patch-2.4.22 linux-2.4.22/drivers/net/bonding/bonding.h

Next file: linux-2.4.22/drivers/net/bonding.c
Previous file: linux-2.4.22/drivers/net/bonding/bond_main.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/drivers/net/bonding/bonding.h linux-2.4.22/drivers/net/bonding/bonding.h
@@ -0,0 +1,181 @@
+/*
+ * Bond several ethernet interfaces into a Cisco, running 'Etherchannel'.
+ *
+ * Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
+ * NCM: Network and Communications Management, Inc.
+ *
+ * BUT, I'm the one who modified it for ethernet, so:
+ * (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov
+ *
+ *	This software may be used and distributed according to the terms
+ *	of the GNU Public License, incorporated herein by reference.
+ * 
+ *
+ * 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
+ *		Tsippy Mendelson <tsippy.mendelson at intel dot com> and
+ *		Shmulik Hen <shmulik.hen at intel dot com>
+ *	- Added support for IEEE 802.3ad Dynamic link aggregation mode.
+ *
+ * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
+ *		Amir Noam <amir.noam at intel dot com>
+ *	- Code beautification and style changes (mainly in comments).
+ *
+ * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
+ *	- Added support for Transmit load balancing mode.
+ */
+ 
+#ifndef _LINUX_BONDING_H
+#define _LINUX_BONDING_H
+
+#include <linux/timer.h>
+#include <linux/proc_fs.h>
+#include "bond_3ad.h"
+#include "bond_alb.h"
+
+#ifdef BONDING_DEBUG
+
+// use this like so: BOND_PRINT_DBG(("foo = %d, bar = %d", foo, bar));
+#define BOND_PRINT_DBG(X)                                     \
+do {                                                          \
+	printk(KERN_DEBUG "%s (%d)", __FUNCTION__, __LINE__); \
+	printk X;                                             \
+	printk("\n");                                         \
+} while(0)
+
+#else
+#define BOND_PRINT_DBG(X)
+#endif /* BONDING_DEBUG */
+
+#define IS_UP(dev)  ((((dev)->flags & (IFF_UP)) == (IFF_UP)) && \
+		     (netif_running(dev) && netif_carrier_ok(dev)))
+
+/* Checks whether the dev is ready for transmit. We do not check netif_running
+ * since a device can be stopped by the driver for short periods of time for
+ * maintainance. dev_queue_xmit() handles this by queing the packet until the
+ * the dev is running again. Keeping packets ordering requires sticking the
+ * same dev as much as possible
+ */
+#define SLAVE_IS_OK(slave) \
+		     ((((slave)->dev->flags & (IFF_UP)) == (IFF_UP)) && \
+		     netif_carrier_ok((slave)->dev) && \
+		     ((slave)->link == BOND_LINK_UP) && \
+		     ((slave)->state == BOND_STATE_ACTIVE))
+
+
+typedef struct slave {
+	struct slave *next;
+	struct slave *prev;
+	struct net_device *dev;
+	short  delay;
+	unsigned long jiffies;
+	char   link;    /* one of BOND_LINK_XXXX */
+	char   state;   /* one of BOND_STATE_XXXX */
+	unsigned short original_flags;
+	u32 link_failure_count;
+	u16    speed;
+	u8     duplex;
+	u8     perm_hwaddr[ETH_ALEN];
+	struct ad_slave_info ad_info; /* HUGE - better to dynamically alloc */
+	struct tlb_slave_info tlb_info;
+} slave_t;
+
+/*
+ * Here are the locking policies for the two bonding locks:
+ *
+ * 1) Get bond->lock when reading/writing slave list.
+ * 2) Get bond->ptrlock when reading/writing bond->current_slave.
+ *    (It is unnecessary when the write-lock is put with bond->lock.)
+ * 3) When we lock with bond->ptrlock, we must lock with bond->lock
+ *    beforehand.
+ */
+typedef struct bonding {
+	slave_t *next;
+	slave_t *prev;
+	slave_t *current_slave;
+	slave_t *primary_slave;
+	slave_t *current_arp_slave;
+	__s32 slave_cnt;
+	rwlock_t lock;
+	rwlock_t ptrlock;
+	struct timer_list mii_timer;
+	struct timer_list arp_timer;
+	struct net_device_stats *stats;
+#ifdef CONFIG_PROC_FS
+	struct proc_dir_entry *bond_proc_dir;
+	struct proc_dir_entry *bond_proc_info_file;
+#endif /* CONFIG_PROC_FS */
+	struct bonding *next_bond;
+	struct net_device *device;
+	struct dev_mc_list *mc_list;
+	unsigned short flags;
+	struct ad_bond_info ad_info;
+	struct alb_bond_info alb_info;
+} bonding_t;
+
+/* Forward declarations */
+void bond_set_slave_active_flags(slave_t *slave);
+void bond_set_slave_inactive_flags(slave_t *slave);
+
+/**
+ * These functions can be used for iterating the slave list
+ * (which is circular)
+ * Caller must hold bond lock for read
+ */
+extern inline struct slave*
+bond_get_first_slave(struct bonding *bond)
+{
+	/* if there are no slaves return NULL */
+	if (bond->next == (slave_t *)bond) {
+		return NULL;
+	}
+	return bond->next;
+}
+
+/**
+ * Caller must hold bond lock for read
+ */
+extern inline struct slave*
+bond_get_next_slave(struct bonding *bond, struct slave *slave)
+{
+	/* If we have reached the last slave return NULL */
+	if (slave->next == bond->next) {
+		return NULL;
+	}
+	return slave->next;
+}
+
+/**
+ * Returns NULL if the net_device does not belong to any of the bond's slaves
+ *
+ * Caller must hold bond lock for read
+ */
+extern inline struct slave*
+bond_get_slave_by_dev(struct bonding *bond, struct net_device *slave_dev)
+{
+	struct slave *our_slave = bond->next;
+
+	/* check if the list of slaves is empty */
+	if (our_slave == (slave_t *)bond) {
+		return NULL;
+	}
+
+	for (; our_slave; our_slave = bond_get_next_slave(bond, our_slave)) {
+		if (our_slave->dev == slave_dev) {
+			break;
+		}
+	}
+	return our_slave;
+}
+
+extern inline struct bonding*
+bond_get_bond_by_slave(struct slave *slave)
+{
+	if (!slave || !slave->dev->master) {
+		return NULL;
+	}
+
+	return (struct bonding *)(slave->dev->master->priv);
+}
+
+#endif /* _LINUX_BONDING_H */
+

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)