patch-2.4.25 linux-2.4.25/drivers/net/wan/pc300.h

• Lines: 425
• Date: 2004-02-18 05:36:31.000000000 -0800
• Orig file: linux-2.4.24/drivers/net/wan/pc300.h
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.24/drivers/net/wan/pc300.h linux-2.4.25/drivers/net/wan/pc300.h
@@ -0,0 +1,424 @@
+/*
+ * pc300.h	Cyclades-PC300(tm) Kernel API Definitions.
+ *
+ * Author:	Ivan Passos <ivan.passos@cyclades.com>
+ *
+ * Copyright:	(c) 1999-2003 Cyclades Corp.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef	_PC300_H
+#define	_PC300_H
+
+#ifndef __HDLC_H
+#include <linux/hdlc.h>
+#endif
+
+#ifndef _HD64572_H
+#include "hd64572.h"
+#endif
+#ifndef _FALC_LH_H
+#include "pc300_falc-lh.h"
+#endif
+
+#ifndef CY_TYPES
+#define CY_TYPES
+#if defined(__alpha__)
+typedef	unsigned long	ucdouble;	/* 64 bits, unsigned */
+typedef	unsigned int	uclong;		/* 32 bits, unsigned */
+#else
+typedef	unsigned long	uclong;		/* 32 bits, unsigned */
+#endif
+typedef	unsigned short	ucshort;	/* 16 bits, unsigned */
+typedef	unsigned char	ucchar;		/* 8 bits, unsigned */
+#endif /* CY_TYPES */
+
+#define PC300_PROTO_MLPPP 1		
+
+#define PC300_KERNEL	"2.4.x"	/* Kernel supported by this driver */
+
+#define	PC300_DEVNAME	"hdlc"	/* Dev. name base (for hdlc0, hdlc1, etc.) */
+#define PC300_MAXINDEX	100	/* Max dev. name index (the '0' in hdlc0) */
+
+#define	PC300_MAXCARDS	4	/* Max number of cards per system */
+#define	PC300_MAXCHAN	2	/* Number of channels per card */
+
+#define	PC300_PLX_WIN	0x80    /* PLX control window size (128b) */
+#define	PC300_RAMSIZE	0x40000 /* RAM window size (256Kb) */
+#define	PC300_SCASIZE	0x400   /* SCA window size (1Kb) */
+#define	PC300_FALCSIZE	0x400	/* FALC window size (1Kb) */
+
+#define PC300_OSC_CLOCK	24576000
+#define PC300_PCI_CLOCK	33000000
+
+#define BD_DEF_LEN	0x0800	/* DMA buffer length (2KB) */
+#define DMA_TX_MEMSZ	0x8000	/* Total DMA Tx memory size (32KB/ch) */
+#define DMA_RX_MEMSZ	0x10000	/* Total DMA Rx memory size (64KB/ch) */
+
+#define N_DMA_TX_BUF	(DMA_TX_MEMSZ / BD_DEF_LEN)	/* DMA Tx buffers */
+#define N_DMA_RX_BUF	(DMA_RX_MEMSZ / BD_DEF_LEN)	/* DMA Rx buffers */
+
+/* DMA Buffer Offsets */
+#define DMA_TX_BASE	((N_DMA_TX_BUF + N_DMA_RX_BUF) *	\
+			 PC300_MAXCHAN * sizeof(pcsca_bd_t))
+#define DMA_RX_BASE	(DMA_TX_BASE + PC300_MAXCHAN*DMA_TX_MEMSZ)
+
+/* DMA Descriptor Offsets */
+#define DMA_TX_BD_BASE	0x0000
+#define DMA_RX_BD_BASE	(DMA_TX_BD_BASE + ((PC300_MAXCHAN*DMA_TX_MEMSZ / \
+				BD_DEF_LEN) * sizeof(pcsca_bd_t)))
+
+/* DMA Descriptor Macros */
+#define TX_BD_ADDR(chan, n)	(DMA_TX_BD_BASE + \
+				 ((N_DMA_TX_BUF*chan) + n) * sizeof(pcsca_bd_t))
+#define RX_BD_ADDR(chan, n)	(DMA_RX_BD_BASE + \
+				 ((N_DMA_RX_BUF*chan) + n) * sizeof(pcsca_bd_t))
+
+/* Macro to access the FALC registers (TE only) */
+#define F_REG(reg, chan)	(0x200*(chan) + ((reg)<<2))
+
+/***************************************
+ * Memory access functions/macros      *
+ * (required to support Alpha systems) *
+ ***************************************/
+#ifdef __KERNEL__
+#define cpc_writeb(port,val)	{writeb((ucchar)(val),(ulong)(port)); mb();}
+#define cpc_writew(port,val)	{writew((ushort)(val),(ulong)(port)); mb();}
+#define cpc_writel(port,val)	{writel((uclong)(val),(ulong)(port)); mb();}
+
+#define cpc_readb(port)		readb(port)
+#define cpc_readw(port)		readw(port)
+#define cpc_readl(port)		readl(port)
+
+#else /* __KERNEL__ */
+#define cpc_writeb(port,val)	(*(volatile ucchar *)(port) = (ucchar)(val))
+#define cpc_writew(port,val)	(*(volatile ucshort *)(port) = (ucshort)(val))
+#define cpc_writel(port,val)	(*(volatile uclong *)(port) = (uclong)(val))
+
+#define cpc_readb(port)		(*(volatile ucchar *)(port))
+#define cpc_readw(port)		(*(volatile ucshort *)(port))
+#define cpc_readl(port)		(*(volatile uclong *)(port))
+
+#endif /* __KERNEL__ */
+
+/****** Data Structures *****************************************************/
+
+/*
+ *      RUNTIME_9050 - PLX PCI9050-1 local configuration and shared runtime
+ *      registers. This structure can be used to access the 9050 registers
+ *      (memory mapped).
+ */
+struct RUNTIME_9050 {
+	uclong	loc_addr_range[4];	/* 00-0Ch : Local Address Ranges */
+	uclong	loc_rom_range;		/* 10h : Local ROM Range */
+	uclong	loc_addr_base[4];	/* 14-20h : Local Address Base Addrs */
+	uclong	loc_rom_base;		/* 24h : Local ROM Base */
+	uclong	loc_bus_descr[4];	/* 28-34h : Local Bus Descriptors */
+	uclong	rom_bus_descr;		/* 38h : ROM Bus Descriptor */
+	uclong	cs_base[4];		/* 3C-48h : Chip Select Base Addrs */
+	uclong	intr_ctrl_stat;		/* 4Ch : Interrupt Control/Status */
+	uclong	init_ctrl;		/* 50h : EEPROM ctrl, Init Ctrl, etc */
+};
+
+#define PLX_9050_LINT1_ENABLE	0x01
+#define PLX_9050_LINT1_POL	0x02
+#define PLX_9050_LINT1_STATUS	0x04
+#define PLX_9050_LINT2_ENABLE	0x08
+#define PLX_9050_LINT2_POL	0x10
+#define PLX_9050_LINT2_STATUS	0x20
+#define PLX_9050_INTR_ENABLE	0x40
+#define PLX_9050_SW_INTR	0x80
+
+/* Masks to access the init_ctrl PLX register */
+#define	PC300_CLKSEL_MASK		(0x00000004UL)
+#define	PC300_CHMEDIA_MASK(chan)	(0x00000020UL<<(chan*3))
+#define	PC300_CTYPE_MASK		(0x00000800UL)
+
+/* CPLD Registers (base addr = falcbase, TE only) */
+/* CPLD v. 0 */
+#define CPLD_REG1	0x140	/* Chip resets, DCD/CTS status */
+#define CPLD_REG2	0x144	/* Clock enable , LED control */
+/* CPLD v. 2 or higher */
+#define CPLD_V2_REG1	0x100	/* Chip resets, DCD/CTS status */
+#define CPLD_V2_REG2	0x104	/* Clock enable , LED control */
+#define CPLD_ID_REG	0x108	/* CPLD version */
+
+/* CPLD Register bit description: for the FALC bits, they should always be 
+   set based on the channel (use (bit<<(2*ch)) to access the correct bit for 
+   that channel) */
+#define CPLD_REG1_FALC_RESET	0x01
+#define CPLD_REG1_SCA_RESET	0x02
+#define CPLD_REG1_GLOBAL_CLK	0x08
+#define CPLD_REG1_FALC_DCD	0x10
+#define CPLD_REG1_FALC_CTS	0x20
+
+#define CPLD_REG2_FALC_TX_CLK	0x01
+#define CPLD_REG2_FALC_RX_CLK	0x02
+#define CPLD_REG2_FALC_LED1	0x10
+#define CPLD_REG2_FALC_LED2	0x20
+
+/* Structure with FALC-related fields (TE only) */
+#define PC300_FALC_MAXLOOP	0x0000ffff	/* for falc_issue_cmd() */
+
+typedef struct falc {
+	ucchar sync;		/* If true FALC is synchronized */
+	ucchar active;		/* if TRUE then already active */
+	ucchar loop_active;	/* if TRUE a line loopback UP was received */
+	ucchar loop_gen;	/* if TRUE a line loopback UP was issued */
+
+	ucchar num_channels;
+	ucchar offset;		/* 1 for T1, 0 for E1 */
+	ucchar full_bandwidth;
+
+	ucchar xmb_cause;
+	ucchar multiframe_mode;
+
+	/* Statistics */
+	ucshort pden;	/* Pulse Density violation count */
+	ucshort los;	/* Loss of Signal count */
+	ucshort losr;	/* Loss of Signal recovery count */
+	ucshort lfa;	/* Loss of frame alignment count */
+	ucshort farec;	/* Frame Alignment Recovery count */
+	ucshort lmfa;	/* Loss of multiframe alignment count */
+	ucshort ais;	/* Remote Alarm indication Signal count */
+	ucshort sec;	/* One-second timer */
+	ucshort es;	/* Errored second */
+	ucshort rai;	/* remote alarm received */
+	ucshort bec;
+	ucshort fec;
+	ucshort cvc;
+	ucshort cec;
+	ucshort ebc;
+
+	/* Status */
+	ucchar red_alarm;
+	ucchar blue_alarm;
+	ucchar loss_fa;
+	ucchar yellow_alarm;
+	ucchar loss_mfa;
+	ucchar prbs;
+} falc_t;
+
+typedef struct falc_status {
+	ucchar sync;  /* If true FALC is synchronized */
+	ucchar red_alarm;
+	ucchar blue_alarm;
+	ucchar loss_fa;
+	ucchar yellow_alarm;
+	ucchar loss_mfa;
+	ucchar prbs;
+} falc_status_t;
+
+typedef struct rsv_x21_status {
+	ucchar dcd;
+	ucchar dsr;
+	ucchar cts;
+	ucchar rts;
+	ucchar dtr;
+} rsv_x21_status_t;
+
+typedef struct pc300stats {
+	int hw_type;
+	uclong line_on;
+	uclong line_off;
+	struct net_device_stats gen_stats;
+	falc_t te_stats;
+} pc300stats_t;
+
+typedef struct pc300status {
+	int hw_type;
+	rsv_x21_status_t gen_status;
+	falc_status_t te_status;
+} pc300status_t;
+
+typedef struct pc300loopback {
+	char loop_type;
+	char loop_on;
+} pc300loopback_t;
+
+typedef struct pc300patterntst {
+	char patrntst_on;       /* 0 - off; 1 - on; 2 - read num_errors */
+	ucshort num_errors;
+} pc300patterntst_t;
+
+typedef struct pc300dev {
+	void *if_ptr;		/* General purpose pointer */
+	struct pc300ch *chan;
+	ucchar trace_on;
+	uclong line_on;		/* DCD(X.21, RSV) / sync(TE) change counters */
+	uclong line_off;
+#ifdef __KERNEL__
+	char name[16];
+	hdlc_device *hdlc;
+
+	void *private;
+	struct sk_buff *tx_skb;
+	union {	/* This union has all the protocol-specific structures */
+		struct ppp_device pppdev;
+	}ifu;
+#ifdef CONFIG_PC300_MLPPP
+	void *cpc_tty;	/* information to PC300 TTY driver */
+#endif
+#endif /* __KERNEL__ */
+}pc300dev_t;
+
+typedef struct pc300hw {
+	int type;		/* RSV, X21, etc. */
+	int bus;		/* Bus (PCI, PMC, etc.) */
+	int nchan;		/* number of channels */
+	int irq;		/* interrupt request level */
+	uclong clock;		/* Board clock */
+	ucchar cpld_id;		/* CPLD ID (TE only) */
+	ucshort cpld_reg1;	/* CPLD reg 1 (TE only) */
+	ucshort cpld_reg2;	/* CPLD reg 2 (TE only) */
+	ucshort gpioc_reg;	/* PLX GPIOC reg */
+	ucshort intctl_reg;	/* PLX Int Ctrl/Status reg */
+	uclong iophys;		/* PLX registers I/O base */
+	uclong iosize;		/* PLX registers I/O size */
+	uclong plxphys;		/* PLX registers MMIO base (physical) */
+	uclong plxbase;		/* PLX registers MMIO base (virtual) */
+	uclong plxsize;		/* PLX registers MMIO size */
+	uclong scaphys;		/* SCA registers MMIO base (physical) */
+	uclong scabase;		/* SCA registers MMIO base (virtual) */
+	uclong scasize;		/* SCA registers MMIO size */
+	uclong ramphys;		/* On-board RAM MMIO base (physical) */
+	uclong rambase;		/* On-board RAM MMIO base (virtual) */
+	uclong alloc_ramsize;	/* RAM MMIO size allocated by the PCI bridge */
+	uclong ramsize;		/* On-board RAM MMIO size */
+	uclong falcphys;	/* FALC registers MMIO base (physical) */
+	uclong falcbase;	/* FALC registers MMIO base (virtual) */
+	uclong falcsize;	/* FALC registers MMIO size */
+} pc300hw_t;
+
+typedef struct pc300chconf {
+	sync_serial_settings	phys_settings;	/* Clock type/rate (in bps), 
+						   loopback mode */
+	raw_hdlc_proto		proto_settings;	/* Encoding, parity (CRC) */
+	uclong media;		/* HW media (RS232, V.35, etc.) */
+	uclong proto;		/* Protocol (PPP, X.25, etc.) */
+	ucchar monitor;		/* Monitor mode (0 = off, !0 = on) */
+
+	/* TE-specific parameters */
+	ucchar lcode;		/* Line Code (AMI, B8ZS, etc.) */
+	ucchar fr_mode;		/* Frame Mode (ESF, D4, etc.) */
+	ucchar lbo;		/* Line Build Out */
+	ucchar rx_sens;		/* Rx Sensitivity (long- or short-haul) */
+	uclong tslot_bitmap;	/* bit[i]=1  =>  timeslot _i_ is active */
+} pc300chconf_t;
+
+typedef struct pc300ch {
+	struct pc300 *card;
+	int channel;
+	pc300dev_t d;
+	pc300chconf_t conf;
+	ucchar tx_first_bd;	/* First TX DMA block descr. w/ data */
+	ucchar tx_next_bd;	/* Next free TX DMA block descriptor */
+	ucchar rx_first_bd;	/* First free RX DMA block descriptor */
+	ucchar rx_last_bd;	/* Last free RX DMA block descriptor */
+	ucchar nfree_tx_bd;	/* Number of free TX DMA block descriptors */
+	falc_t falc;		/* FALC structure (TE only) */
+} pc300ch_t;
+
+typedef struct pc300 {
+	pc300hw_t hw;			/* hardware config. */
+	pc300ch_t chan[PC300_MAXCHAN];
+#ifdef __KERNEL__
+	spinlock_t card_lock;
+#endif /* __KERNEL__ */
+} pc300_t;
+
+typedef struct pc300conf {
+	pc300hw_t hw;
+	pc300chconf_t conf;
+} pc300conf_t;
+
+/* DEV ioctl() commands */
+#define	N_SPPP_IOCTLS	2
+
+enum pc300_ioctl_cmds {
+	SIOCCPCRESERVED = (SIOCDEVPRIVATE + N_SPPP_IOCTLS),
+	SIOCGPC300CONF,
+	SIOCSPC300CONF,
+	SIOCGPC300STATUS,
+	SIOCGPC300FALCSTATUS,
+	SIOCGPC300UTILSTATS,
+	SIOCGPC300UTILSTATUS,
+	SIOCSPC300TRACE,
+	SIOCSPC300LOOPBACK,
+	SIOCSPC300PATTERNTEST,
+};
+
+/* Loopback types - PC300/TE boards */
+enum pc300_loopback_cmds {
+	PC300LOCLOOP = 1,
+	PC300REMLOOP,
+	PC300PAYLOADLOOP,
+	PC300GENLOOPUP,
+	PC300GENLOOPDOWN,
+};
+
+/* Control Constant Definitions */
+#define	PC300_RSV	0x01
+#define	PC300_X21	0x02
+#define	PC300_TE	0x03
+
+#define	PC300_PCI	0x00
+#define	PC300_PMC	0x01
+
+#define PC300_LC_AMI	0x01
+#define PC300_LC_B8ZS	0x02
+#define PC300_LC_NRZ	0x03
+#define PC300_LC_HDB3	0x04
+
+/* Framing (T1) */
+#define PC300_FR_ESF		0x01
+#define PC300_FR_D4		0x02
+#define PC300_FR_ESF_JAPAN	0x03
+
+/* Framing (E1) */
+#define PC300_FR_MF_CRC4	0x04
+#define PC300_FR_MF_NON_CRC4	0x05
+#define PC300_FR_UNFRAMED	0x06
+
+#define PC300_LBO_0_DB		0x00
+#define PC300_LBO_7_5_DB	0x01
+#define PC300_LBO_15_DB		0x02
+#define PC300_LBO_22_5_DB	0x03
+
+#define PC300_RX_SENS_SH	0x01
+#define PC300_RX_SENS_LH	0x02
+
+#define PC300_TX_TIMEOUT	(2*HZ)
+#define PC300_TX_QUEUE_LEN	100
+#define	PC300_DEF_MTU		1600
+
+#ifdef __KERNEL__
+/* Function Prototypes */
+int dma_buf_write(pc300_t *, int, ucchar *, int);
+int dma_buf_read(pc300_t *, int, struct sk_buff *);
+void tx_dma_start(pc300_t *, int);
+void rx_dma_start(pc300_t *, int);
+void tx_dma_stop(pc300_t *, int);
+void rx_dma_stop(pc300_t *, int);
+int cpc_queue_xmit(struct sk_buff *, struct net_device *);
+void cpc_net_rx(hdlc_device *);
+void cpc_sca_status(pc300_t *, int);
+int cpc_change_mtu(struct net_device *, int);
+int cpc_ioctl(struct net_device *, struct ifreq *, int);
+int ch_config(pc300dev_t *);
+int rx_config(pc300dev_t *);
+int tx_config(pc300dev_t *);
+void cpc_opench(pc300dev_t *);
+void cpc_closech(pc300dev_t *);
+int cpc_open(struct net_device *dev);
+int cpc_close(struct net_device *dev);
+int cpc_set_media(hdlc_device *, int);
+#endif /* __KERNEL__ */
+
+#endif	/* _PC300_H */
+