO_ZOLTRIX $CONFIG_VIDEO_DEV
-if [ "$CONFIG_RADIO_ZOLTRIX" = "y" ]; then
-   hex '    ZOLTRIX I/O port (0x20c or 0x30c)' CONFIG_RADIO_ZOLTRIX_PORT 20c
-fi
-
 endmenu