patch-2.4.22 linux-2.4.22/arch/mips/mm/sc-rm7k.c

Next file: linux-2.4.22/arch/mips/mm/tlb-r3k.c
Previous file: linux-2.4.22/arch/mips/mm/sc-r5k.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/arch/mips/mm/sc-rm7k.c linux-2.4.22/arch/mips/mm/sc-rm7k.c
@@ -0,0 +1,193 @@
+/*
+ * sc-rm7k.c: RM7000 cache management functions.
+ *
+ * Copyright (C) 1997, 2001, 2003 Ralf Baechle (ralf@gnu.org),
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+
+#include <asm/addrspace.h>
+#include <asm/bcache.h>
+#include <asm/cacheops.h>
+#include <asm/mipsregs.h>
+#include <asm/processor.h>
+
+/* Primary cache parameters. */
+#define sc_lsize	32
+#define tc_pagesize	(32*128)
+
+static unsigned long scache_way_size = 32;		/* HACKKKKK!!! */
+
+/* Secondary cache parameters. */
+#define scache_size	(256*1024)	/* Fixed to 256KiB on RM7000 */
+
+extern unsigned long icache_way_size, dcache_way_size;
+
+#include <asm/r4kcache.h>
+
+int rm7k_tcache_enabled;
+
+/*
+ * Writeback and invalidate the primary cache dcache before DMA.
+ * (XXX These need to be fixed ...)
+ */
+static void rm7k_sc_wback_inv(unsigned long addr, unsigned long size)
+{
+	unsigned long end, a;
+
+#ifdef DEBUG_CACHE
+	printk("rm7k_sc_wback_inv[%08lx,%08lx]", addr, size);
+#endif
+
+	a = addr & ~(sc_lsize - 1);
+	end = (addr + size - 1) & ~(sc_lsize - 1);
+	while (1) {
+		flush_scache_line(a);	/* Hit_Writeback_Inv_SD */
+		if (a == end)
+			break;
+		a += sc_lsize;
+	}
+
+	if (!rm7k_tcache_enabled)
+		return;
+
+	a = addr & ~(tc_pagesize - 1);
+	end = (addr + size - 1) & ~(tc_pagesize - 1);
+	while(1) {
+		invalidate_tcache_page(a);	/* Page_Invalidate_T */
+		if (a == end)
+			break;
+		a += tc_pagesize;
+	}
+}
+
+static void rm7k_sc_inv(unsigned long addr, unsigned long size)
+{
+	unsigned long end, a;
+
+#ifdef DEBUG_CACHE
+	printk("rm7k_sc_inv[%08lx,%08lx]", addr, size);
+#endif
+
+	a = addr & ~(sc_lsize - 1);
+	end = (addr + size - 1) & ~(sc_lsize - 1);
+	while (1) {
+		invalidate_scache_line(a);	/* Hit_Invalidate_SD */
+		if (a == end)
+			break;
+		a += sc_lsize;
+	}
+
+	if (!rm7k_tcache_enabled)
+		return;
+
+	a = addr & ~(tc_pagesize - 1);
+	end = (addr + size - 1) & ~(tc_pagesize - 1);
+	while(1) {
+		invalidate_tcache_page(a);	/* Page_Invalidate_T */
+		if (a == end)
+			break;
+		a += tc_pagesize;
+	}
+}
+
+/*
+ * This function is executed in the uncached segment KSEG1.
+ * It must not touch the stack, because the stack pointer still points
+ * into KSEG0.
+ *
+ * Three options:
+ *	- Write it in assembly and guarantee that we don't use the stack.
+ *	- Disable caching for KSEG0 before calling it.
+ *	- Pray that GCC doesn't randomly start using the stack.
+ *
+ * This being Linux, we obviously take the least sane of those options -
+ * following DaveM's lead in c-r4k.c
+ *
+ * It seems we get our kicks from relying on unguaranteed behaviour in GCC
+ */
+static __init void rm7k_sc_enable(void)
+{
+	int i;
+
+	set_c0_config(1<<3);				/* CONF_SE */
+
+	write_c0_taglo(0);
+	write_c0_taghi(0);
+
+	for (i=0; i<scache_size; i+=sc_lsize) {
+		__asm__ __volatile__ (
+		      ".set noreorder\n\t"
+		      ".set mips3\n\t"
+		      "cache %1, (%0)\n\t"
+		      ".set mips0\n\t"
+		      ".set reorder"
+		      :
+		      : "r" (KSEG0ADDR(i)),
+		        "i" (Index_Store_Tag_SD));
+	}
+}
+
+static void rm7k_sc_disable(void)
+{
+	set_c0_config(1<<3);				/* CONF_SE */
+}
+
+static inline int __init rm7k_sc_probe(void)
+{
+	void (*func)(void) = KSEG1ADDR(&rm7k_sc_enable);
+	unsigned int config = read_c0_config();
+
+	if ((config >> 31) & 1)
+		return 0;
+
+	printk(KERN_INFO "Secondary cache size %ldK, linesize 32 bytes.\n",
+	       (scache_size >> 10), sc_lsize);
+
+	if ((config >> 3) & 1)
+		return;
+
+	printk(KERN_INFO "Enabling secondary cache...");
+	func();
+	printk("  done\n");
+
+	/*
+	 * While we're at it let's deal with the tertiary cache.
+	 */
+	if ((config >> 17) & 1)
+		return 1;
+
+	/*
+	 * We can't enable the L3 cache yet. There may be board-specific
+	 * magic necessary to turn it on, and blindly asking the CPU to
+	 * start using it would may give cache errors.
+	 *
+	 * Also, board-specific knowledge may allow us to use the
+	 * CACHE Flash_Invalidate_T instruction if the tag RAM supports
+	 * it, and may specify the size of the L3 cache so we don't have
+	 * to probe it.
+	 */
+	printk(KERN_INFO "Tertiary cache present, %s enabled\n",
+	       config&(1<<12) ? "already" : "not (yet)");
+
+	if ((config >> 12) & 1)
+		rm7k_tcache_enabled = 1;
+
+	return 1;
+}
+
+struct bcache_ops rm7k_sc_ops = {
+	.bc_enable = rm7k_sc_enable,
+	.bc_disable = rm7k_sc_disable,
+	.bc_wback_inv = rm7k_sc_wback_inv,
+	.bc_inv = rm7k_sc_inv
+};
+
+void __init rm7k_sc_init(void)
+{
+	if (rm7k_sc_probe()) {
+		rm7k_sc_enable();
+		bcops = &rm7k_sc_ops;
+	}
+}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)