patch-2.4.25 linux-2.4.25/drivers/i2c/i2c-algo-bit.c

• Lines: 176
• Date: 2004-02-18 05:36:31.000000000 -0800
• Orig file: linux-2.4.24/drivers/i2c/i2c-algo-bit.c
• Orig date: 2003-08-25 04:44:41.000000000 -0700

diff -urN linux-2.4.24/drivers/i2c/i2c-algo-bit.c linux-2.4.25/drivers/i2c/i2c-algo-bit.c
@@ -27,7 +27,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <asm/uaccess.h>
 #include <linux/ioport.h>
@@ -123,7 +122,7 @@
 		if (current->need_resched)
 			schedule();
 	}
-	DEBSTAT(printk("needed %ld jiffies\n", jiffies-start));
+	DEBSTAT(printk(KERN_DEBUG "needed %ld jiffies\n", jiffies-start));
 #ifdef SLO_IO
 	SLO_IO
 #endif
@@ -179,12 +178,12 @@
 	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
 
 	/* assert: scl is low */
-	DEB2(printk(" i2c_outb:%2.2X\n",c&0xff));
+	DEB2(printk(KERN_DEBUG " i2c_outb:%2.2X\n",c&0xff));
 	for ( i=7 ; i>=0 ; i-- ) {
 		sb = c & ( 1 << i );
 		setsda(adap,sb);
 		udelay(adap->udelay);
-		DEBPROTO(printk("%d",sb!=0));
+		DEBPROTO(printk(KERN_DEBUG "%d",sb!=0));
 		if (sclhi(adap)<0) { /* timed out */
 			sdahi(adap); /* we don't want to block the net */
 			return -ETIMEDOUT;
@@ -201,10 +200,10 @@
 	};
 	/* read ack: SDA should be pulled down by slave */
 	ack=getsda(adap);	/* ack: sda is pulled low ->success.	 */
-	DEB2(printk(" i2c_outb: getsda() =  0x%2.2x\n", ~ack ));
+	DEB2(printk(KERN_DEBUG " i2c_outb: getsda() =  0x%2.2x\n", ~ack ));
 
-	DEBPROTO( printk("[%2.2x]",c&0xff) );
-	DEBPROTO(if (0==ack){ printk(" A ");} else printk(" NA ") );
+	DEBPROTO( printk(KERN_DEBUG "[%2.2x]",c&0xff) );
+	DEBPROTO(if (0==ack){ printk(KERN_DEBUG " A ");} else printk(KERN_DEBUG " NA ") );
 	scllo(adap);
 	return 0==ack;		/* return 1 if device acked	 */
 	/* assert: scl is low (sda undef) */
@@ -220,7 +219,7 @@
 	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
 
 	/* assert: scl is low */
-	DEB2(printk("i2c_inb.\n"));
+	DEB2(printk(KERN_DEBUG "i2c_inb.\n"));
 
 	sdahi(adap);
 	for (i=0;i<8;i++) {
@@ -233,7 +232,7 @@
 		scllo(adap);
 	}
 	/* assert: scl is low */
-	DEBPROTO(printk(" %2.2x", indata & 0xff));
+	DEBPROTO(printk(KERN_DEBUG " 0x%02x", indata & 0xff));
 	return (int) (indata & 0xff);
 }
 
@@ -341,7 +340,7 @@
 		i2c_start(adap);
 		udelay(adap->udelay);
 	}
-	DEB2(if (i) printk("i2c-algo-bit.o: needed %d retries for %d\n",
+	DEB2(if (i) printk(KERN_DEBUG "i2c-algo-bit.o: needed %d retries for %d\n",
 	                   i,addr));
 	return ret;
 }
@@ -356,7 +355,7 @@
 
 	while (count > 0) {
 		c = *temp;
-		DEB2(printk("i2c-algo-bit.o: %s i2c_write: writing %2.2X\n",
+		DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: %s sendbytes: writing %2.2X\n",
 			    i2c_adap->name, c&0xff));
 		retval = i2c_outb(i2c_adap,c);
 		if (retval>0) {
@@ -364,7 +363,7 @@
 			temp++;
 			wrcount++;
 		} else { /* arbitration or no acknowledge */
-			printk("i2c-algo-bit.o: %s i2c_write: error - bailout.\n",
+			printk(KERN_ERR "i2c-algo-bit.o: %s sendbytes: error - bailout.\n",
 			       i2c_adap->name);
 			i2c_stop(adap);
 			return (retval<0)? retval : -EFAULT;
@@ -392,7 +391,7 @@
 			*temp = inval;
 			rdcount++;
 		} else {   /* read timed out */
-			printk("i2c-algo-bit.o: i2c_read: i2c_inb timed out.\n");
+			printk(KERN_ERR "i2c-algo-bit.o: readbytes: i2c_inb timed out.\n");
 			break;
 		}
 
@@ -405,7 +404,7 @@
 		}
 		if (sclhi(adap)<0) {	/* timeout */
 			sdahi(adap);
-			printk("i2c-algo-bit.o: i2c_read: Timeout at ack\n");
+			printk(KERN_ERR "i2c-algo-bit.o: readbytes: Timeout at ack\n");
 			return -ETIMEDOUT;
 		};
 		scllo(adap);
@@ -435,18 +434,18 @@
 	if ( (flags & I2C_M_TEN)  ) { 
 		/* a ten bit address */
 		addr = 0xf0 | (( msg->addr >> 7) & 0x03);
-		DEB2(printk("addr0: %d\n",addr));
+		DEB2(printk(KERN_DEBUG "addr0: %d\n",addr));
 		/* try extended address code...*/
 		ret = try_address(i2c_adap, addr, retries);
 		if (ret!=1) {
-			printk("died at extended address code.\n");
+			printk(KERN_ERR "died at extended address code.\n");
 			return -EREMOTEIO;
 		}
 		/* the remaining 8 bit address */
 		ret = i2c_outb(i2c_adap,msg->addr & 0x7f);
 		if (ret != 1) {
 			/* the chip did not ack / xmission error occurred */
-			printk("died at 2nd address code.\n");
+			printk(KERN_ERR "died at 2nd address code.\n");
 			return -EREMOTEIO;
 		}
 		if ( flags & I2C_M_RD ) {
@@ -455,7 +454,7 @@
 			addr |= 0x01;
 			ret = try_address(i2c_adap, addr, retries);
 			if (ret!=1) {
-				printk("died at extended address code.\n");
+				printk(KERN_ERR "died at extended address code.\n");
 				return -EREMOTEIO;
 			}
 		}
@@ -490,22 +489,22 @@
 			}
 			ret = bit_doAddress(i2c_adap,pmsg,i2c_adap->retries);
 			if (ret != 0) {
-				DEB2(printk("i2c-algo-bit.o: NAK from device adr %#2x msg #%d\n"
-				       ,msgs[i].addr,i));
+				DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: NAK from device addr %2.2x msg #%d\n",
+					msgs[i].addr,i));
 				return (ret<0) ? ret : -EREMOTEIO;
 			}
 		}
 		if (pmsg->flags & I2C_M_RD ) {
 			/* read bytes into buffer*/
 			ret = readbytes(i2c_adap,pmsg->buf,pmsg->len);
-			DEB2(printk("i2c-algo-bit.o: read %d bytes.\n",ret));
+			DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: read %d bytes.\n",ret));
 			if (ret < pmsg->len ) {
 				return (ret<0)? ret : -EREMOTEIO;
 			}
 		} else {
 			/* write bytes from buffer */
 			ret = sendbytes(i2c_adap,pmsg->buf,pmsg->len);
-			DEB2(printk("i2c-algo-bit.o: wrote %d bytes.\n",ret));
+			DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: wrote %d bytes.\n",ret));
 			if (ret < pmsg->len ) {
 				return (ret<0) ? ret : -EREMOTEIO;
 			}
@@ -555,7 +554,7 @@
 			return -ENODEV;
 	}
 
-	DEB2(printk("i2c-algo-bit.o: hw routines for %s registered.\n",
+	DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: hw routines for %s registered.\n",
 	            adap->name));
 
 	/* register new adapter to i2c module... */