patch-2.4.22 linux-2.4.22/arch/mips/ddb5074/irq.c

Next file: linux-2.4.22/arch/mips/ddb5074/nile4.c
Previous file: linux-2.4.22/arch/mips/ddb5074/int-handler.S
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/arch/mips/ddb5074/irq.c linux-2.4.22/arch/mips/ddb5074/irq.c
@@ -1,226 +0,0 @@
-/*
- *  arch/mips/ddb5074/irq.c -- NEC DDB Vrc-5074 interrupt routines
- *
- *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- *                     Sony Software Development Center Europe (SDCE), Brussels
- */
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/ptrace.h>
-#include <asm/nile4.h>
-#include <asm/ddb5074.h>
-
-
-extern void __init i8259_init(void);
-extern void i8259_disable_irq(unsigned int irq_nr);
-extern void i8259_enable_irq(unsigned int irq_nr);
-
-extern asmlinkage void ddbIRQ(void);
-extern asmlinkage void i8259_do_irq(int irq, struct pt_regs *regs);
-extern asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
-
-
-void no_action(int cpl, void *dev_id, struct pt_regs *regs)
-{
-}
-
-
-#define M1543_PNP_CONFIG	0x03f0	/* PnP Config Port */
-#define M1543_PNP_INDEX		0x03f0	/* PnP Index Port */
-#define M1543_PNP_DATA		0x03f1	/* PnP Data Port */
-
-#define M1543_PNP_ALT_CONFIG	0x0370	/* Alternative PnP Config Port */
-#define M1543_PNP_ALT_INDEX	0x0370	/* Alternative PnP Index Port */
-#define M1543_PNP_ALT_DATA	0x0371	/* Alternative PnP Data Port */
-
-#define M1543_INT1_MASTER_CTRL	0x0020	/* INT_1 (master) Control Register */
-#define M1543_INT1_MASTER_MASK	0x0021	/* INT_1 (master) Mask Register */
-
-#define M1543_INT1_SLAVE_CTRL	0x00a0	/* INT_1 (slave) Control Register */
-#define M1543_INT1_SLAVE_MASK	0x00a1	/* INT_1 (slave) Mask Register */
-
-#define M1543_INT1_MASTER_ELCR	0x04d0	/* INT_1 (master) Edge/Level Control */
-#define M1543_INT1_SLAVE_ELCR	0x04d1	/* INT_1 (slave) Edge/Level Control */
-
-
-static void m1543_irq_setup(void)
-{
-	/*
-	 *  The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13.  Not all
-	 *  the possible IO sources in the M1543 are in use by us.  We will
-	 *  use the following mapping:
-	 *
-	 *      IRQ1  - keyboard (default set by M1543)
-	 *      IRQ3  - reserved for UART B (default set by M1543) (note that
-	 *              the schematics for the DDB Vrc-5074 board seem to
-	 *              indicate that IRQ3 is connected to the DS1386
-	 *              watchdog timer interrupt output so we might have
-	 *              a conflict)
-	 *      IRQ4  - reserved for UART A (default set by M1543)
-	 *      IRQ5  - parallel (default set by M1543)
-	 *      IRQ8  - DS1386 time of day (RTC) interrupt
-	 *      IRQ12 - mouse
-	 */
-
-	/*
-	 *  Assing mouse interrupt to IRQ12
-	 */
-
-	/* Enter configuration mode */
-	outb(0x51, M1543_PNP_CONFIG);
-	outb(0x23, M1543_PNP_CONFIG);
-
-	/* Select logical device 7 (Keyboard) */
-	outb(0x07, M1543_PNP_INDEX);
-	outb(0x07, M1543_PNP_DATA);
-
-	/* Select IRQ12 */
-	outb(0x72, M1543_PNP_INDEX);
-	outb(0x0c, M1543_PNP_DATA);
-
-	/* Leave configration mode */
-	outb(0xbb, M1543_PNP_CONFIG);
-
-
-	/* Initialize the 8259 PIC in the M1543 */
-	i8259_init();
-
-	/* Enable the interrupt cascade */
-	nile4_enable_irq(NILE4_INT_INTE);
-
-	request_region(M1543_PNP_CONFIG, 2, "M1543 config");
-	request_region(M1543_INT1_MASTER_ELCR, 2, "pic ELCR");
-}
-
-static void nile4_irq_setup(void)
-{
-	int i;
-
-	/* Map all interrupts to CPU int #0 */
-	nile4_map_irq_all(0);
-
-	/* PCI INTA#-E# must be level triggered */
-	nile4_set_pci_irq_level_or_edge(0, 1);
-	nile4_set_pci_irq_level_or_edge(1, 1);
-	nile4_set_pci_irq_level_or_edge(2, 1);
-	nile4_set_pci_irq_level_or_edge(3, 1);
-	nile4_set_pci_irq_level_or_edge(4, 1);
-
-	/* PCI INTA#-D# must be active low, INTE# must be active high */
-	nile4_set_pci_irq_polarity(0, 0);
-	nile4_set_pci_irq_polarity(1, 0);
-	nile4_set_pci_irq_polarity(2, 0);
-	nile4_set_pci_irq_polarity(3, 0);
-	nile4_set_pci_irq_polarity(4, 1);
-
-	for (i = 0; i < 16; i++)
-		nile4_clear_irq(i);
-
-	/* Enable CPU int #0 */
-	nile4_enable_irq_output(0);
-
-	request_mem_region(NILE4_BASE, NILE4_SIZE, "Nile 4");
-}
-
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = { no_action, 0, 0, "cascade", NULL, NULL };
-
-
-void disable_irq(unsigned int irq_nr)
-{
-	if (is_i8259_irq(irq_nr))
-		i8259_disable_irq(irq_nr);
-	else
-		nile4_disable_irq(irq_to_nile4(irq_nr));
-}
-
-void enable_irq(unsigned int irq_nr)
-{
-	if (is_i8259_irq(irq_nr))
-		i8259_enable_irq(irq_nr);
-	else
-		nile4_enable_irq(irq_to_nile4(irq_nr));
-}
-
-int table[16] = { 0, };
-
-void ddb_local0_irqdispatch(struct pt_regs *regs)
-{
-	u32 mask;
-	int nile4_irq;
-#if 1
-	volatile static int nesting = 0;
-	if (nesting++ == 0)
-		ddb5074_led_d3(1);
-	ddb5074_led_hex(nesting < 16 ? nesting : 15);
-#endif
-
-	mask = nile4_get_irq_stat(0);
-	nile4_clear_irq_mask(mask);
-
-	/* Handle the timer interrupt first */
-	if (mask & (1 << NILE4_INT_GPT)) {
-		nile4_disable_irq(NILE4_INT_GPT);
-		do_IRQ(nile4_to_irq(NILE4_INT_GPT), regs);
-		nile4_enable_irq(NILE4_INT_GPT);
-		mask &= ~(1 << NILE4_INT_GPT);
-	}
-	for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1)
-		if (mask & 1) {
-			nile4_disable_irq(nile4_irq);
-			if (nile4_irq == NILE4_INT_INTE) {
-				int i8259_irq = nile4_i8259_iack();
-				i8259_do_irq(i8259_irq, regs);
-			} else
-				do_IRQ(nile4_to_irq(nile4_irq), regs);
-			nile4_enable_irq(nile4_irq);
-		}
-#if 1
-	if (--nesting == 0)
-		ddb5074_led_d3(0);
-	ddb5074_led_hex(nesting < 16 ? nesting : 15);
-#endif
-}
-
-void ddb_local1_irqdispatch(void)
-{
-	printk("ddb_local1_irqdispatch called\n");
-}
-
-void ddb_buserror_irq(void)
-{
-	printk("ddb_buserror_irq called\n");
-}
-
-void ddb_8254timer_irq(void)
-{
-	printk("ddb_8254timer_irq called\n");
-}
-
-void __init ddb_irq_setup(void)
-{
-#ifdef CONFIG_REMOTE_DEBUG
-	if (remote_debug)
-		set_debug_traps();
-	breakpoint();		/* you may move this line to whereever you want :-) */
-#endif
-	request_region(0x20, 0x20, "pic1");
-	request_region(0xa0, 0x20, "pic2");
-	i8259_setup_irq(2, &irq2);
-
-	nile4_irq_setup();
-	m1543_irq_setup();
-
-	set_except_vector(0, ddbIRQ);
-}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)