patch-2.4.20 linux-2.4.20/include/asm-ppc/ppc_asm.h

• Lines: 281
• Date: Thu Nov 28 15:53:15 2002
• Orig file: linux-2.4.19/include/asm-ppc/ppc_asm.h
• Orig date: Wed Dec 31 16:00:00 1969

diff -urN linux-2.4.19/include/asm-ppc/ppc_asm.h linux-2.4.20/include/asm-ppc/ppc_asm.h
@@ -0,0 +1,280 @@
+/*
+ * BK Id: %F% %I% %G% %U% %#%
+ */
+/*
+ * include/asm-ppc/ppc_asm.h
+ *
+ * Definitions used by various bits of low-level assembly code on PowerPC.
+ *
+ * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+
+/*
+ * Macros for storing registers into and loading registers from
+ * exception frames.
+ */
+#define SAVE_GPR(n, base)	stw	n,GPR0+4*(n)(base)
+#define SAVE_2GPRS(n, base)	SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base)	SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base)	SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base)	SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_GPR(n, base)	lwz	n,GPR0+4*(n)(base)
+#define REST_2GPRS(n, base)	REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base)	REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base)	REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base)	REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+#define SAVE_FPR(n, base)	stfd	n,THREAD_FPR0+8*(n)(base)
+#define SAVE_2FPRS(n, base)	SAVE_FPR(n, base); SAVE_FPR(n+1, base)
+#define SAVE_4FPRS(n, base)	SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
+#define SAVE_8FPRS(n, base)	SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
+#define SAVE_16FPRS(n, base)	SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
+#define SAVE_32FPRS(n, base)	SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
+#define REST_FPR(n, base)	lfd	n,THREAD_FPR0+8*(n)(base)
+#define REST_2FPRS(n, base)	REST_FPR(n, base); REST_FPR(n+1, base)
+#define REST_4FPRS(n, base)	REST_2FPRS(n, base); REST_2FPRS(n+2, base)
+#define REST_8FPRS(n, base)	REST_4FPRS(n, base); REST_4FPRS(n+4, base)
+#define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
+#define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
+
+/*
+ * Once a version of gas that understands the AltiVec instructions
+ * is freely available, we can do this the normal way...  - paulus
+ */
+#define LVX(r,a,b)	.long	(31<<26)+((r)<<21)+((a)<<16)+((b)<<11)+(103<<1)
+#define STVX(r,a,b)	.long	(31<<26)+((r)<<21)+((a)<<16)+((b)<<11)+(231<<1)
+#define MFVSCR(r)	.long	(4<<26)+((r)<<21)+(770<<1)
+#define MTVSCR(r)	.long	(4<<26)+((r)<<11)+(802<<1)
+#define DSSALL		.long	(0x1f<<26)+(0x10<<21)+(0x336<<1)
+
+#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); STVX(n,b,base)
+#define SAVE_2VR(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) 
+#define SAVE_4VR(n,b,base)	SAVE_2VR(n,b,base); SAVE_2VR(n+2,b,base) 
+#define SAVE_8VR(n,b,base)	SAVE_4VR(n,b,base); SAVE_4VR(n+4,b,base) 
+#define SAVE_16VR(n,b,base)	SAVE_8VR(n,b,base); SAVE_8VR(n+8,b,base)
+#define SAVE_32VR(n,b,base)	SAVE_16VR(n,b,base); SAVE_16VR(n+16,b,base)
+#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); LVX(n,b,base)
+#define REST_2VR(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base) 
+#define REST_4VR(n,b,base)	REST_2VR(n,b,base); REST_2VR(n+2,b,base) 
+#define REST_8VR(n,b,base)	REST_4VR(n,b,base); REST_4VR(n+4,b,base) 
+#define REST_16VR(n,b,base)	REST_8VR(n,b,base); REST_8VR(n+8,b,base) 
+#define REST_32VR(n,b,base)	REST_16VR(n,b,base); REST_16VR(n+16,b,base)
+
+#ifdef CONFIG_PPC601_SYNC_FIX
+#define SYNC				\
+BEGIN_FTR_SECTION			\
+	sync;				\
+	isync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define SYNC_601			\
+BEGIN_FTR_SECTION			\
+	sync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define ISYNC_601			\
+BEGIN_FTR_SECTION			\
+	isync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#else
+#define	SYNC
+#define SYNC_601
+#define ISYNC_601
+#endif
+
+#ifndef CONFIG_SMP
+#define TLBSYNC
+#else /* CONFIG_SMP */
+/* tlbsync is not implemented on 601 */
+#define TLBSYNC				\
+BEGIN_FTR_SECTION			\
+	tlbsync;			\
+	sync;				\
+END_FTR_SECTION_IFCLR(CPU_FTR_601)
+#endif
+
+/*
+ * This instruction is not implemented on the PPC 603 or 601; however, on
+ * the 403GCX and 405GP tlbia IS defined and tlbie is not.
+ * All of these instructions exist in the 8xx, they have magical powers,
+ * and they must be used.
+ */
+
+#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx)
+#define tlbia					\
+	li	r4,1024;			\
+	mtctr	r4;				\
+	lis	r4,KERNELBASE@h;		\
+0:	tlbie	r4;				\
+	addi	r4,r4,0x1000;			\
+	bdnz	0b
+#endif
+
+/*
+ * On APUS (Amiga PowerPC cpu upgrade board), we don't know the
+ * physical base address of RAM at compile time.
+ */
+#define tophys(rd,rs)				\
+0:	addis	rd,rs,-KERNELBASE@h;		\
+	.section ".vtop_fixup","aw";		\
+	.align  1;				\
+	.long   0b;				\
+	.previous
+
+#define tovirt(rd,rs)				\
+0:	addis	rd,rs,KERNELBASE@h;		\
+	.section ".ptov_fixup","aw";		\
+	.align  1;				\
+	.long   0b;				\
+	.previous
+
+/*
+ * On 64-bit cpus, we use the rfid instruction instead of rfi, but
+ * we then have to make sure we preserve the top 32 bits except for
+ * the 64-bit mode bit, which we clear.
+ */
+#ifdef CONFIG_PPC64BRIDGE
+#define	FIX_SRR1(ra, rb)	\
+	mr	rb,ra;		\
+	mfmsr	ra;		\
+	clrldi	ra,ra,1;		/* turn off 64-bit mode */ \
+	rldimi	ra,rb,0,32
+#define	RFI		.long	0x4c000024	/* rfid instruction */
+#define MTMSRD(r)	.long	(0x7c000164 + ((r) << 21))	/* mtmsrd */
+#define CLR_TOP32(r)	rlwinm	(r),(r),0,0,31	/* clear top 32 bits */
+
+#else
+#define FIX_SRR1(ra, rb)
+#define	RFI		rfi
+#define MTMSRD(r)	mtmsr	r
+#define CLR_TOP32(r)
+#endif /* CONFIG_PPC64BRIDGE */
+
+/* The boring bits... */
+
+/* Condition Register Bit Fields */
+
+#define	cr0	0
+#define	cr1	1
+#define	cr2	2
+#define	cr3	3
+#define	cr4	4
+#define	cr5	5
+#define	cr6	6
+#define	cr7	7
+
+
+/* General Purpose Registers (GPRs) */
+
+#define	r0	0
+#define	r1	1
+#define	r2	2
+#define	r3	3
+#define	r4	4
+#define	r5	5
+#define	r6	6
+#define	r7	7
+#define	r8	8
+#define	r9	9
+#define	r10	10
+#define	r11	11
+#define	r12	12
+#define	r13	13
+#define	r14	14
+#define	r15	15
+#define	r16	16
+#define	r17	17
+#define	r18	18
+#define	r19	19
+#define	r20	20
+#define	r21	21
+#define	r22	22
+#define	r23	23
+#define	r24	24
+#define	r25	25
+#define	r26	26
+#define	r27	27
+#define	r28	28
+#define	r29	29
+#define	r30	30
+#define	r31	31
+
+
+/* Floating Point Registers (FPRs) */
+
+#define	fr0	0
+#define	fr1	1
+#define	fr2	2
+#define	fr3	3
+#define	fr4	4
+#define	fr5	5
+#define	fr6	6
+#define	fr7	7
+#define	fr8	8
+#define	fr9	9
+#define	fr10	10
+#define	fr11	11
+#define	fr12	12
+#define	fr13	13
+#define	fr14	14
+#define	fr15	15
+#define	fr16	16
+#define	fr17	17
+#define	fr18	18
+#define	fr19	19
+#define	fr20	20
+#define	fr21	21
+#define	fr22	22
+#define	fr23	23
+#define	fr24	24
+#define	fr25	25
+#define	fr26	26
+#define	fr27	27
+#define	fr28	28
+#define	fr29	29
+#define	fr30	30
+#define	fr31	31
+
+#define	vr0	0
+#define	vr1	1
+#define	vr2	2
+#define	vr3	3
+#define	vr4	4
+#define	vr5	5
+#define	vr6	6
+#define	vr7	7
+#define	vr8	8
+#define	vr9	9
+#define	vr10	10
+#define	vr11	11
+#define	vr12	12
+#define	vr13	13
+#define	vr14	14
+#define	vr15	15
+#define	vr16	16
+#define	vr17	17
+#define	vr18	18
+#define	vr19	19
+#define	vr20	20
+#define	vr21	21
+#define	vr22	22
+#define	vr23	23
+#define	vr24	24
+#define	vr25	25
+#define	vr26	26
+#define	vr27	27
+#define	vr28	28
+#define	vr29	29
+#define	vr30	30
+#define	vr31	31
+
+/* some stab codes */
+#define N_FUN	36
+#define N_RSYM	64
+#define N_SLINE	68
+#define N_SO	100