patch-2.4.22 linux-2.4.22/arch/mips/au1000/xxs1500/irqmap.c

Next file: linux-2.4.22/arch/mips/baget/Makefile
Previous file: linux-2.4.22/arch/mips/au1000/xxs1500/init.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/arch/mips/au1000/xxs1500/irqmap.c linux-2.4.22/arch/mips/au1000/xxs1500/irqmap.c
@@ -0,0 +1,106 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1xxx irq map table
+ *
+ * Copyright 2003 Embedded Edge, LLC
+ *		dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/au1000.h>
+
+au1xxx_irq_map_t au1xxx_irq_map[] = {
+	{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+	{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
+	{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
+	{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
+	{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
+	{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
+	{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
+	{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
+	{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
+	{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+
+	{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
+	{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
+
+	{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+	{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+
+	{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
+
+	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, 
+	{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */
+	{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 },
+
+	{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+
+	/* Careful if you change match 2 request!
+	 * The interrupt handler is called directly
+	 * from the low level dispatch code.
+	 */
+	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+};
+
+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)