patch-2.4.22 linux-2.4.22/arch/mips/sgi-ip32/ip32-irq.c

Next file: linux-2.4.22/arch/mips/sgi-ip32/ip32-pci.c
Previous file: linux-2.4.22/arch/mips/sgi-ip32/ip32-irq-glue.S
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/arch/mips/sgi-ip32/ip32-irq.c linux-2.4.22/arch/mips/sgi-ip32/ip32-irq.c
@@ -1,584 +0,0 @@
-/*
- * Code to handle IP32 IRQs
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000 Harald Koerfgen
- * Copyright (C) 2001 Keith M Wesolowski
- */
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/random.h>
-#include <linux/sched.h>
-
-#include <asm/bitops.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/ip32/ip32_ints.h>
-#include <asm/ip32/crime.h>
-#include <asm/ip32/mace.h>
-#include <asm/signal.h>
-
-#undef DEBUG_IRQ
-#ifdef DEBUG_IRQ
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-/* O2 irq map
- *
- * IP0 -> software (ignored)
- * IP1 -> software (ignored)
- * IP2 -> (irq0) C crime 1.1 all interrupts; crime 1.5 ???
- * IP3 -> (irq1) X unknown
- * IP4 -> (irq2) X unknown
- * IP5 -> (irq3) X unknown
- * IP6 -> (irq4) X unknown
- * IP7 -> (irq5) 0 CPU count/compare timer (system timer)
- *
- * crime: (C)
- *
- * CRIME_INT_STAT 31:0:
- *
- * 0 -> 1 Video in 1
- * 1 -> 2 Video in 2
- * 2 -> 3 Video out
- * 3 -> 4 Mace ethernet
- * 4 -> S  SuperIO sub-interrupt
- * 5 -> M  Miscellaneous sub-interrupt
- * 6 -> A  Audio sub-interrupt
- * 7 -> 8  PCI bridge errors
- * 8 -> 9  PCI SCSI aic7xxx 0
- * 9 -> 10  PCI SCSI aic7xxx 1
- * 10 -> 11 PCI slot 0
- * 11 -> 12 unused (PCI slot 1)
- * 12 -> 13 unused (PCI slot 2)
- * 13 -> 14 unused (PCI shared 0)
- * 14 -> 15 unused (PCI shared 1)
- * 15 -> 16 unused (PCI shared 2)
- * 16 -> 17 GBE0 (E)
- * 17 -> 18 GBE1 (E)
- * 18 -> 19 GBE2 (E)
- * 19 -> 20 GBE3 (E)
- * 20 -> 21 CPU errors
- * 21 -> 22 Memory errors
- * 22 -> 23 RE empty edge (E)
- * 23 -> 24 RE full edge (E)
- * 24 -> 25 RE idle edge (E)
- * 25 -> 26 RE empty level
- * 26 -> 27 RE full level
- * 27 -> 28 RE idle level
- * 28 -> 29  unused (software 0) (E)
- * 29 -> 30  unused (software 1) (E)
- * 30 -> 31  unused (software 2) - crime 1.5 CPU SysCorError (E)
- * 31 -> 32 VICE
- *
- * S, M, A: Use the MACE ISA interrupt register
- * MACE_ISA_INT_STAT 31:0
- *
- * 0-7 -> 33-40 Audio
- * 8 -> 41 RTC
- * 9 -> 42 Keyboard
- * 10 -> X Keyboard polled
- * 11 -> 44 Mouse
- * 12 -> X Mouse polled
- * 13-15 -> 46-48 Count/compare timers
- * 16-19 -> 49-52 Parallel (16 E)
- * 20-25 -> 53-58 Serial 1 (22 E)
- * 26-31 -> 59-64 Serial 2 (28 E)
- *
- * Note that this means IRQs 5-7, 43, and 45 do not exist.  This is a
- * different IRQ map than IRIX uses, but that's OK as Linux irq handling
- * is quite different anyway.
- */
-
-/* Some initial interrupts to set up */
-extern void crime_memerr_intr (unsigned int irq, void *dev_id,
-			       struct pt_regs *regs);
-extern void crime_cpuerr_intr (unsigned int irq, void *dev_id,
-			       struct pt_regs *regs);
-
-struct irqaction memerr_irq = { crime_memerr_intr, SA_INTERRUPT,
-			       0, "CRIME memory error", NULL,
-			       NULL };
-struct irqaction cpuerr_irq = { crime_cpuerr_intr, SA_INTERRUPT,
-			       0, "CRIME CPU error", NULL,
-			       NULL };
-
-extern void ip32_handle_int (void);
-asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs);
-
-/*
- * For interrupts wired from a single device to the CPU.  Only the clock
- * uses this it seems, which is IRQ 0 and IP7.
- */
-
-static void enable_cpu_irq(unsigned int irq)
-{
-	set_cp0_status(STATUSF_IP7);
-}
-
-static unsigned int startup_cpu_irq(unsigned int irq)
-{
-	enable_cpu_irq(irq);
-	return 0;
-}
-
-static void disable_cpu_irq(unsigned int irq)
-{
-	clear_cp0_status(STATUSF_IP7);
-}
-
-static void end_cpu_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_cpu_irq (irq);
-}
-
-#define shutdown_cpu_irq disable_cpu_irq
-#define mask_and_ack_cpu_irq disable_cpu_irq
-
-static struct hw_interrupt_type ip32_cpu_interrupt = {
-	"IP32 CPU",
-	startup_cpu_irq,
-	shutdown_cpu_irq,
-	enable_cpu_irq,
-	disable_cpu_irq,
-	mask_and_ack_cpu_irq,
-	end_cpu_irq,
-	NULL
-};
-
-/*
- * This is for pure CRIME interrupts - ie not MACE.  The advantage?
- * We get to split the register in half and do faster lookups.
- */
-
-static void enable_crime_irq(unsigned int irq)
-{
-	u64 crime_mask;
-	unsigned long flags;
-
-	save_and_cli(flags);
-	crime_mask = crime_read_64(CRIME_INT_MASK);
-	crime_mask |= 1 << (irq - 1);
-	crime_write_64(CRIME_INT_MASK, crime_mask);
-	restore_flags(flags);
-}
-
-static unsigned int startup_crime_irq(unsigned int irq)
-{
-	enable_crime_irq(irq);
-	return 0; /* This is probably not right; we could have pending irqs */
-}
-
-static void disable_crime_irq(unsigned int irq)
-{
-	u64 crime_mask;
-	unsigned long flags;
-
-	save_and_cli(flags);
-	crime_mask = crime_read_64(CRIME_INT_MASK);
-	crime_mask &= ~(1 << (irq - 1));
-	crime_write_64(CRIME_INT_MASK, crime_mask);
-	restore_flags(flags);
-}
-
-static void mask_and_ack_crime_irq (unsigned int irq)
-{
-	u64 crime_mask;
-	unsigned long flags;
-
-	/* Edge triggered interrupts must be cleared. */
-	if ((irq >= CRIME_GBE0_IRQ && irq <= CRIME_GBE3_IRQ)
-	    || (irq >= CRIME_RE_EMPTY_E_IRQ && irq <= CRIME_RE_IDLE_E_IRQ)
-	    || (irq >= CRIME_SOFT0_IRQ && irq <= CRIME_SOFT2_IRQ)) {
-		save_and_cli(flags);
-		crime_mask = crime_read_64(CRIME_HARD_INT);
-		crime_mask &= ~(1 << (irq - 1));
-		crime_write_64(CRIME_HARD_INT, crime_mask);
-		restore_flags(flags);
-	}
-	disable_crime_irq(irq);
-}
-
-static void end_crime_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_crime_irq (irq);
-}
-
-#define shutdown_crime_irq disable_crime_irq
-
-static struct hw_interrupt_type ip32_crime_interrupt = {
-	"IP32 CRIME",
-	startup_crime_irq,
-	shutdown_crime_irq,
-	enable_crime_irq,
-	disable_crime_irq,
-	mask_and_ack_crime_irq,
-	end_crime_irq,
-	NULL
-};
-
-/*
- * This is for MACE PCI interrupts.  We can decrease bus traffic by masking
- * as close to the source as possible.  This also means we can take the
- * next chunk of the CRIME register in one piece.
- */
-
-static void enable_macepci_irq(unsigned int irq)
-{
-	u32 mace_mask;
-	u64 crime_mask;
-	unsigned long flags;
-
-	save_and_cli(flags);
-	mace_mask = mace_read_32(MACEPCI_CONTROL);
-	mace_mask |= MACEPCI_CONTROL_INT(irq - 9);
-	mace_write_32(MACEPCI_CONTROL, mace_mask);
-	/*
-	 * In case the CRIME interrupt isn't enabled, we must enable it;
-	 * however, we never disable interrupts at that level.
-	 */
-	crime_mask = crime_read_64(CRIME_INT_MASK);
-	crime_mask |= 1 << (irq - 1);
-	crime_write_64(CRIME_INT_MASK, crime_mask);
-	restore_flags(flags);
-}
-
-static unsigned int startup_macepci_irq(unsigned int irq)
-{
-	enable_macepci_irq (irq);
-
-	return 0; /* XXX */
-}
-
-static void disable_macepci_irq(unsigned int irq)
-{
-	u32 mace_mask;
-	unsigned long flags;
-
-	save_and_cli(flags);
-	mace_mask = mace_read_32(MACEPCI_CONTROL);
-	mace_mask &= ~MACEPCI_CONTROL_INT(irq - 9);
-	mace_write_32(MACEPCI_CONTROL, mace_mask);
-	restore_flags(flags);
-}
-
-static void end_macepci_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_macepci_irq (irq);
-}
-
-#define shutdown_macepci_irq disable_macepci_irq
-#define mask_and_ack_macepci_irq disable_macepci_irq
-
-static struct hw_interrupt_type ip32_macepci_interrupt = {
-	"IP32 MACE PCI",
-	startup_macepci_irq,
-	shutdown_macepci_irq,
-	enable_macepci_irq,
-	disable_macepci_irq,
-	mask_and_ack_macepci_irq,
-	end_macepci_irq,
-	NULL
-};
-
-/* This is used for MACE ISA interrupts.  That means bits 4-6 in the
- * CRIME register.
- */
-
-static void enable_maceisa_irq (unsigned int irq)
-{
-	u64 crime_mask;
-	u32 mace_mask;
-	unsigned int crime_int = 0;
-	unsigned long flags;
-
-	DBG ("maceisa enable: %u\n", irq);
-
-	switch (irq) {
-	case MACEISA_AUDIO_SW_IRQ ... MACEISA_AUDIO3_MERR_IRQ:
-		crime_int = MACE_AUDIO_INT;
-		break;
-	case MACEISA_RTC_IRQ ... MACEISA_TIMER2_IRQ:
-		crime_int = MACE_MISC_INT;
-		break;
-	case MACEISA_PARALLEL_IRQ ... MACEISA_SERIAL2_RDMAOR_IRQ:
-		crime_int = MACE_SUPERIO_INT;
-		break;
-	}
-	DBG ("crime_int %016lx enabled\n", crime_int);
-	save_and_cli(flags);
-	crime_mask = crime_read_64(CRIME_INT_MASK);
-	crime_mask |= crime_int;
-	crime_write_64(CRIME_INT_MASK, crime_mask);
-	mace_mask = mace_read_32(MACEISA_INT_MASK);
-	mace_mask |= 1 << (irq - 33);
-	mace_write_32(MACEISA_INT_MASK, mace_mask);
-	restore_flags(flags);
-}
-
-static unsigned int startup_maceisa_irq (unsigned int irq)
-{
-	enable_maceisa_irq(irq);
-	return 0;
-}
-
-static void disable_maceisa_irq(unsigned int irq)
-{
-	u32 mace_mask;
-	unsigned long flags;
-
-	save_and_cli (flags);
-	mace_mask = mace_read_32(MACEISA_INT_MASK);
-	mace_mask &= ~(1 << (irq - 33));
-	mace_write_32(MACEISA_INT_MASK, mace_mask);
-	restore_flags(flags);
-}
-
-static void mask_and_ack_maceisa_irq(unsigned int irq)
-{
-	u32 mace_mask;
-	unsigned long flags;
-
-	switch (irq) {
-	case MACEISA_PARALLEL_IRQ:
-	case MACEISA_SERIAL1_TDMAPR_IRQ:
-	case MACEISA_SERIAL2_TDMAPR_IRQ:
-		save_and_cli(flags);
-		mace_mask = mace_read_32(MACEISA_INT_STAT);
-		mace_mask &= ~(1 << (irq - 33));
-		mace_write_32(MACEISA_INT_STAT, mace_mask);
-		restore_flags(flags);
-		break;
-	}
-	disable_maceisa_irq(irq);
-}
-
-static void end_maceisa_irq(unsigned irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_maceisa_irq (irq);
-}
-
-#define shutdown_maceisa_irq disable_maceisa_irq
-
-static struct hw_interrupt_type ip32_maceisa_interrupt = {
-	"IP32 MACE ISA",
-	startup_maceisa_irq,
-	shutdown_maceisa_irq,
-	enable_maceisa_irq,
-	disable_maceisa_irq,
-	mask_and_ack_maceisa_irq,
-	end_maceisa_irq,
-	NULL
-};
-
-/* This is used for regular non-ISA, non-PCI MACE interrupts.  That means
- * bits 0-3 and 7 in the CRIME register.
- */
-
-static void enable_mace_irq(unsigned int irq)
-{
-	u64 crime_mask;
-	unsigned long flags;
-
-	save_and_cli (flags);
-	crime_mask = crime_read_64 (CRIME_INT_MASK);
-	crime_mask |= 1 << (irq - 1);
-	crime_write_64 (CRIME_INT_MASK, crime_mask);
-	restore_flags (flags);
-}
-
-static unsigned int startup_mace_irq(unsigned int irq)
-{
-	enable_mace_irq(irq);
-	return 0;
-}
-
-static void disable_mace_irq(unsigned int irq)
-{
-	u64 crime_mask;
-	unsigned long flags;
-
-	save_and_cli (flags);
-	crime_mask = crime_read_64 (CRIME_INT_MASK);
-	crime_mask &= ~(1 << (irq - 1));
-	crime_write_64 (CRIME_INT_MASK, crime_mask);
-	restore_flags(flags);
-}
-
-static void end_mace_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_mace_irq (irq);
-}
-
-#define shutdown_mace_irq disable_mace_irq
-#define mask_and_ack_mace_irq disable_mace_irq
-
-static struct hw_interrupt_type ip32_mace_interrupt = {
-	"IP32 MACE",
-	startup_mace_irq,
-	shutdown_mace_irq,
-	enable_mace_irq,
-	disable_mace_irq,
-	mask_and_ack_mace_irq,
-	end_mace_irq,
-	NULL
-};
-
-static void ip32_unknown_interrupt (struct pt_regs *regs)
-{
-	u64 crime;
-	u32 mace;
-
-	printk ("Unknown interrupt occurred!\n");
-	printk ("cp0_status: %08x\tcp0_cause: %08x\n",
-		read_32bit_cp0_register (CP0_STATUS),
-		read_32bit_cp0_register (CP0_CAUSE));
-	crime = crime_read_64 (CRIME_INT_MASK);
-	printk ("CRIME interrupt mask: %016lx\n", crime);
-	crime = crime_read_64 (CRIME_INT_STAT);
-	printk ("CRIME interrupt status: %016lx\n", crime);
-	crime = crime_read_64 (CRIME_HARD_INT);
-	printk ("CRIME hardware interrupt register: %016lx\n", crime);
-	mace = mace_read_32 (MACEISA_INT_MASK);
-	printk ("MACE ISA interrupt mask: %08x\n", mace);
-	mace = mace_read_32 (MACEISA_INT_STAT);
-	printk ("MACE ISA interrupt status: %08x\n", mace);
-	mace = mace_read_32 (MACEPCI_CONTROL);
-	printk ("MACE PCI control register: %08x\n", mace);
-
-	printk("Register dump:\n");
-	show_regs(regs);
-
-	printk("Please mail this report to linux-mips@oss.sgi.com\n");
-	printk("Spinning...");
-	while(1) ;
-}
-
-/* CRIME 1.1 appears to deliver all interrupts to this one pin. */
-void ip32_irq0(struct pt_regs *regs)
-{
-	u64 crime_int;
-	u64 crime_mask;
-	int irq = 0;
-	unsigned long flags;
-
-	save_and_cli (flags);
-	/* disable crime interrupts */
-	crime_mask = crime_read_64(CRIME_INT_MASK);
-	crime_write_64(CRIME_INT_MASK, 0);
-
-	crime_int = crime_read_64(CRIME_INT_STAT);
-
-	if (crime_int & CRIME_MACE_INT_MASK) {
-		crime_int &= CRIME_MACE_INT_MASK;
-		irq = ffs (crime_int);
-	} else if (crime_int & CRIME_MACEISA_INT_MASK) {
-		u32 mace_int;
-		mace_int = mace_read_32 (MACEISA_INT_STAT);
-		if (mace_int == 0)
-			irq = 0;
-		else
-			irq = ffs (mace_int) + 32;
-	} else if (crime_int & CRIME_MACEPCI_INT_MASK) {
-		crime_int &= CRIME_MACEPCI_INT_MASK;
-		crime_int >>= 8;
-		irq = ffs (crime_int) + 8;
-	} else if (crime_int & 0xffff0000) {
-		crime_int >>= 16;
-		irq = ffs (crime_int) + 16;
-	}
-	if (irq == 0)
-		ip32_unknown_interrupt(regs);
-	DBG("*irq %u*\n", irq);
-	do_IRQ(irq, regs);
-
-	/* enable crime interrupts */
-	crime_write_64(CRIME_INT_MASK, crime_mask);
-	restore_flags (flags);
-}
-
-void ip32_irq1(struct pt_regs *regs)
-{
-	ip32_unknown_interrupt (regs);
-}
-
-void ip32_irq2(struct pt_regs *regs)
-{
-	ip32_unknown_interrupt (regs);
-}
-
-void ip32_irq3(struct pt_regs *regs)
-{
-	ip32_unknown_interrupt (regs);
-}
-
-void ip32_irq4(struct pt_regs *regs)
-{
-	ip32_unknown_interrupt (regs);
-}
-
-void ip32_irq5(struct pt_regs *regs)
-{
-	do_IRQ (CLOCK_IRQ, regs);
-}
-
-void __init init_IRQ(void)
-{
-	unsigned int irq;
-	int i;
-
-	/* Install our interrupt handler, then clear and disable all
-	 * CRIME and MACE interrupts.
-	 */
-	crime_write_64(CRIME_INT_MASK, 0);
-	crime_write_64(CRIME_HARD_INT, 0);
-	crime_write_64(CRIME_SOFT_INT, 0);
-	mace_write_32(MACEISA_INT_STAT, 0);
-	mace_write_32(MACEISA_INT_MASK, 0);
-	set_except_vector(0, ip32_handle_int);
-
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc[i].status  = IRQ_DISABLED;
-		irq_desc[i].action  = NULL;
-		irq_desc[i].depth   = 1;
-		irq_desc[i].handler = &no_irq_type;
-	}
-
-	for (irq = 0; irq <= IP32_IRQ_MAX; irq++) {
-		hw_irq_controller *controller;
-
-		if (irq == CLOCK_IRQ)
-			controller = &ip32_cpu_interrupt;
-		else if (irq <= MACE_PCI_BRIDGE_IRQ && irq >= MACE_VID_IN1_IRQ)
-			controller = &ip32_mace_interrupt;
-		else if (irq <= MACEPCI_SHARED2_IRQ && irq >= MACEPCI_SCSI0_IRQ)
-			controller = &ip32_macepci_interrupt;
-		else if (irq <= CRIME_VICE_IRQ && irq >= CRIME_GBE0_IRQ)
-			controller = &ip32_crime_interrupt;
-		else
-			controller = &ip32_maceisa_interrupt;
-
-		irq_desc[irq].status = IRQ_DISABLED;
-		irq_desc[irq].action = 0;
-		irq_desc[irq].depth = 0;
-		irq_desc[irq].handler = controller;
-	}
-	setup_irq(CRIME_MEMERR_IRQ, &memerr_irq);
-	setup_irq(CRIME_CPUERR_IRQ, &cpuerr_irq);
-}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)