patch-2.4.22 linux-2.4.22/arch/sh/overdrive/overdrive.h

• Lines: 90
• Date: 2003-08-25 04:44:40.000000000 -0700
• Orig file: linux-2.4.21/arch/sh/overdrive/overdrive.h
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.21/arch/sh/overdrive/overdrive.h linux-2.4.22/arch/sh/overdrive/overdrive.h
@@ -0,0 +1,89 @@
+/* 
+ * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.                            
+ *
+ */
+
+#include <linux/config.h>
+
+#ifndef __OVERDRIVE_H__
+#define __OVERDRIVE_H__
+
+#define OVERDRIVE_INT_CT 0xa3a00000
+#define OVERDRIVE_INT_DT 0xa3b00000
+
+#define OVERDRIVE_CTRL    0xa3000000
+
+/* Shoving all these bits into the same register is not a good idea. 
+ * As soon as I get a spare moment, I'll change the FPGA and put each 
+ * bit in a separate register
+ */
+
+#define VALID_CTRL_BITS		          0x1f
+
+#define ENABLE_RS232_MASK	  	  0x1e
+#define DISABLE_RS232_BIT		  0x01
+
+#define ENABLE_NMI_MASK			  0x1d
+#define DISABLE_NMI_BIT			  0x02
+
+#define RESET_PCI_MASK			  0x1b
+#define ENABLE_PCI_BIT			  0x04
+
+#define ENABLE_LED_MASK			  0x17
+#define DISABLE_LED_BIT			  0x08
+
+#define RESET_FPGA_MASK			  0x0f
+#define ENABLE_FPGA_BIT			  0x10
+
+
+#define FPGA_DCLK_ADDRESS           0xA3C00000
+
+#define FPGA_DATA        0x01	/*   W */
+#define FPGA_CONFDONE    0x02	/* R   */
+#define FPGA_NOT_STATUS  0x04	/* R   */
+#define FPGA_INITDONE    0x08	/* R   */
+
+#define FPGA_TIMEOUT     100000
+
+
+/* Interrupts for the overdrive. Note that these numbers have 
+ * nothing to do with the actual IRQ numbers they appear on, 
+ * this is all programmable. This is simply the position in the 
+ * INT_CT register.
+ */
+
+#define OVERDRIVE_PCI_INTA              0
+#define OVERDRIVE_PCI_INTB              1
+#define OVERDRIVE_PCI_INTC              2
+#define OVERDRIVE_PCI_INTD              3
+#define OVERDRIVE_GALILEO_INT           4
+#define OVERDRIVE_GALILEO_LOCAL_INT     5
+#define OVERDRIVE_AUDIO_INT             6
+#define OVERDRIVE_KEYBOARD_INT          7
+
+/* Which Linux IRQ should we assign to each interrupt source? */
+#define OVERDRIVE_PCI_IRQ1              2
+#ifdef CONFIG_HACKED_NE2K
+#define OVERDRIVE_PCI_IRQ2              7
+#else
+#define OVERDRIVE_PCI_IRQ2              2
+#undef OVERDRIVE_PCI_INTB 
+#define OVERDRIVE_PCI_INTB OVERDRIVE_PCI_INTA
+
+#endif
+
+/* Put the ESS solo audio chip on IRQ 4 */
+#define OVERDRIVE_ESS_IRQ               4
+
+/* Where the memory behind the PCI bus appears */
+#define PCI_DRAM_BASE   0xb7000000
+#define PCI_DRAM_SIZE (16*1024*1024)
+#define PCI_DRAM_FINISH (PCI_DRAM_BASE+PCI_DRAM_SIZE-1)
+
+/* Where the IO region appears in the memory */
+#define PCI_GTIO_BASE   0xb8000000
+
+#endif