patch-2.4.25 linux-2.4.25/arch/mips/momentum/jaguar_atx/setup.c

• Lines: 363
• Date: 2004-02-18 05:36:30.000000000 -0800
• Orig file: linux-2.4.24/arch/mips/momentum/jaguar_atx/setup.c
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.24/arch/mips/momentum/jaguar_atx/setup.c linux-2.4.25/arch/mips/momentum/jaguar_atx/setup.c
@@ -0,0 +1,362 @@
+/*
+ * setup.c
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Momentum Computer Jaguar-ATX board dependent boot routines
+ *
+ * Copyright (C) 1996, 1997, 2001  Ralf Baechle
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Copyright (C) 2001 Red Hat, Inc.
+ * Copyright (C) 2002 Momentum Computer
+ *
+ * Author: Matthew Dharm, Momentum Computer
+ *   mdharm@momenco.com
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ *   hamilton@redhat.com  [MIPS64 modifications]
+ *
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mc146818rtc.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/timex.h>
+#include <linux/vmalloc.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <asm/mc146818rtc.h>
+#include <linux/version.h>
+#include <linux/bootmem.h>
+#include <linux/blk.h>
+#include <asm/mv64340.h>
+#include "jaguar_atx_fpga.h"
+
+
+unsigned long mv64340_base;
+extern unsigned long mv64340_sram_base;
+unsigned long cpu_clock;
+
+/* These functions are used for rebooting or halting the machine*/
+extern void momenco_jaguar_restart(char *command);
+extern void momenco_jaguar_halt(void);
+extern void momenco_jaguar_power_off(void);
+
+void momenco_time_init(void);
+
+static char reset_reason;
+
+#define ENTRYLO(x) ((pte_val(mk_pte_phys((x), PAGE_KERNEL_UNCACHED)) >> 6)|1)
+
+void __init bus_error_init(void) { /* nothing */ }
+
+/* setup code for a handoff from a version 2 PMON 2000 PROM */
+void PMON_v2_setup(void)
+{
+	/* Some wired TLB entries for the MV64340 and perhiperals. The
+	   MV64340 is going to be hit on every IRQ anyway - there's
+	   absolutely no point in letting it be a random TLB entry, as
+	   it'll just cause needless churning of the TLB. And we use
+	   the other half for the serial port, which is just a PITA
+	   otherwise :)
+
+		Device			Physical	Virtual
+		MV64340 Internal Regs	0xf4000000	0xf4000000
+		Ocelot-C[S] PLD (CS0)	0xfc000000	0xfc000000
+		NVRAM (CS1)		0xfc800000	0xfc800000
+		UARTs (CS2)		0xfd000000	0xfd000000
+		Internal SRAM		0xfe000000	0xfe000000
+		M-Systems DOC (CS3)	0xff000000	0xff000000
+	*/
+  printk("PMON_v2_setup\n");
+
+#ifdef CONFIG_MIPS64
+	/* marvell and extra space */
+	add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xfffffffff4000000, PM_64K);
+	/* fpga, rtc, and uart */
+	add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), 0xfffffffffc000000, PM_16M);
+	/* m-sys and internal SRAM */
+	add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfffffffffe000000, PM_16M);
+
+	mv64340_base = 0xfffffffff4000000;
+	mv64340_sram_base = 0xfffffffffe000000;
+#else
+	/* marvell and extra space */
+	add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xf4000000, PM_64K);
+	/* fpga, rtc, and uart */
+	add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), 0xfc000000, PM_16M);
+	/* m-sys and internal SRAM */
+	add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfe000000, PM_16M);
+
+	mv64340_base = 0xf4000000;
+	mv64340_sram_base = 0xfe000000;
+#endif
+}
+
+#define CONV_BCD_TO_BIN(val)	(((val) & 0xf) + (((val) >> 4) * 10))
+#define CONV_BIN_TO_BCD(val)	(((val) % 10) + (((val) / 10) << 4))
+
+unsigned long m48t37y_get_time(void)
+{
+#ifdef CONFIG_MIPS64
+	unsigned char *rtc_base = (unsigned char*)0xfffffffffc800000;
+#else
+	unsigned char *rtc_base = (unsigned char*)0xfc800000;
+#endif
+	unsigned int year, month, day, hour, min, sec;
+
+	/* stop the update */
+	rtc_base[0x7ff8] = 0x40;
+
+	year = CONV_BCD_TO_BIN(rtc_base[0x7fff]);
+	year += CONV_BCD_TO_BIN(rtc_base[0x7ff1]) * 100;
+
+	month = CONV_BCD_TO_BIN(rtc_base[0x7ffe]);
+
+	day = CONV_BCD_TO_BIN(rtc_base[0x7ffd]);
+
+	hour = CONV_BCD_TO_BIN(rtc_base[0x7ffb]);
+	min = CONV_BCD_TO_BIN(rtc_base[0x7ffa]);
+	sec = CONV_BCD_TO_BIN(rtc_base[0x7ff9]);
+
+	/* start the update */
+	rtc_base[0x7ff8] = 0x00;
+
+	return mktime(year, month, day, hour, min, sec);
+}
+
+int m48t37y_set_time(unsigned long sec)
+{
+#ifdef CONFIG_MIPS64
+	unsigned char *rtc_base = (unsigned char*)0xfffffffffc800000;
+#else
+	unsigned char *rtc_base = (unsigned char*)0xfc800000;
+#endif
+	struct rtc_time tm;
+
+	/* convert to a more useful format -- note months count from 0 */
+	to_tm(sec, &tm);
+	tm.tm_mon += 1;
+
+	/* enable writing */
+	rtc_base[0x7ff8] = 0x80;
+
+	/* year */
+	rtc_base[0x7fff] = CONV_BIN_TO_BCD(tm.tm_year % 100);
+	rtc_base[0x7ff1] = CONV_BIN_TO_BCD(tm.tm_year / 100);
+
+	/* month */
+	rtc_base[0x7ffe] = CONV_BIN_TO_BCD(tm.tm_mon);
+
+	/* day */
+	rtc_base[0x7ffd] = CONV_BIN_TO_BCD(tm.tm_mday);
+
+	/* hour/min/sec */
+	rtc_base[0x7ffb] = CONV_BIN_TO_BCD(tm.tm_hour);
+	rtc_base[0x7ffa] = CONV_BIN_TO_BCD(tm.tm_min);
+	rtc_base[0x7ff9] = CONV_BIN_TO_BCD(tm.tm_sec);
+
+	/* day of week -- not really used, but let's keep it up-to-date */
+	rtc_base[0x7ffc] = CONV_BIN_TO_BCD(tm.tm_wday + 1);
+
+	/* disable writing */
+	rtc_base[0x7ff8] = 0x00;
+
+	return 0;
+}
+
+void momenco_timer_setup(struct irqaction *irq)
+{
+	setup_irq(8, irq);
+}
+
+void momenco_time_init(void)
+{
+	mips_hpt_frequency = cpu_clock / 2;
+	board_timer_setup = momenco_timer_setup;
+
+	rtc_get_time = m48t37y_get_time;
+	rtc_set_time = m48t37y_set_time;
+}
+
+void __init momenco_jaguar_atx_setup(void)
+{
+	unsigned int tmpword;
+
+	board_time_init = momenco_time_init;
+
+	_machine_restart = momenco_jaguar_restart;
+	_machine_halt = momenco_jaguar_halt;
+	_machine_power_off = momenco_jaguar_power_off;
+
+	/*
+	 * initrd_start = (ulong)jaguar_initrd_start;
+	 * initrd_end = (ulong)jaguar_initrd_start + (ulong)jaguar_initrd_size;
+	 * initrd_below_start_ok = 1;
+	 */
+
+	/* do handoff reconfiguration */
+	PMON_v2_setup();
+
+	/* shut down ethernet ports, just to be sure our memory doesn't get
+	 * corrupted by random ethernet traffic.
+	 */
+	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
+	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
+	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8);
+	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
+	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
+	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8);
+	do {}
+	  while (MV_READ_DATA(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
+	do {}
+	  while (MV_READ_DATA(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
+	do {}
+	  while (MV_READ_DATA(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff);
+	do {}
+	  while (MV_READ_DATA(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
+	do {}
+	  while (MV_READ_DATA(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
+	do {}
+	  while (MV_READ_DATA(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff);
+	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0), MV_READ_DATA(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
+	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1), MV_READ_DATA(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
+	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(2), MV_READ_DATA(MV64340_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1);
+
+	/* Turn off the Bit-Error LED */
+	JAGUAR_FPGA_WRITE(0x80, CLR);
+
+	tmpword = JAGUAR_FPGA_READ(BOARDREV);
+	if (tmpword < 26)
+		printk("Momentum Jaguar-ATX: Board Assembly Rev. %c\n",
+			'A'+tmpword);
+	else
+		printk("Momentum Jaguar-ATX: Board Assembly Revision #0x%x\n",
+			tmpword);
+
+	tmpword = JAGUAR_FPGA_READ(FPGA_REV);
+	printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15);
+	tmpword = JAGUAR_FPGA_READ(RESET_STATUS);
+	printk("Reset reason: 0x%x\n", tmpword);
+	switch (tmpword) {
+		case 0x1:
+			printk("  - Power-up reset\n");
+			break;
+		case 0x2:
+			printk("  - Push-button reset\n");
+			break;
+		case 0x8:
+			printk("  - Watchdog reset\n");
+			break;
+		case 0x10:
+			printk("  - JTAG reset\n");
+			break;
+		default:
+			printk("  - Unknown reset cause\n");
+	}
+	reset_reason = tmpword;
+	JAGUAR_FPGA_WRITE(0xff, RESET_STATUS);
+
+	tmpword = JAGUAR_FPGA_READ(BOARD_STATUS);
+	printk("Board Status register: 0x%02x\n", tmpword);
+	printk("  - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
+	printk("  - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
+
+	/* 256MiB of RM9000x2 DDR */
+//	add_memory_region(0x0, 0x100<<20, BOOT_MEM_RAM);
+
+	/* 128MiB of MV-64340 DDR */
+//	add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM);
+
+	/* XXX Memory configuration should be picked up from PMON2k */
+#ifdef CONFIG_JAGUAR_DMALOW
+	printk("Jaguar ATX DMA-low mode set\n");
+	add_memory_region(0x00000000, 0x08000000, BOOT_MEM_RAM);
+	add_memory_region(0x08000000, 0x10000000, BOOT_MEM_RAM);
+#else
+	/* 128MiB of MV-64340 DDR RAM */
+	printk("Jaguar ATX DMA-low mode is not set\n");
+	add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM);
+#endif
+
+#ifdef GEMDEBUG_TRACEBUFFER
+	{
+	  unsigned int tbControl;
+	  tbControl = 
+	    0 << 26 |  /* post trigger delay 0 */
+	    	    0x2 << 16 |		/* sequential trace mode */
+	    //	    0x0 << 16 |		/* non-sequential trace mode */
+	    //	    0xf << 4 |		/* watchpoints disabled */
+	    2 << 2 |		/* armed */
+	    2 ;			/* interrupt disabled  */
+	  printk ("setting     tbControl = %08lx\n", tbControl);
+	  write_32bit_cp0_set1_register($22, tbControl);
+	  __asm__ __volatile__(".set noreorder\n\t" \
+			       "nop; nop; nop; nop; nop; nop;\n\t" \
+			       "nop; nop; nop; nop; nop; nop;\n\t" \
+			       ".set reorder\n\t");
+
+	}
+#endif
+}
+
+
+#ifndef CONFIG_MIPS64
+/* This needs to be one of the first initcalls, because no I/O port access
+   can work before this */
+static int io_base_ioremap(void)
+{
+	/* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */
+	void *io_remap_range = ioremap(0xc0000000, 0x30000000);
+
+	printk("*** io_base_ioremap\n");
+	if (!io_remap_range) {
+		panic("Could not ioremap I/O port range");
+	}
+	printk("io_remap_range set at 0x%08x\n", (uint32_t)io_remap_range);
+	set_io_port_base(io_remap_range - 0xc0000000);
+
+	return 0;
+}
+
+module_init(io_base_ioremap);
+#endif